CERTAIN SPECIAL REPAIR AND MINOR WORKS AT SUNJUWAN UNDER GE JAMMU

Amount

B/R Portion: - Demolition of brickwork or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed.

Demolition of cement concrete (unreinforced) or tiling etc in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of cement concrete (reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc including brushing with neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified and as directed.

Taking down cement plaster / wall tiles including backing etc from brick / stone walls / concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Taking down chowkhats or frames including shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkhats or frames including shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4.0 Sqm each complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and as directed.

Taking down easing and adjusting shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each and refixing in the same opening complete all as specified and as directed.

Material and labour including replacement of brick work with sub class ‘B’ bricks (old size), straight or curved on plan exceeding 6m in mean radius, built in cement mortar (1:6) complete all as specified and as directed.

Material and labour including replacement of for brick work with sub class ‘B’ bricks (old size), straight or curved on plan exceeding 6m in mean radius, built in cement mortar (1:6) but except bricks i.e. using serviceable bricks obtained from Serial item No. 11.00 here-in-before complete all as specified and as directed.

Material and labour for pressed steel frames of size 125mm x 60mm made of 1.25mm thick mild steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete all as specified and as directed. Note: - PCC for filling of hollow portion shall be measured and paid for separately.

Material and labour for pressed steel frames of size 105mm x 60mm made of 1.25mm thick mild steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete all as specified and as directed. Note: - PCC for filling of hollow portion shall be measured and paid for separately.

Material and labour for PCC (1:3:6) nominal mix type C-0 (using 12.5mm graded crushed stone aggregate) as in filling of pressed steel door frames / chowkhats complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregates) as in anchoring hold fast, parapets, coping, apex plates, bed plates and the like including weathering, slightly rounded or chamfered angles and throating etc. complete all as specified and as directed.

Supply and fixing 35mm thick second class hard wood (Sal/Hollock), glazed and skeleton shutters (factory made), open, rebated and prepared to receive glass or gauge etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in clause 8.24 (a) of SSR Part-I complete all as specified and as directed.

Description all as per Ser item no. 17.00 here-in-before but partly panelled shutters (bottom portion) and partly skelton shutter (top portion) suitable for fly proofing complete all as specified and as directed.

Supply and fixing 35mm thick factory made second class hard wood (Sal / Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides. The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkhats complete all as specified and as directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II complete all as specified and as directed.

Description all as per Ser item no. 20.00 here-in-before but wood grain printed PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with pinted sheet complete all as specified and as directed.

Material and labour for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of mild steel tube for top and bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet 5mm thick to be fitted in mild steel frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplied and fitted in the frame at site as per specification and drawings shown in SSR Part-II complete all as specified and as directed.

Description all as per Serial Item No. 22.00 here-in-before but wood grain printed PVC sheet used instead of plain colour PVC sheet and 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading complete all as specified and as directed.

Supply and fixing aluminium anodized powder coated (minimum thickness 50 micron) sliding window (Two track) consisting of two shutters of glazed including all necessary fittings and flyproof mesh shall be fixed on external face of window frame with aluminium beads, the following items shall be included in quoted rate of this item: - (a) Aluminium powder coated frame of section 63.5 x 38.10 mm x 1.02 mm thick with or without rebates. (b) Aluminium powder coated window shutters of section 40 x 18 mm x 1.25 mm thick (Both shutter of glass) including self locking catch and roller etc. (c) 4.0 mm thick coloured or tinted glass glazing as in aluminium window / ventilator with aluminium hollow beading / glazing clip (included with shutters) size 19mm x 17mm made out of 0.70mm thick hollow section weighing not less than 0.97 Kgs / RM including rubber gasket. (d) Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples and aluminium beads.

Description all as per Ser item no. 24.00 here-in-before but as in bath / water closet vents (sliding upside) complete all as specified and as directed by Engineer-in-Charge.

Material and labour for framed work as in grills, gratings etc with end of bars shouldered or riveted or forged into spikes, framed guard bars confirming to Fe-290 Grade 'E' 165 complete all as specified and as directed. Note: - Grills (8 mm squre bars & 6mm th Steel flat bars) shall be fixed in wall with steel screws not less than 100 mm long as inner face of aluminium windows.

Material and labour for hasp and staple 100 mm in size, aluminium anodised, including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Supply and fixing in repair 18 / 19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, including necessary wooden or PVC lipping all around fixed with screws / nails to timber frame or wooden cleats work as in shelves of cupboards etc complete all as specified and as directed.

Supply and fixing 25 mm dia stainless steel rod as in cloth hanging rod fixed with wooden cleats / brackets complete all as specified and as directed.

Supply and fixing for butt hinges 100 mm long, stainless steel, medium weight and fixed complete all as specified and as directed.

Supply and fixing aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

Supply and fixing aluminium anodised, barrel tower bolts 200 mm of extruded section and fixed complete all as specified and as directed.

Supply and fixing aluminium anodised, barrel tower bolts 150 mm of extruded section and fixed complete all as specified and as directed.

Supply and fixing aluminium anodised, handles 150 mm of extruded section and fixed complete all as specified and as directed.

Supply and fixing aluminium anodised, handles 125 mm of extruded section and fixed complete all as specified and as directed.

Supply and fixing for floor door stopper of 140mm long cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Supply and fixing mild steel 300mm, ordinary rat tail rod pattern springs includding roller and roller plate complete fixed with screws or necessary welding to pressed steel door frame complete all as specified and as directed.

Supply and fixing stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixing in repair 25mm outer dia stainless steel decorative drapery rod (Model No: - SS-25FL of Vista) of thickness 20 gauge and for every 01 RM length, provide 10 numbers stainless steel wings (Model No: - SS CRNG of Vista) with 50 mm dia and proportionate for part there off, with stainless steel brackets (Model: - SS 25 BR, Vista) near to ends with stainless steel finials (Model: - SS-1 of Vista with adapter) for 25mm dia drapery rod at both ends complete all as specified and as directed. Note: - The drapery rod shall be projecting 150 mm outer side from the clear opening of doors / windows (including necessary fittings).

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing, etc. and making good, cutting not exceeding 20 cm girth in brick walls complete all as specified and as directed.

Supply and fixing CPVC (Chlorinated poly vinyl chloride) pipes, bore (inner dia) of pipe in 15 mm of pressure rating 10 kgf/cm² fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and as directed. Note: - The rate for pipe including all pipe fittings such as ends, elbows, unions, tees reducing tees, adapters, sockets, plugs, house clips as well as brass threaded fittings for all opening / connections such as Bib taps / Stop valve etc.

Supply and fixing steel water tubing 15 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified and as directed.

Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings complete all as specified and as directed.

Supply and fixing CPVC (Chlorinated poly vinyl chloride) pipes, bore (inner dia) of pipe in 20 mm of pressure rating 10 kgf / cm² fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and as directed. Note: - The rates for pipe including all pipe fittings such as ends, elbows, unions, tees reducing tees, adapters, sockets, plugs, house clips as well as brass threaded fittings for all opening / connections such as Bib taps / Stop valve etc.

Refixing old steel tubing 20 mm bore and connections in new or old position (walls, ceiling, floor etc.) complete all as specified and as directed.

Supply and fixing in repair rotational moulded polyethylene water storage tanks three layers of 500 litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part - I including 20mm thick ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm - 210 grams) including dismantling of old broken water tanks and refixing of inlet, outlet and overflow pipe etc complete all as specified and as directed.

Supply and fixing CPVC (Chlorinated poly vinyl chloride) pipes, bore (inner dia) of pipe in 25 mm of pressure rating 10 kgf / cm² fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and as directed. Note: - As overflow pipe extended upto rain water pipe or 45 cm beyond external face of wall.

Supply and fixing in repair stop valve (ISI marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20 mm bore and fixed complete all as specified and as directed.

Supply and fixing in repair bib tap 15 mm bore long body, brass chromium plated, fancy type (long shank), with crutch or butterfly handle screwed down, screwed for iron / PVC pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fixing in repair stop valve / angle valve (ISI marked), fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron / PVC pipe or for unions of 15 mm bore and fixed complete all as specified and as directed.

Supply and fixing in repair overhead shower, 65 mm ABS shower (without arms) complete all as specified and as directed. Make: - PRAYAG CAT Part No BS-29 or equivalent in JAQUAR, CERA, ARTIZE.

Supply and fixing in repair soap dish cantabile-clea (material stainless steel finish, glossy) fixed to plugs with chromium plated brass screws complete all as specified and as directed. Make: - PRAYAG CAT Part No BA-155 or equivalent in JAQUAR, CERA, KOHLER.

Supply and fixing in repair corner glass shelf with bracket fixed with chromium plated brass screws and wooden / plastic cleats complete all as specified and as directed. Make: - ACN-1173 of JAQUAR or equivalent in CERA, KOHLER.

Supply and fixing in repair vitreous china squatting pan of pattern, long pan, 'Orissa pattern', size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) but including provision of lime concrete complete all as specified and as directed.

Supply and fixing in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle (including bracket, supply and fixing flush pipe PVC 32 mm dia) capacity of 10 litres complete all as specified and as directed.

Material and labour for: - (a) 15mm thick plaster in cement sand mortar (1:3) mixed with water proofing compound, all as per manufacturer’s instructions shall be applied both on floor and wall. The surfaces than shall be cured and allowed to dry. All the joints of pipe shall be sealed properly. Note: - Provision of spout pipe as extended 45 cm beyond external face of wall to be measured and paid separately. (b) Apply a coat of moisture cured high tensile elastomeric modified polyurethane based liquid membrane on floor as well as on wall as per manufacturer’s instructions, after the treatment over, sunken portion shall be kept full of water for at least one week to check that no seepage is seen from the external wall / concrete surfaces.

Material and labour for cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in mass filling, in sunken slab of toilets complete all as specified and as directed.

Supply and fixing in repair sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe overall size 915 mm x 460 mm and bowl size 410mmx330mmx160mm complete all as specified and as directed.

Material and labour stainless steel plate rack (utensil rack) of size (900mm x 750mm x 250mm) made out of AISl 304 stainless steel 0.63 mm thick sheet fixed with brass screws of required size including necessary fittings / nuts, bolts and washers complete all as specified and as directed.

Supply and fixing in repair vitreous china wash basin, white flat back, size 550 x 400 mm excluding taps, waste chain and plug and porcelain stopper but including vitreous china pedestal and PVC waste pipe with union, flexible suitable for wash hand basin or urinal, 32 mm dia.complete all as specified and as directed.

Supply and fixing 32 mm dia, low density polyethylene pipes (LDPE) of pressure rating 6 kgf / cm² suitable for waste pipe etc fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed.

Supply and fixing in repair pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without letter 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for 15 mm dia bore of pipe complete all as specified and as directed.

Supply and fixing in repair brass chromium plated towel rail 20mm dia 'D' type 60 cm long between flanges complete all as specified and as directed.

Supply and fixing in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

Supply and fixing in repair stainless steel, Hat and coat hooks, solid body, 175mm to 250 mm complete all as specified and as directed.

Supply and fixing in repair PVC connection 15 mm bore with PTMT nuts of length 450 mm long complete all as specified and as directed.

Material and labour in repair PVC (SWR) floor trap, dia of outlet in 75 mm, plain excluding grating, but including jointing with solvent cement fixed complete all as specified and as directed.

Supply and fixing in repair PVC grating square, 150 mm (hinge pattern and with or without hole) complete all as specified and as directed. Make: - PRAYAG Cat Part No - 115 or equivalent in POLYTUFF, ASTRAL.

Supply and fixing in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fixing in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and as directed.

Supply and fixing in repair 110 mm bore PVC (SWR) bends any radius, with or without excess door complete all as specified and as directed.

Supply and fixing in repair 110 mm bore PVC (SWR) junction single, (single 'T') equal or unequal, with excess door complete all as specified and as directed.

Supply and fixing in repair 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

Supply and fixing in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fixing in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and as directed.

Supply and fixing in repair 75 mm bore PVC (SWR) bends any radius, with or without excess door complete all as specified and as directed.

Supply and fixing in repair 75 mm bore PVC (SWR) branch piece, single (Single 'Y') equal or unequal, with excess door complete all as specified and as directed.

Material and labour for non skid ceramic jointless coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar (1:4) complete all as specified and as directed.

Material and labour for non skid ceramic jointless coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick screed layer in cement mortar (1:3) complete all as specified and as directed.

Material and labour for non skid ceramic jointless coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar (1:4) complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles of size 450mm x 300mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

Material and labour for 20 mm thick granite black (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills cooking platforms and like including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite laid over and including screed bed or bedding layer of mortar 15mm thick for laying floor in cement mortar (1:4) finished even and rough to receive top layer complete all as specified and as directed.

Material and labour for machine cut Kota stone slab flooring not less than 19mm thick (size of stone shall not less than 55cmx55cm), 75mm wide white marble border allround, laid over and including 20 mm thick screed base in cemnet mortar (1:6), jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine complete all as specified and as directed.

Material and labour for green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade and including screed bed or bedding layer of mortar 15mm thick for laying floor in cement mortar (1:4) finished even and rough to receive top layer complete all as specified and as directed.

Material and labour for 25 mm thick (average thickness) PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregates) as in floor by maintaining required gradient / undulation, finished even and fair complete all as specified and as directed.

Material and labour for rendering 10 mm thick plaster in cement mortar (1:3) on concrete surfaces as in ceilings finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparing newly plastered surfaces and applying three coats of white wash as in ceiling etc. complete all as specified and as directed.

Material and labour for preparing of plastered surfaces of ceiling, old decorated surfaces and applying two coats of white wash complete all as specified and as directed.

Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of newly plastered surface of wall and applying 3mm thick acrylic wall care putty on wall surfaces complete all as specified and as directed.

Material and labour for preparation of newly plastered surface of wall and applying two coats of oil bound distemper, white or tinted shade complete all as specified and as directed.

Material and labour for complete removal of existing treatment of wall surfaces and applying two coats of oil bound distemper, white or tinted shade complete all as specified and as directed.

Material and labour for applying 3mm thick acrylic wall care putty on wall surfaces complete all as specified and as directed.

Material and labour for rendering 15 mm thick in two layers (10 mm in base layer in (1:6) and 5 mm thick in (1:4) in second layer) on fair faces of brick work or concrete surface in cement mortar (1:4) finished even and smooth without using extra cement including water proofing compound complete all as specified and as directed. Note: - Water proofing compound will be measured and paid separately.

Taking down cement plaster and decayed concrete of any description, upto triple storey of building, from roof projection, chajja etc and making good the decayed portion with cement mortar (1:3) mixed with water proofing compound as per manufacturer's instruction or PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) including necessary formwork and finally finished the surface with 15mm thick cement plaster in cement mortar (1:3) complete all as specified and as directed.

Material and labour for preparing newly plastered or concrete surfaces of wall and applying two coats of all weather coat or apex paint complete all as specified and as directed.

Material and labour for complete removal of existing treatment of wall surfaces and applying two coats of all weather coat or apex paint complete all as specified and as directed.

Material and labour for preparation of new or previously untreated steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Material and labour for preparing of old painted surfaces of steel or iron surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparing of new or previously untreated surfaces of wood of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for preparing of old painted surfaces of wood of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for 50 mm thick cement concrete (1:2:4) type B-2 (using 40mm graded crushed stone aggregate) as in plinth protection finished even and smooth using extra cement (including necessary joint filling with mixture of paving bitumen and sand in (1:3)) complete all as specified and as directed.

Material and labour for mild steel work in tubular trusses or rectangular hollow section including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS-1239 (Part I-1990) as in sun shed to window / door etc. complete all as specified and as directed.

Material and labour for prepainted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Material and labour for 25 mm thick (average thickness) PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregates) as in floor by maintaining required gradient / undulation, finished even and fair as in roof padding including preparation of surface and mix with water proofing compound and finished even and fair without using extra cement complete all as specified and as directed. Note: - Water proofing compound will measured and paid separately as supply only.

Material and labour for complete removal of the existing roof treatment any no's of layers taken out membrane, PCC padding / roof, tiles etc including grabbing up of tree roots, roughening and preparation of surfaces of old concrete floor by picking, scrubbing down with steel brushes, sweeping, cleaning and washing down with water to remove dust etc. and applying the following roof treatment complete all as specified and as directed. (a) Applying 1st course of 15 mm thick screed bed with cement mortar (1:4) over old concrete surface. (b) Applying 2nd course of bituminous primer @ 0.4 kg / Square Metre conforming to IS-3384 over screed bed. (c) Applying 3rd course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180 centigrade and applied @ 1.2 kg / Square Metre. (d) Applying 4th course of APP (Atactic Polypropylene) modified polymeric 3mm thick, weight not less than 3.6 kg/Square Metre with 160 grams/Square metre non woven polyster made at center core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane shall be laid with LPG torch and overlap sealed and finished neat. (e) Applying 5th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180 centigrade and applied @ 1.2 kg/Square metre. (f) Applying a coat of bituminous based aluminium paint as finishing coat.

Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old PVC rain water pipes with fittings complete all as specified and as directed.

Material and labour for TMT bars (Fe 500), 10 mm dia and over in reinforcement cut to length, bent to shape required including bending spirally cranking, hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Description all as per Ser Item No 110.00 here-in-before but 8mm dia complete all as specified and as directed.

Material and labour for precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in cover slab set in cement mortar (1:6)complete all as specified and as directed. Note: - Reinforcement shall be measured and paid separately.

Material and labour for providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness and size / shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Cleaning / clearing of sewage line (including manholes) 100mm to 150mm bore of any description, underground at any depth, removing any type of blockage including desilting, descaling and dechoking of drains as well as manholes and depositing the sludge in a pit (including digging of pit) not less than 100 metres away from the site of cleaning and covering the sludge with layer of 2.5cm thick layer of earth and spraying unslacked lime on the pit and make line smooth functional complete all as specified and as directed.

Cleaning of blocked water closet / floor trap / gully trap etc. including and upto first manhole manually and well flushing with clear water, making the seat functional including depositing the sludge in a pit (including digging of pit) not less than 100 meter away from site of cleaning and covering the deposited sludge with minimum 25cm thick layer of earth and spreading unslacked lime on the pit complete all as specified and as directed by Engineer-in-Charge.

Supply only liquid water proofing compound @ 0.200 litre per 50 kg of cement cement or as per manufacturer's instructions complete all as specified and as directed.

Material and labour for rendering 5 mm thick plaster in cement mortar (1:3) on concrete surfaces as in ceilings finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 100 mm thick cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection concrete shall be laid in alternate bays not exceeding 3.0 metre length finished fair and even complete all as specified and as directed.

Excavation over area not exceeding 1.5m deep and getting out in hard dense soil complete all as specified and as directed.

Excavation over area but exceeding 1.5 m and not exceeding 3.0m deep getting out in hard dense soil complete all as specified and as directed.

Material and labour for cement concrete M-10 (nominal mix) (using 40 mm graded crushed stone aggregates) in foundation, filling and mass concrete complete all as specified and as directed.

Material and labour for RCC (design mix) M-25 (with water proofing compound, water proofing compound measured and paid separately) as in walls, basement wall of any thickness above top of footings including attached pillasters and buttresses complete all as specified and as directed.

Material and labour for formwork to sides of concrete foundation footing base of columns and raft beams sides and soffits (if any) of plinth beams complete all as specified and as directed.

Material and labour for formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work with rough finished complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar (1:3) (with water proofing compound, water proofing compound measured and paid separately) finished even and smooth without using extra cement complete all as specified and as directed.

Returning, filling in soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed.

Removal of excavated material as soil not exceeding 50m and at a level not exceeding 1.5m above the starting point and depositing complete all as specified and as directed.

Material and labour for forming embankments including raising (or lowering) earth, spreading in layers not exceeding 30cm thick; watering, ramming / rolling and finishing to required size, shape, etc., not exceeding 1.5m high from base complete all as specified and as directed.

Supply and fixing gun metal, glove or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and as directed.

Supply and fixing steel water tubing 25 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified and as directed.

Cutting existing steel tubing bore in 25 or 32 mm for alterations or additions (Each cut measured) and if necessarily done in position without taking down complete all as specified and as directed.

Supply and fixing powder coated aluminium sliding window (three track) consisting of two shutters of glazed and one shutter of flyproof complete all as specified and as directed. Notes: - The item shall be included as following: - (a) Aluminium powder coated frame of section 100 x 44 mm x 1.5 mm with or without rebate. (b) Aluminium powder coated window shutters of section 40 x 20 mm x 1.5 mm thick (Two shutter of glass and one shutter of wiremesh) including self locking catch and roller etc). (c) 4.0 mm thick coloured or tinted glass glazing as in aluminium door / window / ventilator with aluminium hollow beading / glazing clip (included with shutters) size 19mm x 17mm made out of 0.70mm thick hollow section weighing not less than 0.97 Kgs/RM including rubber gasket. (d) Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

Material and labour for brick work with sub class ‘B’ bricks (old size), straight or curved on plan exceeding 6m in mean radius, built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for brick work with sub class ‘B’ bricks (old size), straight or curved on plan exceeding 6m in mean radius, built in cement mortar (1:6) but except brick i.e. using serviceable bricks obtained from Srl item No. 133.00 here-in-before complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparing newly plastered or concrete surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and as directed.

E/M Portion: - Taking down old unserviceable copper / aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixtures and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type of switch board wooden / iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

Material and labour in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 3 run 6 Sqmm for phase and neutral and one run of 6.0 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase / neutral and one run of cable for earth will be measured and paid as one unit length including taking down old wiring complete all as specified and as directed. Note: - Wiring shall be done in proper colour coding.

Material and labour for point wiring one light point or one fan point controlled by one switch complete with 1.50 Sqmm copper conductor multistranded PVC insulated FRLS and unsheathed cable in existing PVC rigid concealed conduit with new cast iron / pressed steel sunk terminal box covered with 3 mm thick laminated sheet hylam brand IS-2036 marked with continuous PVC insulated multistranded copper wire 1.50 Sqmm dia FRLS PVC insulated complete all as specified and as directed.

Description all as per Ser item No 140.00 here-in-before but for multi 5 pin 5 amp socket outlet on same board complete all as specified and as directed.

Description all as per Ser item No 140.00 here-in-before but for multi 3 pin socket outlet 5 amp socket on independent board complete all as specified and as directed.

Description all as per Ser item no 140.00 here-in-before but for One light point controlled by two 2-way switches, with cables 1.5 Sqmm size complete all as specified and as directed.

Description all as per Ser item no 140.00 here-in-before but for One Bell / Buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 Sqmm size complete all as specified and as directed.

Description all as per Ser item No 140.00 here-in-before but for multi 3 pin 15 Amp socket outlet independent controlled by 15 Amp switch with 2.5 Sqmm copper conductor multistranded cable PVC insulated FRLS and unsheathed cable in and including PVC rigid concealed conduit 20/25 mm dia and unsheathed copper conductor multistranded cable 2.5 Sqmm as earth wire FRLS PVC insulated in green color complete with new cast iron / pressed steel sunken black with hylum top sheet cover complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement of existing boxes with modular metal flush box ½ module, 240 volts ISI marked complete all as specified and as directed.

Supply and fixing in replacement of existing boxes with modular metal flush box 4 module, 240 volts ISI marked complete all as specified and as directed.

Supply and fixing in replacement of existing boxes with modular metal flush box 8 module, 240 volts ISI marked complete all as specified and as directed.

Supply and fixing in replacement of modular white cover plate with frame 1 module, 240 volts ISI marked complete all as specified and as directed.

Supply and fixing in replacement of modular white cover plate with frame 2 module, 240 volts ISI marked complete all as specified and as directed.

Supply and fixing in replacement of modular white cover plate with frame 4 module, 240 volts ISI marked complete all as specified and as directed.

Supply and fixing in replacement of modular white cover plate with frame 8 module, 240 volts ISI marked complete all as specified and as directed.

Supply and fixing in replacement modular switch 1 way 6 A, 1 module, 240 volts ISI marked complete all as specified and as directed.

Supply and fixing in replacement modular socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed.

Supply and fixing in replacement modular switch socket combination 16 A, 6 pin, 3 module complete all as specified and as directed.

Supply and fixing in replacement ceiling rose, 3 Phase / PVC / polycarbonate isolated body complete all as specified and as directed.

Supply and fixing in replacement modular fan step regulator, 120W 1 module, 240 volts ISI marked complete all as specified and as directed.

Material and labour in replacement for lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

Material and labour in replacement of self ballast LED retrofit lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and as directed.

Supply and fixing in replacement LED light fitting 1 x 20 W, 220 V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor >0.95, 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete (4' ft long) with LED rod 20 watt, 230 Volts 50 Hz complete all as specified and as directed.

Supply and fixing in replacement of LED light fitting 1 x 9 W / 1 X 10 W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing exhaust fan, steel body AC single phase, 230V of size 300m sweep with blades and frame and louvers including taking down old one and deposited to MES Store. Making holes for 300 mm exhaust fan of suitable shape and size into or through brick walls including plastering for making good to the original surfaces of any description disturbed including painting / distemper matching with the existing colour including taking down old one and deposited to MES store complete all as specified and as directed. Note: - The rates includes for making good to the original surfaces of any description disturbed including painting / distemper matching with the existing colour.

Material and labour for replacement of distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.

Supply and fixing in replacement SPN 40 amp to 63 amp rating 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing in replacement 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp, in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed.

Material and labour including replacement for earthing complete with galvanised mild steel earth plate electrode of size 600 x 600 x 6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 metre deep below normal ground level with top edge of the earth plate not less than 1.5 metre below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC (1:2:4) type B-1 precast RCC cover slab using reinforcement with suitable handle made of round bar including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and as directed.

Supply and fixing including replacement LED street light fitting 35 watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP-65/66 protection complete power factor > 0.95, 100 lumen/watt, CCT minimum 5700K complete all as specified and as directed.

Supply and fixing in repair ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep minimum air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) only BLDC fan complete all as specified and as directed.

Taking down fans and security lights of any type including sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and as directed.

Supply and fixing in repairs of vertical distribution board (TP&N) 4 way double door suitable for and including MCCB 125 Amp 16 KA four pole as incomer and outgoing MCB's and should be IP-43 protected with copper bus bars, neutral links, earthing bar including taking down old unserviceable distribution board / MCB any type complete all as specified and as directed. Notes: - (i) Rate includes MCCB four pole 125 Amp, 16 KA, 415 volts with adjustable thermal settings. (ii) MCB's shall be measured and paid separately. (iii) TPN distribution board and MCCB should be of same make.

Supply and laying XLPE insulated armoured 16 Sqmm 4 core heavy duty electric cable with aluminium conductor, 1100 volts grade complete all as specified and as directed.

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in any type of soil complete all as specified and as directed.

Supply and laying including replacement of dry bricks over cable as mechanical protection laid flat with width equal to length of brick with sub class 'B' bricks complete all as specified and as directed.

Material and labour in repair for galvanised iron pipe 'light grade' for road crossing / on wall / on pole with fixed clamps, nuts, bolts for cable protection of size 25 mm dia complete all as specified and as directed.

Supply and laying dry river sand as cable cushioning 15 cm thick layer before laying and 8 cm thick over cable after laying the cable in trenches complete all as specified and as directed.

M/S Sukhmani Construction Co. (BID ID -3098033)

M/S VED PAUL MAHAJAN (BID ID -3097675)

M/S GHULAM MOHIUDDIN RATHER (BID ID -3112948)

M/s KULDEEP KUMAR CONTRACTOR (BID ID -3099220)

M/S TRIKUTA BUILDERS (BID ID -3112791)