Renovation of PHS in allotted House No. 3101, 3108, 3142, 3172, 3174 and 3178 (Type 12), Sector 15, Chandigarh (Total 06 Nos. Houses) (IBM No. W4/2025/25216)

Excavating trenches by mechanical/mannual mean of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms for all depth including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m

All kinds of soil

Pipes, cables etc. not exceeding 80 mm dia.

Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Cement mortar 1:4 (1 cement : 4 coarse sand)

12 mm cement plaster finished with a floating coat of neat cement of mix :

1:4 (1 cement: 4 fine sand)

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. Brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

Kitchen sink without drain board

610x460 mm bowl depth 200 mm

Providing and fixing white vitreous china water closet squatting pan (Indian type) :

Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in -charge.

Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.

10 litre (full flush) capacity-white

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible pipe

32 mm dia

Providing and fixing soil, waste and vent pipes :

100 mm dia.

Centrifugally cast (spun) iron socketed pipe as per IS: 3989.

75 mm diameter :

Centrifugally cast (spun) iron socketed pipe as per IS: 3989.

Providing and fixing heel rest sanitary bend

100 mm dia

Sand cast iron S&S as per IS - 3989

Providing and fixing collar :

Sand cast iron S&S as per IS - 3989

Sand cast iron S&S as per IS - 3989

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter :

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

100 mm inlet and 75 mm outlet

Sand Cast Iron S&S as per IS- 3989.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc.

20 mm dia nominal bore

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :

15 mm dia nominal bore

20 mm dia nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

20 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions :

45 cm length

15 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :

20 mm dia nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :.

15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

15 mm nominal bore

Providing and fixing C.P. Brass extension nipple (size15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.

20 mm nominal bore, 120 mm long, weighing not less than 198 gms

Cutting holes up to 30x30 cm in walls including making good the same:

With common burnt clay F.P.S. (non modular) bricks

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards

15 mm nominal bore

Providing and fixing of size 22"x16" beveled edge of superior glass of approved quality complete with 5mm thick hard board complete in all respect.

Providing and fixing of SS long 32 mm bend complete in all respect.

Providing and fixing of CP cup of size 15 mm complete in all respect.

Provinding and fixing of C.P shower with arm of size 150mm complete in all respect to entire satisfaction of EIC.

Providing and Fixing of C.P Soap Dish of size 15mm complete in all respect to entire satisfaction of EIC.

Providing and Fixing of C.P Towel Ring (round) complete in all respect to entire satisfaction of EIC.

Providing and Fixing of C.P Towel Rail of size 600mm long complete in all respect to entire satisfaction of EIC.

Providing and fixing 20 mm tank nipple complete in all respect to entire satisfaction of EIC.

Providing and fixing of SFRC GT cover with frame of size 300x300x50mm complete in all respect to entire satisfaction of EIC.

Providing and fixing of SFRC IC cover with frame of size 600x600x50mm complete in all respect to entire satisfaction of EIC.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality size :15mm complete in all respect to entire satisfaction of EIC.

Dismantling of G.I./C.I. Pipes and taking out the pipes, manully by mechanical means including stacking of pipes with in 50 metres lead as per direction of Engineer-in-Chandigarh.

Providing and fixing of HCI P-trap fixed in CC 1:2:4 complete in all respect to entire satisfaction of EIC.

Please Enable Macros to View BoQ information