DAY TO DAY MAINTENANCE INCLUDING PLUMBING CARPENTER WORKS MASONARY WORK IN NAVAL DOCKYARD UNDER AGE B R I NW KUNJALI UNDER GE NW KUNJALI

Amount

Resecuring and refixing in same opening without taking down of chowkats or frames with shutter (Without taking off from frame) but n.exc 1.5 sqm complete all as specified and directed by Engineer-in-Charge.

Resecuring and refixing in same opening without chowkats or frames with shutter exc 1.5sqm but n.exc 4 sqm each but (without taking off shutter from the frame) complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames with shutter (Without taking off from frame) n.exc 1.5 sqm complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames with shutter exc 1.5sqm n.exc 4 sqm each but (without taking off shutter from the frame) complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description exc 1 Sqm but nexc 2 sqmcomplete all as specified and directed by Engineer-in-Charge.

All as per Ser item No. 5.00 but exc 2 Sqm eachcomplete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge.

Material and Labour for rolled mild steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed by Engineer-in-Charge.

Material and Labour Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., of grade Fe 410 -W(Gde-E- 250) quality- A complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240. complete all as specified and directed by Engineer-in-Charge.

Material and Labour in repairs for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hook and including scaffolding upto any height complete all as specified and directed by Engineer-in-Charge.

Material and Labour in repairs for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Rolled mild steel in Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. confirming to Fe-410-W (Gde-E-250) quality-Acomplete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparing New or previously untreated steel surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster of any description hacking for key, raking out joints and scrubbing down with water etc to receive plaster and removing debris outside MD land incl necessary scafolding complete all as specified and directed by Engineer-in-Charge.

Material and Labour Plastering 15mm thick in CM 1:6 on brick surfaces, finished with Neeru finish on walls complete all as specified and directed by Engineer-in-Charge.

Material and Labour Plastering 5mm thick in CM 1:3 on concrete surfaces as in ceiling finished even & smooth without using extra cement in ceiling complete all as specified and directed by Engineer-in-Charge. .

Material and Labour for rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified and directed by Engineer-in-Charge. (Water proofing compound to be measured and paid for separately).

Supply only integral water proofing compound complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs Second class hard-wood in scantlings clean sawn. complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 2nd class hard wood (sal) plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 35mm thick factory made 2nd class HW rail & stile plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 ( Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 40 mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation of newly plastered surfaces on ceiling surfaces and applying two coats of oil emulsion distemper over a coat of primer on ceiling surfaces complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two coats of weather proof acrylic based paint (100% acrylic) over one coat of cement based primer with necesssary scaffolding for high rise blds upto ixth floor complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparing old painted surface steel surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint with necessary Scaffolding for high rise buildings upto G+9 floor complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation of new or previously untreated painted wooden surface surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer incl necessary scafolding complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation of old painted wooden of any description over 10cm width or girth and applying one coat of synthetic enamel paint incl necessary scafolding complete all as specified and directed by Engineer-in-Charge.

Taking down PVC eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 160 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, ceilings or in floor etc with and including fixing clips bends elbow, shoes bends etc (Note :- Measurement shall be taken along the centre line of the pipes) complete all as specified and directed by Engineer-in-Charge. .

Supply and Fixing 110mm dia PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 75mm dia PVC ( SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing for PVC (SWR) bends any radius 160mm bore complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 110 mm dia PVC ( SWR) grade double T/Y with access doors including fixing clips complete all as specified and directed by Engineer-in-Charge.

All as per item No 35.00 above but 75mm dia complete all as specified and directed by Engineer-in-Charge.

Material and Labour Plain, black, mild steel sheeting, 1 mm thick in ridges, hips, valley gutters,drip and straight flashings (length and girth as fixed) complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc complete all as specified and directed by Engineer-in-Charge.

Material and Labour brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

Material and Labour for brick work with sub class 'B' bricks , straight or curved on plan to any radius in half brick thick wall built in cm 1:4 complete all as specified and directed by Engineer-in-Charge.

Dismantling of Wall panelling, partition and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including Aluminium grid frame work. complete all as specified and directed by Engineer-in-Charge.

Material and Labour for false ceiling made out of 600 x 600 x 4 to 6 mm thick ceiling gypsum board/tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50 x 40 x 0.63 mm and cross tee of size 23.50x23.50x0.63 mm and angle size 19x19x0.63 mm including 3 mm GI wire for suspending bolts necessary washers board/nut/cleats/pin hook etc for securing frame work to ceiling to the snap grid including provn of necessary holes/cutting for providing light/fan as required including making necessary recesses/projected pattern complete all as specified and directed by Engineer-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) and rubbish off of the premises complete all as specified and directed by Engineer-in-Charge.

Material and Labour for (450mm x300mm ) x 7 mm thick coloured glazed ceramic tiles as in dado/vertical services set and jointed in neat cement slurry and pointed in coloured cement to match the surface incl 10 mm thick backing coat in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation and applying two coat of floor/Roof paint (Make-Indigo Floor paint). complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Powder coated aluminium frame for doors, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 3 mm thick aluminium composite panel cladding plain of approved colour/shade to beam/column/slab including/rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour & aluminum tubular hollow section 25 x 25 mm not exceeding 900 mm C/C on column/beam/slab to hold ACP cladding etc (Note : colour/pattern of ACP sheet shall be given by GE). complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing concealed star lock powder coated for aluminium window fixed as per manufacturers instructions complete all as specified and directed by Engineer-in-Charge.

Demolition of Unreinforced cement concrete of any description and in any position not other wise specifically provided for complete all as specified and directed by Engineer-in-Charge.

Material and labour for cement concrete 25 mm thickType B1 1:2:4 (20 mm graded aggregate) as in floor/roof complete all as specified and directed by Engineer-in-Charge.

Material and Labour for cement concrete type B1 1:2:4 (20 mm graded aggregates), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. complete all as specified and directed by Engineer-in-Charge.

Taking down 15mm bore, GI tubing and connections including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge.

All as per item No 55.00above but 20 mm bore GI Pipe complete all as specified and directed by Engineer-in-Charge.

Dismantling 100/75 mm bore, cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches if required complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed complete all as specified and directed by Engineer-in-Charge. .

As per item No 58.00 above but 20mm dia medium GI Pipe complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 100 mm stainless steel Butt hinges complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Aluminium anodised sliding door bolt 300m long, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing aluminium anodised Barrel tower bolts of extruded section, length of bolt 200mm complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing extruded aluminium anodised alloy handles, fabricated type 150mm size complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Floor door stopper of aluminium alloy body 150 mm long and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engineer-in-Charge.

Material and Labour stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

Material and Labour Cast Iron Nahani trap 75mm, plain with grating including setting and jointing with solvent cement to waste pipe fixed in cement concrete type B1 (1:2:4). complete all as specified and directed by Engineer-in-Charge.

Dismantling of Stone slabs laid, bedded and pointing in any mortar and tiles of any description or thickness in floors, aprons etc complete all as specified and directed by Engineer-in-Charge.

Material and Labour for hard wear stone (of any type) granite stone slab 20 mm thick in flooring machine cut, in platform bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Material and Labour for cement concrete tiles 25cmx25cmx22mm thick, machine pressed (with grey cement & no pigments), set jointed and pointed in neat cement slurry in floors over and including 15 mm thick bedding layers in CM 1:3. complete all as specified and directed by Engineer-in-Charge.

Material and Labour for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs for aluminium anodised Deco grill 7.5 mm size DG-102, fixed to F/H frames, 1.5mm thick, bar size 6.2mm and 7.5mm thick in required sizes complete all as specified and directed by Engineer-in-Charge. by Engr-in-Charge.

Supply and Fixing in repair 12 mm thick Prelaminated medium density fibre board both side decorative lamination interior grade, fixed in aluminium/wooden frame work complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repair vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, inlet ,outlet etc complete all as specified and directed by Engineer-in-Charge. Fixed in repairs.

Supply and Fixing Vitreous china urinal partition white of size 310x700 mm slabs, terminating about 40 cm above floor line, fixed in repairscomplete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 32mm dia PVC waste pipe for WHB and urinals fixed in repairscomplete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Bathroom Cabinet Mirror 500x400 mm screwing in all corner with chromium plated brass screws and cup washers complete all as specified and directed by Engineer-in-Charge. (Make Prayag : Cat Part No 556).

Supply and Fixing Push type taps for urinals, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm dia iron pipe or for brass ferrule and fixed in repairs complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs 140mm dia overhead shower round shape single flow with air effect (ABS body & Face plate chrome plated) with rubit cleaning system complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs fancy type CP Pillar taps 15 mm dia, cast copper alloy , with capsten heads, screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs fancy type bib taps, chromium plated cast copper alloy 15mm bore with crutch or butter fly handle, screwed down, & fixed complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs fancy type angle Stop Cock valve chromium plated cast copper alloy 15mm bore with crutch or butter fly handle complete all as specified and directed by Engineer-in-Charge.

Removing building material exc. 1.50 km but n exc. 25 km outside MoD land and depositing complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repair for health faucet ( Jet) 1 m long PVC tube with wall hook chromium plated fitted to stopcock 15 mm bore complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs 10 litres capacity PVC low level flushing cistern of approved make including ball valve, syphonic set, inlet and outlet pipe, brackets etc. complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repair white glazed earthen ware vitreous Oval type china wash hand basin of size 600x700 mm with and including CI brackets, with granite including 32mm bore brass CP waste coupling Inlet/ outlet PVC flexible pipe etc complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs vitreous china wash down water closet pan coloured (pedestal pattern) including plastic sheet cover with nuts and bolts etc complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs, Plastic water closet seat, black or white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-Charge.

MADHU ENTERPRIZES

jalandhara construction

Shetty Construction Co

Vandan Enterprises