MAINT AND OPEREAATION OF MECHANICAL LAUNDRY OILED FIRED INCINERATOR MRS DG SETS MH INCLUDING ITS REPAIRS AND MAINTENANCE AND M AND O OF WATER SUPPLY PUMP SETS DG SETS AT MH KIRKEE UNDER GE MH AND RH KIRKEE

Amount

Maintenance and Serviceing as per manufactures mannual including attending faults on call basis of Industrial type washing machine steam heated front loading open pocket heavy duty normal spin type 50 KG cap, fully automatic with all controls and Electric motors complete all as specified and directed by the Engineer-in-Charge. Make & Model - Lucky, LEW/WM/50 - 6 Nos

Maintenance and Serviceing as per manufactures mannual including attending faults on call basis of Hydro Extractor heavy duty spin type 50 KG cap, top loading type direct drive with motor of capacity 10 HP, electromagnetic DC injection break, stainless steel linker basket fully automatic with all controls and Electric motor complete all as specified and directed by the Engineer-in-Charge. Make & Model - Lucky, LEW/HE/50 - 02 Nos.

Maintenance and Serviceing as per manufactures mannual including attending faults on call basis for flat work ironer (calendering machines) having roler size 470 mm dia x 2100 mm length complete with controls and electric motor of capacity 5 HP complete all as specified and directed by the Engineer-in-Charge. Make & Model - Lucky, LEW/FWI/D - 2 Nos.

Maintenance and Serviceing as per manufactures mannual including attending faults on call basis for flat bed press , head and bed size 750 mm x 1500 mm pneumatically operated complete with all controls and blower complete all as specified and directed by the Engineer-in-Charge Make & Model - Lucky, LEW/FBP/S - 2 Nos

Maintenance and Serviceing as per manufactures mannual including attending faults on call basis for hygenic washer extractor (sluicing machine) steam heated loading cap 15 KG, Stainless steel bucket outer drum and front door complete with all controls and electrically operated fully automatic complete all as specified and directed by the Engineer-in-Charge. Make & Model - Lucky, LEW/WE/15 - 2 Nos

Maintenance and Serviceing as per manufactures mannual including attending faults on call basis for drying tumbler steam heated front loading type open pocket 50 KG cap fully automatic stainless steel liner basket, blower and motor complete all as specified and directed by the Engineer-in-Charge. Make & Model - Lucky, LEW/DT/50 - 6 Nos

Maintenance and Serviceing as per manufactures mannual including attending faults on call basis for steam boiler Model Non IBR, RXA. 04, 400 Kg /hour cap with 10.5 Kg / Sqm pressure with 200 degree C set temperature complete all as specified and directed by the Engineer-in-Charge. Make & Model - Revomax - 02 Nos.

Maintenance and Serviceing as per manufactures mannual including attending faults on call basis of water softening plant Ion Exchange type model EZ-40 on line softener with regenerative chemicals capable to soften the water upto 5-10 ppm incl pump set of 01 HP cap complete all as specified and directed by the Engineer-in-Charge. Make - ION Exchange ( 01 No)

Maintenance and Serviceing as per manufactures mannual including faults on call basis of air compressor horizontal single acting 12 Kg/Sqm with 3 phase 7.5 HP motor complete all as specified and directed by the Engineer-in-Charge. Make : Kirloskar (Model No AE-20)

Maintenance and Serviceing as per manufactures mannual including attending faults on call basis of autoclaving machine of cap 20 Kg size of chamber 16"x24" and working pressure 1.2 Kg/Sqm with all controls complete all as specified and directed by the Engineer-in-Charge. Make - Medicare Equipment Co. Model LHPS-11 - 1 Nos

Maintenance and Serviceing as per manufactures mannual including attending faults on call basis of mattress sterlizer having chamber size 42"x48"x84", sterlizing temperature 121 deg C and operating pressure 1.20 Kg/Sq cm complete all as specified and directed by the Engineer-in-Charge. Make - Medicare Equipment Co - 1 No

Maintenance and servicing including attending faults on call basis of oil fired incinerator of capacity 50 Kg/hour, heat on POF type operating on AC 440 volt , 3 phase working temperature of primary chamber upto 850 deg C and secondary chamber upto 1050 deg C comprising of main incinerator unit, elcetric control panel air , blower FD exhaust fan ID, wet scrubber , droplet seperator and chimney with ducting complete all as speciifed and directed by Engineer-in-Charge. Make : ECO - 01 Nos. Note for Item Nos 1 to 12 : The rates quoted do not include the cost of spares which shall be measured and paid for seperately under relevant items of Sch as 'Supply Only' . (ii) The rates quoted shall include the cost for testing of the system as per CPCB norms and visiting charges of CPCB team for incinerator stack emission monitoring system after servicing as directed by Engr-in-Charge and as specified in particular specifications. (iii) The rate quoted shall also include the cost of visiting charges as applicable for company's rep.

Taking out burnt electric motor from foundation, dismantling and, rewinding of motor complete wth super enamelled copper winding wire of suitable gauge as existing and varnishing, heating and testing after repair upto the entire satisfaction of Engr-in-Charge re-assembling and fixing it in its original location of capcity 0.5 to 1 HP, 3 Phase,440 Volt

All as per item No 13 above but of capacity 2 HP, 3 Phase,440 Volt

All as per item No 13 above but of capacity 5/7.5 HP, 3 Phase,440 Volt

All as per item No 13 above but of capacity 10 HP, 3 Phase,440 Volt

Repair & servicing of of boiler unit by disconnecting electric connection inlet and out let steam / water flange pipe conection ,opening of top cover of boiler unit removing wegmans core and steam coil unit , cleaning of inner surface removing scaling , detecting leak by bracing /welding after repairing and servicing re-commissioning the same including testing upto the entire satisfaction of Engineer-in - Charge.

M & L for overhauling and servicing of sususpension and break system of hydro extractor as per manufacture instructions including repair /replacement of unserviceable nut bolts ,springs, bushes all as specified and directed by Engr-in- Charge. ( Replacement of unserviceable spare parts will be measured under relevant items of schedule A)

Supply and fixing in replacement burner assembly 12.7 TL KW with induction motor of 0.37 KW ,2.6 Amps fuel injection pressure range 10 to 20 kg /hr IP 40 single phase 220 volt 50 hz all as specified and directed by Engr in Charge Make - Ecoflam or equivelant

S & F in repairs 20 mm bore MS pipe line heavy duty class 'C'with necessary flange joint and accessories like bend, tee, elbow etc including welding all as specified & directed by Engineer -in-Charge

All as per item No 20 above but of size 25 mm bore

All as per item No 20 above but of size 40 mm bore

Supply only gate valve bronze body 1/2" of size as per existing make.

Supply only nozzels as per existing size

Supply only pressure switch as per existing sample

Supply only electrode for boiler assembly as per existing sample

Supply only steam globe valve made of bronze body of size 1" as per existing make

Supply only steam globe valve made of bronze body of size 3/4" as per existing make.

Supply only photocell 8205

Supply only V-Belt B-68

Supply only V-Belt B-111

Supply only V-Belt A-92

Supply only V-Belt B-78

Supply only V-Belt A-54

Supply only safty valve for boiler assembly as per existing sample

Supply only timer star delta 415 V AC 50/60 HZ 30 Sec. Make - L&T

Supply only steam valve for boiler assembly as per existing sample

Supply only sequence controler of boiler unit 220 volt 50 Hz 8 volt rating model MA 810

Supply only phase preventer 415 Volts 50 HZ for 1 HP to 10 HP. Make - L&T or equivelant

Supply only Contactor 16 Amps 440 V. Make - L&T, C & S, Siemens.

Supply only power Contactor 32 Amps 440 V. Make - L&T, C & S, Siemens.

Supply and fixing in repair MCCB 4 pole 415 V, 250 Amps, thermal magnetic Adjustable type with breaking capacity 25 KA complete all as specified and directed by Engr-in-charge. Make : Siemens / Sncheider / L&T

Supply only push button spring rotary type as per sample

Supply only bronze thermodynamic steam trap with in built strainer. Make - Atam/Leader, Model AV-121" dia as per sample.

Supply only door knob washing machine and hydro extractor as per sample

Supply only door inspection glass for washing machine as per sample

Supply only dryer door gasket as per sample

Supply only teflon cover of flat bed press machine of size 2.5m x2.0 m m as per sample

Supply only steam hose pipe 1 mtr long 20 mm dia both end flange as per sample

Supply only bearing SKF No 22217 with HC-317 Sleeves.

Supply only nozzels, 1:25 G.P.H 60 Degree of boiler unit as per sample

Supply only filters as per exisitng 80 micron capacity

Supply only limit Switch 05 Amp 230 Volt AC

Supply only solenoid valve 230 volt AC input as per existing sample

Supply only PPM testing kit measuring range 0.2 PPM to 5 PPM

Supply and fixing in replacement triple power sprayer water injecting pump set of capacity 3 HP , maximum flow rate 2000 ltr/hr with exhaust pressure up to 28 Kg/cm2 ,900 RPM of boiler unit all as specified and directed by Engr in Charge

Outsourcing of services for operation, safeguarding & Maintenance of water supply installation, pump set, DG sets, various electrical and mechanical equipment at West Side Pump House all as specified and directed by Engr-in-Charge by employing suitably qualified and experienced pump operator (03 Nos for three shifts i.e one for each shift i.e from 0600 hrs to 1400 hrs, 1400 hrs to 2200 hrs and 2200 hrs to 0600 hrs). The installation shall be manned for 24 hours round the clock on all days including sundays and holidays. The diesel geneerating set located at pump house shall be operated by the operator in case of failure of the electric supply. The persons employed are required to operate pumps/motors, opening and closing of valves, maintaining water according to the appropriate norms by mixing chlorine gas/bleaching powder, operate the control valves/panels operating and carrying out the routine maintenance of pumps, DG sets, other equipments and keeping the installation clean. All documents related to the equipments such as log sheet, record of pumping are to be maintained as per prescribed format by the operator. The installation consist of the following :- (c) Pump coupled with motor of capacity 40 HP - 02 Nos (d) Pump coupled with motor of capacity 15 HP - 02 Nos (e) Pump coupled with motor of capacity 7.5 HP - 02 Nos (f) DG set of capacity 125 KVA - 01 Nos (g) DG set of capacity 25 KVA - 01 Nos (h) LT Panels with soft starter - 6 Nos (j) Various size of sluice valve - 20 Nos

Outsourcing of services for operation, safefgaurding & maintenance of diesel engine gerator sets, various electric and mechanical equipment at MH area including monitoring of fuel oil, lubricant level daily and attending various minor faults in dg sets all as specified and directed by the Engineer-in-Charge by employing suitably qualified & experienced DG set operator (03 Nos for three shifts(one for each shift), 0600 hrs to 1400 hrs, 1400 hrs to 2200 hrs and 2200 hrs to 0600 hrs) The installations shall be manned for 24 hours round th eclock. The person will be in possession of required working safty tools to operate the DG set / HT / LT control panels and carrying out the maintenance of the power hours equipments and keeping the installation clean. All docudment related to the equipments such as log sheet record of MSEB power supply are to be maintained as per prescribed format by the operator. The installation consist of the following :- Location : 11KV main receiving sub station at MH Kirkee. (a) DG sets 500 KVA - 04 Nos (b) ACB 800 Amps - 14 Nos (c) ACB 800 Amps Panel borads - 04 Nos (d) Synchronizing Panel - 01 No (e) Battery Bank - 01 No (f) Capacitor Bank Panel - 04 Nos (g) VCBs 11 KV, 800 Amps - 06 Nos (h) LT panel board - 05 Nos (j) Transformer 500 KVA - 04 Nos

Outsourcing of services for operation, Safeguarding & Maintenance of Diesel Engine Generating Set at MH Kirkee, various electrical and mechanical equipments including monitoring of fuel oil, lubricant level daily and attending various minor faults in DG sets and sub station, all as specified and directed by the Engineer-in-Charge by employing suitably qualified & experience electrician (03 Nos for three shifts i,e one for each shift i.e one for each shift i.e from 0600 hrs to 1400 hrs, 1400 hrs to 2200 hrs and 2200 hrs to 0600 hrs). The installations shall be manned for 24 hours round the clock. The person will be in possession of required working/safety tools to operate the DG sets / HT / LT control panels and carrying out the maintenance of the power house equipments and keeping the installation clean. All documents related to the equipments such as log sheet, record of MSEB power supply are to be maintained by the operator as per prescribed format. The installation consist of the following :- Location : 11KV main receiving sub station at MH Kirkee. (a) 1000 KVA 11/0.433 KV Transformers - 04 Nos (c) DG sets 500 KVA - 05 Nos (d) Synchronizing Panel - 01 No (e) Battery Bank - 01 No (f) Capacitor Bank Panel - 04 Nos (g) VCBs 11 KV, 800 Amps - 06 Nos (h) LT panel board - 05 Nos

Outsourcing of services for operation, Safeguarding & Maintenance of Non IBR Revomax steam boiler plants (2 Nos) comprising of 01 No air compressor, various electrical and mechnical equipments and monitoring fuel, oil, lubricant level daily all as specified and directed by Engr-in-Charge by employing suitably experienced & qualified boiler operators for two shifts (2 Nos for two shift i.e. 01 No for each shift ) duration from 0800 hrs to 1600 hrs and 1600 hrs to 2400 hrs on all working days . The person employed by the contractor shall possess necessary tools and safety precaution to operate the boiler/ control panels and carrying out the maintenance of the plant & fire fighting equipments and keeping the plant room and equipments clean. All documents related to the equipments are to be maintained by the operator as per prescribed format. Location : Loundry plant at MH kirkee. Make: Thermax of capacity 100 Kg / Hour, pressure 10.54 Kg /Sqcm using fuel.

Outsourcing of services for operation, Safeguarding & Maintenance of oil fired incinerator 01 No of capacity 50 Kg /Hour and various electrical equipment and monitoring of fuel, oil, lubricant level daily as specified and directed by the Engineer-in-Charge by employing suitably qualified incinerator operator for one shift duration from 0800hrs to 1600hrs on all working days. The person employed by the contractor shall possess necessary tools and safety precaution to operate the incinerator / control panels and carrying out the maintenance of the plant & fire fighting equipments and keeping the plant room and equipments clean. All documents related to the equipments are to be maintained as per prescribed format by the operator. Location : West side of M H Kirkee. Make : J.J Hotmax. General Notes for item No 57 to 61 :- (a) The person employed by the contractor (i.e electrician/DG set operator/pump operator having minimum ITI qualification from Govt recognised institute or minimum 5 yrs experience in the respective trade/job and shall be able to maintain all documents and read and record the readings. (b) Rate quoted by the contractor for the above items shall be deemed to be included for the expenditure of keeping general cleanliness of the area of the installations complete including cutting of grass shrubs & vegetations around the installation. (c) Protective clothing as IS and safety instructions & tools required as applicable are to be provided by the contractor and will be continuosly in use of the operator on duty. No extra payment will be made to the contractor for the same. (d) Contractor should arrange his man power in such a way that each employee should not be assigned more than one shoft of 8 hours in a single day and weekly one day off is given to each employee for which separate manpower arrangements to be made by the contractor without any extra cost to the department. (e) Any breakdown in the system shall be reported immediately to JE E/M/Engr-in-charge. (f) Daily routine maintenance should be included in the quoted rates. (g) Life insurance of employed person shall be carried out by the contractor at his own cost from any insurance company approved by IRDA. (h) The trademen shall be well conversant with preventive measures (First aid) in case of electrical accidents of the system.

Fabtech engineering