Design, Supply, Installation Testing And Commissioning of Combined Effluent Treatment Plant CETP MBBR Based of Capacity 15 KLD with other allied ElectroMechanical and Civil Works at Police Hospital Jammu.

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: EXECUTIVE ENGINEER, MECHANICAL &-HOSPITAL DIVISION , JAMMU

Design, Supply, Installation Testing And Commissioning of Combined Effluent Treatment Plant (CETP) MBBR Based of Capacity 15 KLD with other allied Electro-Mechanical and Civil Works at Police Hospital Jammu

MHDJ/e-NIT 378 of 2025-26 Dated: 23.02.2026 Due : 03.03.2026

Name of the Bidder/ Bidding Firm / Company :

Sl. No. 0 Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATES INCLUSIVE ALL TAXES Excise Duty GST Rs. P Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 Part : A The plant shall consist of following units, equipments, instruments and other allied accessories. Contractor must be following mentioned make and MOC . Construction/Providing & fitting of RCC Bar Screen Chamber at starting of CETP to hold bar screen for handling max flow 1.5 m3/hr . Capacity of bar screen chamber should be 0.75 m3 /hr. Grade should be M-25 0.000 job Excess(+) Full Conversion INR

2 Supply, installation, testing and commissioning of Bar Screen (SS-304 corrugated Perorated screen) inside the Bar Screen Chamber required for screening of floatable matter of sewage and effluent having max. Flow 1.5 m3/hr with mesh size of 10mm. with suitable handling arrangement. 0.000 job Excess(+) Full Conversion INR

3 Construction/Providing & fitting of RCC oil& Grease chamber located after Bar Screen Chamber to separate oil and grease from sewage and effluent handling max. flow1.0 m3/hr. Grade should be M-25 0.000 job Excess(+) Full Conversion INR

4 Construction/Providing & fitting of Collection cum Equalization Tank (with grit chamber and top slab + Platform) required to store effluent for uniform quality and continuous feeding for collecting effluent water 15 m3. Grade should be M-25 0.000 job Excess(+) Full Conversion INR

5 Construction/Providing & fitting of Brick work Sludge drying beds 2 nos. Located after Secondary tube settler tank. Capacity : 1.0 m3 0.000 job Excess(+) Full Conversion INR

6 Part : B Providing & fitting of Flash Mixture Tank having MSFRP with 5 mm sheet thickness of side walls and 6 mm thickens of bottom. Located after the collection tank for mixing and reaction of capacity of coagulation tank is 1.2m3 /hr (MSEP/WAVES/RUBY or Equivalent make) Chemical mixing with Gear Motor Box having 1.0 HP and Agitator. Agitator MOC- SS-304. Gear box make: MotovarioEquivalent . 0.000 job Excess(+) Full Conversion INR

7 Providing & fitting of Coagulation and Flocculation Tank having MSFRP with 5 mm sheet thickness of side walls and 6 mm thickens of bottom. Located after the coagulation tank for sedimentation of coagulants and flocculants. Flocculation tank having capacity is 1.2 m3 /hr (MSEP/WAVES/RUBY or Equivalent make) Chemical mixing with Gear Motor Box having 1.0 HP and Agitator. Agitator MOC- SS-304. Gear box make: MotovarioEquivalent . 0.000 job Excess(+) Full Conversion INR

8 Providing & fitting of Aeration Tank(MBBR Tank – I & II) having MSFRP with 5 mm sheet thickness of side walls and 6 mm thickens of bottom and located after Flocculation Tank to mix air for aerobic Biological treatment .Capacity of MBBR Tanks is (1.5 +1.5 m3 ) Make - MSEP/WAVES/RUBY or Equivalent make) 0.000 job Excess(+) Full Conversion INR

9 Providing & fitting of secondary tube settler tanks having MSFRP with 5 mm sheet thickness of side walls and 6 mm thickens of bottom and located after MBBR tanks and it is used for settlement of the MLSS .Capacity of Secondary tube settler Tanks is 1.2 m3 , Make - MSEP/WAVES/RUBY or Equivalent make 0.000 job Excess(+) Full Conversion INR

10 Supply of MBBR media. MOC –PP , Flower type with UV stabilize 0.000 job Excess(+) Full Conversion INR

11 Supply and fittings of Secondary tube settler media , MOC – PP, UV stabilized , Quantity : 1.5 m3 0.000 job Excess(+) Full Conversion INR

12 Supply of Microbial culture for commission and bacterial growth aeration tank, Concentrated with Microbial stains in powder form. Make: Aquazone/ Waves, Quantity: 150kg .Preparation of jiggery – 2 kg and DAP in warm water. 0.000 job Excess(+) Full Conversion INR

13 Supply, installation, testing and commissioning Semi automatic Pressure sand filter of size: Diameter: 13 inches and Height: 54 inches. MOC - FRP fitted with MS supporting Frame structure. 0.000 job Excess(+) Full Conversion INR

14 Supply, installation, testing and commissioning Semi automatic Activated carbon filter of size: Diameter: 13 inches and Height: 54 inches. MOC - FRP fitted with MS supporting Frame structure. ID – 900 vales carbon used only. 0.000 job Excess(+) Full Conversion INR

15 Supply, installation, testing and commissioning of clear water tank. MOC - PVC, Three layer. Located after Activated carbon filter. Make – Sintax ,Vectus , Euro.Capacity : 1.0 m3. 0.000 job Excess(+) Full Conversion INR

16 Supply, installation, testing and commissioning of Combined Effluent Transfer Pump (1 Working + 1 Standby). having discharge 0.75 m3/hr and head 8 m non clog self primping type located after at the top slab of equalization tank to transfer raw effluent to coagulation tank. Make : (Crompton/Kirloskar or Equivalent make) 0.000 job Excess(+) Full Conversion INR

17 Supply, installation, testing and commissioning of Air Blowers 2 Nos. (1W+1S) (Akash/Everest /Equivalen.) located near the aeration tank to supply air at the rate of 20 m3/hr at a pressure of 0.4 Kg/cm3 for mixing purpose 0.000 job Excess(+) Full Conversion INR

18 Supply, installation, testing and commissioning of Air Blowers Motor 2 Nos. (1W+1S) (ABB/Cromption /Equivalen.) located near the aeration tank to supply air at the rate of 15m3/hr. 0.000 job Excess(+) Full Conversion INR

19 Supply, installation, testing and commissioning of Aeration Grid (WAVES/RUBY or Equivalent make) located inside collection, Flash Mixture coagulation, and Flocculation and aeration Tank for transfer. 0.000 job Excess(+) Full Conversion INR

20 Supply, installation, testing and commissioning of Silicon Coarse and Fine Membrane Air Diffusers tubular silicon type (Kelvin/Reahu or equivalent make) located inside collection, coagulation, Flocculation and aeration Tank for transfer of air to Equalization, Chemical mixing and aeration tank. 0.000 job Excess(+) Full Conversion INR

21 Supply, installation, testing and commissioning of Dosing Tanks (HDPE) 3Nos. located near Flocculation and Chemical reaction tank for storage of chemical solution of capacity 75 liters each.(MSEP/WAVES/RUBY or Equivalent make) 0.000 job Excess(+) Full Conversion INR

22 Supply, installation, testing and commissioning of Dosing Pumps- 3 Nos. located near Chemical reaction tank for dosing chemical of capacity 0-6 LPH each.(UKL/E-Dose/Minidose or Equivalent make) 0.000 job Excess(+) Full Conversion INR

23 Supply, installation, testing and commissioning of Electromagnetic Flow meter. located at inlet and outlet of plant. Flow meter should be digital type with totalizer system. (Make : Novem, Aquazone or Equivalent make) 0.000 job Excess(+) Full Conversion INR

24 Supply, installation, testing and commissioning of Filter Feed Pump (1 Working + 1 Standby). having discharge 0.75 m3/hr and head 10m centrifugal, self-primping type located near to filtration system. Make : (Crompton/Kirloskar or Equivalent make). 0.000 job Excess(+) Full Conversion INR

25 Supply, installation, testing and commissioning of Centralize Electrical Control Panel. Control panel will be industrial cubical type, with non-compartment, dust and vermin proof, wall mounted .One incoming feeder will be provided which will have amp meter, voltmeter, indicating lamps and energy meter. Outgoing feeders will be as per drives of mechanical equipment. Outgoing feeder shall have contactor, overload relay, on/off push button, indicating lamp, neutral link and one set of terminal block. Panel will be epoxy coated. Job includes copper plate earthing of the panel and other electrical items. 0.000 job Excess(+) Full Conversion INR

26 Providing and fitting of Wires, Cables and Cable Trays, earthling etc. 0.000 job Excess(+) Full Conversion INR

27 Supply, installation and fitting MS supporting system i:e Ladder, Supporting system with Platform railing and Pumps and motors covers. Make : Waves/Ruby Equivalent . 0.000 job Excess(+) Full Conversion INR

28 Providing and safe storing of chemical ( Alum, Polyelectrolyte, Lime and Hypo chlorite ) 0.000 job Excess(+) Full Conversion INR

29 Providing and fitting of Complete Pipes and Fittings such as tees, crosses. plugs, sockets, elbows, reducers, supports & clamps and other allied accessories. 0.000 job Excess(+) Full Conversion INR

30 Supply, installation, testing and commissioning of Sludge Disposal Pump 2 Nos Centrifugal type of discharge 1.0m3/hr and head 8m Make - (Waha, Crompton/Kirloskar or Equivalent make) 0.000 job Excess(+) Full Conversion INR

31 Providing and fitting of allied Accessories such as Pressure gauges, Level switches etc. 0.000 job Excess(+) Full Conversion INR

32 Part : C Providing and laying of uPVC Pipeline to pipe ( IS : 4985 ) class :II, 4 kg/cm approved quality/ make including going the pipe with solvent. Diameter of pipe : 100 mm ( As per direction of engineer-in-charge) Make: prince, Supreme, Astral. (Including Demolishing, Cement concrete of pipe line, Manhole. Completer in all respect as required) Quantity : 150 meters 0.000 job Excess(+) Full Conversion INR

33 CETP Shed Cum Panel room – Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 15 meter or suitable size. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of "L" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. Complete Job. The job also includes all other necessary electro-mechanical/civil works required for the successful installation and smooth functioning for sewerage treatment plant. 0.000 job Excess(+) Full Conversion INR

34 Operation and maintenance with One year chemical for the smooth operation of CETP plant. (after warranty Period) 0.000 job Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information