OUTSOURCING OF SERVICES FOR MANNING AND OPERATION OF WATER SUPPLY ELECTRIC SUPPLY INSTALLATION AND OTHER MISC WKS

Amount

Outsourcing by providing Manning and Operation of LCA Pump House and LCA Fire Fighting installation by employing one FGM (Skilled) labours per Shift of 8 hrs for 3 shift, 24 Hrs per day, including Sunday and Holiday comprising the following work :- (a) Operating Pump sets 8.2 HP-02 No (b) Pump Set 62 HP-1 No. (c) Diesel driven pump set 62 HP-1 No (d) Jockey pump set 4 HP-1 No (e) Operation of DG set 62.5 KVA as required (f) Maintaining Log Book for Gen Set and pump sets (g) Maintaining adequate level of water storage in semi UG sump, OH reservoir, operation of valve for filling and distribution as directed. (h) Operators has to make necessary laison with operators at Booster pump house/ Kalpa Vihar pump house for maintaining required vevel of water storage in reservoir (j) Operator is responsible to maintain required chlorine residual to source as directed by Engineer-in-Charge. A cholorine measuring kit shall be available at installation and the cost of same is deemed to be included in the quoted rate. (k) Maintaining record of timing for supply of water complete all as specified and directed by Engineer-in-Charge

Note for Item No. 2 : The rate quoted shall be deemed to be included for the following provisions :- (a) No of shifts : Three shift per day

(b) No of labours : One Govt ITI qualified having minimum 04 years experience in relevant trade. (Shift timing 6.00 Hrs to 14.00 Hrs, 14.00 Hrs to 22.00 Hrs and 22.00 hrs to 06.00 Hrs)

(c) No RAR shall be admitted for payment if wage and attendance register of Trades personnel engaged are not produced alongwith RAR/ FB.

(d) No RAR shall be admitted for payment if copy of payment proof made through Adhar linked Bank Accounts of Trades personnel engaged by the contractor and same verified by the Engineer-in-Charge are not produced with RAR/ FB. Engineer-in-Charge shall be personally responsible to verify whether the contractor paying the minimum fair wages fixed by Government of In dia for Trade personnel.

(e) Wage paid by the contractor to the persons employed shall not be less than the minimum wages fixed by State/ Central Government from time to time whichever is higher.

(f) The contractor shall be responsible for the EPF, ESI, bonus, Safety etc. and insurance of all trademen employed by him as per existing Labour Rules/ Acts/ Regulations.

(g) Manpower employed by the contractor will be detailed in high security area, it will be the sole responsibility of the contractor to arrange security pass immediately after commencement of work to avoid interruption in smooth functioning of the installation.

(h) Tech qualification and experience certificate of all employed operators shall be submitted by the contractor to Engineer-in-Charge within the 10 days of Acceptance of tender.

(j) In case of manpower employed at any installations/ plant found absent from duty a fine of Rs. 1000.00 per shift will be recovered the dues of the contractor and no amount will be paid for that shift.

(k) The firm/ Contractor shall be solely and fully responsible to his employed manpower for any accident/ damage during maintenance and operation period. The department will not entertain any claim compensation etc. on this account and shall have no liability in this regard.

(l) The operating staff shall be capable for attending minor defects/ rectification. Necessary tools should be provided by the contractor without any extra cost.

(m) Duty staff will ensure popper upkeep and operation of all installed machinery and other electrical fittings, fixtures and proper shift wise operating record of each plant in log sheets duly signed by shift duty operator and contractor.

(n) Duty staff will maintain the installation, machinery, control panels and the premises clean and tidy and will report break downs or any affects immediately to the Engineer-in-Charge/ concern JE.

(o) DHPP (Diesel) shall be issued by department however, by using DG Operators diesel should be collected from AFS (MT)/ MES (MT) section and transportation upto DG installation by the contractor without any extra cost.

(p) The operating staff should record the voltages and amperes, consumption of diesel and readings etc., in the daily log sheet.

(q) It may be noted that contractor shall be sole responsible for any mishappening occurs including accident/ injury due to deploying of inexperience unskilled persons.

(r) Operator must be skilled & must have knowledge of operation & maintenance of Pump Sets, DG Sets, Panel etc.

(s) Consumable stores such as cotton waste, Grease including tools required shall be provided by the contractor.

(t) Operator must ensure cleanliness of Pump Sets/DG Sets/Panels.

(u) The rate quoted by the contractor shall be inclusive of Life insurance for the tradesmen employed by him in case of untoward incident such as injuries, fracture or casualty while on duty.

(v) Checking of leakage /water level in the radiator,checking of leakage of oil from the engine ,compressor etc, shall be carried out by the operator.

(w) Inform the JE/AGE E&M incharge of any electric faults, water supply failure, Diesel requirement for Gen Sets and any other mishappenings.

(x) Any Major repair of Machineries, replacement of batteries and filling of Diesel for Gen Set will be carried out by the MES

(y) Any other work, not specifically mentioned above, but ordered by the Engr-in-Charge for the smooth functioning of Pump House and supplying of water complete all as specified and directed

(z) The unit rate is deemed to be included for jungle clearance / surface dressing around 5 mtr from plinth protection.

Outsourcing by providing Manning & Operation of Main receiving DWR Sub Stn, MAFI - 1 & 2 Pole Sub Station at Technical Area by employing one Electrician (Skilled) per Shift of 8 hrs for 3 Shifts, 24 Hrs per day, including Sundays & Holidays, comprising the following works :- (i) Monitoring/operatting including replacing blown out fuses, as and when required, of Two/Four pole structure with Air break switches and expulsion fuse units - 2 Nos. (ii) Monitoring/ operatting HT 11 KV VCB/RMU Panels, indoor type - 03 Nos. (iii) Monitoring checking and watering Earthing system. (iv) Monitoring/operating as and when required LT Panel Boards with LT ACB and MCCBs & APFC Panel - 11 Nos (v) Monitoring/operatting Transformers and Isolation transformers - 6 Nos including checking oil level, silica gel in breather and leakage as directed.

Outsourcing by providing Manning & Operation of Power Station - 2 ( MAFI ) at Tech area by employing one Electrician (Skilled) per Shift of 8 hrs for 3 Shifts, 24 Hrs per day, including Sundays & Holidays, comprising the following works :- (i) Monitoring/ operatting HT 11 KV VCB Panel , 630 Amps,250 MVA,66 KA consisting of two incomming, one bus copler, one bus riser and two outgoing. indoor type- 01 No. (ii) Monitoring checking and watering Earthing system. (iii) Monitoring/operating as and when required LT Panel Boards with LT ACBs and MCCBs & APFC Panel - 4 Nos (iv) Monitoring/operatting Transformer - 1 No and Isolation Transformer -01 No including checking oil level, silica gel in breather and leakage as directed (v) Monitoring/ operatting of DG set (vi) Maintaining Log Book for Installation.

Outsourcing by providing Manning & Operation of DG Sets at LCA Hangers by employing one FGM (Skilled) per shift of 8 hrs for 3 Shifts, 24 Hrs per day, including Sundays & Holidays, comprising the following works :- (i) Operating Diesel Gen Set 03 Nos 810 KVA during electric supply failure. (ii) Maintain DG Set synchorise panel always in working condition. (iii) Monitoring/ operating 03 No compact sub stn 630 KVA. (iv) Monitoring/operating as and when required LT Panel Boards with LT ACBs and MCCBs & APFC Panel - 6 Nos

Note for Item No. 3 to 5 : The rate quoted shall be deemed to be included for the following provisions :- (a) No of shifts : Three shift per day

(b) No of labours : One Govt ITI qualified having minimum 04 years experience in relevant trade i.e. skilled electricians for each shift. (Shift timing 6.00 Hrs to 14.00 Hrs, 14.00 Hrs to 22.00 Hrs and 22.00 hrs to 06.00 Hrs)

(c) No RAR shall be admitted for payment if wage and attendance register of Trades personnel engaged are not produced alongwith RAR/ FB.

(d) No RAR shall be admitted for payment if copy of payment proof made through Adhar linked Bank Accounts of Trades personnel engaged by the contractor and same verified by the Engineer-in-Charge are not produced with RAR/ FB. Engineer-in-Charge shall be responsible to verify whether the contractor paying the minimum fair wages fixed by Government of In dia for Trade personnel.

(e) Wage paid by the contractor to the persons employed shall not be less than the minimum wages fixed by State/ Central Government from time to time whichever is higher.

(f) The contractor shall be responsible for the EPF, ESI, bonus, Safety etc. and insurance of all trademen employed by him as per existing Labour Rules/ Acts/ Regulations.

(g) Manpower employed by the contractor will be detailed in high security area, it will be the sole responsibility of the contractor to arrange security pass immediately after commencement of work to avoid interruption in smooth functioning of the installation.

(h) Tech qualification and experience certificate of all employed operators shall be submitted by the contractor to Engineer-in-Charge within the 10 days of Acceptance of tender.

(j) In case of manpower employed at any installations/ plant found absent from duty a fine of Rs. 1000.00 per shift will be recovered the dues of the contractor and no amount will be paid for that shift.

(k) The firm/ Contractor shall be solely and fully responsible to his employed manpower for any accident/ damage during maintenance and operation period. The department will not entertain any claim compensation etc. on this account and shall have no liability in this regard.

(l) The operating staff shall be capable for attending minor defects/ rectification. Necessary tools should be provided by the contractor without any extra cost.

(m) Duty staff will ensure proper upkeep and operation of all installed machinery and other electrical fittings, fixtures and proper shift wise operating record of each plant in log sheets duly signed by shift duty operator and contractor.

(n) Duty staff will maintain the installation, machinery, control panels and the premises clean and tidy and will report break downs or any affects immediately to the Engineer-in-Charge/ concern JE.

(o) DHPP (Diesel) shall be issued by department however, by using DG Operators diesel should be collected from AFS (MT)/ MES (MT) section and transportation upto DG installation by the contractor without any extra cost.

(p) The operating staff should record the voltages and amperes, consumption of diesel and readings etc., in the daily log sheet.

(q) It may be noted that contractor shall be sole responsible for any mishappening occurs including accident/ injury due to deploying of inexperience unskilled persons.

(r) Operator must be skilled & must have knowledge of operation & maintenance of AC Plants, DG Sets, Panel etc.

(s) Consumable stores such as cotton waste, Grease including tools required shall be provided by the contractor.

(t) Operator must be skilled & must have knowledge of operation & maintenance of Electrical Sub Stns including VCBs, Transformers, Pump Sets, DG Sets, Panel etc.

(u) Consumable stores such as cotton waste, Grease including tools required shall be provided by the contractor

(v) Operator must ensure cleanliness of VCBs, Transformers, Pump Sets/DG Sets/Panels

(w) The rate quoted by the contractor shall be inclusive of Life insurance for the tradesmen employed by him in case of untoward incident such as injuries, fracture or casualty while on duty.

(x) Carrying out minor repairs viz. replacing blown out fuses, recharging MCCBs, priming of pumps, repair to pipe lines as directed.

(y) Inform the JE/AGE E&M inchrge of any electric faults, water supply failure, Diesel requirement for Gen Sets and any other mishappenings.

(z) Any Major repair of Machineries, replacement of batteries and filing of Diesel for Gen Set will be carried out by the MES

(aa) Any other work, not specifically mentioned above, but ordered by the Engr-in-Charge for the smooth functioning of Sub Station, Pump House and supplying of Electricity/water.

Outsourcing by providing Manning & Operation of AC plants 3 x 16.5 TR capacity Air cooled Package type make GEA incl the Electrical control panel LT etc at OPERA-I by engaging one Refg Mech (Skilled) per Shift of 8 hrs for 3 Shifts, 24 Hrs per day, including Sundays & Holidays , including the following works :- (a) Operating Diesel Gen Set 125 KVA during Electric Supply failiure (b) Maintaining Log Book for Gen Set & AC Plants. (c) Carrying out minor repairs viz. replacing blown out fuses, recharging MCCBs as directed. Note:-(i) OPERA-I-Operating of two Nos AC plants, Compressor Sets and related Condensers, AHUs shall be carried out simultaneously at one time with the third one as Stand by on a Rotation Basis each not exceeding 12 hours working at a stretch all as directed by Engr-in-charge.

Outsourcing by providing Manning & Operation of AC plants 15 TR capacity - 2 Nos at SEW and CRRW and 12 TR capacity- 2 No at OTF and AVRO Hanger Air cooled Package type make GEA and 2 x 8.5 TR at P-15 (clean room) bldg Make-Blue Star incl the Electrical control panel LT etc at CRRW Complex by engaging one Refg Mech (Skilled) per Shift of 8 hrs for 3 Shift, 24 Hrs per day, including Sundays & Holidays, including the following works :- (a) Operating Diesel Gen Set 20 KVA & 62.5 KVA during Electric Supply failiure (b) Maintaining Log Book for Gen Set & AC Plants. (c) Carrying out minor repairs viz. replacing blown out fuses, recharging MCCBs as directed.

Note for Item No. 6 & 7 : The rate quoted shall be deemed to be included for the following provisions :- (a) No of shifts : Three shift per day

(b) No of labours : One Govt ITI qualified having minimum 04 years experience in relevant trade i.e. Refrigerator/ AC Machnic for each shift. (Shift timing 6.00 Hrs to 14.00 Hrs, 14.00 Hrs to 22.00 Hrs and 22.00 hrs to 06.00 Hrs)

(c) No RAR shall be admitted for payment if wage and attendance register of Trades personnel engaged are not produced alongwith RAR/ FB.

(d) No RAR shall be admitted for payment if copy of payment proof made through Adhar linked Bank Accounts of Trades personnel engaged by the contractor and same verified by the Engineer-in-Charge are not produced with RAR/ FB. Engineer-in-Charge shall be personally responsible to verify whether the contractor paying the minimum fair wages fixed by Government of In dia for Trade personnel.

(e) Wage paid by the contractor to the persons employed shall not be less than the minimum wages fixed by State/ Central Government from time to time whichever is higher.

(f) The contractor shall be responsible for the EPF, ESI, bonus, Safety etc. and insurance of all trademen employed by him as per existing Labour Rules/ Acts/ Regulations.

(g) Manpower employed by the contractor will be detailed in high security area, it will be the sole responsibility of the contractor to arrange security pass immediately after commencement of work to avoid interruption in smooth functioning of the installation.

(h) Tech qualification and experience certificate of all employed operators shall be submitted by the contractor to Engineer-in-Charge within the 10 days of Acceptance of tender.

(j) In case of manpower employed at any installations/ plant found absent from duty a fine of Rs. 1000.00 per shift will be recovered the dues of the contractor and no amount will be paid for that shift.

(k) The firm/ Contractor shall be solely and fully responsible to his employed manpower for any accident/ damage during maintenance and operation period. The department will not entertain any claim compensation etc. on this account and shall have no liability in this regard.

(l) The operating staff shall be capable for attending minor defects/ rectification. Necessary tools should be provided by the contractor without any extra cost.

(m) Duty staff will ensure popper upkeep and operation of all installed machinery and other electrical fittings, fixtures and proper shift wise operating record of each plant in log sheets duly signed by shift duty operator and contractor.

(n) Duty staff will maintain the installation, machinery, control panels and the premises clean and tidy and will report break downs or any affects immediately to the Engineer-in-Charge/ concern JE.

(o) DHPP (Diesel) shall be issued by department however, by using DG Operators diesel should be collected from AFS (MT)/ MES (MT) section and transportation upto DG installation by the contractor without any extra cost.

(p) The operating staff should record the voltages and amperes, consumption of diesel and readings etc., in the daily log sheet.

(q) It may be noted that contractor shall be sole responsible for any mishappening occurs including accident/ injury due to deploying of inexperience unskilled persons.

(r) Operator must be skilled & must have knowledge of operation & maintenance of AC Plants, DG Sets, Panel etc.

(s) Consumable stores such as cotton waste, Grease including tools required shall be provided by the contractor.

(t) Operator must ensure cleanliness of AC Plants/DG Sets/Panels.

(u) The rate quoted by the contractor shall be inclusive of Life insurance for the tradesmen employed by him in case of untoward incident such as injuries, fracture or casualty while on duty.

(v) Inform the JE/AGE E&M inchrage of any electric faults, water supply failure, Diesel requirement for Gen Sets and any other mishappenings.

(w) Any Major repair of Machineries, replacement of batteries and filing of Diesel for Gen Set will be carried out by the MES.

(x) Any other work, not specifically mentioned above, but ordered by the Engr-in-Charge for the smooth functioning of AC Plants and DG Sets.

Maintenance and running of Tractor with Jungle jim for Grass / Vegetation cutting along the Runway sides all as directed by engaging FGM (Skilled) Jungle Jim operator in general shift from 0900 to 1700 Hrs, excluding Sundays & Holidays, including the following works :- (a) Operating Jungle Jim as directed (b) Maintaining Log Book for Jungle Jim. Note : - (i) Rate quoted shall be deemed to consider for 01 shift (General Shift) of 08 hours per day (ii) The Operator shall have a valid driving licence for operating the Tractor and Jungle jim. (iii) The Operator shall carry out routine day to day and periodical maintenance of plant and equipment to ensure uninterrupted operation all as directed by Engineer-in-Charge. (iv) Diesel required for running the Tractor will be filled by the Department.

Supply, installation, testing & commissioning of maintenance free chemical earthing system comprising 17mm dia copper bonded rod 3 mtr long horizontally pre welded T-terminal rod with provision for connection size of 50 x 150mm long, 6mm thickness with equal space either side, with 12mm dia hole of 02 numbers each on either side of the terminal clamp with 250 microns (average) coating thickness, tested and certified by CPRI India alongwith 50 kg earth energizer compound and 10 litres earth resistance reducing liquid. The earthing energizer compound and resistance reducing earthing liquid shall be tested as per IEC-62561-7 read with ASTM G57-06, CI 3.4 A by any NABL accredited lab. The above mentioned rod shall be installed in 8-10 inch bore, 12 feet depth with a distance of minimum 3 meters between each installation. Make : Model HTSP 3I7 of safeTrode or equivalent in JEF ECO safe earthing, JMV LPS Ltd/ OBO Betterman/ ENNOV/ERICO.

The quoted rate shall also deemed to be included the following :- (i) Prior to installation of maintenance free chemical earthing, soil resistivity test to be carried out at the location where earthing work to be done in presence of Engr-in- Charge/JE (E/M),user and the report has to submit to Garrison Engineer with recommendation of manufacturer, if required additional interconnection of earthing (not more than 04 number of earthing) to achive earth result less then 1 Ohms. The arrangement done for soil resistivity testing and submission of report with recommendation deemed to be included in the quoted rate.

(ii) Rate of earth energizer compound of 25 Kg of 02 bags and earth resistance reducing liquid 10 litre in 02 canes (5 ltrs per cane) for each pit deemed to be included in the quoted rate.

(iii) Copper strip of size 20 x 3 mm should be fixed on proper post insulator at the instrument end ( The rate of earthing strip up to 7.5 Mtrs is included in the quoted rate).

(iv) The electrode shall carry manufacturer's name .

(v) The connection clamp shall be permanentlly welded to the copper bounded rod to avoid any kind of connectivity loss,.The pre-welded copper bounded rod shall not need any additional clamp for termination.

(vi) Testing of earth shall be carried out along with the departmental and user representative and report shall be submitted to Garrison Engineer for his entire satisfaction.

(vii) The contractor shall submit CPRI India certified document for copper bonded rod to ensure genuity of material.

(viii) Earth resistance tester will be provided by the contractor. Tester should be calibrated from authorised company/ lab.

(ix) Sign board of mild steel 2 mm thick duly painted with two coats of synthetic enamel paint over a coat of red oxide Zinc chrome primer showing result of earthing should be fixed near the earth pit after completion as directed by engr -in- charge.

(x) Earth work such as auguring and making good the surrounding area shall carried out in any type of soil.

(xi) The contractor shall given a written guarantee of minimum three years for maintaining the earth resistance less than 1 Ohm after certified date of completion.

(xii) A security deposit of value equal to 2.5 % of the rate quoted for chemical earthing per each earthing shall be retained from payment due to the contractor for the guarantee period.

(xiii) Earthing shall be tested after completion of work by the contractor in presence of Engr-in-charge, user and proper record shall be maintened duly signed by all concerned. After testing if the desired earth resistance of less than 1 Ohm is not obtained, the earthing will be redone at no extra cost to Govt. till desired result is obtained.

(xiv) Resistivity of earth energizer compound and resistance reducing earthing liquid shall be certified by any NABL accredited lab carried out as per IEC-62561-7 read with ASTMG57-06, CI-3.4A and the certificate of same shall be submitted by the contractor before commencement of work.

Supply and fixing Earth pit cover made of heavy duty poly plastic of high grade polypropylene tested and certified by any NABL accredited lab for load bearing capacity not less than 9.2 tonnes with top dia not less than 250mm, bottom dia not less than 330 mm and height not less than 260 mm dia for each electrode pit complete all as specified and directed. Make : Model SEPC 250 of SAFE TRODE or equivalent in JEF ECO safe earthing, JMV LPS Ltd, OBO Betterman/ ENNOV/ERICO. Note :- The contractor shall submit load bearing capacity certificate from the manufacturer.

Supply, installation, commissioning and testing of Factory assembled, Floor mounted, free standing, type tested LT Feeder Pillar Panels, with canopy, as per electrical specifications for outdoor installation, to be made of IP65 Polycarbonate modular enclosures. The Enclosures made of Polycarbonate, should be weather/ vermin proof, anti-acid, anti-corrosive, UV resistance in accordance with IEC 61439-1, Fire retardant and Self-extinguishing in accordance with IEC 60695-2-11, UL subject 94 for flammability V-0, should pass glow wire test for 960° in accordance with 60695-2-11. Degree of protection against mechanical load should be IK 08 (5 Joule) in accordance with IEC 62262, IP 65 in accordance with IEC 60529 & IEC60439-1, should have Dielectric Properties, RoHS compliant & Halogen free. The manufacturer of boards/panel shall submit a copy of type test reports as per above-mentioned norms from UL/ERDA/CPRI/NABL labs in India. The panels should be modular and compartmentalized in construction with opaque and transparent doors, properly tightened to base with thermoplastic screws having sealing gaskets of extruded silicon rubber to withstand adverse weather effects. The depth of modular enclosures should be above 200mm for air circulation & to minimize temp rise. Panel should be fitted with 01 No polycarbonate IP 65, 9W LED translucent bulk head luminaire, 6500K, PF > 0.95 under canopy for easy maintenance. Panel should be fitted outside with 01 No of 16A 3P IP 65 industrial socket and 01 No of 32A 5P IP 65 industrial socket. 3 phase and neutral 600 amps current carrying capacity copper bus bar insulated with colour coded heat shinkable sleeves with SMC/DMC insulators, complete with the following switch gears and mounting the panel board on ground with PCC (1:3:6) bedding upto a height of 45 cm above ground level, including dismantling and taking out old u/s LT Panel Board and remove from site reconnecting existing LT Cables with new panel board complete all as directed :-

Copper strip of size 20 x 3 mm should be fixed on proper post insulator at the instrument end

Excavation in trenches exe 1.5m depth and n exc 1.5 mtr in wide in hard/dense soil and getting out.

Removing of excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point.

Riddling Sand obtained from excavation for cable protection 8cm under the cable and 15cm above the cable in trench and get the thick layer of 18cm after ramming. Note :- In case sufficient sand not obtained from excavation, the required additional qty obtain from out side land as directed by the Engineer-in-Charge. The rate is deemed to be included.

Fly ash cable protection cover of size 23x11.5 x7.5cm including taking down existing bricks of any size.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in hard and dense soil

XLPE insulated,screened ,PVC Bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with aluminium condutor 1100Volts grade cross sectional area 185 Sqmm 3.5 core laid in trenches /ducts/fixed to wall/pole/ inside panel/ drawn through pipe including cable glands and terminal sockets, taking down existing cable etc all as specified and directed. Note : Excavation and earth work shall be measured and paid seperately. Make : KEI/ Polycab/Havells

XLPE insulated,screened ,PVC Bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with aluminium condutor 1100Volts grade cross sectional area 95 Sqmm 3.5 core laid in trenches /ducts/fixed to wall/pole/ inside panel/ drawn through pipe including cable glands and terminal sockets, taking down existing cable etc all as specified and directed. Note : Excavation and earth work shall be measured and paid seperately. Make : KEI/ Polycab/ Havells

100 mm bore of pipe high density polyethylene pipes (HDPE) of pressure rating 6 kgf/ cm2 laid in trenches for cable protection passing under road/ floor or for fixing to poles including taking down existing pipe complete all as specified and directed

Cable jointing kit for 1.1 KV grade cable for outdoor stright through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armored aluminium conductor cable of size 95 sqmm to 120 sqmm Make : Reychems, Densons

XLPE insulated, screened, PVC Bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with aluminium condutor 1100Volts grade cross sectional area 240 Sqmm 3.5 core laid in trenches /ducts/fixed to wall/pole/ inside panel/ drawn through pipe including cable glands and terminal sockets, taking down existing cable etc all as specified and directed. Note : Excavation and earth work shall be measured and paid seperately. Make : KEI/ Polycab/Havells

80 mm bore of pipe high density polyethylene pipes (HDPE) of pressure rating 6 kgf/ cm2 laid in trenches for cable protection passing under road/ floor or for fixing to poles including taking down existing pipe complete all as specified and directed

Cable jointing kit for 1.1 KV grade cable for outdoor stright through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armored aluminium conductor cable of size 150 sqmm to 185 sqmm Make : Reychems, Densons

Supply & Fix in replacement, On Load Change Over Switches, 250 Amps 4 Pole 415 Volt AC 50 Hz with outdoor type weather/vermin proof, made in Electrical Grade IP65 Polycarbonate Enclosure, should be dust, water & all weather proof, as per IEC 60529, Flame Retardant UL94V0, GWIT 960 Deg C, UV Protected. It should be floor/wall mounted and mounting the box on ground with PCC (1:3:6) bedding upto a height of 45 cm above ground level or wall mounting by using suitable size of clamps, nuts, bolts and washers of following ratings including connecting up using suitable size of lugs and taking down old item all as directed. (Make : C&S, L&T, Hansel, Grasp)

XLPE insulated,screened ,PVC Bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with aluminium condutor 1100Volts grade cross sectional area 120 Sqmm 3.5 core laid in trenches /ducts/fixed to wall/pole/ inside panel/ drawn through pipe including cable glands and terminal sockets, taking down existing cable etc all as specified and directed. Note : Excavation and earth work shall be measured and paid seperately. Make : KEI/ Polycab/ Havells

Supply, installation, commissioning and testing of Factory assembled, Floor mounted, free standing, type tested LT Feeder Pillar Panels, with canopy, as per electrical specifications for outdoor installation, to be made of IP65 Polycarbonate modular enclosures. The Enclosures made of Polycarbonate, should be weather/ vermin proof, anti-acid, anti-corrosive, UV resistance in accordance with IEC 61439-1, Fire retardant and Self-extinguishing in accordance with IEC 60695-2-11, UL subject 94 for flammability V-0, should pass glow wire test for 960° in accordance with 60695-2-11. Degree of protection against mechanical load should be IK 08 (5 Joule) in accordance with IEC 62262, IP 65 in accordance with IEC 60529 & IEC60439-1, should have Dielectric Properties, RoHS compliant & Halogen free. The manufacturer of boards/panel shall submit a copy of type test reports as per above-mentioned norms from UL/ERDA/CPRI/NABL labs in India. The panels should be modular and compartmentalized in construction with opaque and transparent doors, properly tightened to base with thermoplastic screws having sealing gaskets of extruded silicon rubber to withstand adverse weather effects. The depth of modular enclosures should be above 200mm for air circulation & to minimize temp rise. Panel should be fitted with 01 No polycarbonate IP 65, 9W LED translucent bulk head luminaire, 6500K, PF > 0.95 under canopy for easy maintenance. Panel should be fitted outside with 01 No of 16A 3P IP 65 industrial socket and 01 No of 32A 5P IP 65 industrial socket. 3 phase and neutral 600 amps current carrying capacity copper bus bar insulated with colour coded heat shinkable sleeves with SMC/DMC insulators, complete with the following switch gears and mounting the panel board on ground with PCC (1:3:6) bedding upto a height of 45 cm above gorund level, including dismantling and taking out old u/s LT Panel Board and remove from site reconnecting existing LT Cables with new panel board complete all as directed :-

Supply, install, testing and commissioning of energy conversion digital grounding apparatus three phase 4 wire 240 KA with inbuilt 100% lighting surge protection, noises, ESD, EPR and abnormal electrical characteristics which enter power and other service lines and ensuring clear bonding potential (Earth to neutral voltage) less than 1.0 volt to be connected in parallel to the circuit, conforming to IE, tested and certified as per latest certification (IEC 61643-1, IEC-61000-4-5, IEC-61000-6-1, IEC-61000-6-3, MIL-STD-810-G, ISO 14001-2004) in prewired metal enclosure with pulverulent body painting including all accessories required for installation etc complete all as specified and as directed. Make : Ground Co ltd Model No eca 3 G LP-34-40 of equivalent.

M&L Earthing with Galvanised Earth Plate Electrode 600x600x 6mm thick burried directly in Ground (Earth Pit not less than 2.25 Metre below Ground Level) with Top edge of the Plate not less than 1.50 Metre below Ground Level, connected with Galvanised Earth Strip of size 25 x 6mm by means of Bolts, Nuts, Check Nuts and Washers of GI or Steel and connected Earthing Testing Point/Bus-bar including GI 40mm bore (dia) light grade Protection Pipe, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt, magnesium sulphate (1 : 1 : 0.5) in alternate layers of not exc 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50 mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, Funnel with GI Watering Pipe 20mm bore (dia) medium grade including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion including taking down old unserviceable one, complete all as per specified and as directed.

Note :- (a) All Joints should be joined by Exothermic Welding or Brazing.

(b) After completion of work earthing shall be tested by the contractor in presence of Engineer-in-Charge, User and proper record shall be maintained duly signed by all concerned.

(c) Earth resistance tester should be calibrated from authorised company/ lab.

(d) After testing if desired earth resistance of less than 5 Ohm is not obtained, the earthing will be redone at no extra cost to Govt till desired result is obtained.

ABHISHEK CONSTRUCTIONS

eurekaenterprises

devan enterprises

C R R CONSTRUCTIONS

Neptune Engineers and Builders

Sai Ram Builders

Lucky Enterprises