Macadamisation of internal roads by way of providing laying wet mix macadam WMM 50mm thick bituminous macadam and 25mm thick semi dense with 6mm thick seal coat at IE Rangreth

Amount

Note: Contractor should Quote Rates with all taxes.

P/L spreading and compacting graded stone aggregate (size range 53mm to 0.75mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical, mix plant carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical apver finixher in sub-base / base course on well prepred surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired denisty complete as per specifications and directions of Engineer in Charge.

Providing and applying tack coat @ 0.50 Kg/Sqm using hot straight run bitumen of VG-10 grade including heating the bitumen, sprayning the bitumen with cleaning and preparing the existing surface to remove all dirt, dust, mud etc., and finally brimming the surface as per required specification of BT surface.

Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers,laidover a previosly prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem road rollers as per specifications to achieve the desired compaction and denisty, complete as per the specifications and directions of Engineer-in-Charge with of 50 to 100 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in batch type HOT MIX Plant pf 100 120 TPH capacity.

Providing and laying 25mm thik compacted semi - dense bituminous concrete using crushed stone aggregates of specified grading premixed with bituminous binder and filler, transporting the hot mix to site by tippers,laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem road rollers as per specifications to achieve the desired compaction and denisty, complete as per the specifications and directions of Engineer-in-Charge with of 25mm compacted thickness with bitumen of grade VG-10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of aggregate) prepared in batch type HOT MIX Plant pf 100 120 TPH capacity.

Providing and laying 25mm thik compacted seal coat of premixed fine aggregate (passing 2.36mm and retained on 180 micron sieve with 128 kgs) bitumen of VG-10 grade per Cum of fine aggregate and 0.60 cum of fine aggregate per 100 Sqm of road surface including rolling and finishing complete as per MOST specification.

Providing and applying 2.5mm thick road marking strips (retro-reflective)of specified shade/ colour using hot thermoplastic material by fully / semiautomatic thermoplastic paint applicator machine fitted with propane with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by expereienced oprator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, rease and foriegn material etc., complete as per directions of teh Engineer-in-Charge and accoradnce with applicale specifications.

AJS CONSTRUCTION GROPU (BID ID -2516207)

ISHFAQ ABDULLAH BHAT (BID ID -2524919)

RIGHTWAY CONSTRUCTIONS (BID ID -2517055)