Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST RATE QUOTED | |
| 2 | L2₹34.8 L+₹1.4 L (4.33%)Rejected-AOC | L2 | Rejected-AOC HIGHER RATE QUOTED | |
| 3 | L3₹35.2 L+₹1.9 L (5.71%)Rejected-AOC | L3 | Rejected-AOC HIGHER RATE QUOTED | |
| 4 | L4₹36.5 L+₹3.1 L (9.45%)Rejected-AOC 84 B LOWER BURDWAN COMPOUND RANCHI 834001 JHARKHAND | RANCHI | JHARKHAND | 834001 | L4 | Rejected-AOC HIGHER RATE QUOTED | |
| 5 | L5₹40.0 L+₹6.7 L (20.0%)Rejected-AOC SOUTH CANEL PAR PO PANAGARH BAZAR DISTT PASCHIM BARDWAN WB PIN 713148 | PANAGARH BAZAR | PASCHIM BARDWAN | WEST BENGAL | 713148 | L5 | Rejected-AOC HIGHER RATE QUOTED |
Tender Value
₹45.4 L
EMD Value
₹90,800
Closing Date
29 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2023_MES_592336_1
8400-960/E8
Open Tender
Civil Works
Works
180 days
PANAGARH
Class D and Category a (i) (Building)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹90,800
Yes
23 Jun 2023
29 Apr 2023
30 May 2023
29 Apr 2023
29 May 2023
15 May 2023
Amount
Surface excavation n.exc (n.exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavating in trenches, n.exc 1.5m wide and n.exc 1.5 m depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose complete all as specified and directed.
All as per item No 2.00 mentioned here-in-above but depth exc 1.50m but n.exc 3.0m complete all as specified and directed
M&L for sand filling under floors or in foundations including watering and consolidation and complete all as specified and directed.
M&L for hardcore of broken stone of gauge n.exc. 63mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed
M&L for cement concrete 1:4:8, Type D-2 (using 40 mm graded stone aggregates) in foundations etc complete all as specified and directed .
M&L for cement concrete 1:3:6, Type C-2 (using 20 mm graded stone aggregates) in surface channlels and drains complete all as specified and directed .
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.
M&L for cement concrete 100mm thick 1:4:8, Type D-2 (using 40 mm graded stone aggregates) as in sub base for flooring etc complete all as specified and directed.
M&L for pre-polished machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement & pigment complete all as specified and directed.
M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed.
M&L for removing excavated material (soils) n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point all as specified and directed.
M&L for RCC M-25 Design mix (using 20mm graded stone aggregate) as in foundations, including rafts,footings, foundation beams;plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed
M&L for RCC M-25 Design mix (using 20mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed
M&L for RCC M-25 Design mix (using 20 mm graded stone aggregates) as in slabs supported on walls, roof beams and Chajja , columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for RCC M-25 design mix (using 20 mm graded stone aggregates) as in Beams, cantilevers, bressummers,lintels over 1.5m span complete all as specified and directed.
M&L for Mild steel TMT bars 10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for Mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per item No 18.00 mentioned here-in-above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter complete all as specified and directed
M&L for formwork to sides of pillars,posts, struts, piers, columns and stanchions square, rectangular or circular for rough finished surface complete all as specified and directed .
All as per item No 21.00 mentioned here-in-above but for sides and soffits of beam, lintels and shelves all as specified and directed.
M&L for formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor and roofs n.exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n.exc 20cm wide completed all as specified and directed.
M&L for fly ash brick old size straight or curved on plan.exc 6 mtr mean radius built in CM (1:6), complete all as specified and directed.
M&L for half brickwork with fly ash sub class 'B' bricks straight or curved on plan.exc 6m mean radius, built in CM (1:4) complete all as specified and directed.
M&L for rendering 15 mm thick on brick or concrete surfaces in CM (1:4) and finished even & smooth without using extra cement complete all as specified and directed .
M&L for rendering 15 mm thick on brick or concrete surfaces in CM (1:6) and finished even & smooth without using extra cement complete all as specified and directed .
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M&L for three coats on new wall surface including preparation on wall surfaces complete all as specified and directed.
M&L for complete removal of old/existing treatment incl preparation of wall sufaces of any description and applying two coats of white washing on wall surfaces complete all as specified and directed.
M&L for two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed.
M&L for glazed ceramic coloured tiles in vertical surfaces of size 350x250x7mm/ 450x350x7mm thick quality not less than group II, straight edge, as in skirting, dados, walls etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 10mm thick rendering in cement mortar (1:4), complete all as specified and directed.
M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410-W(Gde- E-250) quality-B complete all as specified and directed.
Dismantling (corrugated, semi corrugated ) sheet in roof covering complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating @ 150 GSM GI based corrugated steel sheet 0.5mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F for Pre-painted galvalume aluminum zinc coating @ 150 GSM GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of sheet complete all as specified and directed.
S&F powder coated anodised aluminium snap grid 605mm x 605mm Anodised aluminium snap grid frame work for false ceiling with all necessary aluminum angle & Tee arrangement with and incl fixing cleats screws etc including dismantling complete all as specified and directed.
S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long complete all as specified and directed.
S&F for 6mm thick 'E' board (non asbestos fibre) designer building boards fixed in aluminum frame work in ceiling flat or sloping with screws complete all as specified and directed.
M&L for machine cut Kota stone slab flooring 20-22 mm thick, laid over & including screed bed of 20 mm thick in cement mortar (1:4) and jointed with grey cement slurry mixed with matching shade pigment including rubbing and polishing (Granite finish) complete, all as specified and directed.
M&L for PCC (1:3:6) Type C1 (using 20 mm graded stone aggregate), 75 mm thick finished even & smooth without using extra cement as in plinth protection including bitumen/mast filling in the joint complete all as specified and directed.
Taking down window chowkhats or frame n.exceeding 1.5 Sqm each with shutter(s) (without taking off shutters from the frame), including removing to store, complete all as specified and directed.
Taking down chowkhats or frame exceeding 1.5 Sqm but n.exceeding 4 Sqm each with shutter(s) (without taking off shutters from the frame), including removing to store, complete all as specified and directed.
M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65X125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardan and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Note: M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made)
S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative panelled decorative flush door shutter one side plain on other side of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
S&F Factory made single extruded WPC (Wood Polymer Composite) 30mm thick Glazed and skelton panelled door shutter one side plain on other side of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified and directed).
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed
S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 150 mm long aluminium anodised handle cast type and fixed complete all as specified and directed.
S&F 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
S&F 300mm aluminium anodised sliding door bolts with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixinf bolt and sliding bolts of extruded section or cast alumnium alloy and fixed all as specified and directed .
S&F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.5 sqm in each pane etc complete all as specified and directed.
S&F framed work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified and directed.
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.
M&L for preparation of new Wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and dirceted.
S&F kitchen sink of stainless steel 1mm thick with plugs, washers and wastes; including bedding in cement mortar & providing cantilever brackets and west pipe, overall size 495mm x 420mm & bowl size 410mm x 330mm x 160mm, complete all as specified and directed. (Make: Prayag/Nirali/Blustar)
S&f vitreous china wash basin, white , flat back , size 550 x400mm (for hospital use) excluding taps, waste, chain and plug and porcelain stopper but including brackets any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.
S&F pillar taps 15 mm bore dia cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwd shank and fly nut screwd for iron pipes, fancy type complete all as specified and directed.
S&F PVC connection 15 mm dia, 450 mm long including check nut complete all as specified and directed.
S&F bib tap 15 mm dia cast copper chromium plated fancy type handle screwd for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F stop valve 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed. Chromium plated fancy type complete all as specified and directed.
S&F towel rail tubular towel rail 20mm dia 60cm long brass chromium plated complete all as specified and directed.
S&F grating square 150mm size of PTMT(minimum 100 gms) complete all as specified and directed.
S&F 75mm PVC (SWR) floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
S&F PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.
S&F PVC (SWR) 75mm bore pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed.
S&F PVC bends plain (any radius) for 75mm bore PVC pipes complete all as specified and directed.
S&F PVC bends plain (any radius) for 110mm bore PVC pipes complete all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends, or edges of landings etc. and cutting chases for concealed water tubing, concealed conduit wiring, etc, and making good, cutting n.exceeding 10 cm girth, in brick walls, complete all as specified and directed.
Taking down cement plaster any description and the like on brick or stone walls, etc including raking out joints,hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for 15mm thick in CM (1:4) rendering on brick or concrete surfaces finished even and smooth with out using extra cement and using with integral water proofing compound on wall (Note: WPC shall be measured and paid seperately)
Supply only intergral water proofing compound (liquid admixture) complete all as specified and directed (Makes : pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
M&L for rendering 10mm thick in CM (1:3) on fair faces of brick work / Concrete surfaces finished even and smooth with out using extrac ement complete all as specified and directed
Cutting and uprooting of vegitation growth on surfaces of Building roof, chajja, along plumbing/water supply lines and pouring of chemicals , making good the distrubed portion with cemetn mortar 1:3/concrete PCC 1:1.5:3 type A1 (using 12.5mm graded stone aggregate) including necessary scaffolding etc complete all as specified and directed
M&L for complete removal of existing treatment with mechanica; scrubber and by hand where the mechane can not reach with sand papers/wire brushes etc and Washing, rubbing down and stopping of old surfaces , applying a thin layer of exterior wall putty to a uniform wall surface and Finishing walls for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as directed by Engr-in -Charge (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).
M&L for preparing new plastered surfaces of ceiling and applying three coats of white wash on walls including preparation complete all as specified and directed
M&L for preparing new plastered surfaces of walls and finishing walls with M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed (Make: Apex Ultima of Asian/Weather coat all gaurd of Berger/Xtra tough of Shalimar)
Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed
S&F 75mm dia PVC (SWR) bends with oval access door any radius complete all as specified and directed
S&F 110mm dia PVC (SWR) bends with oval access door any radius complete all as specified and directed
S&F 75mm dia PVC (SWR) junction single, (Single T) equal or unequa with oval access door complete all as specified and directed
S&F 110mm dia PVC (SWR) junction single, (Single T) equal or unequa with oval access door complete all as specified and directed
S&F 15mm bore Tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed
S&F 20mm bore Tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed
Taking up or down steel 20mm dia tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed
Taking up or down steel 15mm dia tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed
Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc complete all as specified and directed.
M&L for two coats of synthetic enamel paint on old steel surfaces including preparation complete all as specified and directed
M&L for complete removal of existing treatment with mechanica; scrubber and by hand where the mechane can not reach with sand papers/wire brushes etc and Washing, rubbing down and stopping of old surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer and applying wall putty where necessary complete all as specified and directed (Make: M/s Tractor Acrylic Distemper of Asian/Bison Acrylic Distemper of Berger)
Demoltion of concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demoltion complete all as specified and directed
M&L for RCC 1:1.5:3 type A1 (using 20mm graded stone aggregate) as in Chajja/fascia complete all as specified and directed
Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed
M&L for 50mm bore UPVC Pipes (SCH-40) complete all as specified and directed
Writing letters or figures (Block. Roman, Italic or Indian) n.exc. 30 cm high complete all as specified and directed by Engr-in-charge
Writing Stops, commas, short lines, dashes, hyphens, brackets with synthetic enamel paints complete all as specified and directed
Excvation over areas n.exc 1.50m deep and getting out in soft/loose soil complete all as specified and directed
M&L for 100 mm thick cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) finishing smooth & even with using extra cement complete all as specified and directed.
M&L for forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound garde B complete all as specified and directed
Excavation in post holes n.exc 0.50 cum, getting out, returning filling in and ramming earth, watering and removing surplus soil n.exc 50 m in soft/loose soil complete all as specified and directed.
M&L for brickwork with fly ash bricks, straight or curved on plan.exc 6m built in cement mortar (1:6) complete all as specified and directed
M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work finished even and smooth without using extra cement complete all as specified and directed
M&L for steel work in tubular Post/columns including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade ST-240, complete all as specified and directed.
S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed
M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc 10cm long and dia 12mm complete all as specified and directed
M&L for preparation surfaces of steel over 10 cm width or girth and apply of two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for 200 mm thick Kankar or laterite, ( mixing of fly ash, clinker and stone dust in the proportion of of 1:3:6 ie 10% fly ash, 30% clinker and 60% stone dust ) spread, rolled and consolidated to gradient and camber required complete all as specified and directed
M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed
M&L for Cement Concrete, 1:2:4, type B1 (using 20mm graded stone aggregate) as in bed block, coping ,lintel upto 1.50 m span, cills, kerbs etc complete all as specified and directed
S&F capacity 1000 Ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top, minimum three layer) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting complete all as specified and directed by Engineer in Charge (Make: Sintex/Vectus/Prayag)
S&F high pressure PTMT float valve with epoxy coated alluminium rod and high density polythelene ball screwed for iron pipe 25 mm dia with fly nut complete all a as specified and directed.
M&L for 25 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete all as specified and directed
S&F 25 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.
S&F 50 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.
EM PORTIONS M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
All as per item No 116.00 mentioned here-in- above but One 3 pin 5 Amps socket out let points on independent board complete all as specified and directed
All as per item No 116.00 mentioned here-in-above but 5 Amp socket on same board with other switches complete all as specified and directed.
M&L for wiring for socket out let on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
S&F switch piano flush type, single pole , 5/6 Amps, one way complete all as specified and directed.
S&F switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified and directed.
S&F socket outlets 2 in 1, 3 pin, 5/6 Amps flush type230/240 V complete all as specified and as directed .( For Same Board only)
S&F switch socket combination 5 in 1 , 6 pin , (5/16 Amps ) flush type controlled by one switch complete all as specified and directed.
S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed.
S&F stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified .
S&F building security light fittings 25 watts, minimumm system lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as specified and directed.
S&F 18 W LED light fitting wall mounted batten 4'ft, extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt, 6000K including necessary connection complete all as specified and directed.
S&F epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 230 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed
S&F MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating)
S&F MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection complete all as specified and directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating)
M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth wire electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. (Note :- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the eath testing register, prepared and to be maintained by the contractor & submited to Concerned JE E/M. (iii) T&P and testing instrument(Meger) to be provided by the contractor at own cost.
S&F BLDC ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed
S&F ventilating exhaust fan 300 mm sweep 230 volt AC complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible copper conductor (23/.0076) of suitable size complete all as specified and directed.
Supply, laying / fixing / connecting, testing and commissioning of 10 Sqmm x 2 core LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) all as directed by the Engr-in-Charge for the following ratings (Note: Excavation,sand cushioning,brick will be measured and paid separtely).
M&L for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . (Note : Punned thickness 18 cm shall only be considered for payment)
Supply and lay in trenches fly ash bricks, for cable protection complete all as specified and directed by the Engr-in-Charge.
S&F pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement complete all as specified and directed.
M/S TILKU ENTERPRISE
JYOTIRMOY TRADING
UNITED BUILDERS
Hooghly Construction Co.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .