Improvment and Upgrad. of Markets, Streets, Roads of Shehr-i-Khaas on Right Bank of Jhelum viz. Aali Kadal, Rajouri Kadal, Maharaj Gunj, Zaina Kadal incl. allied works of UG of utilities ,Footpath ,Drainage,Electrical work and illumination etc.Part-B

Amount

Civil Works

Demolishing cement concrete manually/by mechanical means including Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:4:8 or leaner mix (i/c equivalent design mix) including all carriages

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, leadupto50meterand lift upto 1.5m, as directed by Engineer-in-Charge.including all carriages All kinds of soil :

Taking out existing kerb stones of all types from footpath/ central verge,including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 meter lead as per direction of Engineer-in-Charge.including all carriages

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 meter lead as per direction of Engineer-in-Charge.including all carriages

Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar including all carriages

Disposal of earth , soil , Lime, moorum, building rubbish upto 10 km Lead

"Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed including all carraiges .

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge including all carriages

Flooring with Cobble stone of approx. Size 125x125x75 mm (thick) laid on 25 mm average thick cement mortar 1:3 ( 1 cement : 3 Coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the stone, laid in approved pattern complete in all respect as per direction of Engineer-in-charge including all carriages

Providing and laying in position specified grade of cement concrete excluding the cost of centering and , shuttering , All work up to plinth level 1:2:4 (1cement: 2 coarse sand : 4 graded stone aggregate (20mm nominal size) including all carriages

Centering and shuttering including strutting, propping etc. and removal of form work for Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.including all carriages

Cement concrete pavement with 1:2:4 (1cement: 2 coarse sand: 4 graded crushed stone aggregate 20 mm nominal size) including finishing and curing complete.including all carriages

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement including all carriages - cement concrete Mix 1:1.5:3 (M20)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level including all carriages

Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC,carriage of mixed material by tippers to work site, for all leads & lifts,spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 including all carriages

Pre-casting & Placing in position 125 mm dia Bollards 600 mm high of required shape in Cement Concrete M-15 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. pipe 40mm dia and 450mm long with 150x150x6 mm M.S. plate welded at bottom and embeded 150 mm in cement concrete 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing.including all carriages

Providing and laying in position specified grade of cement concrete excluding the cost of centering and , shuttering , All work up to plinth level 1:1.5:3 (1cement: 1.5 coarse sand : 3 graded stone aggregate (20mm nominal size)including all carriages

Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing.One face dressed including all carriages

Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment)including all carriages

Providing and Displaying small tress Different type and colour well developed, fresh & healthy with good foliage,well defined trunk, multi branch 3 to 5 yrs old with roots filled with soil in removable polypack as per direction of the officer-in-charge. Hiegth should be min 1.5mts including all carriages

a) Laural

b) Loquat

c) Cherry

d) Cupressus

e) Italian Cyprus

f) Golden Cyprus

Providing and Displaying shurbs Different type and colour well developed, fresh & healthy with good foliage, multi branch with roots filled with soil in removable polypack as per direction of the officer-in-charge. Hiegth should be min.5mts to 1.5 mts including all carriages

a) Buxus

b) Microphylla

c) Camellia

d) Golden Euenymius

e) Euonymius frutin golden

f) Euonymius frutin silver

Providing and laying design mix cement concrete of M-30 grade, in roads/taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, leveling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints ( 10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in- charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to ,be paid separately) Note:-Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately. Cement concrete prepared with batch mixing machine.including all carriages

Construction of dry lean cement concrete sub base over a prepared subgrade with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per specifications, cement content not to be less than 150 Kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing and curing etc. complete as per direction of Engineer-in-charge.including all carriages

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge including all carriages

Providing, laying and making kerb channel 30cm wide and 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth etc. complete as per direction of Engineer-incharge including all carriages

Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material within all lifts and lead upto 1 km (by mechanical means).

Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. On bitumen surface @ 0.50 Kg/sqm including all carriages

Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete including all carriages

Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge. 50 to 100 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. including all carriages

Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 25 mm compacted thickness with bitumen of grade VG- 30 @5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. including all carriages

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed including all carriages

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.For thickness of tiles 10 mm to 25 mm including all carriages

Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material upto a lead of 1 kilometer, as per direction of Engineer-in-charge.including all carriages

Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads & lifts including all carriages

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.including all carriages

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)including all carriages

Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality.Circular shape 560mm internal diameter including all carriages

Providing and fixing in position pre-moulded joint filler in expansion joints including all carriages

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil :including all carriages

Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material : All kinds of soil :including all carriages

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. complete including all carriages

a) 250 mm dia. R.C.C. pipe

b) 300 mm dia. R.C.C. pipe

c) 450 mm dia. R.C.C. pipe

Providing and constructing RCC manhole mix design M25 Size 1.20 M X1.20M with a depth of 900 mm to 1200 mm, excluding excavation including foundation concrete 250 mm thick and haunches and channels in C.C. 1:2:4 proportion, finishing channels in smooth rendering, providing & fixing of C.I. dapuri type steps each weighing 5.5 kg., 1:2:4 coping , providng & fixing in position steel fibre reinforced concrete ( SFRC) Frame and cover (20 tonnes capacity) of approved make including reinforcement, form work,loading, unloading, transportation, all taxes, etc complete job as directed by Engineering-incharge.

Providing and constructing RCC manhole mix design M25 Size 1.20 M X1.20M Upto a depth of 2.0M , excluding excavation including foundation concrete 250 mm thick and haunches and channels in C.C. 1:2:4 proportion, finishing channels in smooth rendering, providing & fixing of C.I. dapuri type steps each weighing 5.5 kg., 1:2:4 coping , providng & fixing in position steel fibre reinforced concrete ( SFRC) Frame and cover (20 tonnes capacity) of approved make including reinforcement, form work,loading, unloading, transportation, all taxes, etc complete job as directed by Engineering-incharge.

Providing and constructing RCC manhole mix design M25 Size 1.20 M X1.20M Upto a depth of 3.0M , excluding excavation including foundation concrete 250 mm thick and haunches and channels in C.C. 1:2:4 proportion, finishing channels in smooth rendering, providing & fixing of C.I. dapuri type steps each weighing 5.5 kg., 1:2:4 coping , providng & fixing in position steel fibre reinforced concrete ( SFRC) Frame and cover (20 tonnes capacity) of approved make including reinforcement, form work,loading, unloading, transportation, all taxes, etc complete job as directed by Engineering-incharge.

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete For pipes 250 mm to 300mm diameter including all carriages

Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design Inside dimensions 455x610 mm and 45 cm deep for single pipe line-including all carriages

uPVC pipes (working pressure 4 kg / cm2 ) Single socketed pipe metre 110 mm dia

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth,consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.including all carriages

Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956- 01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with thef resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). including all carriages

Providing and fixing Glow studs of size 100x20mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite) or HIP (High impact Polystyrene) or ABS having electronically welded micro-prismatic lens with abrasion resistant coating as approved by Engineer-in-charge. The Glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro-reflective surface shall be 35 +/- 5 degrees to base. The reflective panels on both sides with at least 12cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS : 873 part 4 : 1973. The studs shall be fixed to the road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge.including all carriages

Supplying and installation Yellow and Black Rubber Rumble Strip, on Road.including all carriages

Providing Route marker of Brass ,Including Providing, Placing and fixing with suitable mean on Site including all carriages

Lowering, Laying and Jointing H. D. P. E./M.D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part IIincluding all carriages

Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality. Rectangular shape 600x450 internal dimensionincluding all carriages

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 Sqm on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :including all carriages

Mirror polishing on marble work/granite/stone work where ever required to give high gloss finish complete including all carriages

Providing and fixing of polished granite stone of approved shade and size with letters/numbers, as approved by the Employer, engraved on it and painted with paint of approved shade and make including fixing with Cement Mortar 1:3 (1 Cement : 3 Fine Sand) on already plastered surface including all carriages, complete job to the satisfaction of the Engineer-in-charge.

Providing and laying in position specified grade of cement concrete excluding the cost of centering and , shuttering , All work up to plinth level 1:1.5:3 (1cement: 1.5 coarse sand : 3 graded stone aggregate (20mm nominal size)including all carriages

Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, Riveted and bolted including all carriages

Providing and fixing Bolts including nuts and washer Complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete including all carriages

a) Hot finished seamless type tubes 150mm Dia Sch -160s

b) Hot finished seamless type tubes 100mm Dia Sch-160s

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.including all carriages

Providing,supplying and Instalation of Seating benches manfactured of MS Angles, tees , recatangular tubes /Hollow section , Flat welded including steel Primer , Paniting two or more coats and cement concrete(1:2:4) 0.3×0.3×0.3 blocks in foundation at waiting area including carriage as directed by engineer

Rough dressing of the trenched ground including breaking clods.

(B) Electrical works

(B1) HT Underground Network

Supply, Laying, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of 11 kV, Single core of following sizes Aluminium round wire Armoured XLPE Cable , FRLS (With One spare cables) including laying of 4'' HDPE ( two runs for communication) in provided cable duct bank in proper dressing ( with clamps ) of the cable in an approved maner,complete as required & as per KPDD Specification

a) 1 CORE X 400Sqmm

b) 1 CORE X 185Sqmm

c) 1 CORE X 240Sqmm

d) 1 CORE X 120Sqmm

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Straight Through Joints : Heat Shrinkable type single core H.T. Cable straight Through Joints along with boots ( SILCAB - T) to accommodate cables of following sizes including making joints etc.in an approved manner complete as required & as per KPDD Specification

a) Straight through joints for 1core x 400sqmm

b) Straight through joints for 1core x 185sqmm

c) Straight through joints for 1core x 240sqmm

d) Straight through joints for 1core x 120sqmm

Supply, Laying, Testing & Commissioning of Cable Termination Kits (indoor/outdoor) : Heat Shrinkable type ( Indoor/Outdoor) termination along with necessary accessories to accommodate cables of following sizes with all kit contents including earth continuity along with 3 Nos. crimping type aluminium lugs of suitable capacity including making joints etc. in an approved manner complete as required & as per KPDD Specification

a) Cable Termination Kits (indoor/outdoor) for 1 core x 400sqmm

b) Cable Termination Kits (indoor/outdoor) for 1 core x 185sqmm

c) Cable Termination Kits (indoor/outdoor) for 1 core x 240sqmm

d) Cable Termination Kits (indoor/outdoor) for 1 core x 120sqmm

Supply, Erection, Testing & Commissioning of 9.0 Mtr long Steel Tubular Poles, 410 SP 33

Supply, Installation, Testing & Commissioning of 11kV GO AB Switch with all its accessories

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Route marker along the cable/cable duct bank in complete manner as per required & as per KPDD Specification

Supply, Laying, Testing & Commissioning of warning Tap in complete manner as per required & as per KPDD Specification.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. Pipe Earthing : Earthing With G.I. Strip(25 x 3)mm,G.I.earth pipe 4.5 meter long,40mm dia including accessories & providing masonry enclosure with cover plate having locking arrangment & watering pipe etc.with charcoal & salt as required Complete as per KPDD Specification

(B2) LT Underground Network

Supply,Laying, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of 3 1/2 Core Cable of following sizes,1.1kV Grade, Armoured, XLPE Insulated Stranded Conductor FRLS type( With 3-ɸ, 1N, with 1 spare) working voltage upto 11000 volt to be laid in cable duct complete in manner with necessary connection in an approved manner complete as reauried & as per KPDD Specification.

a) 3 1/2 core x 630sqmm

b) 3 1/2 core x 400sqmm

c) 3 1/2 core x 300sqmm

d) 3 1/2 core x 240sqmm

e) 3 1/2 core x 185sqmm

f) 3 1/2 core x 120sqmm

Supply, Laying, Testing & Commissioning of 185sqmm, 3.5Core LT Aerial Bunched Cable along with allied accessories viz. Susension/Tension Clamps, I-Hooks, Piercing Connectors, Straight through cable jointing kits, etc (Cable has to be laid overhead).

Supply, Laying, Testing & Commissioning of 120 sqmm, 1.1kV Grade, Aluminium Conductor,Twin-Core, Armoured, PVC insulated LT Cable, etc (Cable has to be laid overhead).

Supply, Installation, Testing and Commissioning of dust/rain/snow-proof canopy type mini outdoor LT Distribution box with front door opening duly powdered color coated with inbuilt MCCBs for incomer & SFUs for outgoing circuits, installed on cement concrete block with 4 angle iron legs grouted in the cement concrete for termination of LT Cables of Compact Sub-Stations of required size

Supply, Installation, Testing and Commissioning of LT DB with all allied accessories including buses of suitable dimensions for termination of services.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of 8 Mtr. Long Pole( ST-540 SP15) IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level aluminuim painted with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300mm above the planting depth which should be 1.5ms (SP 15). Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Straight Through Joints for cables. Heat Shrinkable type Straight Through Joints along with necessary accessories to accommodate cables of following sizes with all kit contents including earth continuity of suitable capacity including making joints etc. in an approved manner complete as required

a) 3 1/2 core x 630sqmm

b) 3 1/2 core x 400sqmm

c) 3 1/2 core x 300sqmm

d) 3 1/2 core x 240sqmm

e) 3 1/2 core x 185sqmm

f) 3 1/2 core x 185sqmm AB

g) 3 1/2 core x 120sqmm

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Cable Termination Kits (indoor/outdoor). Heat Shrinkable type ( Indoor/Outdoor) termination along with necessary accessories to accommodate for 3 1/2 core cables of following sizes with all kit contents including earth continuity along with 3 Nos. crimping type aluminium lugs of suitable capacity including making joints etc. in an approved manner complete as required

a) 3 1/2 core x 630sqmm

b) 3 1/2 core x 400sqmm

c) 3 1/2 core x 300sqmm

d) 3 1/2 core x 240sqmm

e) 3 1/2 core x 185sqmm

f) 3 1/2 core x 120sqmm

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Route marker along the cable/cable duct bank in complete manner as per required

Supply, Laying, Testing & Commissioning of warning Tap in complete manner as required

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Earthing Complete. Earthing With G.I. Strip(25 x 3)mm,G.I.earth pipe 4.5 meter long,40mm dia including accessories & providing masonry enclosure with cover plate having locking arrangment & watering pipe etc.with charcoal & salt as required.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Cement bottoming 1:2:4 mix as per REC standards .45cum/pole

(B3) Dismantling

Dismantling of existing ACSR 100/50/30 Sqmm LT and transportation back to Divisional Stores. As per Instructions of Electrical Incharge.

Dismantling of existing PCC/Wooden Pole and transportation back to Divisional Stores. As per instruction of Electrical Incharge.

Dismantling of existing ST pole and transportation back to Divisional Stores. As per instruction of Electrical Incharge.

Dismantling of existing LT shakle Insulators with D clamps complete and transportation back to Divisional Stores. As per instruction of Electrical Incharge.

Dismantling of existing Stone Masonary Pole Bed/Wooden Bed and transportation back to Divisional Stores. As per instruction of Electrical Incharge.

Dismantling of existing ACSR 100/50 Sqmm HT and transportation back to Divisional Stores. As per Instructions of Electrical Incharge.

Dismantling of existing MS Channel Iron 3-5 Feet with braces long and transportation back to Divisional Stores. As per instruction of Electrical Incharge.

Dismantling of existing 11 kV Pin Insulators complete and transportation back to Divisional Stores. As per instruction of Electrical Incharge.

Dismantling of existing 11 Disk Set and transportation back to Divisional Stores.As per instruction of Electrical Incharge.

Dismantling of existing MS Channel Iron 20 Feet with braceslong and transportation back to Divisional Stores. As per instruction of Electrical Incharge.

Dismantling of existing MS Channel Iron 8-10 Feet with braces long and transportation back to Divisional Stores. As per instruction of Electrical Incharge.

Dismantling of existing ST 8/9 Mtr (Cmposite) Long Pole and transportation back to Divisional Stores. As per instruction of Electrical Incharge.

Dismantling of existing Ch. Iron V-X arm, X-arm including clamps & braces (GI)

(B4) Feeder Pillar

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for 3 phase, 415V, 1no of 250 Amps incoming 3 TP MCCBs (Breaking 50KA) fitted with outgoing 03 No 100 Amps SP MCCBs, 1No.100Amps 3 pole MCCB for outgoing LT cables, Distribution feeder Pillar suitable for outdoor installation , made out of CRCA sheet painted through 7-tank process with PU painted Busbars(6 mm thickness) 4P, Aluminium with heat shrinkable sleeves and adequate capacities complete with all accesories 12 way Distribution Feeder Pillar.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for 3 phase, 415V, 1no of 250 Amps incoming 3 TP MCCBs (Breaking 50KA) fitted with outgoing 03 No 100 Amps SP MCCBs, 1No.100Amps 3 pole MCCB for outgoing LT cables, Distribution feeder Pillar suitable for outdoor installation , made out of CRCA sheet painted through 7-tank process with PU painted Busbars(6 mm thickness) 4P, Aluminium with heat shrinkable sleeves and adequate capacities complete with all accesories 4 way Distribution Feeder Pillar.

Supply, Laying, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of 1 phase 2 wire, 415V, 1nos of 100 Amps incoming SP MCCBs fitted with outgoing 08 No 16 Amps SP MCBs for Service Connections, Distribution Service Pillar suitable for outdoor installation , made out of CRCA sheet painted through 7-tank process with PU painted Busbars(4 mm thickness) 2P, Aluminium with heatshrinkable sleeves and adequate capacities complete with allaccesories 8 way Distribution Service Pillar with Kiosk Boxes for Housing Digital Energy Meters)for Distribution of Supply to consumers (8 way)

Supply, Laying, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of 1 phase 2 wire, 415V, 1nos of 100 Amps incoming SP MCCBs fitted with outgoing 04 No 32 Amps SP MCBs for Service Connections, Distribution Service Pillar suitable for outdoor installation , made out of CRCA sheet painted through 7-tank process with PU painted Busbars(4 mm thickness) 2P, Aluminium with heatshrinkable sleeves and adequate capacities complete with allaccesories 4 way Distribution Service Pillar with Kiosk Boxes for Housing Digital Energy Meters)for Distribution of Supply to consumers (4 way)

Supply, Laying, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of following sizes unarmed PVC cable for service mains of Consumer as per direction given by authority in complete manner as required

a) 2core x 25 sqmm

b) 2core x 16 sqmm

c) 2core x 95 sqmm

d) 2core x 10 sqmm

Supply, Laying, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of TPN MCBs in existing feeder pillars/ control panels.

a) 32 amp MCB TPN

b) 40 amp MCB TPN

c) 63 amp MCB TPN

d) 80 amp 4 pole MCB TPN

e) 100 amp 4 pole MCB TPN

Supply, Laying, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of single pole MCB 63 amp in existing feeder pillars/ control panels.

Supply, Laying, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of MCCBs in existing feeder pillars/ control panels.

a) MCCB 100 AMPS 10KA, SP ADJUSTABLE

b) MCCB 100 AMPS 36KA, 3P ADJUSTABLE

c) MCCB 250 AMPS 36KA, 4P ADJUSTABLE

d) MCCB 400 AMPS 36KA, 4P ADJUSTABLE

e) MCCB 630 AMPS 36KA, 4P ADJUSTABLE

Supply, Laying, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of multifunctional digital display meter of volt/amp/Hz in feeder pillars

Supply, Laying, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of aliminuim busbar strips including all allied accessories like lugs, bolts etc

a) 400 amp busbar

b) 600 amp busbar

c) 800 amp busbar

d) 1200 amp busbar

Supply, Laying, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of PVC cable tray/cable trunking on surface,powder coated, weather proof, including drilling

a) 100mmx50mm

b) 50mmx50mm

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Support Galvanised angle frame and legs (50 mm x 50 mm x 6 mm) for Distribution Feeder Pillar , leg height 1m with 0.3m in soil approx 7 m @ 4.50Kg per mtr. as per site condition in complete manner with cutting ,bending,fabrication as required in complete manner

Supply, Laying, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Support Galvanised angle frame and legs (50mm x 50 mm x 6 mm) for Distribution Feeder Pillar with leg height 1m with 0.3m in soil approx [email protected] per mtr

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Earthing Complete Earthing With G.I. Strip(25 x 3 )mm,G.I.earth pipe 2.5 meter long,20mm dia including accessories & providing masonry enclosure with cover plate having locking arrangment & watering pipe etc.with charcoal & salt as required

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Cement grouting for support angle legs 1:2:4 for LT fedder pillar as per approved drawing in complete manner as required

Supply, Laying, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of 2" HDPE Conduits

Supply, Laying, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Excavation in any type of soil including hard laterite soil

Supply, Laying, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Reinstatement of Devri stones 100m*0.7m*0.5m

(B5) HT AB Cable

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of 8 Mtr. Long Pole( ST-540 SP15) IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide and coated above ground level and full aluminuim coated with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300mm above the planting depth which should be 1.5ms (SP 15). Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of 70 mm² AB (HT) Cable (3 x 70 + 95 mm²) XLPE(11 kV, 3C + Earth)

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Heat Shrinkable Outdoor Cable Termination Kit

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of mid span Straight Through Joints for 11 kv AB cables.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Suspension/Tension Clamp with eye hook

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Galvinized Nuts and Bolts

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Danger Plate With Clamps as per Standards wih writing in English & Urdu.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Anti-Climbing Device with Clamps (GI Barbed Wire (12 SWG) for a distnce of 40 CM at hight of 3.5 meters from GL) , 3.50 Kg per pole.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. Pipe Earthing : Earthing With G.I. Strip,G.I.earth pipe 4.5 meter long,40mm dia including accessories & providing masonry enclosure with cover plate having locking arrangment & watering pipe etc.with charcoal & salt as required

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Cement bottoming 1:2:4 mix as per REC standards .45cum/pole

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

(B6) LT AB Cable

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of 8 Mtr. Long Pole( ST-540 SP15) IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level and full aluminuim painted with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300mm above the planting depth which should be 1.5ms (SP 15). Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of 120 mm² AB (LT) Cable ( 3 x 120 + 1 x 16 + 1 x 70 mm²) XLPE (1.1kV, 3+1 C, Al)

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Straight Through Joints

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Suspension/Tension Clamp with eye hook

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Galvinized Nuts and Bolts

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Danger Plate With Clamps as per Standards wih writing in English & Urdu.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Anti-Climbing Device with Clamps (GI Barbed Wire (12 SWG) for a distnce of 40 CM at hight of 3.5 meters from GL) , 3.50 Kg per pole.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. Pipe Earthing : Earthing With G.I. Strip,G.I.earth pipe 4.5 meter long,40mm dia including accessories & providing masonry enclosure with cover plate having locking arrangment & watering pipe etc.with charcoal & salt as required

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Cement bottoming 1:2:4 mix as per REC standards .45cum/pole

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for Insulating Piercing Connectors

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for PG Clamps

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

(B7) DTs and Sub-Station

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Supply of of S.T. poles 9.0 Meter long swaged Type conforming to ST 410 SP-33, IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level and fully aluminuim painted with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300mm above the planting depth which should be 1.5ms (SP 33). Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Supply of of S.T. poles 8.0 Meter long swaged Type conforming to ST 410 SP-15, IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level and fully aluminuim painted with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300mm above the planting depth which should be 1.5ms (SP 33). Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. for 100 Sqmm ACSR conductor

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. for70mmsq AB (HT) cable and one spare cable.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc.heat shrinkable outdoor cable tarmination kit.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. for 120mmsq AB (LT) cable and one spare cable.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. for straight through jointing kits.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for LT Distribution Box for 250kva DTR with MCCB 400 Amps 3P 36KA for incomer and 200 amp MCCB 3P 16kA 1 No and 160 amp MCCB 3P 16Ka two numbers for outgoing circuits.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for LT Distribution Box for 400kva DTR with MCCB 630 Amps 3P 36KA for incomer and 200 amp MCCB 3P 16kA 1 No and 200 amp MCCB 3P 16Ka four numbers for outgoing circuits.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for LT Distribution Box for 630kva DTR with MCCB 1000 Amps 3P 36KA adjustable for incomer and 250 amp MCCB 3P 25kA 2 No and 200 amp MCCB 3P 25Ka 3 numbers for outgoing circuits.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Gapless Surge Arrestor, 9 kV, 10 kA, Lighting Arrestor Set Heavy duty with Plymer Housing, Station type conforming to IEC-99-4 Capable of withstanding Maximum continuous operating voltages (M.C.O.V)

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of 11KV 200 Amperes, Triple pole switches Gang Operated (G.O. Set) conforming: IS-2544, IS: 5340 (Part-III) and SS: 9921 (Part-I -V)

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of 11 KV Horn, Gap (fuse 3-phase 200A) as per Relevant IS.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of 1.1KV Grade PVC Insulated Stranded Conductor UnArmoured Sngle Core XPLE FIRLS Type Cable630mm2 Single Core.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of 1.1KV Grade PVC Insulated Stranded Conductor Un Armoured Sngle Core XPLE FIRLS Type Cable400mm2 Single Core.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of 1.1KV Grade PVC Insulated Stranded Conductor Un Armoured Sngle Core XPLE FIRLS Type Cable300mm2 Single Core.

Supply installation testing and commisioning of 11/0.433kv 3 phase distribution transformer with bimettallic terminal connectors energy level 2 copper wound and LV cable box having detachable aluminuim gland plate.Transformer should have arrangement for vertical take off of cable (400 Kva ) with OCTC on 11 kv side ( min 35% and max 5%).

Dismantling and re erection of following rating distribution transformer including loading,unloading,transportation from one location to different location.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. for suspension/tension clamp with eye hook.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. for insulating piercing connectors

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. for TransformerPad/G.I Channel Bedding(300Kg)

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for wedge connectrs/PG Clamps

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for GI Channel/Angle/Flat of sizes including clamps for L.A set/G.O set/HornGap

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for 11KV Pin insulators with pins

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for 11KV Disc insulators with fittings

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for Earthing of Substation---Excavation of earth pit of dia 650mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as per IS 1239. GI strip for neutral earthing of size 25mm*3mm for connection of transformer body, G.O Set & lightening Arrestor as per IS 2629/85, GI nuts & bolts, refilled with earth enhancement materials & earth chamber made of brick masonry with RCC slab cover.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Galvinized Nuts and Bolts

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Alimunium lugs

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Cement bottoming 1:2:4 mix as per REC standards .45cum/pole

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Cement bottoming 1:2:4 mix as per REC standards .5cum/pole

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Danger Plate With Clamps as per Standards wih writing in English & Urdu.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Anti-Climbing Device with Clamps (GI Barbed Wire (12 SWG) for a distnce of 40 CM at hight of 3.5 meters from GL) , 3.50 Kg per pole.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of 16 KN polymer shackle insulator complete job.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of GI U clamps for shackle insulators

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Providing & Installation/ fixing of S.L. Clamps 630/ 300 sq mm

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Providing & Installation/ fixingof Al. Thimbles 630/400/Sq.mm.

Supply, and installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of GI wire 6 SWG & 8 SWG

(B8) Re-alignment of HT/LT Network

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Supply of of S.T. poles 9.0 Meter long swaged Type conforming to ST 410 SP-33, IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level fully aluminuim coated with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300mm above the planting depth which should be 1.5ms (SP 33). Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of 8 Mtr. Long Pole( ST-540 SP15) IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level fully aluminuim coated with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300mm above the planting depth which should be 1.5ms (SP 15). Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Supply of ACSR 100mmSq conforming with the Indian Standard specification IS: 398 (PLI)-1976 and IS : 398

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Supply of Supply of ACSR 50Sqmm conforming with the Indian Standard specification IS: 398 (PLI)-1976 and IS : 398 (PL II)- 1976 or the latest version thereof.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Parallel Grove (PG) clamps for 0.05 ACSR Conductor, binding wire etc (1 Set=3 Nos.)

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Channel Iron V X-arm 75x40x6mm las Per standards (GI) . And Angle Iron Top Bracket of angle Iron 50x50 * 6mm (GI).

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Ch. Iron X-arm includind clamps & braces (GI).

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of G.I U- clamps for LT Shackle insulators to be fixed without drilling/punching of poles on ST poles with pin.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for LT Shakle Insulator with D- Clamps

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for 11KV Pin insulators with pins

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for11KV Disc Insulators with fittings (45KN) (Set)

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Galvinized Nuts and Bolts

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Danger Plate With Clamps as per Standards wih writing in English & Urdu.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Anti-Climbing Device with Clamps (GI Barbed Wire (12 SWG) for a distnce of 40 CM at hight of 3.5 meters from GL) , 3.50 Kg per pole.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. Pipe Earthing : Earthing With G.I. Strip,G.I.earth pipe 4.5 meter long,40mm dia including accessories & providing masonry enclosure with cover plate having locking arrangment & watering pipe etc.with charcoal & salt as required

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Aluminium Jointing Sleves.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Guard Netting complete with earthing connection on both sides using Cradle guard wire 8 SWG GI wire and lashing of 10 SWG GI wire including GI x-arms as per REC Standards, with clamps and braces, threaded eye bolts, turn buckles and binding wire, nut bolts etc.,

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Extension Risers (GI) Ch. 75*40*6mm , 06 Feet long with V X-arm as per REC specifications

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Cement bottoming 1:2:4 mix as per REC standards .45cum/pole

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Cement bottoming 1:2:4 mix as per REC standards .5cum/pole

(B9) Renovation of Lineman Shed

Providing and fixing in postion cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with - A) all work upto plinth 1:3:6 ( 1 cement: 3 coarse sand:6 graded stone stone aggregate 40 mm nominal size. B) crushed.

Supplying and filling in plinth with fine sand under floors including watering , ramming,consolidating,and dressing complete.

Brick work with common burnt clay ( non modular ) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 ( 1 cement : 6 coarse sand )

Extra for brick work with common burnt clay bricks / cement concrete bricks in superstructure above plinth level upto floor five level

Half brick masonary with common burnt clay ( non modular ) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:4 ( 1 cement:4 sand coarse)

Extra for half brick masonary in superstructure above plinth level upto floor five level

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel angle section of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x5 mm flat pieces to the existing T iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the directions of engineer in charge.

Cement plaster (in fine sand ): 12 mm cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand)

White washing with lime to give an even shade on new work ( three or more coats)

Cement concrete flooring 1:2:4 finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 25mm thick with 12.5 mm nominal size stone aggregate.

Providing and fixing 35mm thick factory made laminated veneer lumber door shutter conforming to IS 14616 and TADS 15:2001 ( part B ), fixing with butt hinges of required size with necessery screws, all complete as per directions of engineer in charge and panelling with panels:12mm thick plain grade 1 , meduim density flat pressed three layer particleboard FPT-I or graded wood particle board FPT-I,IS 3087 marked bonded with BWP type synthetic resin adhesive as per IS 848.

Providing and fixing 30mm thick factory made laminated veneer lumber glazed shutter conforming to IS 14616 and TADS 15:2001 ( part B ),using 4mm thick float glass panes for doors,windows and clerestory windows fixing with ISI marked butt hinges of required size with neccesary screws as per the directions of engineer in charge.

Providing and fixing aluminuim handles ISI marked anodized (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws ets complete 100mm.

Providing and fixing aluminuim sliding door bolts ISI marked anodized (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour and shade with necessary nuts and screws ets complete 300 x 16 mm

Providing and fixing aluminuim tower bolts ISI marked anodized (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour and shade with necessary nuts and screws ets complete 200 x 10 mm

Providing and fixing aluminuim tower bolts ISI marked anodized (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour and shade with necessary nuts and screws ets complete 100 x 10 mm

Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 5 mm thick glass panes.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.

(B10) Illumination

Supplying and erecting street light Wall bracket (fancy wall bracket) made from 40 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete.job is in complete manner.

Supplying and erecting LED street light fitting 150 W, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete

Supplying, erecting & terminating XPLE armoured cable 4 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe

Supplying & erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places.

Supplying and erecting Three phase smart energy meter DLMS compliance with 3x240V 50 cycles AC supply 10-60 A, ISI mark, accuracy class 1.0 with backlit LCD display, measuring & display V, I, kW, kWh, PF, kVA, kVAr, MD, day, week, month & with communication module configurable for GSM/Wi-Fi, IrDA/Bluetooth, complete provided panel with calibration certificate from manufacturer & duly wired with required size of PVC wires.

Supplying & erecting FRP box of size 150 x 125 x 100 mm, 2.7 mm thick complete on pole/wall as per Direction.

Supply, Installation, Testing and commissioning of 9m high octagonal poles with foundation bolts having bottom of 155mm, top 70 mm on provided foundation

Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball

Supplying, erecting & marking SPN MCB 6A to 32A, B- series (for lighting) in provided spaces

Supplying, erecting & terminating XLPE armoured cable 4 core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm.(12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe

Supplying, erecting & terminating XLPE armoured cable 4 core 50 sq. mm. aluminium conductor with continuous 5.48 sq. mm.(12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe

Supplying, erecting & terminating XLPE armoured cable 4 core 70 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe.

Supplying, erecting & terminating XLPE armoured cable 3½ core120 sq. mm. aluminium conductor with continuous 12.97 sq.mm. (8 SWG) G.I. earth wire complete erected with glands & lugs,on wall/ trusses/pole or laid in provided trench/ pipe.

Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia.G.l. Rod complete with all materials

Supplying and erecting GI earth wire of high purity of different sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws in an approved manner.

Supplying and erecting G.I. strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joint required.

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 9m octagonal GI pole).

Supplying & erecting G.I. pipe ‘A’ class 25 mm dia. erected for enclosing PVC armoured cable on wall/pole

Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid cover of 75 kg with lid and frame fixed in cement concrete.

Hassan Road Construction Co Pvt Ltd

N S Associates PVt Ltd