Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.6 CrAccepted-AOC 5TH FLOOR DP 9 P T I BLDG SALT LAKE SALT LAKE KOLKATA WEST BENGAL 700091 | KOLKATA | KOLKATA | WEST BENGAL | 700091 | ₹1.6 Cr | L1 | Accepted-AOC Accepted |
Tender Value
Refer Docs
EMD Value
₹4.0 L
Closing Date
3 Nov 2018, 2:00 pmClosed
The SE,PWD Health Electrical Circle
KIT Annex Building, 5th FLOOR, KOLKATA 700073
Replacement of old lifts in different MCH under HEC, PWD MCH Main Bldg Lift 1 2 STM Annex lift green Bldg. lift 1 2 3 DHB Bldg front side lift at KMCH
2018_WBPWD_192270_1
WBPWD/SEHEC/NKHED/NIQ21/18-19 2nd Call
Open Tender
ELECTRICAL WORKS ORG
Item Rate
300 days
Kolkata Medical College and Hospital
Please refer Tender documents.
4 documents required · 4 mandatory
₹4.0 L
Yes
Office of The SE,PWD Health Electrical Circle
19 Jan 2021
1 Oct 2018
5 Nov 2018
2 Oct 2018
3 Nov 2018
10 Oct 2018
9 Oct 2018
Amount
(A) MCH Main Building : Lift 1&2 20 PASSENGER BED LIFT - WITH MACHINE ROOM
SITC of Automatic Lift ( as per manufacturer design & as per detailed specification below conforming to IS ) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall / floor if any etc to complete as reqd.
Make : OTIS / KONE/SCHINDLER
Type: Bed cum passenger Lift .
Load : 20Passenger/1360Kg
Control : Microprocessor based with AC variable voltage & variable frequency ( VVVF)
Machine -- Energy efficient machine, Geared/Gearless, with Machine Room.
Position of Machine Room - Directly above the lift shaft
Speed:- 1Mtrs/Sec
Floor served :- G+4
Landing: 05 (Five), all on same side
Total Rise -15.2Mtr
Operation : Microprocessor based Simplex full collective with or without attendant.
Signals : Digital car position indicator,car travels direction indicator in car & at all landing with call registration indicator. Buttons: all buttons on car & landing shall be luminous & encoded with braille
Leveling accuracy : ±5mm Micro levelling arrangement
Car inside : -1300mm(W) x 2400mm (D) x 2200mm(H)
Car Entrence : Clear opening 1200mm (W) x 2000mm (H) protected with car door.
Car Encloser : Stainless Steel Sheet (20 SWG) with hairline finish with hand rail.
Car ceiling & Lighting : Stainless steel with hairline finish with LED lighting & fan
Car Ventilation- Pressure fan with anodized aluminium grill.
Car Flooring: Decorative granite flooring (As per direcion of EIC and according to this Department's Order).
Car Door : Stainless Steel Side opening (TSPD) automatic door provided with V3F controlled door drive system
Landing Door- Stainless steel Side opening door operated synchronizing with car door.
Door Opening - Automatic power oprated door with full length Photocell assembly light curtain sensor
PROTECTIVE DEVICES & OTHER ACESSORIES
ARD- Automatic rescue device complete with dry maintenance free batteries as required. for automatic evacuation to the nearest floor in case of power failure / single phasing/others.
Overload Protection -Fully loaded with overload protection. On overloading the lift car will not start with door remaining open and give audio & display indication
Emergency lighting in car- Battery operated emergency lighting in the lift car.
Intercom system : Battery operated intercom system in Lift Car, Machine Room & Control Room
Emergency Alarm: Battery operated alarm bell system in lift car and control room
Fireman switch - Fireman switch at main landing terminal.
Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator.
Main rope/Belt - As per manufacturer's standard conforming to IS
DIMENSION OF SHAFT & POWER SUPPLY
Available Shaft Dimension 2500 mm (Wide) X 2900mm(Depth)
Pit Depth : 1500mm
Overhead : 4900 mm
Electric power supply AC 415 Volt 3phase, 50 Hz, terminated in machine room as per IS
(B) Green Building : Lift 1&2. 20 PASSENGER BED LIFT - WITH MACHINE ROOM
SITC of Automatic Lift ( as per manufacturer design & as per detailed specification below conforming to IS ) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall / floor if any etc to complete as reqd.
Make : OTIS / KONE/SCHINDLER
Type: Bed cum passenger Lift .
Load : 20Passenger/1360Kg
Control : Microprocessor based with AC variable voltage & variable frequency ( VVVF)
Machine -- Energy efficient machine, Gearless/Geared, with Machine Room.
Position of Machine Room - Directly above the lift shaft
Speed:- 1Mtrs/Sec
Floor served :- B+G+5
Landing: 07 (Seven), all on same side
Total Rise -21.6Mtr
Operation : Microprocessor based Simplex full collective with or without attendant.
Signals : Digital car position indicator,car travels direction indicator in car & at all landing with call registration indicator. Buttons: all buttons on car & landing shall be luminous & encoded with braille
Leveling accuracy : ±5mm Micro levelling arrangement
Car inside : 1300mm(W) x 2400mm (D)x 2200mm(H)
Car Entrence : Clear opening 1100mm (W) x 2000mm (H) protected with car door.
Car Encloser : Stainless Steel Sheet (20 SWG) with hairline finish with hand rail.
Car ceiling & Lighting : Stainless steel with hairline finish with LED lighting & fan
Car Ventilation- Pressure fan with anodized aluminium grill.
Car Flooring: Decorative granite flooring (As per direcion of EIC and according to this Department's Order).
Car Door : Stainless Steel centre opening (COPD) automatic door provided with V3F controlled door drive system
Landing Door- Stainless steel centre opening door operated synchronizing with car door.
Door Opening - Automatic power oprated door with full length PhotoceL assembly light curtain sensor
PROTECTIVE DEVICES & OTHER ACESSORIES
ARD- Automatic rescue device complete with dry maintenance free batteries as required. for automatic evacuation to the nearest floor in case of power failure / single phasing/others.
Overload Protection -Fully loaded with overload protection. On overloading the lift car will not start with door remaining open and give audio & display indication
Emergency lighting in car- Battery operated emergency lighting in the lift car.
Intercom system : Battery operated intercom system in Lift Car, Machine Room & Control Room
Emergency Alarm: Battery operated alarm bell system in lift car and control room
Fireman switch - Fireman switch at main landing terminal.
Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator.
Main rope/Belt - As per manufacturer's standard conforming to IS
DIMENSION OF SHAFT & POWER SUPPLY
Available Shaft Dimension 2080 mm (Wide) X 3000mm(Depth)
Pit Depth : 1500mm
Overhead : 4200 mm
Electric power supply AC 415 Volt 3phase, 50 Hz, terminated in machine room as per IS
(C) Green Building : Lift 3 20 PASSENGER BED LIFT - WITH MACHINE ROOM
SITC of Automatic Lift ( as per manufacturer design & as per detailed specification below conforming to IS ) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall / floor if any etc to complete as reqd.
Make : OTIS / KONE/SCHINDLER
Type: Bed cum passenger Lift .
Load : 20Passenger/1360Kg
Control : Microprocessor based with AC variable voltage & variable frequency ( VVVF)
Machine -- Energy efficient machine, Gearless/Geared, with Machine Room.
Position of Machine Room - Directly above the lift shaft
Speed:- 1Mtrs/Sec
Floor served :- G+4
Landing: 05 (Five), all on same side
Total Rise -14.2Mtr
Operation : Microprocessor based Simplex full collective with or without attendant.
Signals : Digital car position indicator,car travels direction indicator in car & at all landing with call registration indicator. Buttons: all buttons on car & landing shall be luminous & encoded with braille
Leveling accuracy : ±5mm Micro levelling arrangement
Car inside : -1300mm(W) x 2400mm (D)x 2200mm(H)
Car Entrence : Clear opening 1000mm (W) x 2000mm (H) protected with car door.
Car Encloser : Stainless Steel Sheet (20 SWG) with hairline finish with hand rail.
Car ceiling & Lighting : Stainless steel with hairline finish with LED lighting & fan
Car Ventilation- Pressure fan with anodized aluminium grill.
Car Flooring: Decorative granite flooring (As per direcion of EIC and according to this Department's Order).
Car Door : Stainless Steel centre opening (COPD) automatic door provided with V3F controlled door drive system
Landing Door- Stainless steel centre opening door operated synchronizing with car door.
Door Opening - Automatic power oprated door with full length PhotoceL assembly light curtain sensor
PROTECTIVE DEVICES & OTHER ACESSORIES
ARD- Automatic rescue device complete with dry maintenance free batteries as required. for automatic evacuation to the nearest floor in case of power failure / single phasing/others.
Overload Protection -Fully loaded with overload protection. On overloading the lift car will not start with door remaining open and give audio & display indication
Emergency lighting in car- Battery operated emergency lighting in the lift car.
Intercom system : Battery operated intercom system in Lift Car, Machine Room & Control Room
Emergency Alarm: Battery operated alarm bell system in lift car and control room
Fireman switch - Fireman switch at main landing terminal.
Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator.
Main rope/Belt - As per manufacturer's standard conforming to IS
DIMENSION OF SHAFT & POWER SUPPLY
Available Shaft Dimension 2500 mm (Wide) X 2900mm(Depth)
Pit Depth : 1500mm
Overhead : 4200 mm
Electric power supply AC 415 Volt 3phase, 50 Hz, terminated in machine room as per IS
(D) STM Annex Building : Lift 3, 10-PASSENGER LIFT - WITHOUT MACHINE ROOM
SITC of Automatic Lift ( as per manufacturer design & as per detailed specification below conforming to IS ) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall / floor if any etc to complete as reqd.
Make : OTIS / KONE/SCHINDLER
Type: passenger Lift .
Load : 10Passenger/680Kg
Control : Microprocessor based with AC variable voltage & variable frequency ( VVVF)
Machine -- Energy efficient machine, Gearless, with Out Machine Room. [ MRL]
Position of Machine Room - Directly above the lift shaft
Speed:- 1Mtrs/Sec
Floor served :- G+5
Landing: 06 (Six), all on same side
Total Rise -17.25Mtr
Operation : Microprocessor based simplex tull collective with or without attendant.
Signals : Digital car position indicator,car travels direction indicator in car & at all landing with call registration indicator. Buttons: all buttons on car & landing shall be luminous & encoded with braille
Leveling accuracy : ±5mm Micro levelling arrangement
Car inside : -1300mm(W) x 1350mm (D)x 2200mm(H)
Car Entrence : Clear opening 800mm (W) x 2000mm (H) protected with car door.
Car Encloser : Stainless Steel Sheet (20 SWG) with hairline finish with hand rail.
Car ceiling & Lighting : Stainless steel with hairline finish with LED lighting & fan
Car Ventilation- Pressure fan with anodized aluminium grill.
Car Flooring: Decorative granite flooring (As per direcion of EIC and according to this Department's Order).
Car Door : Stainless Steel centre opening automatic door (COPD) provided with V3F controlled door drive system
Landing Door- Stainless steel centre opening door operated synchronizing with car door.
Door Opening - Automatic power oprated door with full length PhotoceL assembly light curtain sensor
PROTECTIVE DEVICES & OTHER ACESSORIES
ARD- Automatic rescue device complete with dry maintenance free batteries as required. for automatic evacuation to the nearest floor in case of power failure / single phasing/others.
Overload Protection -Fully loaded with overload protection. On overloading the lift car will not start with door remaining open and give audio & display indication
Emergency lighting in car- Battery operated emergency lighting in the lift car.
Intercom system : Battery operated intercom system in Lift Car, Machine Room & Control Room
Emergency Alarm: Battery operated alarm bell system in lift car and control room
Fireman switch - Fireman switch at main landing terminal.
Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator.
Main rope/Belt - As per manufacturer's standard conforming to IS
DIMENSION OF SHAFT & POWER SUPPLY
Available Shaft Dimension 2050 mm (Wide) X 1650mm(Depth)
Pit Depth : 1600mm
Overhead : 4450 mm
Electric power supply AC 415 Volt 3phase, 50 Hz, terminated in machine room as per IS
(E) DHB Building : Front Side Bed cum 15passenger lift with Machine Room
SITC of Automatic Lift ( as per manufacturer design & as per detailed specification below conforming to IS ) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall / floor if any etc to complete as reqd.
Make : OTIS / KONE/SCHINDLER
Type: Bed cum passenger Lift .
Load : 15Passenger/1020Kg
Control : Microprocessor based with AC variable voltage & variable frequency ( VVVF)
Machine -- Energy efficient machine, Gearless, with Machine Room.
Position of Machine Room - Directly above the lift shaft
Speed:- 1Mtrs/Sec
Floor served :- G+3
Landing: 04 (Four), all on same side
Total Rise -13.4Mtr
Operation : Microprocessor based Simplex full collective with or without attendant.
Signals : Digital car position indicator,car travels direction indicator in car & at all landing with call registration indicator. Buttons: all buttons on car & landing shall be luminous & encoded with braille
Leveling accuracy : ±5mm Micro levelling arrangement
Car inside : -1200mm(W) x 2100mm (D)x 2200mm(H)
Car Entrence : Clear opening 900mm (W) x 2000mm (H) protected with car door.
Car Encloser : Stainless Steel Sheet (20 SWG) with hairline finish with hand rail.
Car ceiling & Lighting : Stainless steel with hairline finish with LED lighting & fan
Car Ventilation- Pressure fan with anodized aluminium grill.
Car Flooring: Decorative granite flooring (As per direcion of EIC and according to this Department's Order).
Car Door : Stainless Steel centre opening automatic door provided with V3F controlled door drive system
Landing Door- Stainless steel centre opening door operated synchronizing with car door.
Door Opening - Automatic power oprated door with full length PhotoceL assembly light curtain sensor
PROTECTIVE DEVICES & OTHER ACESSORIES
ARD- Automatic rescue device complete with dry maintenance free batteries as required. for automatic evacuation to the nearest floor in case of power failure / single phasing/others.
Overload Protection -Fully loaded with overload protection. On overloading the lift car will not start with door remaining open and give audio & display indication
Emergency lighting in car- Battery operated emergency lighting in the lift car.
Intercom system : Battery operated intercom system in Lift Car, Machine Room & Control Room
Emergency Alarm: Battery operated alarm bell system in lift car and control room
Fireman switch - Fireman switch at main landing terminal.
Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator.
Main rope/Belt - As per manufacturer's standard conforming to IS
DIMENSION OF SHAFT & POWER SUPPLY
Available Shaft Dimension 2400 mm (Wide) X 2550mm (Depth)
Pit Depth : 1300mm
Overhead : 4700 mm
Electric power supply AC 415 Volt 3phase, 50 Hz, terminated in machine room as per IS
(Rates should be Quoted inclusive of all taxes & duities and L.W.C. @ 1% as applicable)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .