Tender ID

Karnataka

Active

Works

Buildings

CONSTRUCTION OF FOREST OFFICER STAFF QUATRESS IN SUB ZONE AND STAFF QUATRESS FOR FOREST PATROL IN YELABURGA TALUKA

Rural Development and Panchayat Raj Department

RDPR Division Office Koppal | Koppal, Karnataka

Amount: ₹66.6 LCloses: 19 Nov 20266d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published12 Nov 2026
Closes19 Nov 2026
Bid Opening20 Nov 2026

Tender Value

₹66.6 L

EMD Value

₹1.3 L

Closing Date

19 Nov 2026, 4:30 pm6d left

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

EE PRE DIVISION KOPPAL

Office Number

Work Description

CONSTRUCTION OF FOREST OFFICER STAFF QUATRESS IN SUB ZONE AND STAFF QUATRESS FOR FOREST PATROL IN YELABURGA TALUKA

Tender Information

Tender ID

RDPR/2026-27/BD/WORK_INDENT30562

Reference Number

RDPR/2026-27/BD/WORK_INDENT30562

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

RDPR Division Office Koppal

Source Website

Subscribe to view

Documents Required

11 documents required · 11 mandatory

Technical Bid

RequiredAnnual Turnover Certificate with UDIN issued by CA

RequiredCost of works for which tenders already submitted

RequiredPrincipal place of business

RequiredQuantity wise work done certificate

RequiredPWD Registration Certificate

RequiredInformation of litigation in which the Tenderer is involved

RequiredList of works for which tenders acceptance letter received

RequiredLine Credit/Bankers Certificate

RequiredCost of Existing commitments & Ongoing works

RequiredWork performed as a prime contractor in the same name on works of similar nature

RequiredWork Done Certificate Not Below the rank of Executive Engineer

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Financial Year will be reckoned as the period between first day of April andThirty first day of March of succeeding year. (Both days inclusive)

The Tenderer shall obtain the required work done certificates from the Competent Authority not below the rank of Executive Engineer or quivalent. And scan the original certificates and attach the scanned file tothe bid. The Original Certificate/certificates shall be produced at the time of opening of technical bids for physical verification.

Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 -Qualification of the Tenderer in Section 2: Instructions toTenderers (ITT), will only be considered for evaluation

The tenderer shall furnish required information in all prescribed formats.Scan & upload all the original documents/Formats required for his bid to the KPPP portal. The Original documents/ Formats shall be producedat the time of opening of technical bid for physical verification

The tenderer shall note that the scanned Documents shall also be uploaded in the tasks created under Document/ Evidence required from the bidder

All materials required for this work shall be procured by the bidder himself and should get tested by the quality control authorities at his own cost before use on the work

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the standard bid document KW4 and further orders thereon

The KPWD Code, KTTP Act/ Rules, Delegation of powers and other Government orders issued by Government from time to time will apply

If the office happens to be closed on the dates notified, next working day will holds good

The field laboratory shall preferably locate, adjacent to the site with the required amenity as per the clause. Failing which 1% of the amount of work done will be penalized

18%GST shall be paid to the tendered amount separately.

The increase in GST shall not be paid in the extended period of Contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time

The tenderers shall note that as per the Government Order No.FD/850/ EXP-12/15 dated 29-12-2015 and GO No.FD/130/EXP-12/15 dated 8-9-2015 & GO no 850-12/15 Dated 15-12-2016 the exemption from Payment of EMD for Micro and small enterprises registered with NSIC procurement under single point vendor registration scheme is applicable only for purchases, but not for works

Contractor should follow strictly the prevailing rules of labour act and applicable any other law as concerned to work. In case of any mishap,accidents are cause of death it is the duty of the contractor to settle the dispute at is own cost. In no way department is held responsible

The construction materials (Minerals Metal, Sand and Murum, etc.,) shall be bought from the authorized quarries along with the mineral dispatch permit or else 5 times the royalty will be deducted as penalty as per the Directions on the Director, Mines and Geology Department Bangalore Proceedings Dated 25-03-2013

The defect liability period is one (1) year from the date of actual completion of work

Financial turn over and Financial commitments of previous years shall begiven weight age of 10% per year to bring them to the price level of 2025 26 in the technical qualification criteria

The tender period for completion of work is Six (6) Calendar months.(Including monsoon period)

The Earnest Money Deposit Rs. 1,33,000.00 through KPPP portal OR it shall be in two parts. Part (1) Rs. 1,00,000.00 through KPPP portal under any one of the option(CC/DD/NEFT/OTC) and Part (2) Balance EMD of Rs.33,000.00 shall be in favour of the Executive Engineer, PRE Division Koppal, in the form of Bank Guarantee in the prescribed format obtained from any Nationalized/Scheduled Bank. The scanned copy of the original Part(2) EMD should be uploaded along with the Technical bid. The part (2) of the EMD shall be delivered to the Executive Engineer before the prescribed Date and time of opening of the Technical Bids

The tenderer has to quote the rates are exclusive of GST and As per Government Circular No:FD/447/Expenditure

Estimate rates are excluding GST and the prevailing GST 18 percent of APT is added in the form of Lumpsum in sanctioned estimate as per the guidelines in common SR 2021-22 GO PWD51 RDF 2019 Bengaluru Date:18-03-2022. Therefore, APT or ECV is excluding GST. In KPPP portal there is no option to add GST separately over and above APT during DTS process. Hence even through the tender has been invited by opting for the INCLUSIVE option, the item wise rates do not include GST. Hence GST will be paid separately for the quoted amount as per the Govt. circular no FD/447/expenditure/12/ 2022/dt -30-07-2022. Therefore GST declaration certificate must be uploaded mandatory by the prospective bidders

All necessary arrangements shall be made and precaution taken to prevent completely or partially, damage to the structure or labours/employees during construction period. (As per recent Labour Act) Contractor shall be fully responsible for any damage to the structure during the construction and maintenance period. Any damage caused due to any reasons shall be procurement rectified/replaced at his own cost as per the direction of Engineer in charge. Nothing shall be payable by the Department on account of inclusive of all such arrangements/ precautions work needed

Above Tender amount will not be given

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity till completion. Contractor should indemnify the client to that extent

The awarded Contractor has to submit his bills through e-MB for payment. (Billing is through e-Mb i.e., Contractor has to produce Soft copy and hard Copy of RA or Final bill for payments), as per the GO No FD 56 Pro. Cell 2004, Bangalore Dated 18th January 2005

The Bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end

The proposed methodology and program of construction, backed with equipment planning and deployment, duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion should be furnished by the successful tenderer at the time of agreement.

The Agency shall comply with ISO14001 (Environmental Management System) requirement during execution of work.

The star rates in respect of specified materials (Cement, Steel and Bitumen) shall be payable as per GO No: FD/3/PCL/2008 Bangalore Dated 21.11.2008

In Exercise of the power conferred under section 21of the General Clauses Act 1897, the Circular No. LAW 273 LAC 2012 (p), Dated 10-01-2014, regarding incorporation of ARBITRAY CLAUSE in the Government Contract/ tenders etc., is hereby withdrawn with immediate effect vide Government Circular:LAW-LAC/198/2024, Bangalore, Dated:16-11-2024

All items SI unit to be read/followed as per Common SR Particular

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Capabilities of Vendor

As per Clause 3.2(b) : To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22,2022-23, 2023-24 2024-25 & 2025-26 (b) satisfactorily completed (at least 50% of the contract value) as prime contractor, at least one similar work such of value not less than Rs.33.32 Lakhs

Work Done Certificate

Copy of Registration

PWD Registration Certificate (Class I/II/III/IV)

List of works for which tenders already submitted

Others -- List of works for which tenders already submitted

List of existing commitments and ongoing works

Others -- List of existing commitments and ongoing works

Cost of work for which Tender acceptance letters received

Others -- Cost of work for which Tender acceptance letters received

Principal Placeof Business

Others -- Principal Placeof Business

Cost of existing commitments and ongoing works

Others -- Cost of existing commitments and ongoing works

Litigation in which the Tenderer is involved.

Others -- Litigation in which the Tenderer is involved.

As per Clause 3.2(c) To qualify for award of this contract, each Tenderer in its Name should have in the last five years i.e., 2021-22, 2022-23, 2023-24 2024-25 & 2025-26 (c)executed in any one year, the following minimum quantities of work (a)Earthwork/ EMB/ Sub grade & shoulders-149.31 Cum (b) PCC/RCC/PAVEMENTS 89.05 Cum c)Steel 9.44 Tonne d) BBM 44.46 Cum e) Plastering 806.74 Sqm f) Flooring 222.77 Sqm g) Painting 1584.70 Sqm h) MS Grills Steel Doors Etc 1617.34 Kg i) Doors and Windows 12.14 Sqm

Work Done Certificate

Financial Status

As per Clause 3.2(a): To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2021-22, 2022-23, 2023-24 2024-25 & 2025-26 (a) achieved in at least One financial years a minimum financial turn over (in all classes of civil engineering construction works only) of Rs. 66.63 Lakhs. (usually not less than One times the estimated annual payments under this contract)

Audited CA Certificate of Annual Turnover

As per Clause 3.3(c) : To qualify for award of this contract, Each Tenderer should further demonstrate: Liquid assets and /or availability of credit facilities of not less than Rs.33.32 Lakhs.(Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. (usually the equivalent of the estimated cash flow for three months in the peak construction period)

Line of Credit

Fee & Financial Details

Tender Fee Amount

₹1,670

EMD Fee Amount

₹1.3 L

Important Dates

Last Activity

12 Nov 2026

Published

12 Nov 2026

Bid Opening

20 Nov 2026

Download Ends

16 Nov 2026

BOQ Preview

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer ...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, tr...

•

Providing Brick work with common burnt clay modular bricks of clasS designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement

•

: 6 coarse sand) including cost of all material...

•

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement ...

•

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removi...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffoldin...

•

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off c...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

•

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement conc...

•

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Su...

•

Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer Numeric Control) routed of approved design by Engineer-inc...

•

Providing and fixing bright finished brass butt hinges with necessary screws

•

etc. complete : 100x85x5.5 mm (heavy type)

•

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Bar- rel type) with necessary screws etc. complete :

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 300mm

•

Providing and fixing chromium plated brass handles of 100/125 mm with

•

necessary screws etc. complete

•

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

•

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete

•

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...

•

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of ap- proved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and ...

•

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pip...

•

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, w...

•

Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making goo...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural ...

•

Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc complete as per directions of Engineer- in-charge

•

Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery)...

•

Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above...

•

Providing and fixing in position fully panelled Honne wood shutters for

•

doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm

•

wide top rail and stiles 100mm wide as per drawing a...

•

Providing and laying flamed finish Granite stone flooring in required design

•

and patterns, in linear as well as curvilinear portions of the building all

•

complete as per the architectural drawings with...

•

Wall painting with premium acrylic emulsion paint of interior grade,

•

having VOC (Volatile Organic Compound ) content less than 50 g/L of

•

approved brand and manufacture, including applying additional c...

•

Providing and fixing 18 mm thick gang saw cut granite of any color and

•

shade, mirror polished, premoulded and prepolished, machine cut for

•

kitchen platforms, vanity counters, window sills, facias and ...

•

Stone tile (polished) of 8mm thickness granite stone of any color and

•

shade work for wall lining over 12 mm thick bed of cement mortar 1:3 (1

•

cement : 3 coarse sand) and cement slurry @ 3.3 kg/m2 incl...

•

Supplying of 1440rpm heavy duty exhaust fan with bracket blades

•

suitable to operate on 230V 50Hz, AC Supply complete.

•

Concealed Conduit Pipes

•

Supplying heavy gauge PVC conduit pipe . dia . mm thick

•

confirming to IS 2509 with suitable size bends, junction boxes,

•

adhesive paste etc , and fixing using inverted wood plugs in case of

•

Supplying heavy gauge PVC conduit pipe . dia . mm thick

•

confirming to IS 2509 with suitable size bends, junction boxes,

•

adhesive paste etc , and fixing using inverted wood plugs in case of

•

3 Supplying heavy gauge PVC Conduit Pipe . dia . mm thick

•

with suitable size bends, metal junction boxes adhesive paste etc., by

•

groove cutting in the wall and fixing by bracing U or J hooks and

•

3 Supplying heavy gauge PVC Conduit Pipe . dia . mm thick

•

with suitable size bends, metal junction boxes adhesive paste etc., by

•

groove cutting in the wall and fixing by bracing U or J hooks and

•

Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box

•

Supplying and flush mounting powder coated / galvanized metal box

•

suitable for mounting modular switch plates. The box should be firmly

•

flush mounted after due groove cutting in Brick/Stone/C.C wall 6...

•

Supplying and flush mounting powder coated / galvanized metal box

•

suitable for mounting modular switch plates. The box should be firmly

•

flush mounted after due groove cutting in Brick/Stone/C.C wall

•

Supplying and flush mounting powder coated / galvanized metal box

•

suitable for mounting modular switch plates. The box should be firmly

•

flush mounted after due groove cutting in Brick/Stone/C.C wall

•

Supplying and flush mounting powder coated / galvanized metal box

•

suitable for mounting modular switch plates. The box should be firmly

•

flush mounted after due groove cutting in Brick/Stone/C.C wall

•

Supplying and fixing superior quality modular switch mounting

•

polycarbonate plate with necessary supporting back plate with required

•

nos. of machine screws, bolts nuts etc., complete on the existing

•

Supplying and fixing superior quality modular switch mounting

•

polycarbonate plate with necessary supporting back plate with required

•

nos. of machine screws, bolts nuts etc., complete on the existing

•

Supplying and fixing superior quality modular switch mounting

•

polycarbonate plate with necessary supporting back plate with required

•

nos. of machine screws, bolts nuts etc., complete on the existing

•

Supplying and fixing superior quality modular switch mounting

•

polycarbonate plate with necessary supporting back plate with required

•

nos. of machine screws, bolts nuts etc., complete on the existing

•

Extra for Groove cutting in brick wall/CC floor to the suitable depth

•

for concealing of Conduit/GI pipe and plastering, finishing upto

•

wall surface complete.upto 50 mm conduit in brick wall

•

Supplying And Fixing Metal Fan Box with Round Hook

•

Supplying and wiring adopting loop system in existing PVC Conduit

•

/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral)

•

& 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated

•

Supplying and wiring adopting loop system in existing PVC Conduit

•

/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral)

•

& 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated

•

Wiring for lighting/power circuit using one of FRLS PVC insulated

•

1100V grade, multistrand copper wire with low conductor resistance

•

single core in open or concealed system of wiring with specified IS...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated

•

1100V grade, multistrand copper wire with low conductor resistance

•

single core in open or concealed system of wiring with specified IS...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated

•

1100V grade, multistrand copper wire with low conductor resistance

•

single core in open or concealed system of wiring with specified IS...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated

•

1100V grade, multistrand copper wire with low conductor resistance

•

single core in open or concealed system of wiring with specified IS...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated

•

1100V grade, multistrand copper wire with low conductor resistance

•

single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing of modular switch & connected accessories on

•

existing modular switch plate as per IS 3854 and IS 1293 6 A One Way Switch

•

Supplying and fixing of modular switch & connected accessories on

•

existing modular switch plate as per IS 3854 and IS 1293 6 A Two Way Switch

•

Supplying and fixing of modular switch & connected accessories on

•

existing modular switch plate as per IS 3854 and IS 1293 6 A Three Way Socket

•

Supplying and fixing of modular switch & connected accessories on

•

existing modular switch plate as per IS 3854 and IS 1293 Stepped Fan Regualator Two Module

•

Supplying and fixing of modular switch & connected accessories on

•

existing modular switch plate as per IS 3854 and IS 1293 TV/ Telephone Socket

•

Supplying and fixing of modular switch & connected accessories on

•

existing modular switch plate as per IS 3854 and IS 1293 16 A One Way Switch

•

Supplying and fixing of modular switch & connected accessories on

•

existing modular switch plate as per IS 3854 and IS 1293 6/16 A Universal Socket

•

Supplying And fixing/replacing of 6/16/32A electrical

•

accessories on existing switch board.6A Bakelite Ceiling Rose

•

Supplying And fixing/replacing of 6/16/32A electrical

•

accessories on existing switch board.6A Pendant Holder

•

Supplying And fixing/replacing of 6/16/32A electrical

•

accessories on existing switch board.6A Batten Holder

•

Supplying of .feet -PVC Batten with integrated LED tube . W

•

with high quality diffuser with Life of 25000 burning hours & 70%

•

lumen maintenance with CRI 80. Power Input: 220-240V@

•

50/60Hz & Power fact...

•

Supply of round/square recess/surface mounted rolling type

•

LED Down light with . W GU 10 LED Lamp Rib Fabricated

•

from diecast aluminium with white powder coated prewired to

•

mains connector & has swive...

•

Supplying of Ceiling Fan with Capacitor rating As per guideline of

•

BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984

•

with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto...

•

Fixing all types and all capacities of fluorescent /false ceiling / spot

•

light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders

•

using 23/0.0076" twin twisted PVC insulated wires, r...

•

Fixing a ceiling /wall mounting fan of all capacities and all types,

•

with necessary clamps and 'S' hook made out of 15mm dia MS rod,

•

with 5 A. ceiling rose of approved quality with necessary length of...

•

Fixing one exhaust fan after making a suitable notch in the wall and

•

finishing with cement mortar and colouring to match the existing wall

•

or brackets, with bolts and nuts and a 5 A, ceiling rose with...

•

Supplying and fixing regular MCB distribution boards on wall/ood

•

board / flush mounting using required clamps, bolts, nuts etc., with

•

provision for fixing suitable type capacity MCB's single phase/3

•

Supplying & fixing miniature circuit breakers on existing MCB

•

distribution boards using necessary fixing materials and 'C' Type

•

curve, indicator ON/OFF, energy cross-3 with Short circuit breaking

•

Supplying & fixing miniature circuit breakers on existing MCB

•

distribution boards using necessary fixing materials and 'C' Type

•

curve, indicator ON/OFF, energy cross-3 with Short circuit breaking

•

Supplying & fixing miniature circuit breakers on existing MCB

•

distribution boards using necessary fixing materials and 'C' Type

•

curve, indicator ON/OFF, energy cross-3 with Short circuit breaking

•

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the

•

existing wood/panel board using necessary screws, bolts, nuts,

•

necessary phase separators, handle and wiring complete. Protection of

•

Supplying of multi function digital meter with three line back light

•

LCD type display for voltage, Current, frequency, Power, power

•

factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network

•

Supplying and fixing Electronic Trivector Meter (ETV)

•

suitable for operation LT operation and -CT operated meter in

•

polycarbonate body in class 0.5 accuracy as per IS 14697 and

•

completely wired.

•

Supplying & fixing of Porcelain fuse channel with cut out on

•

existing wooden/panel using necessary nuts, bolts and washers.200 A

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C.

•

cutouts and other equipment's on the meter board using 40 mm dia

•

2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

•

Supplying, erecting, testing & commissioning of ON-LINE UPS

•

system suitable for operation on 230V, 50Hz, A/C supply, with

•

isolation transformer all accessories complete and Excluding batteries

•

Supplying, installation, testing & commissioning of 12V DC, AH

•

batteries in poly propylene container for U.P.S. Sealed maintenance

•

free batteries 200AH capacity

•

WATER SUPPLY WORK (GROUND FLOOR)

•

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts,

•

collar and bush of approved quality and colour. - 15 mm nominal bore with 450 mm length

•

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

•

Providing and fixing P.V.C. waste pipe for sink or wash basin including

•

P.V.C. waste fittings complete. Semi rigid pipe : 32 mm dia

•

Providing and fixing C.P. brass long body bib cock of approved quality

•

conforming to IS standards and weighing not less than 690 g.

•

Providing and fixing C.P. brass angle valve for basin mixer and geyser

•

points of approved quality conforming to IS:8931

•

Providing and fixing PTMT grating of approved quality and colour. - Rectangular type with openable circular lid

•

Providing and fixing gun metal non- return valve of approved quality

•

(screwed end) : 25 mm nominal bore - Horizontal

•

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quali...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

•

Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. 2 HP, Size 50x40 Head 22M, Discharge 186 LPM

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includ...

•

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

•

Providing and laying in position Cement Concrete for all Super structures of

•

building , Road works, Water works, Irrigation works & super structure works

•

of bridges upto 3.50 m height. The granite/tra...

•

Providing and laying in position Cement Concrete for all Super structures of

•

building , Road works, Water works, Irrigation works & super structure works

•

of bridges upto 3.50 m height. The granite/tra...

•

Providing and laying in position Cement Concrete for all Super structures of

•

building , Road works, Water works, Irrigation works & super structure works

•

of bridges upto 3.50 m height. The granite/tra...

•

Steel Fabrication.Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

•

including cost of all materials, machinery, labour, cleaning, straightening,

•

cutting, bending, hooking, laping/we...

•

Providing Brick work with common burnt clay modular bricks of class

•

designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement

•

: 6 coarse sand) including cost of all materials, labour, sc...

•

Providing Half brick masonry with common burnt clay Non Modular

•

bricks of class designation 3.5 in superstructure above plinth level up

•

to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) inc...

•

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3

•

fine sand) on concrete surface / ceilings including rounding off corners

•

wherever required smooth rendering, providing and removing s...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:

•

4 fine sand) to brick masonry including rounding off corners wherever

•

required smooth rendering, providing and removing scaffolding, in...

•

Providing 15 mm cement plaster on rough side of single or half brick

•

wall finished with a floating coat of neat cement of mix: 1:4 (1 cement:

•

4 fine sand) to brick masonry including rounding off corne...

•

Providing and fixing M.S. grills of required pattern in frames of windows

•

etc. with M.S. flats, square or round bars etc. including priming coat with

•

approved steel primer all complete. Fixed to openi...

•

Providing Salwood frames of doors, windows, clerestory windows,

•

ventilators and other frames, wrought, framed or assembled including

•

making plaster groves (excluding cost of cement concrete and side c...

•

Providing and fixing in position fully panelled Mathi/Nandi wood shutters

•

for doors with stiles and rails of 40mm. thick with bottom and lock rails

•

180mm wide top rail and stiles 100mm wide as per dra...

•

Providing and fixing factory made single extruded WPC (Wood Polymer

•

Composite) solid door/window/Clerestory windows & other Frames/

•

Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...

•

Providing and fixing factory made 18 mm thick single extruded WPC (Wood

•

Polymer Composite) solid plain white colour board Jali, CNC (Computer

•

Numeric Control) routed of approved design by Engineer-inc...

•

Providing and fixing bright finished brass butt hinges with necessary screws

•

etc. complete :100x85x5.5 mm (heavy type

•

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :

•

Providing and fixing Stainless Steel Fixtures conforming to 304

•

graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm

•

Providing and fixing chromium plated brass handles of 100/125 mm with

•

necessary screws etc. complete

•

Providing and fixing chromium plated brass 100 mm mortice latch and lock

•

with 6 levers and a pair of lever handles of approved quality with necessary

•

screws etc. complete.

•

Providing and fixing 150 mm bright finished floor brass door stopper

•

with rubber cushion, necessary brass screws etc. to suit shutter thickness

•

Providing & fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in different

•

sizes with water absorption less than 0.08 % and conforming to I.S. 15622,

•

of approved make, in all colours & shade, over 12 mm...

•

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding

•

for Bathrooms: Toilet: Chemically exposed areas and jo...

•

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:

•

15622 (thickness to be specified by the manufacturer), of approved make,

•

in all colours, shades except burgundy, bottle gre...

•

Providing and applying white cement based putty of average thickness

•

1 mm, of approved brand and manufacturer, over the plastered

•

wall surface to prepare the surface even and smooth complete as per

•

Wall painting with premium acrylic emulsion paint of interior grade,

•

having VOC (Volatile Organic Compound ) content less than 50 g/L of

•

approved brand and manufacture, including applying additional c...

•

Wall painting with premium acrylic emulsion paint of interior grade,

•

having VOC (Volatile Organic Compound ) content less than 50 g/L of

•

approved brand and manufacture, including applying additional c...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New

•

work (Two coat applied @ 1.67L/10 m² over and including priming coat of

•

exterior primer applied @ 2.20 kg/10 m²) with paint ...

•

Painting with synthetic enamel paint of approved brand and

•

manufacture to give an even shade :Two coats on new work after

•

thoroughly brooming the surface to remove all dirt, dust, mortar drops

•

Providing and placing on terrace (at all floor levels) polyethylene

•

water storage tank, IS : 12701 marked, with cover and suitable locking

•

arrangement and making necessary holes for inlet, outlet and ...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan )

•

with 100 mm sand cast Iron P or S trap, 10 litre low level white

•

P.V.C. flushing cistern, including flush pipe, with manually co...

•

Providing and fixing white vitreous china pedestal type water closet

•

(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C.

•

flushing cistern, including flush pipe, with manually c...

•

Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain

•

with rubber plug, 40 mm C.P. brass waste complete, including painting

•

the fittings and brackets, cutting and making good the wall...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

•

taps, 32 mm C.P. brass waste of standard pattern, including painting of

•

fittings and brackets, cutting and making good the w...

•

Providing and fixing Steel work welded in built up sections/ framed

•

work, including cutting, hoisting, fixing in position and applying a priming

•

coat of approved steel primer using structural steel et...

•

Providing and fixing 18 mm thick gang saw cut granite of any color and

•

shade, mirror polished, premoulded and prepolished, machine cut for

•

kitchen platforms, vanity counters, window sills, facias and ...

•

Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm

•

nominal thickness of approved shade, quality and make, made from rigid

•

foam sheets (Single extruded) having density 600 kg/m3

•

Providing and fixing powder coated telescopic drawer channels 300 mm

•

long with necessary screws etc complete as per directions of Engineerin-charge

•

Providing and fixing ready made 304 grade stainless steel Modular

•

kitchen basket and accessories such as right angle basket (Plain Cup &

•

Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen ...

•

Supplying of 1440rpm heavy duty exhaust fan with bracket blades

•

suitable to operate on 230V 50Hz, AC Supply complete.12" Sweep (300 mm)

•

Providing and fixing in position 12mm thick plaster of paris (Gypsum

•

anhydrous) for ceiling reinforced with hessian cloth flat surface with

•

ceiling tiles up to a height of 5 m above floor level over a...

•

Providing and laying water proofing treatment to the Roof with PU based

•

single component elastomeric pure polyurethane based coating on New

•

terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

•

WATER SUPPLY WORK (FIRST FLOOR)

•

Supply and delivery of galvanized mild steel tubes of 6mtr standard

•

length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest

•

amendments with ISI Mark (one end fitted with Heavy Duty collar...

•

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre

•

long with S.S. triangular plate to Eureopean type W.C. of quality and make

•

as approved by Engineer - in - charge.

•

Providing and fixing P.V.C. waste pipe for sink or wash basin including

•

P.V.C. waste fittings complete.32 mm dia

•

Providing and fixing C.P. brass long body bib cock of approved quality

•

conforming to IS standards and weighing not less than 690 g.

•

Providing and fixing C.P. brass angle valve for basin mixer and geyser

•

points of approved quality conforming to IS:8931

•

Providing and fixing PTMT grating of approved quality and colour Rectangular type with openable circular lid

•

Providing and fixing gun metal non- return valve of approved quality

•

(screwed end) :Horizontal

•

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm

•

high and 112 mm distance from wall of standard shape with bracket of

•

the same materials with snap fittings of approved quality and c...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

•

having thermal stability for hot & cold water supply including all CPVC

•

plain & brass threaded fittings This includes jointing of pipe...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

•

having thermal stability for hot & cold water supply, including all CPVC

•

plain & brass threaded fittings, i/c fixing the pipe with cla...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

•

having thermal stability for hot & cold water supply, including all CPVC

•

plain & brass threaded fittings, i/c fixing the pipe with cla...

•

Providing, laying and jointing HDPE pipes of specified grade and

•

conforming to IS 4984-2016 with latest ammendments and conveying

•

to work site including loading and unloading at both destinations and

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest

•

amendments and conveying to worksite, rolling and lowering into

•

trenches, laying true to line and level and perfect linking at joint...

•

UNDER GROUND WATER TANK

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

•

Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...

•

Percentage additionalites for Formwork Cenetering and Scaffolding Addendum I P NO 111 Percentage on Finished rate of concrete per m3cum

•

Percentage additionalites for Formwork Cenetering and Scaffolding Addendum I P NO 111 Percentage on Finished rate of concrete per m3

•

Percentage additionalites for Formwork Cenetering and Scaffolding Addendum I P NO 111 Percentage on Finished rate of concrete per m3

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all m...

•

Providing Half brick masonry with common burnt clay Non Modular bricks of clasS designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materi...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 ...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...

•

Percentage additionalites for Formwork Cenetering and Scaffolding Addendum I P NO 111 Percentage on Finished rate of concrete per m3

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

30562.docx

Tender Document • 0.74 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Active

Works

Buildings

CONSTRUCTION OF FOREST OFFICER STAFF QUATRESS IN SUB ZONE AND STAFF QUATRESS FOR FOREST PATROL IN YELABURGA TALUKA

Rural Development and Panchayat Raj Department

RDPR Division Office Koppal | Koppal, Karnataka

Amount: ₹66.6 LCloses: 19 Nov 20266d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published12 Nov 2026
Closes19 Nov 2026
Bid Opening20 Nov 2026