Renovation of the Principal Secretary?s Chamber, Conference Hall, and External Parking Development at Krishi Bhawan, Mithapur

INFRASTURUCTURE DEVELOPMENT AUTHORITY First Floor, Udyog Bhawan, East of Gandhi Maidan, Patna

TECHNICAL BID SHEET

TENDER NUMBER 11/TEN/IDA/26 DATE OF ISSUE OF TENDER 11.05.2026

NAME OF WORK Renovation Work of Principal Secretary’s Chamber, Conference Hall, External Parking Development at Krishi Bhawan, Mithapur के कार्य COST OF WORK AS PER BOQ Rs. 24,635,200.00

BID SECURITY (EARNEST MONEY DEPOSIT) AMOUNT Rs. 493,000.00 COMPLETION PERIOD IN MONTHS 6.0

NAME OF TENDERER ALL COLOURED CELL IS TO BE FILLED ACCORDINGLY

ADDRESS, E-MAIL & MOBILE NUMBER OF TENDERER

S.N. ITEMS REQUIREMENT REMARKS

1 REGISTRATION (Any Contractor Registered in appropriate category with Central Government / Any State Government / Any Public Sector Undertakings or an Agency of National or International repute may tender but Registration with Infrastructure Development Authority will be essential after issue of Letter Of Acceptance.) Department

Registration No.

Date of Validity

2 ELECTRICAL LICENSE REGISTRATION Attach Valid Self Electrical License Or Sub Contractor's Electrical License With Affidavit (Attach An Affidavit As Per Format Prescribed In SBD-Annexure III, On Or After Date Of Tender, Duly Attested By An Executive Magistrate). Department

Registration No.

Date of Validity

3 LEGAL STATUS OF BIDDER Section 1 ITB 4.3 (a) of S.B.D (i) Individual/Partnership/Pvt. Ltd./Public Ltd/Joint Venture

(ii) Place of Registration.

(iii) Principal Place of Business

(iv) Power of Attorney of Signatory Bid

4 JOINT VENTURE (Bids From Joint Ventures Are Acceptable Only Above Rs. 10.00 Crores Project) The tenderer have to submit the Joint Venture documents as per eligibility criteria & other instructions issued vide Road Construction Department Letter No. 8131 (S) dated: 24.07.2012.

5 PERMANENT ACCOUNT NUMBER (PAN) Attach Copy of PAN

6 GST REGISTRATION Attach Copy of GST

7 COST OF BOQ (e payment only) Rs. 11,800.00 (Attach e-payment receipt of BOQ)

8 EARNEST MONEY DEPOSIT (BID SECURITY) Earnest Money Deposit (Bid Security) will be accepted only in online mode (Internet Payment Gateway). No other forms of Earnest Money Deposit (Bid Security) will be accepted. Amount To Be Entered (Rs. In Lakhs) Attach e-payment of Earnest Money Deposit (Bid Security).

9 WORK EXPERIENCE OF SIMILAR NATURE (Interior Work) Section 1 ITB 4.5 (A) (b) of SBD The completion certificate shall be issued by employer not below the rank of Executive Engineer or Equivalent.

10 QUANTITY WISE EXPERIENCE Section 1 ITB 4.5 (A) ( c ) of SBD MINIMUM QUANTITY / AMOUNT AS PRESCRIBED IN SBD (50%)

RCC+PCC : 533.15 Cum

Earth Work +Local Sand : 346.50 Cum

Electrical+HVAC Work : Rs. 964045.00

PHE Work : Rs. 38761.00

11 ANNUAL FINANCIAL TURN OVER OF LAST FIVE YEARS ITB Clause 4.5 (A)(a) (Balance Sheet, Profit & Loss And Audit Report Duly Audited By CA) FY 2020-2021 Amount To be entered (Rs in Lakhs)

FY 2021-2022 Amount To be entered (Rs in Lakhs)

FY 2022-2023 Amount To be entered (Rs in Lakhs)

FY 2023-2024 Amount To be entered (Rs in Lakhs)

FY 2024-2025 Amount To be entered (Rs in Lakhs)

12 BANKER'S CERTIFICATE EVIDENCE OF ACCESS TO OR AVAILABILITY OF CREDIT FACILITIES (10% OF PROJECT COST) Section 1 ITB 4.2 ( i ) of S.B.D Certificate Issued By Bank As Per Format Prescribed In Sec-2 Of SBD, On Or After Date Of Tender

13 BIDDING CAPACITY (BC=A*N*3-B) Section 1 ITB 4.7 of S.B.D A = Maximum value of civil engineering works executed in any one year during the last five years (updated to the price level of the year indicated in Appendix) taking into account the completed as well as works in progress. N = Number of years prescribed for completion of the works for which bids are invited. B = Value (updated to the price level of the year indicated in Appendix) of existing commitments and on-going works to be completed during the next 06 Months(period of completion of the works for which bids are invited).

14 (A) AMOUNT OF EXISTING COMMITMENTS AND ONGOING WORKS Attach As Per Sec. 2- 1.4 (A) Of SBD, On Or After Date Of Tender (Bidder must decleare themselve their all exising commitment concealment of any fact shall be sufficient cause for rejection)

(B) AMOUNT OF WORK FOR WHICH BID ALREADY SUBMITTED Attach As Per Sec 2- 1.4 (B) Of SBD, On Or After Date Of Tender

15 AFFIDAVIT (I) Attach An Affidavit As Per Format Prescribed In Sec-2 Of SBD, On Or After Date Of Tender, Duly Attested By An Executive Magistrate.

(II) Attach An Affidavit As Per NIT, On Or After Date Of Tender, Duly Attested By An Executive Magistrate.

16 CHARACTER CERTIFICATE Attach a Valid Character Certificate of Tenderer Issued By Competent Authority.

17 UNDERTAKING (i) Investment of minimum cash up to 25% of the value of the work during implementation of the contract. Section 1 ITB 4.2 (ii) of SBD (I) Attach An Undertaking As Per Format Prescribed In Sec. 2 Of SBD.

(ii) Bid Validity : 120 days Section 1 ITB 15.1 of SBD (II) Attach An Undertaking As Per Format Prescribed In Sec. 8 Of SBD.

18 LITIGATION HISTORY Section 1 ITB 4.3 ( j ) of SBD As Per Format Prescribed In Sec. 2-1.11 Of SBD On Or After Date Of Tender.

19 PROPOSED METHODOLOGY AND PROGRAMME OF CONSTRUCTION Section 1 ITB 4.3 ( l ) of S.B.D Attach Descriptions,Drawings And Charts As Necessary.

20 TECHNICAL PERSONNEL Section 1 ITB Clause 4.5 B (b) Attach As Per Sec-2-1.6 Of SBD. Attach Necessary Certificate And Current Affidavit Of Both Employee And Employer On And After Date Of Tender, Duly Attested By An Executive Magistrate.

21 LIST OF KEY PLANTS & EQUIPMENTS Section 1 ITB 4.5 B (a) Attach As Per Sec 2-1.5 Of SBD (Max. Age 5 Years). Attach Owned Voucher/Cash Memo/Invoice And Affidavit In Case Of Leased/Hire On And After Date Of Tender, Duly Attested By An Executive Magistrate.

I, the undersigned, do hereby certify that all the statements made in the required attachements are true and correct.

INFRASTRUCTURE DEVELOPMENT AUTHORITY

(A GOVERNMENT OF BIHAR UNDERTAKING)

Renovation Work of Principal Secretary’s Chamber, Conference Hall, External Parking Development at Krishi Bhawan, Mithapur के कार्य

QUOTING SHEET FOR BIDDERS

Name of Contractor

Address of Contractor

E-mail ID of Contractor Whatsapp Enabled Mobile Number

NIT - 11/TEN/IDA/26

Sl no. Description Estimated Amount Rate Quoted by Contractor

% Above/Below TOTAL QUOTED AMOUNT Rs.(In Figure) TOTAL QUOTED AMOUNT Rs.(In Words)

1 Total Schedule Amount (Rs.) 19309481

2 Total Non-Schedule Amount (Rs.) To be Quoted!

TOTAL AMOUNT Rs. 24635200

Renovation Work of Principal Secretary’s Chamber, Conference Hall, External Parking Development at Krishi Bhawan, Mithapur के कार्य

S.No. Particular Amount

1 Schedule Items 19309481

2 Non-Schedule Items

Renovation Work of Principal Secretary’s Chamber, Conference Hall, External Parking Development at Krishi Bhawan, Mithapur के कार्य

SCHEDULED ITEMS

S.No. BCD SOR-22 DESCRIPTION OF ITEMS Unit Quantity Rate Amount

Civil Work (Schedule Items)

1 15.23 Dismantling tile work in floors and roofs laind in cement mortar including stacking material within 50 metres lead.

15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 120 30.7

2 15.2 Demolishing cement concrete including disposal of material within 50 metre lead:

15.2.2 1:4:8 or leaner mix Cum 5 599.8

0.9 Demolishing brick work including stacking of serviceable material and disposal of unserviceable materials within 50 metres lead :

15.7.4 In cement mortar cum 35 823.7

15.3 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material withing 50 metres lead: Cum 2 1411.2

15.57 Dismentling aluminium gypsum partion door window glazing window Sqm 300 23.7

15.12 Desmantiling doors windows and clerestory windows (steel or wood) shutters including chowkhats, architrage, holdfasts etc. complete and stacking within 50 metres lead:

15.12.1 Of area 3 sqm and below Each 8 151.8

15.56 Dismantling old plaster or skirting raking out jounts and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. Sqm 150 21.7

15.6 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Cum 0.0 219.3

6.18.4A+ 6.19A Half brick masonry with bricks of class designation 100A in foundations and plinth in :Cement mortar 1:4 (1 cement: 4 coarse send)

Extra for half Brick masonry in superstructure above pinth level upto floor V level sqm 50 689

13.11 12mm cement plaster of mix:

13.11.4 1:6(1 cement: 6 coarse sand) sqm 150 141.5

13.80 A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sqm 300 105.4

13.92 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:

13.92.1 Two or more coats on new work sqm 300 86.4

13.81 Applying priming coat:

13.81.1 With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) sqm 50 39.7

13.94 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

13.94.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. sqm 90 116.5

13.116A Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.

4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this drybsurface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) sqm 800 786.9

11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.

11.46.2 Size of Tile 600 x 600 mm. sqm 152 1191.8

11.41A Providing and laying Vitrified tiles in floor in different sizes {thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

11.41A.3.1 Glazed Vitrified tiles Matt/ Antiskid / Unpolished finish of size 600 x 600 mm sqm 98 1054.3

8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (Granite will be mirror polished or Lappato finish as per specified by engineer incharge/ Architect)

8.2.2 Granite of any colour and shade

8.2.2.2 Area of slab over 0.50 sqm sqm 75 4401.2

8.4 Extra for fixing marble/granite stone over and above coresponding basic ite, in facia and drops of width upto 150 mm with expoxy resin based (Araldite or equivalent) adhesive including cleaning etc. complete. m 15 279.4

9.74 Providing and fixing bright finished brass tower bolt (barrel type) with necessary screws etc. complete.

9.82 Providing and fixing bright finished brass hangging type floor door stoper with necessary screws etc. complete. Each 6 108.1

9.83 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS-3564, embossed on the body, door weight upto 35 kg and door width upto 700mm), with necessary accessories and screws etc. complete. Each 11 979.5

21.18 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately) sqm 50 5143

0.9 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete asper the direction of Engineer-in-charge.

21.4.1 With stainless steel cover plate minimum 1.25 mm thickness Each 4 2283

12.45.3 Providing and fixing false ceiling at all height including providing and fixing of frame work made up of special sections power pressed from M.S. sheet and galvanized in accordance with zinc coating of 120 gms/sqm as per IS:277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm at 1200 mm centre to centre one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts to the angle hanger of 25x25x5 mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having clips of 10.5 mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connection clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5 mm thick 27 mm high having flanges of

20 mm and 30 mm long, the perimeter of ceiling fixed to wall/ partition with the help of rawl plugs at 450 mm centre to centre with 25 mm long drive-all screws @230 mm interval including jointing and fixing to a flush finish of tapered and square edges of the gypsum board with recommended filler, paper tapes, finishers and two coats of primer suitable for gypsum board as per manufacturers specification and also including the coat of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per the drawing and specification and direction of the the Engineer-in-charge but excluding the cost of painting.

12.5 mm thick tapered edge gypsum moisture resistant board Sqm 180 993

12.62 Extra for any sunk or raised moulding in the plaster of paris (Gypsum anhydrous ) ceilng .All complete as per specification and direction of E/I. Sqm 180 283

26.27 Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture,design and pattern. The tiles should have Humidity Resistance (RH) of 99%,Light Reflectance≥85%,Thermal Conductivity k=0.057 w/m K,Fire Performance as per (BS 476 pt-6 & 7)in true horizontal level suspended on interlocking T- Grid of hot dipped all round galvanised iron section of 0.33mm thick(galvanized @120gsm)comprising of main T runners of 15x32mm of length 3000mm,cross T of size15x32mm of length 1200mm and secondary intermediate cross T of size 15x32mm of length600mm to form grid module of size 600x600mm suspended from ceiling using galvanized mild steel item(galvanised @80gsm) 50mm long 8mm outer diameter M-6 dash fasteners,6mm diameter fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm,spaced at 1200mm centre to centre along main 'T'. The system should rest on periphery walls/partitions with the help of GI perimeter wall angle of size 24x24x3000mm made of 0.40 mm thick sheet, to be fixed to the wall with the help of plastic rawl plug at 450mm centre to centre & 40mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint,for all heights. The work shall be carried out as per specifications,drawings and as per directions of the engineer-in-charge.

26.27.2 With 20mm thick beveled tegular mineral fibre false ceiling tile (NRC0.7). Sqm. 110 2120.7

9.1 Providing wood work in frames of doors, windows, clerestroy windows and other frames, wrought framed and fixed in position:

9.1.1 Second class teak wood cum 1.3 120526.6

9.21 Providing and fixing ISI marked flush door shuttersconfirming to IS: 2202(Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. sqm 12 1775.3

0.000 Providing&Fixing decorativehighpressure laminated sheetof plain/wood grainingloss/matt /suede finish with high density protective surface layeandreversesideofadhesivebondingqualityconformingtoIS:2046Type S, including cost of adhesive of approved quality.

9.127.2 1.0 mm thick sqm 140 669

9.48 Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. all comlete.

9.48.1 Fixed to steel windows by welding. Kg 3660 144.5

0.0 Providing& fixing inpositionPhenol bondedBamboowood flooring with planks of sizes 14mm thick, minimum 1800mm length and minimum100mmwide, inapprovedcolour, textureandfinish,having PerformanceAppraisalCertificate(PAC) issuedbyBuildingMaterials& TechnologyPromotionCouncil (BMTPC). The flooringshall be fixed withtongueandgrooveinterlockingsystem,withunderlaymentof4mm thickexpandedpolythylenefoamsheetshavingdensity40kg/cum,over preparedsurfacewithnecessaryquarterroundplanksofsize1900mmx18mmanddoorreducerofsize1900mmx44mm,whereverrequired. Thebomboowoodplanksshallhaveminimumdensityof1000Kg/cum &minimumHardness 1000Kgf. withEco friendlyUV coating, all complete as per direction of the Engineer in-charge. sqm 210 5263

18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

a 18.7.4 32 mm Nominal outer dia pipes Metre 10 395.2

b 18.7.5 40 mm Nominal outer dia pipes Metre 10 538.4

c 18.7.6 50 mm Nominal outer dia pipes Metre 10 791

18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the

a 18.8.3 25 mm Nominal outer dia pipes Metre 40 463.1

b 18.8.4 32 mm Nominal outer dia pipes Metre 40 549.8

17.4 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required

17.4.2 Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern Each 2 5733.3

17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require

17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Each 3 2764.4

2.1 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift upto 1.5 m disposed soil to be leveled and neatly dressed

2.1.1 All Kinds of soi 100 sq 2900 4611.7

2.28 Supplying and Filling in plinth with local sand and under floors including watering, ramming consolidating and dressing complete. cum 693.2 287.3

4.1 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth leve

4.1.1 1:1:2 ( 1 cement: 1 coarse sand:2 graded stone aggregate 20 mm nominal size) cum 1034.25 5687

4.3 Centring and shuttering including strutting,propping etc. and removal or form work for

4.3.1 Foundations,footings, bases Columns sqm 500 211.1

0.9 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level

5.1.1 1:1:2 (1 cement:1 coarse sand:2 graded stone aggregate 20mm nominal size) cum 22.05 5961.9

5.2 Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement.

5.2.1 1:1:2 (1 cement: 1 coarse sand: 2 graded stone aggregate 20 mm nominal size cum 10 6943.5

5.22 Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete.

a 5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia Kg 500 94.5

b 5.22.7C Thermo-Mechanically Treated bars TMTC-500-12mm dia Kg 5000 90.8

6.1A Brick work with bricks of class designation 100A in foundations and plinth in

6.1.14A Cement mortar 1:6 (1 cement: 6 coarse sand ) cum 58.75 4819.9

6.3A Extra for Brick work in superstructure above plinth level upto floor V cum cum 842.2

11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l sqm 2900 283.3

11.77 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charg sqm 573 721.1

13.11 Cement plaster in course sand 12 mm cement plaster of mix:

13.11.2 1:4(1 cement :4 coarse sand sqm 405.57 152.9

13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :

13.46.1 New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) sqm 1000 137

13.78 Applying one coat of cement primer of approved brand and manufacture on wall surface:

13.78.1 Cement primer sqm 1305 38.6

14.83 Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. sqm 1244 1.5

16.47 Painting runway/taxi track/apron marking with adequate nos of coatsto give uniform finish with road marking paint of superior make asapproved by the Engineer-in-charge, i/c cleaning the surface of ail dirt, scales, oil, grease and other foreign mater;al etc. and lining out complete.

New work (Two or more coats sqm 646 110.6

18.12 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc

a 18.12.4 32 mm dia nominal bore Mtr 150 381.7

b 18.12.5 40 mm dia nominal bore Mtr 90 476.1

12.1 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

12.1.1 1.00 mm thick with zinc coating not less than 275 gm/mz sqm 75 1792.3

10.16 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

10.16.1 Hot finished welded type tubes Kg 600 123.9

Carriage of Materials with loading & unloading:-

Bricks 100A(local lead 1K+7P) ‰ No. 103788 1140.58896

Coarse sand lead of 45K.M.(1K+44 P) from Koilwar cum 457.01 1550.08

Stone chips lead of 110K.M.(1K+109 P) from Manpur (Gaya) cum 897.85 1427.28

Local Sand ( Lead local 1K+2P) cum 1083.3 310.469152

Steel lead of 5km (p) mt 4.295 518.0896

Cement lead of 5 km(P) mt 647.311 518.0896

Difference Cost of materials :-

Bricks 100A ‰ No. 1606.8860024

Cement(PSC) mt 265.41

Add 5.357 % GST on SOR Item as per BCD

Civil Work (SUB TOTAL) (A)=

Electrical Work (Schedule Items)

S.H. I : WIRING

1.3.3 Point wiring in PVC conduit, with modular type switch: Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable G.I. box etc. as required.

Group C Point 78 1146

1.7 Circuit / sub main wiring in PVC conduit : Wiring for circuit / submain wiring alongwith earthwire with the following sizes of PVC insulated copper conductor, singlre core cable in surface / recessed PVC conduit as required.

(a) 1.7.1 2 x 1.5 sq.mm. + 1 x 1.5 sq. mm earth wire Mtr. 0 201

(b) 1.7.2 2 x 2.5 sq.mm. + 1 x 2.5 sq. mm earth wire Mtr. 450 246

(c) 1.7.3 2 x 4 sq.mm. + 1 x 4 sq. mm earth wire Mtr. 250 309

(d ) 1.7.11 4x 6 sq.mm. + 1 x 6 sq. mm earth wire Mtr. 0 660

1.16 Telephone wiring in existing conduit: Supplying and drawing following pair, 0.5 sq. mm FR PVC insulated copper conductor, unarmoured telephone cables in existing surface / recessed PVC conduit as required

1.21 S/F PVC conduit: Supplying and fixing of following sizes of PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recess conduit as required.

1.24 S/F modular type switch/ socket : Supplying and fixing following modular type switch / socket on the existing modular switch/ socketon the existing modular plate& switch box including connections but excluding modular plate etc. as required.

(a) 1.24.1 5/6amp switch Each 10 82

(b) 1.24.3 16amp switch Each 0 139

(c) 1.24.4 3 pin, 5/6 amps socket outlet Each 10 112

(d) 1.24.5 6 pin, 15/16 amps socket outlet Each 0 183

[e] 1.24.6 Telephone socket outlet Each 8 131

(f) 1.24.8 Bell Push Each 2 122

1.27 Supplying and fixing following size/ modules, Gl/PVC box along with modular base and cover plate for modular switches in recess etc as required.

a 1.27.1 1 or 2 Module (75mm X 75mm) Each 18 234

1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. Each 25 414

1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/ 16 amps moduler socket outlet & 15/16A modular type switch connection etc. as required. Each 10 531

8.19 Supply and installation of 400 mm, 230 V A.C. wall/cabin fan including fixing the bracket, making connection, testing, commissioning etc as required (Make- Usha, Crompton, Havells or approved equivalent as per approval of EIC) Each 18 3670

1.53 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required. Each 1 683

1.58.1 Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed PVC conduit as required.

a 1 run of cable Mtr. 250 52

1.33 Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. Each 64

1.34 Supplying and fixing batten/ angle holder including connection etc. as required. Each 0 80

S.H. II : FITTINGS & ACCESSORIES

5.2 Supplying and fixing 2'X9 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. Each 2 492

5.7 Supplying and fixing recess mounted following types LED downlighter with minimum efficacy 100 Im/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

a 5.7.1 5/7 watt Each 0 926

b 5.7.4 15 watt Each 40 1352

5.9 Supplying and fixing recess mounted 36 watt LED flat panel (2' X 2') with minimum efficacy 100 lm/w which privides soft light and glare free symmetrical illumination suitable for armstrong/grid ceiling and integrated electronic driver etc directly on false ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. Each 40 2663

5.11 Supplying and fixing decorative wall mounted light bracket/ fixture made with polycarbonate suitable for single 9/10 watt LED lamp directly on wall including connections etc as required. ( But without lamp ) Note- Design should get approved from EIC Each 20 1340

6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required.

a 6.1.4 9/10 watt LED lamp Each 20 161

1.37 Providing and fixing Ding Dong call Bell suitable for single phase, 230 volts complete as required. Each 2 240

8.18 Supply and fixing of following sweep/ sizes PVC/ABS/Metal square body Exhaust Fan with automatic openable louvre shutter in existing opening including making connection, testing etc as required.

a 8.18.2 200 mm sweep (1300/ 1400 RPM) Each 2 2074

DSR 25 39.14 Supplying, Installation, Testing and commissioning of CAT6 Copper Information Outlet (IO) with face plate of color as per site requirement, should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D. All copper Cable and Components should be from same OEM to maintain compatibility and interoperability etc. complete as required. Each 12 212

DSR 25 30.12.2 Supplying, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/ round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports, bends, transitions, reducers, end caps, collars etc as required complete in all respect in confirmation with IS : 655 and approved drawings and specifications of following sheet thickness complete as required.

30.12.2.2 Thickness 0.80 mm sheet SQMT 25 1415

DSR 25 30.19 Supplying, Fixing, installation, testing and commissioning of thermal insulated flexible duct of following sizes duly supported at regular interval as per site requirement etc. in confirmation to SMACNA/IS and as per specifications complete etc. as required.

DSR 25 30.17 Supplying, Fixing, installation, testing and commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core in confirmation to SMACNA/IS and as per specifications complete etc. as required. SQMT 25 12841

DSR 25 30.18 Supplying, Fixing, installation, testing and commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core in confirmation to SMACNA/IS and as per specifications complete etc. as required SQMT 25 8595

MP SOR 57.2 Supply, installation, testing & commissioning of L.E.D. Television (4K L.E.D. Display O.S. Webos /Android or equivalent, minimum 50 Hz refresh rate Min. 20 W speaker, Wifi/bluetooth enabled, minimum 2 HDMI & 1USB Port, i/c remote and wall/table top accessories)

MP SOR 38.14 Supply, installation testing and commissioning of High-Speed HDMI corrosion-resistant connector & braided cable, Supports Ethernet, 3D, 4K video, computers and other HDMI-enabled devices Black as required to complete the job as mentioned below :-

38.14.6 + GST 20 Metre, HDMI cord Each 3

DSR 25 39.12 Supplying, Installation, Testing and commissioning of following CAT6 Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required.

. 39.12.2 Copper Patch Cords of length 3m (10ft) Each 12 227

Electrical Work (Schedule Items) Total (B) =

Civil+ Electrical Work (Schedule Items) Total (A+B) =

Renovation Work of Principal Secretary’s Chamber, Conference Hall, External Parking Development at Krishi Bhawan, Mithapur के कार्य

S.No. MR (Items) DESCRIPTION OF ITEMS Unit Quantity Quoted Rate In Figure(Rs.) (the quoted rate should be inclusive of all Taxes/cess, Royalty, Seignorage fee, Carriage of materials, Transporation cost of all materials from sources to work site, all overheads etc. complete in all respect) Quoted Rate In Word (Rs.) (the quoted rate should be inclusive of all Taxes/cess, Royalty, Seignorage fee, Carriage of materials, Transporation cost of all materials from sources to work site, all overheads etc. complete in all respect) Quoted Amount (Rs.) (the quoted rate should be inclusive of all Taxes/cess, Royalty, Seignorage fee, Carriage of materials, Transporation cost of all materials from sources to work site, all overheads etc. complete in all respect)

Civil Work (Non-Schedule Items)

1 NS-1 Supplying fitting and fixing of Marvel /Hunter Douglas/D'decor Make Roller Blinds as per company specification and as per approved colour and sample inclusive of all taxes and royalty all complete as per specifications / approval and direction of Engineer-in-Charge. Sqm 80

NS2 Providing & Fixing of Armstrong / Equivalent Wooden false ceiling Sqm 180

N.S-3 Providing & fixing of Veneer pasting of greenply/ marino/ century mica over existing flush door all complete as per direction of I/I . sqm 15

NS-4 Providing and fixing door latch and lock with necessary screws etc. complete (best make of approved quality) Each 4

NS-5 Providing and fixing wooden door handle with necessary screws etc. complete.

NS-6 Providing and fixing of veneered panelling upto specified height over 12 mm thick WPC board of Alstone / equivalent make fitted and fixed over Aluminium frame of 25 x 25mm posts at 30 cm centres and 25 x 25mm horizontal members at approx 30 cm centers including cost of anchoring the panelling to walls properly including termite treatment as per drawing specification and direction of E/I. Sqm 300

NS-7 Providing & fixing wall wall hung w.c with UF soft close set over hinges assecerries set size 360x500x380 mm,Jaquar ,cat.no -LYS - WHT -38953BIUFSM. or equivalent & Concealed Single piece slim concealed cistern cat.no -JCS - WHT -2400WS.with Flusing Control plate cat.no -JCP -CHR -372415.all complete. specification and direction of Engineer-in-charge. Each 3

NS-8 Provding and fixing white vitreous urinal (Jaquar URS-WHT-132530) or equivalent with Aquisense Sensor concealed type flushing valve for Urinal complete set with installation box with control cock ,(jaquar CAT NO- SNR-STL-51087) etc. all complete. Each 7

NS-9 Providing and fixing counter basin size- (mm) 190x550x430 (Jaquar,CAT NO- FLS-wht-5701) or equivalent including fixing and all accessories as per manufacturers specification and direction of Engineer-in-charge. Each 3

NS-10 Provding and fixing PVC fittings all complete as/specification & directionof E/I

110 mm vent cowel Each 8

110 mm plain bend Each 8

160 mm door bend Each 8

160 mm plain bend Each 8

110 mm door bend Each 8

110 X 110 mm dia door tee Each 6

110 X 110 mm dia plain tee Each 6

160 mm dia X 45 Bend Each 2

110 mm dia X 45 Bend Each 2

160 X 110 mm dia plain - y Each 2

110 X 110 mm dia plain - y Each 2

160 mm pipe clip Each 10

110 mm pipe clip Each 10

110 X110 mm dia p-trap Each 2

40 mm elbow Each 5

40 mm plain tee Each 5

NS-11 Providing Paper holder (jaguar AKP-35753PS) or Equivalent Each 4

NS-12 Providing Towel Ring (Jaquar product No. AKP-35751P ) or equivalent Each 4

NS-13 Soap dispenser (jaguar AKP-35735P) or equivalent Each 4

NS-14 CP brass 2-way bib cock with wall flange(Kubix-F) 15mm(jaguar -KUP-35041PM) or equivalent Each 4

NS-15 110 mm dia cp jali Each 6

NS-16 Providing & Fixing angle stop cock ,15 mm dia nominal bore (Jaquar -KUP-35053PM) or equivalent Each 4

NS-17 Providing & Fixing Soap Dish Holder (Jaquar product No. AKP-CHR-35731P) Each 4

NS-18 Providing, supplying and installing 2100mm high storage cum display cabinet made of 18mm thick BWP grade ply with lower portion below 900mm height to have solid openable shutters on auto closing hinges. The balance portion upto 2100mm height to have glazed openable shutters with 12mm glass shelves Complete with handles locks etc as required. The whole unit is to be finished with veneer of approved shade and all internal arears below 900mm to be laminated with 1mm mica of approved shade. Complete with necessary handles, locks, etc as requied. Size - 2100 x 1350 x 400mm deep sqm 5.5

CONFERENCE HALL

N.S-19 (A.R) Supplying fitting and fixing Godrej /Durian/ featherlite make Confrence Table Model DWS/ 34762/SP-21 - Table Size 7350x2550x750mm---01 Nos. & Table Size 6750x600x750mm----02 Nos. Conference table & extandable in length & width. The extendable meeting adds a sense of character to conference rooms. The innovation modular design enables varius configration. An all wood conference table with minimalist look and basic functionality, ideal for meeting room & top comes with 25mm thik pre lam particle board & side panel 18mm thick prelam particle board & 2mm pvc edge banding with modesty given much needed ptimary and close interaction. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. Color-Wenge.The Product Should be Certified Company BIFMA,ISO-50001,Green Guard,AGSI,FSC & PEFC. all complete as per company's specification inclusive of taxes and royalty all complete as per specification and direction of E/I. Each 1

N.S-20 (A.R) Supplying fitting and fixing Godrej /Durian/ featherlite make Medium Back Chiar Model 70001/MB/STANDARD Size (Back Height-530xBack Width-460)mm & (Seat Depth-450xSeat Width-460)mm with Min-Max Height (420-520)mm. Nylon base chair with push back mechanism & Fix handle. Nylon base chair with push back mechanism. Back & seat cover cushion chair uphlostered in fabric & adjustable armrest locks any position. Syncro mechenism with locking system and five star chrome base with nylon casters. Seat & Back made up of 14mm thick boiling water proof plywood os ISI303. Chair rotates a full 360 degree in either direction for ease of motion. Standard on every executive with task chair & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. Back reclines at A 2-to-1 ratio to the seat. 5% post consumed recycled content & 30% total recycled content. Color-Black.The Product should be PEFC, FSC, BIFMA, Green Guard, AGSI Certified & ISO 14001,50001 all complete as per company's specification inclusive of taxes and royalty all complete as per specification and direction of E/I. Each 42

N.S-28 Supplying fitting and fixing Godrej /Durian/ featherlite make 3 Seater Sofa Model JESSE/3 - Sofa Size - (L)1760mm X (D)720mm X (H)845mm. Fine Finesse. The Jesse sofa is what contemporary style looks like. This sofa is sleek and comfortable. The sleek frame is finished in a rich polish with split panel seating. The back and seat have medium to firm cushioning for better posture. The Leg of Solid wood in glossy finished. Frame used is treated American pine wood with termite free & borer free. Soft & comfortable cushion with high density and resilient foam. Frame used is Treated american pine wood & the wood used in sofa has been 8% moisture, this prevents the wood from wrapping and bending. all wood used is termite free and borer free. Foam of sofa comfortable cushion with high density and resilent foam. all apholstry materials used in specially designed.Color-Camel/ Green. The Product Should be Certified Company BIFMA, ISO-50001,Green Guard/Green PRO, Sedex, AIOTA, IGBC, AGSI,FSC & PEFC.all complete as per company's specification inclusive of taxes and royalty all complete as per specification and direction of E/I. Each 2

N.S-29 POLKA- Material & Subtype Solid Wood - Beech Wood Table Top Material Solid Wood Leg Material Metal Finish Matte Colour & Colour Family Brown - Teak Dimension (Dia)390mm X (H)460mm Size Compact Warranty 5 Years Style Contemporary Assembly Type Knock Down Each 15

Civil Work (Non-Schedule Items) Total (C) =

INFRASTRUCTURE DEVELOPMENT AUTHORITY

(A GOVERNMENT OF BIHAR UNDERTAKING)

Renovation Work of Principal Secretary’s Chamber, Conference Hall, External Parking Development at Krishi Bhawan, Mithapur के कार्य

QUOTING SHEET FOR BIDDERS

Name of Contractor

Address of Contractor

E-mail ID of Contractor Whatsapp Enabled Mobile Number

NIT - 11/TEN/IDA/26

Sl no. Description Estimated Amount Rate Quoted by Contractor

% Above/Below TOTAL QUOTED AMOUNT Rs.(In Figure) TOTAL QUOTED AMOUNT Rs.(In Words)

1 Total Schedule Amount (Rs.) 19309481

2 Total Non-Schedule Amount (Rs.) To be Quoted!

TOTAL AMOUNT Rs. 24635200

Renovation Work of Principal Secretary’s Chamber, Conference Hall, External Parking Development at Krishi Bhawan, Mithapur के कार्य

S.No. Particular Amount

1 Schedule Items 19309481

2 Non-Schedule Items

Renovation Work of Principal Secretary’s Chamber, Conference Hall, External Parking Development at Krishi Bhawan, Mithapur के कार्य

SCHEDULED ITEMS

S.No. BCD SOR-22 DESCRIPTION OF ITEMS Unit Quantity Rate Amount

Civil Work (Schedule Items)

1 15.23 Dismantling tile work in floors and roofs laind in cement mortar including stacking material within 50 metres lead.

15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 120 30.7

2 15.2 Demolishing cement concrete including disposal of material within 50 metre lead:

15.2.2 1:4:8 or leaner mix Cum 5 599.8

0.9 Demolishing brick work including stacking of serviceable material and disposal of unserviceable materials within 50 metres lead :

15.7.4 In cement mortar cum 35 823.7

15.3 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material withing 50 metres lead: Cum 2 1411.2

15.57 Dismentling aluminium gypsum partion door window glazing window Sqm 300 23.7

15.12 Desmantiling doors windows and clerestory windows (steel or wood) shutters including chowkhats, architrage, holdfasts etc. complete and stacking within 50 metres lead:

15.12.1 Of area 3 sqm and below Each 8 151.8

15.56 Dismantling old plaster or skirting raking out jounts and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. Sqm 150 21.7

15.6 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Cum 0.0 219.3

6.18.4A+ 6.19A Half brick masonry with bricks of class designation 100A in foundations and plinth in :Cement mortar 1:4 (1 cement: 4 coarse send)

Extra for half Brick masonry in superstructure above pinth level upto floor V level sqm 50 689

13.11 12mm cement plaster of mix:

13.11.4 1:6(1 cement: 6 coarse sand) sqm 150 141.5

13.80 A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sqm 300 105.4

13.92 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:

13.92.1 Two or more coats on new work sqm 300 86.4

13.81 Applying priming coat:

13.81.1 With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) sqm 50 39.7

13.94 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

13.94.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. sqm 90 116.5

13.116A Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.

4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this drybsurface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) sqm 800 786.9

11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.

11.46.2 Size of Tile 600 x 600 mm. sqm 152 1191.8

11.41A Providing and laying Vitrified tiles in floor in different sizes {thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

11.41A.3.1 Glazed Vitrified tiles Matt/ Antiskid / Unpolished finish of size 600 x 600 mm sqm 98 1054.3

8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (Granite will be mirror polished or Lappato finish as per specified by engineer incharge/ Architect)

8.2.2 Granite of any colour and shade

8.2.2.2 Area of slab over 0.50 sqm sqm 75 4401.2

8.4 Extra for fixing marble/granite stone over and above coresponding basic ite, in facia and drops of width upto 150 mm with expoxy resin based (Araldite or equivalent) adhesive including cleaning etc. complete. m 15 279.4

9.74 Providing and fixing bright finished brass tower bolt (barrel type) with necessary screws etc. complete.

9.82 Providing and fixing bright finished brass hangging type floor door stoper with necessary screws etc. complete. Each 6 108.1

9.83 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS-3564, embossed on the body, door weight upto 35 kg and door width upto 700mm), with necessary accessories and screws etc. complete. Each 11 979.5

21.18 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately) sqm 50 5143

0.9 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete asper the direction of Engineer-in-charge.

21.4.1 With stainless steel cover plate minimum 1.25 mm thickness Each 4 2283

12.45.3 Providing and fixing false ceiling at all height including providing and fixing of frame work made up of special sections power pressed from M.S. sheet and galvanized in accordance with zinc coating of 120 gms/sqm as per IS:277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm at 1200 mm centre to centre one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts to the angle hanger of 25x25x5 mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having clips of 10.5 mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connection clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5 mm thick 27 mm high having flanges of

20 mm and 30 mm long, the perimeter of ceiling fixed to wall/ partition with the help of rawl plugs at 450 mm centre to centre with 25 mm long drive-all screws @230 mm interval including jointing and fixing to a flush finish of tapered and square edges of the gypsum board with recommended filler, paper tapes, finishers and two coats of primer suitable for gypsum board as per manufacturers specification and also including the coat of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per the drawing and specification and direction of the the Engineer-in-charge but excluding the cost of painting.

12.5 mm thick tapered edge gypsum moisture resistant board Sqm 180 993

12.62 Extra for any sunk or raised moulding in the plaster of paris (Gypsum anhydrous ) ceilng .All complete as per specification and direction of E/I. Sqm 180 283

26.27 Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture,design and pattern. The tiles should have Humidity Resistance (RH) of 99%,Light Reflectance≥85%,Thermal Conductivity k=0.057 w/m K,Fire Performance as per (BS 476 pt-6 & 7)in true horizontal level suspended on interlocking T- Grid of hot dipped all round galvanised iron section of 0.33mm thick(galvanized @120gsm)comprising of main T runners of 15x32mm of length 3000mm,cross T of size15x32mm of length 1200mm and secondary intermediate cross T of size 15x32mm of length600mm to form grid module of size 600x600mm suspended from ceiling using galvanized mild steel item(galvanised @80gsm) 50mm long 8mm outer diameter M-6 dash fasteners,6mm diameter fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm,spaced at 1200mm centre to centre along main 'T'. The system should rest on periphery walls/partitions with the help of GI perimeter wall angle of size 24x24x3000mm made of 0.40 mm thick sheet, to be fixed to the wall with the help of plastic rawl plug at 450mm centre to centre & 40mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint,for all heights. The work shall be carried out as per specifications,drawings and as per directions of the engineer-in-charge.

26.27.2 With 20mm thick beveled tegular mineral fibre false ceiling tile (NRC0.7). Sqm. 110 2120.7

9.1 Providing wood work in frames of doors, windows, clerestroy windows and other frames, wrought framed and fixed in position:

9.1.1 Second class teak wood cum 1.3 120526.6

9.21 Providing and fixing ISI marked flush door shuttersconfirming to IS: 2202(Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. sqm 12 1775.3

0.000 Providing&Fixing decorativehighpressure laminated sheetof plain/wood grainingloss/matt /suede finish with high density protective surface layeandreversesideofadhesivebondingqualityconformingtoIS:2046Type S, including cost of adhesive of approved quality.

9.127.2 1.0 mm thick sqm 140 669

9.48 Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. all comlete.

9.48.1 Fixed to steel windows by welding. Kg 3660 144.5

0.0 Providing& fixing inpositionPhenol bondedBamboowood flooring with planks of sizes 14mm thick, minimum 1800mm length and minimum100mmwide, inapprovedcolour, textureandfinish,having PerformanceAppraisalCertificate(PAC) issuedbyBuildingMaterials& TechnologyPromotionCouncil (BMTPC). The flooringshall be fixed withtongueandgrooveinterlockingsystem,withunderlaymentof4mm thickexpandedpolythylenefoamsheetshavingdensity40kg/cum,over preparedsurfacewithnecessaryquarterroundplanksofsize1900mmx18mmanddoorreducerofsize1900mmx44mm,whereverrequired. Thebomboowoodplanksshallhaveminimumdensityof1000Kg/cum &minimumHardness 1000Kgf. withEco friendlyUV coating, all complete as per direction of the Engineer in-charge. sqm 210 5263

18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

a 18.7.4 32 mm Nominal outer dia pipes Metre 10 395.2

b 18.7.5 40 mm Nominal outer dia pipes Metre 10 538.4

c 18.7.6 50 mm Nominal outer dia pipes Metre 10 791

18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the

a 18.8.3 25 mm Nominal outer dia pipes Metre 40 463.1

b 18.8.4 32 mm Nominal outer dia pipes Metre 40 549.8

17.4 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required

17.4.2 Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern Each 2 5733.3

17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require

17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Each 3 2764.4

2.1 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift upto 1.5 m disposed soil to be leveled and neatly dressed

2.1.1 All Kinds of soi 100 sq 2900 4611.7

2.28 Supplying and Filling in plinth with local sand and under floors including watering, ramming consolidating and dressing complete. cum 693.2 287.3

4.1 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth leve

4.1.1 1:1:2 ( 1 cement: 1 coarse sand:2 graded stone aggregate 20 mm nominal size) cum 1034.25 5687

4.3 Centring and shuttering including strutting,propping etc. and removal or form work for

4.3.1 Foundations,footings, bases Columns sqm 500 211.1

0.9 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level

5.1.1 1:1:2 (1 cement:1 coarse sand:2 graded stone aggregate 20mm nominal size) cum 22.05 5961.9

5.2 Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement.

5.2.1 1:1:2 (1 cement: 1 coarse sand: 2 graded stone aggregate 20 mm nominal size cum 10 6943.5

5.22 Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete.

a 5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia Kg 500 94.5

b 5.22.7C Thermo-Mechanically Treated bars TMTC-500-12mm dia Kg 5000 90.8

6.1A Brick work with bricks of class designation 100A in foundations and plinth in

6.1.14A Cement mortar 1:6 (1 cement: 6 coarse sand ) cum 58.75 4819.9

6.3A Extra for Brick work in superstructure above plinth level upto floor V cum cum 842.2

11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l sqm 2900 283.3

11.77 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charg sqm 573 721.1

13.11 Cement plaster in course sand 12 mm cement plaster of mix:

13.11.2 1:4(1 cement :4 coarse sand sqm 405.57 152.9

13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :

13.46.1 New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) sqm 1000 137

13.78 Applying one coat of cement primer of approved brand and manufacture on wall surface:

13.78.1 Cement primer sqm 1305 38.6

14.83 Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. sqm 1244 1.5

16.47 Painting runway/taxi track/apron marking with adequate nos of coatsto give uniform finish with road marking paint of superior make asapproved by the Engineer-in-charge, i/c cleaning the surface of ail dirt, scales, oil, grease and other foreign mater;al etc. and lining out complete.

New work (Two or more coats sqm 646 110.6

18.12 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc

a 18.12.4 32 mm dia nominal bore Mtr 150 381.7

b 18.12.5 40 mm dia nominal bore Mtr 90 476.1

12.1 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

12.1.1 1.00 mm thick with zinc coating not less than 275 gm/mz sqm 75 1792.3

10.16 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

10.16.1 Hot finished welded type tubes Kg 600 123.9

Carriage of Materials with loading & unloading:-

Bricks 100A(local lead 1K+7P) ‰ No. 103788 1140.58896

Coarse sand lead of 45K.M.(1K+44 P) from Koilwar cum 457.01 1550.08

Stone chips lead of 110K.M.(1K+109 P) from Manpur (Gaya) cum 897.85 1427.28

Local Sand ( Lead local 1K+2P) cum 1083.3 310.469152

Steel lead of 5km (p) mt 4.295 518.0896

Cement lead of 5 km(P) mt 647.311 518.0896

Difference Cost of materials :-

Bricks 100A ‰ No. 1606.8860024

Cement(PSC) mt 265.41

Add 5.357 % GST on SOR Item as per BCD

Civil Work (SUB TOTAL) (A)=

Electrical Work (Schedule Items)

S.H. I : WIRING

1.3.3 Point wiring in PVC conduit, with modular type switch: Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable G.I. box etc. as required.

Group C Point 78 1146

1.7 Circuit / sub main wiring in PVC conduit : Wiring for circuit / submain wiring alongwith earthwire with the following sizes of PVC insulated copper conductor, singlre core cable in surface / recessed PVC conduit as required.

(a) 1.7.1 2 x 1.5 sq.mm. + 1 x 1.5 sq. mm earth wire Mtr. 0 201

(b) 1.7.2 2 x 2.5 sq.mm. + 1 x 2.5 sq. mm earth wire Mtr. 450 246

(c) 1.7.3 2 x 4 sq.mm. + 1 x 4 sq. mm earth wire Mtr. 250 309

(d ) 1.7.11 4x 6 sq.mm. + 1 x 6 sq. mm earth wire Mtr. 0 660

1.16 Telephone wiring in existing conduit: Supplying and drawing following pair, 0.5 sq. mm FR PVC insulated copper conductor, unarmoured telephone cables in existing surface / recessed PVC conduit as required

1.21 S/F PVC conduit: Supplying and fixing of following sizes of PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recess conduit as required.

1.24 S/F modular type switch/ socket : Supplying and fixing following modular type switch / socket on the existing modular switch/ socketon the existing modular plate& switch box including connections but excluding modular plate etc. as required.

(a) 1.24.1 5/6amp switch Each 10 82

(b) 1.24.3 16amp switch Each 0 139

(c) 1.24.4 3 pin, 5/6 amps socket outlet Each 10 112

(d) 1.24.5 6 pin, 15/16 amps socket outlet Each 0 183

[e] 1.24.6 Telephone socket outlet Each 8 131

(f) 1.24.8 Bell Push Each 2 122

1.27 Supplying and fixing following size/ modules, Gl/PVC box along with modular base and cover plate for modular switches in recess etc as required.

a 1.27.1 1 or 2 Module (75mm X 75mm) Each 18 234

1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. Each 25 414

1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/ 16 amps moduler socket outlet & 15/16A modular type switch connection etc. as required. Each 10 531

8.19 Supply and installation of 400 mm, 230 V A.C. wall/cabin fan including fixing the bracket, making connection, testing, commissioning etc as required (Make- Usha, Crompton, Havells or approved equivalent as per approval of EIC) Each 18 3670

1.53 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required. Each 1 683

1.58.1 Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed PVC conduit as required.

a 1 run of cable Mtr. 250 52

1.33 Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. Each 64

1.34 Supplying and fixing batten/ angle holder including connection etc. as required. Each 0 80

S.H. II : FITTINGS & ACCESSORIES

5.2 Supplying and fixing 2'X9 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. Each 2 492

5.7 Supplying and fixing recess mounted following types LED downlighter with minimum efficacy 100 Im/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

a 5.7.1 5/7 watt Each 0 926

b 5.7.4 15 watt Each 40 1352

5.9 Supplying and fixing recess mounted 36 watt LED flat panel (2' X 2') with minimum efficacy 100 lm/w which privides soft light and glare free symmetrical illumination suitable for armstrong/grid ceiling and integrated electronic driver etc directly on false ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. Each 40 2663

5.11 Supplying and fixing decorative wall mounted light bracket/ fixture made with polycarbonate suitable for single 9/10 watt LED lamp directly on wall including connections etc as required. ( But without lamp ) Note- Design should get approved from EIC Each 20 1340

6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required.

a 6.1.4 9/10 watt LED lamp Each 20 161

1.37 Providing and fixing Ding Dong call Bell suitable for single phase, 230 volts complete as required. Each 2 240

8.18 Supply and fixing of following sweep/ sizes PVC/ABS/Metal square body Exhaust Fan with automatic openable louvre shutter in existing opening including making connection, testing etc as required.

a 8.18.2 200 mm sweep (1300/ 1400 RPM) Each 2 2074

DSR 25 39.14 Supplying, Installation, Testing and commissioning of CAT6 Copper Information Outlet (IO) with face plate of color as per site requirement, should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D. All copper Cable and Components should be from same OEM to maintain compatibility and interoperability etc. complete as required. Each 12 212

DSR 25 30.12.2 Supplying, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/ round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports, bends, transitions, reducers, end caps, collars etc as required complete in all respect in confirmation with IS : 655 and approved drawings and specifications of following sheet thickness complete as required.

30.12.2.2 Thickness 0.80 mm sheet SQMT 25 1415

DSR 25 30.19 Supplying, Fixing, installation, testing and commissioning of thermal insulated flexible duct of following sizes duly supported at regular interval as per site requirement etc. in confirmation to SMACNA/IS and as per specifications complete etc. as required.

DSR 25 30.17 Supplying, Fixing, installation, testing and commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core in confirmation to SMACNA/IS and as per specifications complete etc. as required. SQMT 25 12841

DSR 25 30.18 Supplying, Fixing, installation, testing and commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core in confirmation to SMACNA/IS and as per specifications complete etc. as required SQMT 25 8595

MP SOR 57.2 Supply, installation, testing & commissioning of L.E.D. Television (4K L.E.D. Display O.S. Webos /Android or equivalent, minimum 50 Hz refresh rate Min. 20 W speaker, Wifi/bluetooth enabled, minimum 2 HDMI & 1USB Port, i/c remote and wall/table top accessories)

MP SOR 38.14 Supply, installation testing and commissioning of High-Speed HDMI corrosion-resistant connector & braided cable, Supports Ethernet, 3D, 4K video, computers and other HDMI-enabled devices Black as required to complete the job as mentioned below :-

38.14.6 + GST 20 Metre, HDMI cord Each 3

DSR 25 39.12 Supplying, Installation, Testing and commissioning of following CAT6 Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required.

. 39.12.2 Copper Patch Cords of length 3m (10ft) Each 12 227

Electrical Work (Schedule Items) Total (B) =

Civil+ Electrical Work (Schedule Items) Total (A+B) =

Renovation Work of Principal Secretary’s Chamber, Conference Hall, External Parking Development at Krishi Bhawan, Mithapur के कार्य

S.No. MR (Items) DESCRIPTION OF ITEMS Unit Quantity Quoted Rate In Figure(Rs.) (the quoted rate should be inclusive of all Taxes/cess, Royalty, Seignorage fee, Carriage of materials, Transporation cost of all materials from sources to work site, all overheads etc. complete in all respect) Quoted Rate In Word (Rs.) (the quoted rate should be inclusive of all Taxes/cess, Royalty, Seignorage fee, Carriage of materials, Transporation cost of all materials from sources to work site, all overheads etc. complete in all respect) Quoted Amount (Rs.) (the quoted rate should be inclusive of all Taxes/cess, Royalty, Seignorage fee, Carriage of materials, Transporation cost of all materials from sources to work site, all overheads etc. complete in all respect)

Civil Work (Non-Schedule Items)

1 NS-1 Supplying fitting and fixing of Marvel /Hunter Douglas/D'decor Make Roller Blinds as per company specification and as per approved colour and sample inclusive of all taxes and royalty all complete as per specifications / approval and direction of Engineer-in-Charge. Sqm 80

NS2 Providing & Fixing of Armstrong / Equivalent Wooden false ceiling Sqm 180

N.S-3 Providing & fixing of Veneer pasting of greenply/ marino/ century mica over existing flush door all complete as per direction of I/I . sqm 15

NS-4 Providing and fixing door latch and lock with necessary screws etc. complete (best make of approved quality) Each 4

NS-5 Providing and fixing wooden door handle with necessary screws etc. complete.

NS-6 Providing and fixing of veneered panelling upto specified height over 12 mm thick WPC board of Alstone / equivalent make fitted and fixed over Aluminium frame of 25 x 25mm posts at 30 cm centres and 25 x 25mm horizontal members at approx 30 cm centers including cost of anchoring the panelling to walls properly including termite treatment as per drawing specification and direction of E/I. Sqm 300

NS-7 Providing & fixing wall wall hung w.c with UF soft close set over hinges assecerries set size 360x500x380 mm,Jaquar ,cat.no -LYS - WHT -38953BIUFSM. or equivalent & Concealed Single piece slim concealed cistern cat.no -JCS - WHT -2400WS.with Flusing Control plate cat.no -JCP -CHR -372415.all complete. specification and direction of Engineer-in-charge. Each 3

NS-8 Provding and fixing white vitreous urinal (Jaquar URS-WHT-132530) or equivalent with Aquisense Sensor concealed type flushing valve for Urinal complete set with installation box with control cock ,(jaquar CAT NO- SNR-STL-51087) etc. all complete. Each 7

NS-9 Providing and fixing counter basin size- (mm) 190x550x430 (Jaquar,CAT NO- FLS-wht-5701) or equivalent including fixing and all accessories as per manufacturers specification and direction of Engineer-in-charge. Each 3

NS-10 Provding and fixing PVC fittings all complete as/specification & directionof E/I

110 mm vent cowel Each 8

110 mm plain bend Each 8

160 mm door bend Each 8

160 mm plain bend Each 8

110 mm door bend Each 8

110 X 110 mm dia door tee Each 6

110 X 110 mm dia plain tee Each 6

160 mm dia X 45 Bend Each 2

110 mm dia X 45 Bend Each 2

160 X 110 mm dia plain - y Each 2

110 X 110 mm dia plain - y Each 2

160 mm pipe clip Each 10

110 mm pipe clip Each 10

110 X110 mm dia p-trap Each 2

40 mm elbow Each 5

40 mm plain tee Each 5

NS-11 Providing Paper holder (jaguar AKP-35753PS) or Equivalent Each 4

NS-12 Providing Towel Ring (Jaquar product No. AKP-35751P ) or equivalent Each 4

NS-13 Soap dispenser (jaguar AKP-35735P) or equivalent Each 4

NS-14 CP brass 2-way bib cock with wall flange(Kubix-F) 15mm(jaguar -KUP-35041PM) or equivalent Each 4

NS-15 110 mm dia cp jali Each 6

NS-16 Providing & Fixing angle stop cock ,15 mm dia nominal bore (Jaquar -KUP-35053PM) or equivalent Each 4

NS-17 Providing & Fixing Soap Dish Holder (Jaquar product No. AKP-CHR-35731P) Each 4

NS-18 Providing, supplying and installing 2100mm high storage cum display cabinet made of 18mm thick BWP grade ply with lower portion below 900mm height to have solid openable shutters on auto closing hinges. The balance portion upto 2100mm height to have glazed openable shutters with 12mm glass shelves Complete with handles locks etc as required. The whole unit is to be finished with veneer of approved shade and all internal arears below 900mm to be laminated with 1mm mica of approved shade. Complete with necessary handles, locks, etc as requied. Size - 2100 x 1350 x 400mm deep sqm 5.5

CONFERENCE HALL

N.S-19 (A.R) Supplying fitting and fixing Godrej /Durian/ featherlite make Confrence Table Model DWS/ 34762/SP-21 - Table Size 7350x2550x750mm---01 Nos. & Table Size 6750x600x750mm----02 Nos. Conference table & extandable in length & width. The extendable meeting adds a sense of character to conference rooms. The innovation modular design enables varius configration. An all wood conference table with minimalist look and basic functionality, ideal for meeting room & top comes with 25mm thik pre lam particle board & side panel 18mm thick prelam particle board & 2mm pvc edge banding with modesty given much needed ptimary and close interaction. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. Color-Wenge.The Product Should be Certified Company BIFMA,ISO-50001,Green Guard,AGSI,FSC & PEFC. all complete as per company's specification inclusive of taxes and royalty all complete as per specification and direction of E/I. Each 1

N.S-20 (A.R) Supplying fitting and fixing Godrej /Durian/ featherlite make Medium Back Chiar Model 70001/MB/STANDARD Size (Back Height-530xBack Width-460)mm & (Seat Depth-450xSeat Width-460)mm with Min-Max Height (420-520)mm. Nylon base chair with push back mechanism & Fix handle. Nylon base chair with push back mechanism. Back & seat cover cushion chair uphlostered in fabric & adjustable armrest locks any position. Syncro mechenism with locking system and five star chrome base with nylon casters. Seat & Back made up of 14mm thick boiling water proof plywood os ISI303. Chair rotates a full 360 degree in either direction for ease of motion. Standard on every executive with task chair & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. Back reclines at A 2-to-1 ratio to the seat. 5% post consumed recycled content & 30% total recycled content. Color-Black.The Product should be PEFC, FSC, BIFMA, Green Guard, AGSI Certified & ISO 14001,50001 all complete as per company's specification inclusive of taxes and royalty all complete as per specification and direction of E/I. Each 42

N.S-28 Supplying fitting and fixing Godrej /Durian/ featherlite make 3 Seater Sofa Model JESSE/3 - Sofa Size - (L)1760mm X (D)720mm X (H)845mm. Fine Finesse. The Jesse sofa is what contemporary style looks like. This sofa is sleek and comfortable. The sleek frame is finished in a rich polish with split panel seating. The back and seat have medium to firm cushioning for better posture. The Leg of Solid wood in glossy finished. Frame used is treated American pine wood with termite free & borer free. Soft & comfortable cushion with high density and resilient foam. Frame used is Treated american pine wood & the wood used in sofa has been 8% moisture, this prevents the wood from wrapping and bending. all wood used is termite free and borer free. Foam of sofa comfortable cushion with high density and resilent foam. all apholstry materials used in specially designed.Color-Camel/ Green. The Product Should be Certified Company BIFMA, ISO-50001,Green Guard/Green PRO, Sedex, AIOTA, IGBC, AGSI,FSC & PEFC.all complete as per company's specification inclusive of taxes and royalty all complete as per specification and direction of E/I. Each 2

N.S-29 POLKA- Material & Subtype Solid Wood - Beech Wood Table Top Material Solid Wood Leg Material Metal Finish Matte Colour & Colour Family Brown - Teak Dimension (Dia)390mm X (H)460mm Size Compact Warranty 5 Years Style Contemporary Assembly Type Knock Down Each 15

Civil Work (Non-Schedule Items) Total (C) =