Loading
Loading…
Loading…
Tender Value
₹6.5 L
EMD Value
₹13,019
Closing Date
10 Jun 2026, 2:00 pm4d left
Executive Engineer C P Division No 5 Chandigarh
Executive Engineer C P Division No 5, Deluxe Building Ground floor Sector 9 D Chandigarh
Special Repair for Residential Building of Type II, III and VI Houses in Sector-48 of GMCH-32, Chandigarh for the year 2026-27.
2026_CHD_92793_1
EECP5/2026/2838338 dated 27.05.2026
Open Tender
Civil Works
240 days
Chandigarh
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹13,019
27 May 2026
27 May 2026
10 Jun 2026
27 May 2026
10 Jun 2026
27 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: DSR 6.2 | ||||||
| 1.01 | Cement Mortar 1:6 (1 cement : 6 coarse sand). DSR 6.2.2 | 5 | Cum | 6,125.18 | ₹30,625.9 | - |
| 2 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR 8.31 | 40 | Sqm | 1,233.72 | ₹49,348.8 | BI01010001010000000000000515BI0100001141 |
| 3Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: DSR 9.21 | ||||||
| 3.01 | 35 mmthick including ISI marked Stainless Steel butt hinges with necessary screws DSR 9.21.1 | 35 | Sqm | 2,328.05 | ₹81,481.75 | - |
| 4Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : DSR9.96 | ||||||
| 4.01 | 250x16 mm DSR 9.96.2 | 35 | Nos. | 253.56 | ₹8,874.6 | - |
| 5Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : DSR 9.97 | ||||||
| 5.01 | 150x10 mm DSR 9.97.4 | 55 | Nos. | 80.32 | ₹4,417.6 | - |
| 6Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike¬ plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer¬ in-charge: DSR 10.14 | ||||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.83 MB
BOQ_113563.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid