Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.4 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹42.9 L+₹99,600 (2.38%)Rejected-Finance | L2 | Rejected-Finance BEING NOT LOWEST | |
| 3 | L3₹43.4 L+₹1.5 L (3.56%)Rejected-Finance | L3 | Rejected-Finance BEING NOT LOWEST |
| Sl No | Description | Qty | Unit | JAIPAL AND BROTHERS L3 | M/S Davinder Kumar L1 | PRAHLAD NARAIN KOLI L2 |
|---|---|---|---|---|---|---|
| 1.00 | Taking down existing unserviceable rolling shutter complete of any size and any type and removing from site complete all as spd & directed. | 450 | Sqm | 10 ₹4,500 Lowest | 40 ₹18,000 | 50 ₹22,500 |
| 2.00 | S & F,rolling shutter with thickness of laths 1.25 mm including top cover, anchoring rod, hasp and staple, ball bearing, spring and one shop coat of primer and erect with gear operated type incl bevel gear box and crank handle, with 1.25 mm thick laths all as specified and directed. | 450 | Sqm | 2,300 ₹10,35,000 | 2,400 ₹10,80,000 | 1,950 ₹8,77,500 Lowest |
| 3.00 | Taking down rolling shutter push pull or manual type and re-fixing the same in position after necessary repairs such as cleaning , greasing, replacement of rusted nuts and bolts and necessary repair/replacement to dislocated curtain/laths with required welding/ grinding/resecuring/punching and making good any damage to the existing shutters of any size complete all as specified and directe | 35 | Each | 500 ₹17,500 Lowest | 800 ₹28,000 | 500 ₹17,500 Lowest |
| 4.00 | Taking down rolling shutter gear operated type with lever gear box and crank handle and re-fixing the same in position after necessary repairs such as cleaning , greasing, replacement of rusted nuts and bolts and necessary repair/replacement to dislocated curtain laths with required welding /grinding/resecuring/punching and making good any damage to the existing shutters of any size complete all as specified and directed. | 35 | Each | 600 ₹21,000 | 1,000 ₹35,000 | 500 ₹17,500 Lowest |
| 5.00 | S & F Gear box assembly for rolling shutter including rod, required nuts, bolts, cleats, crank handle etc. complete of standard make and fixed in position including one coat of primer including removal of old gear box assembly and other accessories all as specified and directed. | 35 | Each | 2,000 ₹70,000 | 1,500 ₹52,500 Lowest | 2,000 ₹70,000 |
| 6.00 | S & F suitable size steel ball bearing for smooth functioning of old rolling shutter complete all as spd & directed. | 50 | Each | 300 ₹15,000 Lowest | 300 ₹15,000 Lowest | 500 ₹25,000 |
| 7.00 | S & F steel spring of suitable size for old rolling shutter and including smooth functioning and removal of old steel spring from site all as directed. | 50 | Each | 500 ₹25,000 | 400 ₹20,000 Lowest | 500 ₹25,000 |
| 8.00 | M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of syntethic enamel paint complete all as spd & directed. | 900 | Sqm | 50 ₹45,000 | 38 ₹34,200 Lowest | 60 ₹54,000 |
| 9.00 | M&L for preparation of old steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of syntethic enamel paint complete all as spd & directed. | 2,000 | Sqm | 25 ₹50,000 Lowest | 38 ₹76,000 | 45 ₹90,000 |
| 10.00 | M&L for Ready Mix plaster 15mm thick on brick or concrete surface of internal and external walls finished even and fair surface without using extra cement complete all as specified and as directed. | 300 | sqm | 190 ₹57,000 | 180 ₹54,000 | 177 ₹53,100 Lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
1 Nov 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (West) Delhi Cantt-10.
GE (West) Delhi Cantt-10.
Repair/Replacement of Rolling shutters and connected items in OTM Accn in the area of AGE B/R-I under GE (West) Delhi Cantt-10
2025_MES_734754_1
GE/DW/TOKEN/97 OF 25-26
Open Tender
Civil Works
Item Rate
180 days
delhi
Class D Category a(i)
9 documents required · 9 mandatory
₹500
GE (West) Delhi Cantt
₹90,000
Yes
16 Dec 2025
11 Oct 2025
3 Nov 2025
11 Oct 2025
1 Nov 2025
26 Oct 2025
Amount
Taking down existing unserviceable rolling shutter complete of any size and any type and removing from site complete all as spd & directed.
S & F,rolling shutter with thickness of laths 1.25 mm including top cover, anchoring rod, hasp and staple, ball bearing, spring and one shop coat of primer and erect with gear operated type incl bevel gear box and crank handle, with 1.25 mm thick laths all as specified and directed.
Taking down rolling shutter push pull or manual type and re-fixing the same in position after necessary repairs such as cleaning , greasing, replacement of rusted nuts and bolts and necessary repair/replacement to dislocated curtain/laths with required welding/ grinding/resecuring/punching and making good any damage to the existing shutters of any size complete all as specified and directe
Taking down rolling shutter gear operated type with lever gear box and crank handle and re-fixing the same in position after necessary repairs such as cleaning , greasing, replacement of rusted nuts and bolts and necessary repair/replacement to dislocated curtain laths with required welding /grinding/resecuring/punching and making good any damage to the existing shutters of any size complete all as specified and directed.
S & F Gear box assembly for rolling shutter including rod, required nuts, bolts, cleats, crank handle etc. complete of standard make and fixed in position including one coat of primer including removal of old gear box assembly and other accessories all as specified and directed.
S & F suitable size steel ball bearing for smooth functioning of old rolling shutter complete all as spd & directed.
S & F steel spring of suitable size for old rolling shutter and including smooth functioning and removal of old steel spring from site all as directed.
M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of syntethic enamel paint complete all as spd & directed.
M&L for preparation of old steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of syntethic enamel paint complete all as spd & directed.
M&L for Ready Mix plaster 15mm thick on brick or concrete surface of internal and external walls finished even and fair surface without using extra cement complete all as specified and as directed.
M & L Rendering 5mm thick in ready mix on ceiling to be finished even and fair (without using extra lime or cement) as in patch works or whole work including taking down cement plaster complete all as specified and directed.
M&L for preparation of old treated brick surfaces of walls upto by scrubbing with wire brush, hard brush, washing down with water and applying two coats of cement paint, white or tinted over one coat of alkali resistant primer complete all as spd & directed.
M&L preparation old plastered surfaces of ceiling and applying two coats of white wash all as specified and directed.
M & L preparation of new surfaces plastered of wall two coats of distempering walls with distemper oil emulsion, white or tinted over a coat of primer complete all as specified and directed.
M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement based paint white or tinted ,complete all as specified.
M&L preparation of newly plastered surfaces and applying two coat of white wash on ceiling surface complete all as specified and as directed.
M&L for preparing surface of wall and applying two coat of oil bound distemper all as specified and directed.
Dismantling Brick tiles or terracing tiles, single layer on roofs including thatching any type, mud phuska etc including cleaning the surface by water/air pressure and removal of debrish beyond MOD land complete all as specified and directed. (Note height of bldg upto 4 story)
M&L for brushing neat cement slurry with 3.Kg of cement per sqm complete all as specified and directed. (Note height of bldg upto 4 story)
M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in roof padding/kerb, mud slopes, rounded or chamfered edge complete all as specified and directed. (Note height of bldg upto 4 story)
M&L for rendering 10mm thick cement mortar 1:4 on fair face of brick work or concrete surface complete all as specified and directed. (Note height of bldg upto 4 story)
M&L for water proofing treatment to roof surface with APP water proofing membrane 3mm thick & weighing not less than 3.0 kg/sqm of approved make black finish & reinforced with non woven polyester matt of min 150 gm/sqm laid over a coat of bitumen primer conforming to IS-3384 @ 0.4 Ltr/sqm over prepared roof surfaces, forcing overlap with a propane or a butane gas torch with a overlap of 100mm at sides & 100mm at ends & sealing as per manufacturer's instructions including two coat (i.e 0.2 ltr/Sqm) of aluminium paint entaire treated surface. (Note height of bldg upto 4 story) Note :- 1. Water proofing treatment shall be got carried out by the manufacturer or their authorised applicator only. 2. Bitumen primer, bitumen and membrane shall be of same make/manufacturer.
Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as spd & directed.
M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded agg) for plinth protection laid in bays and finished even and fair incl filling the joint with bitumen mastic including demolition of plinth protection complete all as specified and directed .
M&L for brick work in cement morta 1:6 using sub class B bricks, straight or curved on plan exc 6mtr mean radius complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and directed.
S&F false ceiling with powder coated GI grid of size 600x600 mm using main Tee of size 24x28x0.40mm prepunched to accept cross tee of size 24x28x0.40mm and wall angles of size 25x25x0.40mm fixed with wall around of size with and including 4mm thick fiber cement board white colour designer tiles as approved by GE of size 595x595 mm placed in the grid and held in position duly suspended by 4mm dia GI wire hanger from the roof with holding down clips, butter fly clips and necessary provision for light fixture etc complete as per manufacturers instructions complete all as spd & directed including dismantling old false ceiling any type.complete all as specified and directed.
M&L for providing PMM (Polymer modified cementitious mortar ) :-(i) Dry sub strate surface and free of debris & dust (ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes) (iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 25 mm thickness. Note: Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairely rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use.(iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufactuer complete all as specified and directed.
S&F 1000 Ltr rotational moulded polyethylene water storage tanks cylindrical vertical with closed top) hoisted and fixed in position including necessary fittings after dismantling of old tank all as specified and directed.
M&L 15mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor including taking up or down old steel tube complete all as spd and directed.
All as per item no 30 above but 20 mm bore tubing.
M&L for joist, channel, angle, MS tublar pipes or tee sections, fixed independently with or without connecting plates, cut to ordinary lenghts given including dismantling old iron scrap complete all as specified and directed.
S&F of Pre-painted galvalume aluminium zinc coating (150GSM) GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self-tapping screws including dismentling of AC sheet complete all as specified and as directed by Engr-in-Charge.
PRAHLAD NARAIN KOLI (BID ID -3469465)
JAIPAL AND BROTHERS (BID ID -3464845)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.55 MB
PS97.pdf
Tender Documents • 1.10 MB
BOQ_822739.xls
BOQ • 0.76 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .