Supply, Installation, Testing, Commissioning and Maintenance of Electromechanical equipment and allied works for Pumping arrangement for water supply system at various sites under PMAY (Second Call)

Amount

Supply, Installation, Testing, Commissioning & Maintenance of Electromechanical equipment and allied works for Pumping arrangement for water supply system at various sites under PMAY.

1000033972-one set of pump Each pump flow capacity:34 cum/hr. Total head:50mtr 4 nos. of pumps, system flow 136 cum/hr. (3w+1s)

1000033972-one set of pump Each pump flow capacity:35 cum/hr. Total head:45mtr 4 nos. of pumps, system flow 140 cum/hr. (3w+1s)

1000033972-one set of pump Each pump flow capacity:33 cum/hr. Total head:35mtr 4 nos. of pumps, system flow 132 cum/hr. (3w+1s)

1000033972-one set of pump Each pump flow capacity:35 cum/hr. Total head:45mtr 3 nos. of pumps, system flow 105 cum/hr. (2w+1s)

1000033972-one set of pump Each pump flow capacity:34 cum/hr. Total head:50mtr 2 nos. of pumps, system flow 68 cum/hr. (1w+1s)

1000033972-one set of pump Each pump flow capacity:34 cum/hr. Total head:50mtr 3 nos. of pumps, system flow 102 cum/hr. (2w+1s)

1000033972-one set of pump Each pump flow capacity:23 cum/hr. Total head:45mtr 3 nos. of pumps, system flow 69 cum/hr. (2w+1s)

1000033972-one set of pump Each pump flow capacity:23 cum/hr. Total head:50mtr 3 nos. of pumps, system flow 69 cum/hr. (2w+1s)

1000033972-one set of pump Each pump flow capacity:11.3 cum/hr. Total head:25mtr 2 nos. of pumps, system flow 22.6 cum/hr. (1w+1s)

1000033973-the prriming sytem for negative suction condition of the hydro - pneumatic fully automatic pumping system, which should create a vaccum in the pumnp suction and in the section hose allowing all the air to be removed and the water to be drawm up word twoards the pump the priming system should consist of the following main components: 1-a sutable capacity, vaccum pump (capacity design by the vendor )with electrical motor, sutable to be operate on 415V,3phase AC power supply. the power consumtion of the vaccum pump should not exist 5 KW.THE design of the vaccum priming system should with such that the priming time should not exist 20sec under all operation conditions.

1000033974-SUPPLY AND FIXING OF FOLLOWING SIZE heavy duty PVC conduit along with accessories complete as required 25mm

1000033975-supplying and installing powder coated perforted M.S.MS cable trays with perforation not more than 17.5 % rigidly suspended from the ceiling with MS Suspendres at a distance not more than 2.5m and near every/ joint etc complete as required of following size 100MM width X 50MM DEPTH X 1.6MM thickness

1000033976-SUPPLYING AND ERECTING EARTH PIT OF MINIMUM bore dia 150mm size approved make safe earthing eltrod consisting pipe in pipe tecnology as per IS 3043-1987 made of corriosion free GI pipe heaving outer pipe dia of 50MM heaving 80-200 micron galvanising,iner pipe dia of 25MM heaving 20-250 micron galavinsing, connection triminial dia 12MM WITH constent OHMIC value surronded buy highly conductive compund with high charge disipation suitable for efective and maintanence free earthing with 2meter pipe in normal soil 25kg (1bag) back felling compund

1000033977-SUPPLYING INSTALLITION TESTING AND COMMSSIONING OF pressure tank with rubber diaphargm of following capacity as per bellow given details :- a pre -charged carbon steel/MS epoxy coated diaphargm tank with a non matalic internal coating which shall insure no contact of water with the MS oter body,shpould be feted to the discharge pipe with a comtable butyl-rubber diaphargm.it should supply water very low flow to minimies frequend pump start and stock and water hambering. there should be comnplete sepration bettween water and air abd there should be no contact bettween water and tank compund to avoid corrosion. bladdersdiaphargm should be suitable for suffient ellastic city to permit full expension inside the tank insure better performance and longer working life complete in all respect as per tecnical specification and as per direction of engineer in charge. the tank should be either manufactured by the HPN manufacture or as per list of approved make. 450LTR. pressure tank

b) CI bend 22.5° (250mm dia)1000033977-SUPPLYING INSTALLITION TESTING AND COMMSSIONING OF pressure tank with rubber diaphargm of following capacity as per bellow given details :- a pre -charged carbon steel/MS epoxy coated diaphargm tank with a non matalic internal coating which shall insure no contact of water with the MS oter body,shpould be feted to the discharge pipe with a comtable butyl-rubber diaphargm.it should supply water very low flow to minimies frequend pump start and stock and water hambering. there should be comnplete sepration bettween water and air abd there should be no contact bettween water and tank compund to avoid corrosion. bladdersdiaphargm should be suitable for suffient ellastic city to permit full expension inside the tank insure better performance and longer working life complete in all respect as per tecnical specification and as per direction of engineer in charge. the tank should be either manufactured by the HPN manufacture or as per list of approved 300 LTR. pressure tank

1000033977-SUPPLYING INSTALLITION TESTING AND COMMSSIONING OF pressure tank with rubber diaphargm of following capacity as per bellow given details :- a pre -charged carbon steel/MS epoxy coated diaphargm tank with a non matalic internal coating which shall insure no contact of water with the MS oter body,shpould be feted to the discharge pipe with a comtable butyl-rubber diaphargm.it should supply water very low flow to minimies frequend pump start and stock and water hambering. there should be comnplete sepration bettween water and air abd there should be no contact bettween water and tank compund to avoid corrosion. bladdersdiaphargm should be suitable for suffient ellastic city to permit full expension inside the tank insure better performance and longer working life complete in all respect as per tecnical specification and as per direction of engineer in charge. the tank should be either manufactured by the HPN manufacture or as per list of approved make. 200LTR. pressure tank.

1000033978-SUPPLYING INSTALLITION PRESSURE GAUGE 100MM dia, 0 TO 10KG per square CM feeted with 12/15MM DIA. pad cock valve, and nipple, ellbow etc. as per reqirement

1000033979-PROVIDIMG AND FIXING HEAVY DUTY FOOT VALVE type as per relivant IS standard suitable above hydro penumatic system including jointing and testing with cost of jointing material such as bolds, nuts,rubber insertion etc all complaint 100MM DIA

1000033979-PROVIDIMG AND FIXING HEAVY DUTY FOOT VALVE type as per relivant IS standard suitable above hydro penumatic system including jointing and testing with cost of jointing material such as bolds, nuts,rubber insertion etc all complaint 150MM DIA

1000033980-PROVIDIMG AND FIXING HEAVY DUTY STRAINER AS PER relivant IS standard suitable above hydro penumatic system including jointing and testing with cost of jointing material such as boats nut,rubber insertion etc all completed 100 MM DIA

1000033980-PROVIDIMG AND FIXING HEAVY DUTY STRAINER AS PER relivant IS standard suitable above hydro penumatic system including jointing and testing with cost of jointing material such as boats nut,rubber insertion etc all completed 150 MM DIA

1000033983- supply and fixing of Heavy duty Brass Ball type Float valve complete including Body ,Ball(+)

1000033985-PROVIDIMG AND FIXING BALL VALVE {BRASS} OF APPROVED QUALITY,HIGH OR LOW PRESSURE, WITH PLASTIC FLOATS COMPLETED : . 25 MM DIA

1000033987-providing laying and jointing of galvanised iron pipes with special (such as bends ellbows tees etc) class heavy (c"class) including testing of joints cost of pipes, specials and jointing materials all complete pipes and socked conforming to is-1239/2004 part-1 and part-2 100 MM DIA40

1000033987-providing laying and jointing of galvanised iron pipes with special (such as bends ellbows tees etc) class heavy (c"class) including testing of joints cost of pipes, specials and jointing materials all complete pipes and socked conforming to is-1239/2004 part-1 and part-2 150MM DIA

1000033989-PROVIDING AND SUPPLING M.S FLANGE FOR following dia of pipe as per ASA#150 standard and as per relevnt IS code duly tested for usage in drinkimg water exclusive of all material etc complete as per direction of engineer in charge DIA OF PIPE 100MM

1000033989-PROVIDING AND SUPPLING M.S FLANGE FOR following dia of pipe as per ASA#150 standard and as per relevnt IS code duly tested for usage in drinkimg water exclusive of all material etc complete as per direction of engineer in charge DIA OF PIPE 150MM

1000033991-PROVIDING AND FIXING BUTTERFLY VALVE of pn 10 raing cs/alluminium body asses 316 disk/EPDM seat ecluding jointing and testing with cost of jointing material such as bolds, nuts and rubber insertion all complete in all respest as per technuical specification and as per direction of ingineer incharge DIA OF PIPE 100MM

1000033991-PROVIDING AND FIXING BUTTERFLY VALVE of pn 10 raing cs/alluminium body asses 316 disk/EPDM seat ecluding jointing and testing with cost of jointing material such as bolds, nuts and rubber insertion all complete in all respest as per technuical specification and as per direction of ingineer incharge DIA OF PIPE 150MM

1000033997-PROVIDING AND FIXING NON return valve (sandwich type) of PN 10 rating with CI/SGI body ss316 disc/EPDM SEAT, COMPLETE IN ALL RESPECT AS PER TECHNICAL SPECIFICATION AND AS PER DIRECTION OF ENGINEER IN CHARGE dia of pipe 100mm

1000033997-PROVIDING AND FIXING NON return valve (sandwich type) of PN 10 rating with CI/SGI body ss316 disc/EPDM SEAT, COMPLETE IN ALL RESPECT AS PER TECHNICAL SPECIFICATION AND AS PER DIRECTION OF ENGINEER IN CHARGE dia of pipe 150mm

1000033998-PROVIDING AND INSTALLATION FR PVC INSULLATED COPPER conductor single core cable in the existing surface consult steel/PVC conduct/PVC casing caping in approved manner asper specification etc where ever required including connection testing etc. complete of following size. 3*1.5 square meter

1000033999-RATE FOR COMPREHENSIVE ON SITE and offsite maintenance of Electromechanical equipment and allied works for Pumping arrangement for water supply system installed a s above. Note:‐ After completion of mandatory two years of comprehensive maintenance during the DLP the bidder will have to provide comprehensive maintenance of the system installed by him for another eight years. Comprehensive maintenance will include all spares, dismantling and assembling of the system, labour charges, required transportation to workshop and back etc all completE FOR THIRTH YEAR

1000033999-RATE FOR COMPREHENSIVE ON SITE and offsite maintenance of Electromechanical equipment and allied works for Pumping arrangement for water supply system installed a s above. Note:‐ After completion of mandatory two years of comprehensive maintenance during the DLP the bidder will have to provide comprehensive maintenance of the system installed by him for another eight years. Comprehensive maintenance will include all spares, dismantling and assembling of the system, labour charges, required transportation to workshop and back etc all complete FOR FOURTH YEAR

1000033999-RATE FOR COMPREHENSIVE ON SITE and offsite maintenance of Electromechanical equipment and allied works for Pumping arrangement for water supply system installed a s above. Note:‐ After completion of mandatory two years of comprehensive maintenance during the DLP the bidder will have to provide comprehensive maintenance of the system installed by him for another eight yea Comprehensive maintenance will include all spares, dismantling and assembling of the system, labour charges, required transportation to workshop and back etc all complete FOR FIFTH YEAR

1000033999-RATE FOR COMPREHENSIVE ON SITE and offsite maintenance of Electromechanical equipment and allied works for Pumping arrangement for water supply system installed a s above. Note:‐ After completion of mandatory two years of comprehensive maintenance during the DLP the bidder will have to provide comprehensive maintenance of the system installed by him for another eight years. Comprehensive maintenance will include all spares, dismantling and assembling of the system, labour charges, required transportation to workshop and back etc all complete FOR SIXTH YEAR

1000033999-RATE FOR COMPREHENSIVE ON SITE and offsite maintenance of Electromechanical equipment and allied works for Pumping arrangement for water supply system installed a s above. Note:‐ After completion of mandatory two years of comprehensive maintenance during the DLP the bidder will have to provide comprehensive maintenance of the system installed by him for another eight year Comprehensive maintenance will include all spares, dismantling and assembling of the system, labour charges, required transportation to workshop and back etc all complete FOR SEVENTH YEAR

1000033999-RATE FOR COMPREHENSIVE ON SITE and offsite maintenance of Electromechanical equipment and allied works for Pumping arrangement for water supply system installed a s above. Note:‐ After completion of mandatory two years of comprehensive maintenance during the DLP the bidder will have to provide comprehensive maintenance of the system installed by him for another eight y Comprehensive maintenance will include all spares, dismantling and assembling of the system, labour charges, required transportation to workshop and back etc all complete FOR EIGHTH YEAR

1000033999-RATE FOR COMPREHENSIVE ON SITE and offsite maintenance of Electromechanical equipment and allied works for Pumping arrangement for water supply system installed a s above. Note:‐ After completion of mandatory two years of comprehensive maintenance during the DLP the bidder will have to provide comprehensive maintenance of the system installed by him for another eight years. Comprehensive maintenance will include all spares, dismantling and assembling of the system, labour charges, required transportation to workshop and back etc all complete FOR NINTH YEAR

1000033999-RATE FOR COMPREHENSIVE ON SITE and offsite maintenance of Electromechanical equipment and allied works for Pumping arrangement for water supply system installed a s above. Note:‐ After completion of mandatory two years of comprehensive maintenance during the DLP the bidder will have to provide comprehensive maintenance of the system installed by him for another eight years. Comprehensive maintenance will include all spares, dismantling and assembling of the system, labour charges, required transportation to workshop and back etc all complete FOR TENTH YEAR

Dronkar AND Bros.