ADDN ALTN/ SPECIAL REPAIR TO TOILET AND KITCHENS TO CERTAN MD ACCN AT OCV TIPU VIHAR, KP VIHAR AND WATER TANKS PIPELINES AT CERTAIN OTM ACCN OF MED REGT AT MIL STN KALUCHAK UNDER GE KALUCHAK.

Amount

M&L for sunken treatment with glass fiber reinforced modified cementitious coating system before the final coat of Latex Shield 2K (or equivalent) complete all as following :- Base Coat : Berger HS Latex plus (or equivalent) consumption base coat : 0.3 kg/m2 Reinforcement : Glass fiber Second and Third coat : Latex sheild 2K (or equivalent) Consumption top coat : 3 kg/m2 System reqquirements : density : 2.00 kg/ltr; Compressive strength: 0.5N/mm2 Wall penetration through the RCC slab must be sealed using Berger HS Repair (or equivalent). Intersection of base slab with wall must be provided with a 50 mm fillet using Berger HS Latex plus (or equivalent) modified mortar with a bonding coat of Berger HS Latexplus (or equivalent) modified cement slurry upto sft. All depressions, unevenness, surface honeycombng shal be repaired using Berger HS Latex plus (or equivalent) modifiled polymer mortar with a bonding coat of Berger HS latex plus (or equivalent) modified cement slurry. Including cleaning of RCC surface to remove dust, loose paricles, etc with compressed air or any other suitable technique depending on site conditions, grinding aby sharp edges, etc. Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix 'CD' on page no. 92 of tender documents as per Sch 'A' Note No 19 Page No 17).

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 with water proofing compound tobe finished even and smooth without using extra cement complete all as specified and as directed (WPC to be measured & paid separately)

Supply only Integral water proofing compound liquid complete all as specified and as directed

S&F 20mm dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in as spout pipes to pour out residual water out from the treated area complete all as specified and as directed

M&L for hard core, of broken bricks broken to gauge n exc 63mm for laying sub base of thickness 150mm complete all as specified and directed.

M&L Cement concrete type D-2 1:4:8 (40mm graded crushed stone aggregate) in foundations, filling and mass concrete in sub base complete all as specified and as directed

M&L for 25mm thick PCC (1:2:4) type B1 with 20mm graded aggregate for laying floor tiles complete all as specified and as directed.

M&L for non skid coloured Ceramic tiles 8 to 10 mm thick in light shade (square/ rectangular) polished, area of each tiles exc 0.11 sqm but not exceeding 0.18 sqm, in floors/Skirting etc. set, jointed and pointed with Berger HS tile adhesive anti slip white @1.2kg/sqm thickness upto 8 to 10mm (or equivalent) and epoxy material for sealing of tile joints with Berger HS Epoxy tile grout(or equivalent) to the floor of toilets and bathroom complete all as specified and as directed.

Demolition of cement concrete in and paving (un reinforced) exc. 15 cm. thickness, below or above ground level, including removal of waste from defence land and dumping at a place as specified by civil authorities complete all as specified

M & L for Glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed.

Supply and fix in repair Vitreous china EWC wash down water closet pan (Pedestal pattern), white including 'P' or 'S' trap with white seat cover with flat bottom and mild steel CP hinging device, CP jet nozzle with 1500mm long PVC pipe, & including health faucet of mild steel for CP 15 mm dia of pipe with 1.25m long and complete all as specified and directed.

Supply and fix in repair PVC valve less, syphonic action type flushing cistern,10 ltrs capacity low level, white, with inlet ball valve, float and handle including PVC connection 15 mm size with PTMT nuts of length 600 mm long complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections including cleaning, threading for refixing or removal to store, complete all as specified and as directed.

M & L for cutting chases in brick wall, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 20cm girth complete, all as specified and as directed.

Supply & fix CPVC (Chlorinated poly vinyl chloride) pipes, bore (inner dia) of pipe in 15 mm of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe Note :- The rate for pipe including all pipe fittings such as ends, elbows, unions, tees reducing tees, adapters, sockets, plugs, house clips as well as brass threaded fittings for all opening/connections such as Bib taps/Stop valve etc.

S & F for bib tap, 15mm bore long body, fancy type, chromium plated, cast copper alloy with capstan head, screwed down, screwed for iron pipe or for brass ferrule, fixed in repairs, complete all as specified & directed.

S & F stop/angle valves, cast copper alloy, 15mm bore (concealed type), screwed down, high pressure with capstan head, both ends screwed for iron pipe or for union etc., fixed in repairs, complete all as specifed & directed.

S & F in Brass chromium plated shower rose of 125mm size with or without swivel joints, fixed in repairs, complete all as specified & directed.

Supply and fixed in repair PVC connections 15mm size with PTMT nuts of length 450mm, fixed in repairs, complete all as specified & directed.

Supply and fix in repair PVC (SWR) floor trap75 mm, with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and as directed.

Taking down cement plaster on bricks or stone wall/ decayed surfaces of concrete from roof projection or RCC Chajjas etc. including racking out joints, hacking for key, scrubbing down with water, etc including removing the waste out of defence land complete all as specified and as directed.

M&L Rendering 15 mm thick on fair faces of brick/concrete surfaces in cement plaster 1:4, using water proofing compound mix as per manufacturer detail, complete all as specified and as directed. (WPC measured and paid seperately)

S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to wall /floor complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) bend any radius with or without access door complete all as specified and directed.

S & F of 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to wall /floor complete all as specified and directed.

S & F of 75 mm bore PVC (SWR) bend any radius with or without access door complete all as specified and directed.

Supply and fix in repair Stainless steel sink with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever cast iron bracket, connecting union, waste coupling, plug & chain, 40mm dia PVC flexble waste pipe etc. and overall size 915x460mm with bowl size 410x330x160mm, complete all as specified & directed.

Supply and fix in repair Vitreous china, wash hand basin, flat back, white of size 580mmx450mm white flat back including cast iron brackets, cutting for and pinning the ends of brackets or erecting on stand incl 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated and 32mm bore brass chromium plated waste coupling with long screed shank and fly nuts PVC flexible waste pipe of bore 32mm and adequate length, 15mm bore PVC connection pipe 450mm long with brass nuts on both side, complete all as specified and directed.

Supply & fied in Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered `Hot’ or `Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore, fixed in repair complete all as specified & directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as specified & directed.

S & F of solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S & F in repairs Aluminum Handle cast type anodized of size 100mm complete all as specified and directed.

S & F Butt hinges, medium weight, cold rolled mild steel, 100 mm size, complete all as specified and directed.

S & F Aluminum anodized barrel tower bolt of extruded section and fixed complete of Size 100 mm long complete all as specified and directed.

M & L for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification in SSR Part-I complete all as specified and directed.

M & L for 18 – 20 mm thick machine cut black granite stone slab as in wall or vertical surface, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab including necessary cutting, grinding, rubbing, polishing rounding to exposed edges and including 15 mm thick rendering in cement mortar 1:4, complete all as specified & directed.

S&F of stainless steel plate rack of size 750x600x250mm made out of AISI 304 stainless steel 1.00 mm thick having partitions as per sample kept in AGE office including brass/stainless steel screws for fixing of partitions, nuts, bolts, washers and fittings, complete all as specified & directed.

Supply & Fixed in repairs of Brass CP Towel rail , 20mm dia, D type, 60cm long between flanges, fixed in repairs, complete all as specified & directed.

Supply and fix in repair CP soap dish complete all as specified and directed.

S & F in repair brass CP wall mixer for mixing hot & cold water screwed down for 15 mm bore pipe and fixed complete all as specified & directed.

Supply and fix in repair brass CP wash hand basin mixer for making hot and cold water screwed down for pipe and fixed complete all as specified & directed.

S & F in repair grating doom 125mm dia with waste hole of PTMT complete all as specified & directed.

M & L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doorrs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified & directed.

Supply and fixed Aluminum barrel tower bolt of powder coated of extruded section and fixed complete of Size 150 mm long complete all as specified.

Supply and fixed Aluminium handle powder coated cast type anodized of size 150mm complete all as specified & directed.

supply in fixed in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.

Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint, over a one coat of primer complete all as specified & directed.

M & L for 35 mm thick of 2nd class hard wood glazed and skeleton shutter , open rebated and preparation to receive glass gauze etc,( without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitre beads for securing glass etc, size of members of shutter as but Glazed & skeleton shutters (bottom portion) & partly skelton shutter (top portion) suitable for fly proofing complete all as specified & directed.

S&F for floor door stopper of 140mm long cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and directed.

Preparation of old decorated plastere of wall by brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorescent salts, trading oil, greasy spots etc. and applying one coat of oil bound emulsion over one coat of wall putty on wall complete all as specified & directed.

M & L for preparing newly plastered or previously untreated ceiling surfaces and applying two coat of oil bound distemper over a coat of 1 mm thick birla wall care putty complete all as specified and directed.

S & F 32 mm dia low density polythylene pipes (LDPE) of pressure rationg 6 kgf/cm2 suitable for waste pipe etc fixed complete to wall ceiling or floor etc complete all as specified and directed.

M &L Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter with side hung shutters including 3 mm thick Glass panes, Stainless steel wiremesh 0.36 mm nominal dia of wire and average width of aperture 1.40 mm, MS handles and MS peg stay dovetailed or welded incl 02 Nos, MS Tower bolts 150 mm long for each leaf and 8 mm square bar grill / guard bars at spacing as shown on Drg welded to MS flat iron frame work ,including other fittings ,hinges ,MS handles ,tarred hold fasts ,PCC blocks for hold fasts etc all as shown on Drg No CEPZ/CE-TD /31 & 32/2013 sheet 1 & 2, including one coat of red oxide zinc primer, complete all as specified and directed .

S&F, 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane , fixed in repair, complete all as specified and directed.

Demolition of cement concrete (Re-inforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for Rendering 10 mm thick in cement mortar 1: 3 on concrete surfaces as in ceilings finished even and smooth without using extra cement, complete all as specified and directed. .

M & L for Rendering 15 mm thick on fair face of brick work or concrete surface in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of newly plastered surface of wall and applying two coat of oil bound distemper, chalk whiting on plastered surfaces or tinted shade , complete all as specified and directed.

M & L for preparation of new or previously untreated wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing and connection, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 20 mm nominal bore of pipe in walls, and ceiling or laid in floors, jointing and testing galvanised mild steel water tubing “medium grade” with and including all fitting (such as bends, elbows, tees, short pieces connectors, back nuts, diminishing pieces, capas, plugs and union etc) complete all as specified and directed.

S&F Stop/Angle valves, cast copper alloy, 15mm bore (concealed type), screwed down, high pressure with capstan head, both ends screwed for iron pipe or for union etc., fixed in repairs, complete all as specifed & directed.

Dismantling of water tanks exc 500 ltr but n.exc 2000 ltr capacity in any description complete all as specifed & directed.

S& F rotational moulded polyethylene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 2000 litre capacity and the weight of tank not less than 15 kg in each tank complete all as specified and directed.

S& F rotational moulded polyethylene water storage tanks. (cylindrical vertical with closed top ) hoisted and fixed in position, including over flow and drain out pipe complete of 1000 litre capacity ,and the weight of tank not less than 12 kg in each tank all as specified in SSR Part-I complete all as specifed & directed.

S& F in repair for Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed to 20mm bore dia of pipe (Minimum weight 142gms) in repairs complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth; for trench of cable/foundation of pole and stay etc and getting out in Soft/loose soil complete all as specified and as directed.

Material and labour for PCC 1:3:6 Type C-2 (Using 40 mm grade aggregate as in repair to plinth protection,road etc and filling and mass concrete) including providing necessary form work complete all as specified and as directed

M&L under ground XLPE insulated, screened, PVC bedded galvanized steel strip or wire armored, electric power cable (heavy duty) with aluminium conductor, 1100 volts (earthed) grade cross sectional area 70 sqmm, 3.5 core laid in trenches/ pipes/ ducts/ wall/ boarings with necessary cable lugs and glands, nuts, bolts and washers etc and testing including disconnecting and taking out of existing LT cable of any type and size complete all as specified and directed. Note:- Excavation and earth, sand coushioning and protection for cable work shall be measured and paid separately.

Material and labour for sand cushioning for protection of underground cable consolidated and compacted with clean dry sand all as specified and as directed (Compacted thickness shall only be measured and paid)

Material and labour for well burnt bricks,Sub class 'B' bricks, best quality locally available laid flat, dry in trenches for cable protection complete all as specified and as directed

Laying only old brick dry in trenches for cable protection retrieved from site complete all as specified and as directed

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in Soft/loose soil complete all as specified and as directed

Removing excavated material to a distance n.exc 50 mtr and depositing where directed at level n.exc 1.5 mtr above the starting point all as specified and as directed.

M&L for GI pipe 40 mm dia "light grade" ISI marked, laid in trenches/ on floors/on, pole/road for cable protection including necessary joints / fittings including taking up / down and removing old unserviceable GI pipe complete all as specified and directed .

E/M Portion

Taking out carefully copper/aluminium point wiring,Light,fan,socket or power complete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/floors complete all as specified and as directed

Taking down distribution boards/wooden board ,switch fuse units,steel enclosures for MCB of any type and removing from site complete all as specified and as directed

Taking down ceilling fan/exhaust fans and deposite to MES store yard from site complete all as specified and as directed

Taking down existing unserviceable submain wiring any size and making good the disturbed surface all as specified and as directed.

Material and labour for point wiring for one light controlled by one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and including rigid non metallic PVC concealed conduit (medium grade) of suitable dia along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type for mounting of modular switches, sockets, fan regulators alongwith modular plate etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface all as specified and as directed.

All as per item No 81 above but for one fan point controlled by one piano switch all as specified and as directed.

All as per item No 81 above but One light point controlled by two way switch

All as per item no 81 above but for one bell point controled by one bell push all as specified and as directed.

All as per ser item No 80 hereinbefore but for one 3 pin socket outlet 5 Amp Same board.

All as per ser item No 81 hereinbefore but for one 3 pin socket outlet 5 Amp independent.

All as per Item no 81 here-in-before but for one15 Amp 3pin switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire all as specified and as directed.

Supply and fix modular type switch, one way 6 Amps , 1 module complete all as specified and directed.

Supply and fix modular type switch, Two way 6 Amps , 1 module complete all as specified and directed.

Supply and fix modular type switch, one way 16 Amps, 1 module complete all as specified and directed.

Supply and fix modular type socket 5 pin, 6 Amps 2 module complete all as specified and directed.

Supply and fix modular type socket 5 pin, 6 A/16 Amps 2 module complete all as specified and directed.

Supply and fixing of Ceiling rose surface bakelite three terminals 240 volts complete, complete all as specified and directed.

Supply and fixing Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings , complete all as specified and directed.

S&F LED Bulb cool white 10 Watt Elegant design direct fit for easy installation complete all as specified and directed.

Supply and fixing Bell push flush type piano 5 Amp complete, complete all as specified and directed.

Supply and fixing Bell multi music 230 volt ,AC single pole complete all as specified and directed.

Supply and fixing of Tube light fitting integrated type suitable for LED 20W indoor decorative aluminium extruded LED batten complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and directed.

Supply and fixing of Tube light fitting integrated type suitable for LED 10W indoor decorative aluminium extruded T5 LED batten complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and directed.

Supply and fix in repairs factory made epoxy powder coated Distribution board VTPN 6 ways ,415 Volts with metal door (IP-54 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one MCCB as incommer and SP MCBs outgoing complete all as specified and confirming to IS : 8623.

Supply and fixing factory made epoxy powder coated Distribution board SPN 12 ways (SPN MCB DB) with metal door (IP-54 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing complete all as specified and confirming to IS : 8623.

Supply and fixing MCB SP-06 to 32 Amp,10KA, 240 volts complete all as specified and directed.

Supply and fixing of MCB SPN 32 Amp, 240 volts 50Hz AC supply, complete all as specified and directed.

S&F in repair MCCB 415 Volt16 KA 4 Pole 125 Amps complete all as specified and directed.

S&F single core PVC insulated unsheathed multistanded copper conductor cable 1 Sqmm , 1100 Volts ISI marked drawn through existing conduite complete all as specified and directed.

Material and labour for sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 6 sqmm and one single core PVC insulated (unsheathed) solid copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including concealed PVC conduit medium grade 25mm dia ISI marked complete with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement moter 1:3 and making good disturbed surface complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to GI earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dia and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) and pouring extra Clay Soil of qty not less than one cubic meter into the earth pit and also removal of excavated soil not less than 50 mtr from the earthing place all as specified and directed and tested on completion. including testingall complete all as specified and directed.

Supply and fixing LED Bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with suitable size and length of 1.5 sqmm copper conductor with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) alonf with Anti Suicide Fan Rod of suitable size and length with the provn, If the load on fans exceeded 22 kgs, than the smart rod/pipe opens from its centre and spring in the pipe expands, The fan Rod should be tested at Govt of India's MSME Labs for its functionility complete all as specified and directed.

M&L for cutting of suitable size of holes for 300 mm exhaust fan in wall and grouting of nuts and bolts in wall and making good to match with existing walls complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers connecting electrically using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site and as directed.complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm , connecting electrically using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site and as directed.complete all as specified and directed.

Taking down electric energy meter single phase any size or type form the existing site and refixing the same at same place after carrying out necessary repair work in building and making the surface good to match with existing surface complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, PVC connection pipes two Nos etccomplete all as specified and directed.

Supply and fixing 3 pin 15/16 Amp plug top suitable for 240V 50Hz AC supply.complete all as specified and directed.

Preparation of newly plastered surface of ceiling and applying two coat of oil bound distemper, white or tinted shade, complete all as specified and directed.

M/S SUDAGAR MAL (BID ID -3440927)

Pyramid constructions (BID ID -3436435)

M/s Anand Prakash (BID ID -3436364)

JK BUILDERS AND DEVELOPERS (BID ID -3432482)

M/S Sukhmani Construction Co. (BID ID -3435021)

GENESIS INDIA (BID ID -3441253)

M/S VED PAUL MAHAJAN (BID ID -3437382)