SITC of New VRF AC in place of old VRF AC Make LG in Flat No A9 at High Rise Building Honble High Court Allahabad

L.G VRF (Variable Refrigerant Flow System) :- Outdoor Units :- SITC of LG Make Modular type outdoor units, with all BLDC scroll Inverter compressor for cooling and heating application. The unit must run with two no's of inverter compressors above 16HP along with the same shall having minimum COP of 3.7 at standard condition at 100% load. All inverter capacity controlling compressors are suitable for 380~415 volts, 3 Phase, 50 Hz. Condenser Fins should have factory anticorrosive coating treatment and same treatment should have third party certification from UL/TUV under the standard Salt Spray test method of ISO21207. All ODU unit compressors should have inbuilt oil level sensors so as to ensure reliable oil return technology to further add additional safety for Compressor. The manufacturer must be an OEM of compressors and should be having its manufacturing and NABL certified testing facility in India. The Outdoor PCB should have the technology to be cooled by refrigerant. Outdoor units must not having any de-ration up to 39 deg ambient and should have wide operation range from -5°C to 53°C. The outdoor unit must have the feature of Record running parameters of last 3 minutes before failure, for fault analysis & easy and faster trouble shooting. Make:- LG, 10HP-Multi V-5 Heat Pump, Model No. JRUN100LTE5.APUNE - 1 No. 8HP-Multi V-5 Heat Pump, Model No. JRUN080LTE5.APUNE - 1 No. Indoor Units :- SITC of LG make Indoor units equipped with pre-filter, fan section with suitable static fan, multispeed motor, coil section with DX coil, outer cabinet, drain pan, insulation, pipe connections etc. of various capacities as per specifications. MAKE: LG. JRNU18 1.5 TR Multi V IDU High Wall (Wall mounted). - 4 Nos. [Including Wireless Remote Control] JRNU24 2.0 TR Multi V IDU High Wall (Wall mounted). - 4 Nos. [Including Wireless Remote Control] Including Additional Gas Charging, Interconnecting copper refrigerant piping closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications including MS slotted angle SWG support for refrigerant piping, G.I. Cable Tray, Copper Pipe Cover, U-PVC Drain Pipe with necessory Albow, Tees, Reducers etc duly insulated with 6 mm thick closed cell elastomeric nitrile rubber tubing/sheet rapping, RB Hole for Copper and Drain Pipe, Wall packing and Plaster, M.S. Cable tray support on roof and wall, Control cum transmission wiring of 2 core x 1.5 sqmm sheilded copper wire suitable between indoor and oudoor and indoor units, dismentaling of Indoor and Outdoor units as per site requirement.