Repairs to sanitary fittings plastering sunken floor internal water supply and misc works at HQ SAW Demo Coy Demo Sqn HQ Sqn and CHQ area under AGE B/R-I GE (N) Ahmednagar

Amount

Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortor etc complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15 cm thick etc complete all as specified and directed by Engineer-in-Charge

Material and labour for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base etc complete all as specified and directed by Engineer-in-Charge

Material and labour for rough dressed shahabad stone, 25 mm to 40 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), laid and jointed pointed in cement and sand mortar (1:3) etc complete all as specified and directed by Engineer-in-Charge

Material and labour for non skid ceramic coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed by Engineer-in-Charge

Material and labour for glazed ceramic coloured tiles of size 350 X 250 mm X 7 mm/450x350x7mm thick on vertical surfaces as in dados laid over and including a backing coat of 10 mm thick in cement and sand mortar (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for light shade vitrified ceramic tiles, 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.38 sqm, in floors etc. laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

All as per item No 7 (here-in-before) but on skirting over and including 10 mm thick backing cement and sand mortar (1:4)

M&L for machine cut kota stone slab florring 20-25 mm thick over cement screed base laid over and including 15 mm thick screed bed in cement mortar 1:6, setand jointed with grey cement slurry mixed with pigment to match shade of the slab including rubbing and plishing etc complete all as specified and directed by Engineer-in-Charge

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with cement slurry mixed with pigment to match the shade all as directed

Material and labour in repairs for granite slab, 16 to 18 mm thick laid over and including 15 mm thick screed in cement mortar 1:6, jointed and pointed with coloured cement to match on kitchen platform and shelves including grinding and polishing the exposed edges etc complete all as specified and directed by Engineer-in-Charge

Material and labour for machine cut cudappah stone slab 20-25 mm thick over cement screed base, laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-chage.

M&L for machined pressed precast concrete interlocking paver block glossy with grey cement and pagment, any shpae and size confirming to IS 15658-2006 of 60mm thickness M-35 grade over a stone dust cushion of 30mm thick etc complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete solid block /brick masonary built in cement mortar etc complete all as specified and directed by Engineer-in-Charge

Material and labour for brick work with fly ash straight or curved on plan exc 6m mean radius built in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge

Material and labour for rendering, 15 mm thick on stone/brick / concrete surfaces in cement and sand mortar (1:6) surfaces finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M&L for 25mm thick cement concrete (1:2:4) type B- 1 (20mm graded stone aggregate) on roof 25mm thick set in cement and sand mortar (1:4), including all mouldings but excluding frame etc complete all as specified and directed by Engineer-in-Charge

Dismantling of plain or corrugated steel sheeting and asbestos cement (corrugated semi corrugated) any gauge, thickness, including ridge etc complete all as specified and directed by Engineer-in-Charge

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,fixed with self tapping screwsaas specified etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 0.50 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs vitreous China wash down water closet pan (pedastal pattern) including plastic water closet seat (black), closed pattern with flat bottom and cover, aluminium hinged device, connecting to 'P' or 'S' trap, flushing and ante syphonage pipe etc complete all as specified and directed by Engineer-in-Charge Petite series Cat part No C0287(S)/88(P) Incl seat Cat part No E8309 of Parryware in make mentioned in list of makes in Appendix `C'

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistern etc complete all as specified and directed by Engineer-in-Charge Make :- Cat Part No C0117 of Parryware or Cat Part No 20042 of Hindware or equivalent in make mentioned in list of makes in Appendix `C'

Supply and fix in repairs PVC valveless, syphonic action type, flushing cistern,low level, all accesories etc complete all as specified and directed by Engineer-in-Charge Make :- Sleek essence series of Hindware or Cat part No E8303 of Parryware or equivalent in make mentioned in list of makes in Appendix `C'

Supply and fix in repairs wash hand basin vitreous China, flat back of size 450 X 300 mm including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap all as directed Make:- Cat Part No S2040111 & S2090107 of Cera or equivalent in make mentioned in list of makes in Appendix `C'

M & L for Complete removal of existing treatment on plastered and applying 2 mm thick wall care putty (Birla) including crack filling and applying two coats of Oil bound distemper (OBD) etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old wall surfaces of any description & applying one coat of acrylic (antifungal) exterior grade paint on wall/roof etc complete all as specified and directed by Engineer-in-Charge

M&L for Preparing old painted surfaces of wall and applying one coat of cement based paint etc complete all as specified and directed by Engineer-in-Charge

M&L preparation of newly plastered / unplastered surface and applying three coats of white wash on walls etc complete all as specified and directed by Engineer-in-Charge

M&L preparation of new plastered / unplastered surface and applying three coats of white wash on ceiling etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frames exc 1.5 Sq m but nexc 4.00 sqm with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Taking down shutter exceeding 1.00 sqm but not exc 2 sqm etc complete all as specified and directed by Engineer-in-Charge

Supply and fix pressed steel frames of size 105 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer-in-Charge

Material and labour for filling in door frames in plain cement concrete, (1:2:4) type B0, using 12.5 mm graded stoneaggregates etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 2 nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as directed.

Supply and fix 35 mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial plywood . The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) etc complete all as specified and directed by Engineer-in-Charge

Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, all as directed Make :- Sintex or Equivalent in make mentioned in list of makes in Appendix `C'

Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2 mm prelam PVC Sheet on back face as an Doors and cupboard shutter etc complete all as specified and directed by Engineer-in-Charge Make :- Sintex or equivalent in make mentioned in list of makes in Appendix `C'

Material and labour for second class hard wood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.and removing old beads etc complete all as specified and directed by Engineer-in-Charge

Taking down aluminium doors / windows shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium cleats of existing make and also refixng the locks & roller in existing postiion with and includig new screws including refixing the window shutters in same opening etc complete all as specified and directed by Engineer-in-Charge Note : If broken or unserviceable glass / aluminium wire mesh/floor spring/concealed lock is replaced same will be paid separately under relevant items.

S&F in repars concealed star lock powder coated for aluminium window fixed as per manufacturers instructions etc complete all as specified and directed by Engineer-in-Charge

S & F in repairs double action Hydraulically regulated floor spring made up of minimum 1.25mm thick, aluminium alloy sheet foundation box, main body with stainless steel cover, govering pivot made brass, othr parts made of mild steel heavy duty and fixed etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs aluminium extruded section door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed etc complete all as specified and directed by Engineer-in-Charge

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engineer-in-Charge.

S&F powder coated anodised aluminium fully glazed door shutters side hung type / sliding type with top channel and roller and accessary, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed by Engineer-in-Charge (Note : Glass will measured and paid separately under relevant item of this BOQ

S&F powder coated anodised aluminium glazed window shutter side hung / sliding type, without sash bars, aluminium sections weighing 0.55 kg/m aluminium open track section having reqd size of style and top rails, bottom rails including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 Nos.) suitable handle (1 No) etc complete all as specified and directed by Engineer-in-Charge (Note : Glass will measured and paid separately)

S&F powder coated anodised aluminium glazed / gauzed window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed by Engineer-in-Charge (Note : Glass / wire mess will measured and paid separately under relevant item of this BOQ)

M&L 4.00mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 Sq. m in each pane with solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers etc complete all as specified and directed by Engineer-in-Charge

M&L 4.00mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sq. m in each pane with solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers etc complete all as specified and directed by Engineer-in-Charge

Supply and fix galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified and directed by Engineer-in-Charge

Supply and fix mild steel butt hinges medium weight cold rolled of size 100mm etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy and fixed 300mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium anodised barrel tower bolt of extruded section 200mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium anodised handles of extruded section 150mm long etc complete all as specified and directed by Engineer-in-Charge

Material and labour for two coats of synthetic enamel paint over a coat of pink primer for new / old wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer for new / old steel surfaces of any description exc 10 cm width or girth including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair mild Steel 32 mm dia CP curtain rods with fixing brackets etc complete all as specified and directed by Engineer-in-Charge

Dismantling boarding, any description, fixed to wall or ceiling, any position with nails etc complete all as specified and directed by Engineer-in-Charge

Material and labour for false ceiling with 4 mm thick plain non asbestos building 'E' board with decorative finish water proofed on one side fixed on and including powder coated GI fabricated grid of 60 cm X 60 cm made out of main runner of 'T' section of size 32 mm X 24 mm X 0.30 mm, cross runner made out of 'T' of section of size 24 mm X 24 mm X 0.30 mm and alround angular section of size 22 mm X 22 mm X 0.70 mm with GI clip and level adjuster duly suspended by 4 mm dia GI wire fixed to roof at 1200 mm centre to centre as per manufacturere's instructions and etc complete all as specified and directed by Engineer-in-Charge

Supply & Fix in repair health faucet with 8mm dia, 1.00 mtr flexible tube wall mountained / hooked complete all as per directed Make :- Cat Part No 563 or equivalent in make mentioned in list of makes in Appendix `C'

Supply and fixed in repairs 32 mm dia PVC waste pipe(outlet pipe) plain fixed to waste coupling of WHB or Sink etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs 75mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with stack clamps FI 50mm by 5mm flat iron clamps to walls including bolt & nuts etc complete all as specified and directed by Engineer-in-Charge

All as per item No 63 (here-in-before) but 110 mm dia

Supply and fix in repairs PVC (SWR) bends any radius, for 75mm bore of pipe with access door etc complete all as specified and directed by Engineer-in-Charge

All as per item No 65 (here-in-before) but 110 mm dia

S&F 110 mm bore PVC (SWR) branch piece double (single/double Y) equal or unequal all as directed.

S&F 75mm bore PVC (SWR) branch piece double (single/double Y) equal or unequal all as directed.

Supply and fixe in repairs stainless steel kitchen sink omatt finish with draning over all size 950 x 510 mm and bowl size 410 X 410 X 230 made out of 1.00 mm thick SS sheet of high quality including a pait of brackets, waste coupling, plug and chain, 32 mm dia PVC flexible waste pipe and nahani trap complete all as specified and directed Make :- Model Olympia satin Finish silent square range of Nirali or equivalnet in make mentioned in list of makes in Appendix `C'

Taking down 15 mm dia steel GI tubing including all connected fittings of any dia and in any position including cleaning for re fixing the serviceable pipe etc complete all as specified and directed by Engineer-in-Charge

All as per item No 70 (here-in-before) but 20mm dia pipe.

S&F 15 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling etc complete all as specified and directed by Engineer-in-Charge

All as per item No 72 (here-in-before) but 20mm dia pipe.

S&F in repair wall mixture, 3-in-1 with provn for both telephonic shower /over head shower etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs bib tap, 15 mm dia, cast copper alloy chromium plated fancy type with capstan head screwed down for iron pipe or for brass ferrule all as directed Make :- Cat part No MOR 1020A(Orintal series) of Marc of equivalent in makes mentioned in list of makes in Appendix `C'

Supply and fix in repairs, stop valve, 15 mm dia, cast copper alloy, chromium plated, screwed down high pressure with capstain head screwed both ends for iron pipe or for unions all as directed Make :- Cat part No MOR 1320(Orintal series) of Marc of equivalent in makes mentioned in list of makes in Appendix `C'

Supply and fix in repair 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as directed Make :- Cat part No MOR 1010A(Orintal series) of Marc of equivalent in makes mentioned in list of makes in Appendix `C'

Supply & fix in repairs brass cromium plated shower rose 125mm size Make:- (Cat part No MARC MSR 1050 (shower) and MARC or equivalent in makes mentioned in list of makes in Appendix `C'

S&F in 10 mm thick semi circular thughned glass for shelves/door in cornerwith chamferred edges incl connectedbrackets etc complete all as specified and directed by Engineer-in-Charge. exc 0.35 m in radius

S&F in repairs decorative towel ring chromium plated 150 mm dia fixed with (CP) brass screws of approved qualityas etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs tubular towel rail CP 20mm dia D type 60cm long both flanges brass chronum plated etc complete all as specified and directed by Engineer-in-Charge

M&L for PVC mirror cabinet of size 16" X 16" with napkin rail in ivory colour etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs looking mirror of size 600 - 700mm X 450 - 500 mm all as directed Make :- Cat part No C8606 of Parryware or equivalent in makes mentioned in list of makes in Appendix `C'

Hacking out old broken glass (any thickness size,quality or description) from wooden/steel frames or stone, concrete or brick surrounds glazed with putty or fixed with beads etc complete all as specified and directed by Engineer-in-Charge

Material and labour for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge

S&F in repair Brass Chromium Plated toilet paper holder fixed with (CP) brass screws of approved quality etc complete all as specified and directed by Engineer-in-Charge

Dismantling of water tanks from any position/location, of any make etc,of capacity exc 500 Ltr & n.exc 1000Ltr with ball valve, etc complete all as specified and directed by

Supply and fix rotational moulded polyethylene water storage tanks double layer ISI marked conforming to IS 12701-1996 (cylindrical vertical with closed top) and made out of virgin FDA approved polyethylene material of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting complete all as specified and directed.

All as per item No 88 (here) but 1000 ltrs etc.

S & F 16 to 18 mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm area and not exceeding 0.5 sqm fixed with cement slurry and back coating of 10 mm thick and including polishing, rubbing & including silicon treatment complete all as specified

Material and labour for special treatment to sunken slab floor incl WC trap etc including cleaning and preparing the surface area for carrying out membrane water proofing treatment, then injection grouting the weak areas on the concrete surface with cementitious grout and applying 10mm thick cement plaster in CM 1:4. Then providing and laying Mineral Top APP (Atactic Polypropylene Polymer) modified prefabricated 5 layer 4mm thick water proofing membrane, black finished rainforce with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Litre per Sqm by the same membrane manufacturer of density at 25ºC, 0.87-0.89 Kg per litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torach and sealing all joints etc and preparing the surface complete. and providing PCC 1:5:10 type E2 using 40mm graded mechanically crushed stone aggregates in sunken slab and 75mm thick PCC 1:4:8 type D2 using 40mm graded mechanically crushed stone aggregates as base, 40mm bore GI pipe, light grade of length not less that 50 cm as spout, area of WC exc 1.50 Sqm but nexc 5.00 sqm etc after dismantling the existing sunken floor etc complete all as specified and directed by Engineer-in-Charge

M&L for filleting in any position and any shape in cement and sand mortar (1:4) including mitered stop etc sectional area of fillets not exc 10 sqcm as in for dado/ skirting top etc complete all as specified and directed by Engineer-in-Charge

Material and labour for providing water proofing treatment on roofs as per latest zonal specification , as per manufecturer's instructions and as specified after taking down/out as existing at site :- (a) Cleaning the newly plastered surfaces with wire brushes and applying a coat of bituminous primer @ 0.25 ltrs/sqmts and allow to dry. (b) Applying and laying torch APP polymer modified bituminous membrance 3 mm thick with non woven polyster matt as reinforced weighing not less than 3 kg/sqmts with white gravel/mineral finished by thermofusion process.

M & L for Plastering 10 mm in cement and sand mortar (1:3) using 100% course sand on roof mixed with & including M & L for WPC @ 3% by weight of cement and finished the surfaces even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

S&F for rolled mild steel in trusses (framed), trussed, purlins, (beam, tee, angle) channel or flat sections including distance pieces, cleats etc, with Fe 410-W (Gde E-250) quality -B complete all as specified and dircted.

Material and labour for Digitally printed paver tiles 300mm x 300mm having thickness of 10 mm thick as approved by GE of with grey cement and pigment, machine pressed, factory made, set, jointed and pointed in neat cement slurry in floors over and including screed bed 15mm thick in cement mortar 1:4 finished even and fair etc complete all as specified and directed by Engineer-in-Charge

Dismantling pressed burnt clay tiles Plain/designer of any size in roofing.etc complete all as specified and directed by Engineer-in-Charge

Material and labour for Hydraulically pressed burnt clay tiles Plain/Designer of size 200x120x10 mm machine made laid over & including cement mortar screed 15mm thick in CM 1:6 mixed with water proofing compound and jointrd, pointed in CM 1:3 mixed with 5% crude oil by weight of cement as per manufacturere's instructions etc complete all as specified and directed by Engineer-in-Charge

An amount of Rs 37,176.00 shall be deducted from BOQ on account of schedule of credit

Neha Enterprises

MS. G.A. CONSTRUCTION

Priyadeep Construction

Ms. M.D. Auty

M/S-B.R.SONAWANE

OM SAI ASSOCIATES

M/s AG PATHAN

MUDRIK ENTERPRISES

M/s Meher Construction

M/S. M. F. Sharif & Co.

M/s. Sagar Traders