MAINTENANCE OF INTERNAL ELECTRIC SUPPLY OF CERTAIN UNITS OF 140 ARMD BDE AT MIL STN JAISALMER

Amount

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes complete all as specified and directed by Engineer-in-charge.

Taking down the existing unserviceable MCBs/MCCBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes complete all as specified and directed by Engineer-in-charge.

Taking down carefully unsv electric switches,sockets , ceiling roses, pendents, regulators, bell light fitting etc removing materials for taking credit and making good disturbed surface of walls,floors etc complete all as specified and directed by Engineer-in-charge.

S&F Switch modular 6 Amps single pole, one way as per existing pattern complete all as specified and directed by Engineer-in-charge.

S&F modular Socket outlet, multi purpose, 6 Amps 3 pin combined 2 module as per existing pattern complete all as specified and directed by Engineer-in-charge.

S&F modular Bell push 6 Amps 1 module as per existing pattern complete all as specified and directed by Engineer-in-charge.

S&F modular Socket 16 Amps, 5 pin combined 2 module as per existing pattern complete all as specified and directed by Engineer-in-charge.

S&F modular Switch 16 Amps one way 1 module as per existing pattern complete all as specified and directed by Engineer-in-charge.

S&F Switch modular 6 Amps two way, 1 module complete all as specified and directed by Engineer-in-charge.

S&F modular fan regulator 5 step type, 2 module complete as per existing pattern complete all as specified and directed by Engineer-in-charge.

S&F switch piano flush type single pole, one way 5 amps, 230 Volts complete as per existing pattern complete all as specified and directed by Engineer-in-charge.

All as per Item No 11.00 here-in-before but 5 Amps, 2 way complete as per existing pattern complete all as specified and directed by Engineer-in-charge.

S&F of socket outlet flush type 5 Amps, 3 pin, 230 Volts as per IS as per existing pattern complete complete all as specified and directed by Engineer-in-charge.

S&F of switch socket combination flush type 2 in 1, 5 Amps, 230 Volts as per existing pattern complete all as specified and directed by Engineer-in-charge.

S&F of switch piano flush single pole one way 15 Amp 230 volt as per existing pattern complete all as specified and directed by Engineer-in-charge.

S&F of socket outlet flush type multipurpose 2 in 1, 5 pin 5 and 15 Amp, 230 volts as per existing pattern complete all as specified and directed by Engineer-in-charge.

S&F of switch socket combination flush type multipurpose 2 in 1, 3 pin, 5 and 15 Amp, 230 volts as per existing pattern complete all as specified and directed by Engineer-in-charge.

S&F of bell push single pole, 5 amps, 230 Volts, flush type as per existing pattern complete all as specified and directed by Engineer-in-charge.

S&F of Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engineer-in-charge.

S&F of Fan regulator, step type, flush type, 230 volts 50Hz single phase, piano type as per existing pattern complete all as specified and directed by Engineer-in-charge.

S&F of Bell Ding Dong ,AC, 230 Volts,single pole complete all as specified and directed by Engineer-in-charge.

S&Fof ceiling rose, 3 terminal ,AC, 230 Volts PVC/polycarbonate, isolated body, single pole complete all as specified and directed by Engineer-in-charge.

S&F of repair of PVC insulation Tape roll 20mm width and 8 metre in length for electrical wire colour code red, yellow, blue & black joints complete all as specified and directed by Engineer-in-charge.

M/L for repair/refixing of loosely hanged PV/steel conduit, PVC casing & caping of any type, size by means of shadles, clamps screwes to existing wall/ceiling and making good in all respect incl wiring inside all as shown complete all as specified and directed by Engineer-in-charge.

S&F in replacement of PVC casing, capping of 20mm width ISI marked with all accessories complete all as specified and directed by Engineer-in-charge.

S&F in replacement of PVC conduit pipe of 20mm dia including tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed by Engineer-in-charge.

S&F in repair of white colour finished mounting modular surface box of suitable size complete all as specified and directed by Engineer-in-charge for following sizes :-

One module

Two module

3 modules

4 modules

6 modules

8 modules

12 modules

S&F in repair of modular white cover plate with frame inner and outer plates for complete all as specified and directed by Engineer-in-charge for following sizes :-

1 module

2 modules

3 modules

4 modules

6 modules

8 modules

12 modules

S&F of in repair plastic laminated bakelite sheet cover of hylem 2.8 mm thick including cutting holes for switches, sockets etc as pre requirement including fixing with brass machine screws and washer complete all as specified and directed by Engineer-in-charge for following sizes :-

10" x 12" size

8" x 10" size

8" x 6" size

7" x 4" size

4" x 4" size

S&F in repair of PVC rectangular block gang box for mounting switches, sockets, fan regulator etc including cutting holes for switches, sockets etc as pre requirement including fixing with brass machine screws complete all as specified and directed by Engineer-in-charge for following sizes :-

10" x 8" size

8" x 6" size

7" x 4" size

4" x 4" size

S & F in reapir of MCCB DB VTPN 4 way 415 V double door IP 43 with provision for FP MCCB/Isolator/RCCB etc as incommer and SP/TP MCBs as out going complete prewired including Bus Bar etc suitable for operation on 415 volt 50 Hz AC supply complete all as specified and directed by Engineer-in-charge.

S & F in reapir of sheet metal enclosure double door MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts double door with magnitic locking system complete all as specified and directed by Engineer-in-charge.

S & F in reapir of sheet metal enclosure double dooor MCB SPN DB 12 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified and directed by Engineer-in-charge.

S & F in reapir of sheet metal enclosure double door MCB SPN DB 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified and directed by Engineer-in-charge.

S & F in reapir of sheet metal enclosure double dooor MCB SPN DB 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified and directed by Engineer-in-charge.

S&F Sheet metal and neutral enclosure single pole with two pin and earth plug and socket single pole MCB 20 Amps 240 volts fixed complete all as specified and directed by Engineer-in-charge.

S & F MCCB 415 V, 16 KA, 4 pole suitable for fixing on DB of capacity 63 Amps with extended terminals complete all as specified and directed by Engineer-in-charge. Note : MCCB rating ICS =100% ICU

S & F MCCB 415 V, 16 KA, 4 pole suitable for fixing on DB of capacity 100 Amps with extended terminals complete all as specified and directed by Engineer-in-charge. Note : MCCB rating ICS =100% ICU

S & F MCCB 415 V, 16 KA, 4 pole suitable for fixing on DB of capacity 125 Amps with extended terminals complete all as specified and directed by Engineer-in-charge. Note : MCCB rating ICS =100% ICU

S & F MCCB 415 V, 16 KA, 4 pole suitable for fixing on DB of capacity 160 Amps with extended terminals complete all as specified and directed by Engineer-in-charge. Note : MCCB rating ICS =100% ICU

S&F MCB's TPN 63-100 Amps, 415 Volts,10 kA 'C' curve complete all as specified and directed by Engineer-in-charge. Note : MCB TPN rating ICS =100% ICU

Supply and fixing miniature circuit breaker (MCB) of single pole and neutral SPN 32 to 63 AMP 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engineer-in-charge.

Supply and fixing miniature circuit breaker (MCB) of single pole SP 10-32 AMP 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engineer-in-charge.

S & F in repair of LED Bulb warm white 9 Watt of Base E27complete all as specified and directed by Engineer-in-charge.

Supply and fixing of LED box type Integrated Batten Wattage 20 watt having Aluminum Extruded housing in white powder coated Finish with high translucent PC Cover, Dimension of the Fixture Must not be less Then Length 1170 MM (± 5 MM ), Elegant Design, IP 20 Protection. Minimum Lumens output of the fitting shall be 2500 Lumens With Efficacy of 125 lm/W, CCT 5700 – 6500K, Surge Protector 4 KV, PF>= 0.95 , Necessary mounting arrangements. The Manufacturer of the fixture shall have in house NABL Accredited Lab and must produce certificate of the same along with Lm-79 / LM-80 / Test Report complete all as specified and directed by Engineer-in-charge.

Supply and fixing of LED box type Integrated Batten Wattage 20 Watt having Aluminum Extruded housing in white powder coated Finish with high translucent PC Cover, Dimension of the Fixture Must not be less Then Length 1130 MM (± 5 MM ),WARM WHITE Color, Elegant Design, IP 20 Protection. CCT 2700 – 3000k, Surge Protector 4 KV, PF>= 0.95 , Necessary mounting arrangements. The Manufacturer of the fixture shall have in house NABL Accredited Lab and must produce certificate of the same along with LM-79 / LM-80 / Test Report complete all as specified and directed by Engineer-in-charge.

Supply and fixing of LED box type Integrated Batten 40 watt having Aluminum Extruded housing in white powder coated Finish with high translucent PC Cover, Elegant Design, IP 20 Protection. Dimensions of the Fitting Shall be Not less then 1200 MM ( Length) X 40 MM ( Width ) X 63 MM ( Height ). Lumens output of the fitting shall be not less then 4400 lm, CCT 5700 – 6500K, buring hours 50,000 Surge Protector 4 KV, PF>= 0.95 , Separate detachable type Electronic constant current drivers for easy replacement and ntenance, THD < 10% , Necessary mounting arrangements .The fixture shall be suitable for wall mounting /suspension mounting as per site requirement. The Manufacturer of the fixture shall have in house NABL Accredited Lab and must produce certificate of the same along with LM-79 / LM80 / Test Report complete all as specified and directed by Engineer-in-charge.

S & F for LED tube light fitting 10 Watt, 2 Feet or 591 MM in length, IP 20 Protection, wall mounted type, Slim LED Batten with extruded aluminium housing and polycarbonate diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver, IP 20 Protection, Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 1000, necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified and directed by Engineer-in-charge.

Supply and fixing of recessed/ceiling mounted down lighter with CRCA housing with high bright LED,idealy suited for low ceiling areas Brilliance 36watt LED, size 2ft x 2ft The product features color tuning from CCT 5700K – 6000 k, Surge Protector 4 KV, PF>= 0.95 , necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified and directed by Engineer-in-charge.

Supply and fixing of recessed/ceiling mounted down lighter with CRCA housing with high bright LED,idealy suited for low ceiling areas Brilliance 36watt LED, size 2ft x 2ft The product features color tuning from CCT 2700 – 3000k, Surge Protector 4 KV, PF>= 0.95 , necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified and directed by Engineer-in-charge.

S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and including of LED bulb 15 watts complete all as specified and directed by Engineer-in-charge.

S & F in repair recess mounted/Surface mounted/POP mounted or as per site requirement LED down light 06 Watt round/Square in shape worm white or 2700 K- 3000 K as per user requirement Ideal for wardobes, furniture lighting, display & interior decoration of complete all as specified and directed by Engineer-in-charge.

S & F in repair for LED down lightrecess mounted/Surface mounted/POP mounted or as per site requirement, square/Round type worm white / Neutral white or 2700 K- 3000 K as per user requirement 18 watts with efficiency of 100 lumens per watt, in worm white/ neutral white as per site requirement sleek design aluminium housing polycarbonate diffuser white finish operating voltage from ceiling rose to fitting complete all as specified and directed by Engineer-in-charge.

S & F in repair for LED down lightrecess mounted/Surface mounted/POP mounted or as per site requirement, square/Round type worm white / Neutral white or 5600 K-6000K as per user requirement 18 watts with efficiency of 100 lumens per watt, in worm white/ neutral white as per site requirement sleek design aluminium housing polycarbonate diffuser white finish operating voltage from ceiling rose to fitting complete all as specified and directed by Engineer-in-charge.

Supply and fixing LED building security light fitting 35 Watt (or above) 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with electronic driver including thermal management in multiple optics complete with IP 65/66 protection complete with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and directed by Engineer-in-charge.

Supply and fixing LED building security light fitting 30 Watt (or above) 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with electronic driver including thermal management in multiple optics complete with IP 65/66 protection complete with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as directed by Engineer-in-Charge.

S &f in repair of GI pipe bracket medium grade of 40 mm dia for building security light,clamps made of FI 40 mm x 6 mm Incl nuts,bolts & washers, painting complete all as specified and directed by Engineer-in-charge.

S&F Integral decorative LED bollard with polycarbonate diffuser square shaped with IP 65 protection suitable for 10 watts ,(0.6 M) hieght LED with necessary MS base box made out of MS sheet of 2 mm thick of suitable size abbended in PCC 1:2:4 base, elecrical connections with adequate size including removal of old unserviceable complete as all specified and as directed.

S & F for LED post top lantern/gate Light 20 watt light fitting made of die cast top housing must also be dia cast aluminium spigot housing with decarative acrylic diffuser with IP 65 protection complete with all accessories including removal of old unserviceable complete all as specified and directed.

S & F for LED post top lantern/gate Light 40 watt light fitting made of die cast top housing must also be dia cast aluminium spigot housing with decarative acrylic diffuser with IP 65 protection complete with all accessories including removal of old unserviceable complete all as specified and directed.

Supply and fix energy saving, environment friendly & robust Highbay/Mediumbay roof truss light LED for covered shed 150 W IP65 luminaire with high efficacy with fixing arrangement such as bracket,MS clamp, Nut bolts etc and connecting complete all as specified and directed by Engineer-in-charge.

S/F flame proof rotary type switch with termination box in LM6, 16A, douple pole 250V complete all as specified and directed by Engineer-in-charge. Make - Sudhir, Shyam or equivalent amke as approved by GE.

Supply and fixing LED light fitting 1x20 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable in flexible metalic conduit with suitable size complete all as specified and directed by Engineer-in-charge.

S&F in repair of Three core cable PVC insulated and unsheathed multistranded copper conductor of size 1.5 Sqmm complete all as specified and directed by Engineer-in-charge.

S&F in repair of Three core cable PVC insulated and unsheathed multistranded copper conductor of size 2.5 Sqmm complete all as specified and directed by Engineer-in-charge.

S&F in repair of 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 06 sq. mm 2 Core nominal cross section in service connections complete all as specified and directed by Engineer-in-charge.

M&L for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 4.0 Sq mm (FRLS) including PVC casing & capping non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 4.0 Sq mm (FRLS) of continuous earth wire green in colour including taking down old u/s sub-main wiring complete all as specified and directed by Engineer-in-charge. NOTE : Two runs of 4.0 sqmm cable & One run of 4.0 sqmm cable and One run of PVC casing & capping shall be paid as one unit length.

M&L for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 6.0 Sq mm (FRLS) in and including PVC casing & capping non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 6.0 Sq mm (FRLS) of continuous earth wire green in colour including taking down old u/s sub-main wiring complete all as specified and directed by Engineer-in-charge. NOTE : Two runs of 6.0 sqmm cable & One run of 6.0 sqmm cable and One run of PVC casing & capping shall be paid as one unit length.

Repair, maint and making the continuity of electric supply after rectifying the defects of the electrical items such as Main DB's, switches, sockets, fan regulator, replacement of MCB (light/power), lamp holders (bracket/ batten), bell/buzzer, push button, ceiling rose, capacitors, tube light fitting any type, ceiling lights, flame proof light , MCB DB, rotary type switch single pole/double pole, switch socket and plug combined, tube light fitting, and other similar electrical items/fittings etc. including providing of small pieces of electrical wire of size 1.5 sqmm to 10 sqmm single core and length not exceeding 0.50 mtrs complete all as specified and directed by Engineer-in-Charge.

Item NO. 69.00 Contd... Note :- (i) Contractor will arrange minimum 2 well skilled electrician and 2 skilled helper to attend repair of internal electrical system at site as required by Engr-in-Charge. (ii) Complain should complete the assigned job within 48 Hrs after receipt of the assignment. If the contractor fail to completed the assigned job in the given time recovery will be made Rs. 50.00 @ Per Job. Non reporting of trademen : 300/- per elect & Helper 200/- per helper per day. (iii) Providing of safety equipments to the electrician/labour/Helper will be responsibility of the contractor. (iv) Register of repair should be prepared by the contractor and details of repair to be updated in the register after completion of every repair work. (v) Contractor will arrange vehicle, electrical tools, folding ladder, misc item like insulation tape, screws, nuts and bolts for repair work.

Rasam Engg Co.

DHANANJAY CONSTRUCTION

Aman Enterprises

SHRI HARI CONSTRUCTION

Manisha Enterprises