82666 REPAIRS TO JOINERY B R WORKS TO CERTAIN BUILDINGS IN MD AND OTM ACCN OF ZONE A UNDER AGE (I) NAVY CHENNAI

Amount

SCHEDULE 'A' (B/R WORK)

Taking down chowkhats with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4.0 sqm each complete all as specified and directed.

Taking down Shutters of any description exc 1 sqm but not exc 2 Sqm each complete all as specified and directed.

Taking down Shutters of any description not exc 1 sqm Sqm each complete all as specified and directed.

Taking down and refixing the same opening of door Shutters of any description exc 1 sqm but not exc 2 Sqm each and including easing and adjusting before fixing of door shutter complete all as specified and directed.

Taking down and refixing the same opening of door Shutters of any description n exc 1 sqm but each and including easing and adjusting before fixing of door shutter complete all as specified and directed.

Demolition of Brickwork built in cement motar, stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material and Labour for Brickwork with flyash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

Supply and fix for Aluminum powder coated frame with doors shutters, with one or more rebates, Aluminum Partitions sides and middle sections , Aluminum powder coated sliding three track windows of frame with shutters and Fixed types Aluminum ventilators with louvers including fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.complete all as specified and directed. Note :- (a) Thickness of powder coating not less than 50 micron. (b) Weight of Aluminum sections to be measured only and misc items i.e rubber beading rollers handles, hinges and tower bolts and door stoppers, window locks etc deemed to including the quoted rates. (c) Wire mesh, Glass, door closer and Mortise lock will be measured and paid separately.

Supply and fix for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in- charge. complete all as specified and directed.

Supply and fix for Stainless steel wire cloth. 0.36mm nomonal dia of wire and 1.40mm average width of aperture and fixed with aluminium wire staples complete all as specified and directed.

All as per item No- 11 above but fixed in repair to aluminium fixed / sliding windows, aluminium ventilators, wooden wire mesh doors, PVC wire mesh doors including teak wood beading for wooden doors etc etc complete all as specified and directed.

Supply and fix for 3 mm thick sheet glass figured glass, pin head ,obscured or frosted, including teak wood beading for wooden glazing windows in square not exc 0.50 Sqm in each pane complete all as specified and directed.

Supply and fix for 3 mm thick sheet glass figured glass, pin head ,obscured or frosted, including teak wood beading for wooden glazing windows in square not exc 0.50 Sqm in each pane including hacking out old broken glass complete all as specified and directed.

Supply and fix for plain sheet glass,3 mm thick, ordinary quality and glazing and fixed including teak wood beading for wooden glazing windows in square not exceeding 0.5sqm in each complete all as specified and as directed

Supply and fix for plain sheet glass,3 mm thick, ordinary quality and glazing and fixed including teak wood beading for wooden glazing windows in square not exceeding 0.5sqm in each etc including hacking out old broken glass all as specified and directed.

Supply and fix for plain sheet glass,4 mm thick, ordinary quality and glazing alu windows and fixed with aluminium glazing clips exceeding 0.5sqm in each complete all as specified and as directed

Supply and fix for plain sheet glass,4 mm thick, ordinary quality and glazing aluminum fixed /sliding windows and fixed with aluminium glazing clips exceeding 0.5sqm in each including hacking out old broken glass all as specified and directed.

Supply and fix for plain sheet glass, ,5.5mm thick, ordinary quality and glazing doors and fixed with aluminium glazing clips in square exceeding 0.5sqm in each complete all as specified and as directed

Supply and fix for plain sheet glass, ,5.5mm thick, ordinary quality and glazing doors and fixed with aluminium glazing clips in square exceeding 0.5sqm in each including hacking out old broken glass all as specified and directed.

M&L for 6mm thick prelaminated decorative grade 1 (with BWR resin) with decorative face veneers on one side and other side white; and fixed to doors shutters and Partitions etc and fixed with aluminium glazing clips etc complete all as specified and as directed

Ditto- all as per item No- 22 above but fixed in repair to aluminium Partitions and Aluminium doors etc complete all as specified and directed.

M&L for 9 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work and aluminium Partetions and Aluminium doors including fixed in repair complete all as specified and as directed

Supply and fix for 2nd class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified.

Supply and fix for 35 mm thick 2nd class Hard wood rail and style of Plain framed, panelled shutter panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.

Supply and fix for 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides covered with decorative both face veneer with lipping / frame to match complete all as specified.

Supply and fix for 35 mm thick 2nd class hardwood factory made Glazed and skeleton fully and partially door shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), any numbers edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified.

Supply and fix for 30 mm thick 2nd class hardwood factory made Glazed and skeleton windows,ventilators, etc, open rebated and prepared to receive glass, gauze, etc. (with sash bars), any numbers edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (b); supplied and fitted to chowkats complete all as specified.

Supply and fix in repair for aluminium powder coated tubular fancy type curtain rail/ drapery rod with and including two nos of bracket/holders suitable for drapery 28mm dia rods of one window / door openings etc complete all as specified and as directed.

Supply and fix for solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawingcomplete all as specified and directed

Supply and fix for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed

Supply and fix for 75mm size, SS Butt hinges heavy duty, , and fixed complete all as specified and directed

All as per ser item No 33 above but fixed in repair complete all as specified and directed.

Supply and fix for 125mm size, SS Butt hinges heavy duty, , and fixed complete all as specified and directed

All as per ser item No 35 above but fixed in repair complete all as specified and directed.

Supply and fix aluminium handles cast type anodised for 100 mm complete all as specified and directed

All as per ser item No 37 above but fixed in repair complete all as specified and directed.

Supply and fix aluminium handles cast type anodised for 150 mm complete all as specified and directed

All as per ser item No 39 above but fixed in repair complete all as specified and directed.

Supply and fix for aluminium, anodised barrel tower bolts of extruded section and fixed for 150 mm length complete all as specified and directed

All as per ser item No 41 above but fixed in repair complete all as specified and directed.

Supply and fix for aluminium, anodised barrel tower bolts of extruded section and fixed for 200 mm length complete all as specified and directed

All as per ser item No 43 above but fixed in repair complete all as specified and directed.

Supply and fix for Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed of length of bolt 300mm complete all as specified and directed

All as per ser item No 45 above but fixed in repair complete all as specified and directed.

S&F in repair 2nd class HW Plain fillets. square, rectangular or triangular in section exc 13 but n exc 25 Sq.cm, bullnosed, splayed, chamfered or rounded on one edge or face fixed with nails and screws etc complete all as specified and as directed.

M&L for 25mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination and 6mm thick 1st class teak wood beading around the shutters and any other balance portion 1mm thick decorative tape fixed with favicol, fixed with screws to timber frame work for shelfs etc including fixed in repair complete all as specified and as directed.

M&L for 12 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination and 6mm thick 1st class teak wood beading around the shutters and any other balance portion 1mm thick decorative tape fixed with favicol, fixed with screws to timber frame work for shelfs etc including fixed in repair complete all as specified and as directed.

S & F for 30 mm Width of flaps (when open) Continuous (piano) hinges, brass, bright finish or electrogalvanised

Supply and fix for 75mm size,Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed

Supply and fix for Hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws for 150 mm size complete all as specified and as directed.

Supply and fix for Brass handles, cast type, polished bright handles 75mm long fixed to plywood or frame complete all as specified and directed

Supply and fix for Ball catches/ magnetic and connected plate fixed to shutter and frame as per sample complete all as specified and directed

Taking down cement plaster from stone/brick walls including racking out joints for keys and scrubbing down with water etc, complete all as specified and directed.

Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaes in CM (1:6) and finised even and smooth (without using extra cement) complete all as specified and directed

Material and Labour for 15mm thick Rendering on fair faces of brick work or concrete surfaces in CM (1:4) using with WPC @ 3% by wt of cement complete all as specified and directed. ( Note : WPC shall be measured and paid separately)

Supply only Integral water proofing compound complete all as specified.

Material and labour for preparation of new plastered wall surfaces and applying two coats of Interior emulsion /distemper oil emulsion over a coat of primer including applying avarage one coat of wall care putty, complete all as specified and as directed.

Material and Labour for Preparation of new surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as per manufacturer instruction

S&F in repairs Door closer hydraulically of Aluminium (extruded section body) regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

Material and Labour for 12-15 mm thick of any shade (table rubbed and polished) laid and jointed in flooring strips, step type window cills and jambs etc of green Marble over and including 15mm thick screed bed/ backing coat in CM 1:6 complete all as specified and directed

Material and Labour for Preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F 12mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, 450mm long SS Handle with bottom brass lock, drilling holes required including Hacking out old broken glass.complete all as specified and as directed.

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed

Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish off the premises out side MD land all as specified and as directed.

Material and Labour for Non- skid pin haded ceramic coloured tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6.complete all as specified and directed

Material and Labour for glazed ceramic coloured design tiles 450x300mm x 7mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat of CM 1:4 etc complete all as specified and directed

Material and Labour for 10 mm thick rendering in CM (1:4) on ceiling on soffits and finised even and smooth (without using extra cement) including taking down old ceiling plaster etc complete all as specified and directed

Material and Labour for Preparation new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

Ditto all as per item No-70 above but one coat of white wash on old decorative surfaces of ceiling complete all as specified and directed

Material and Labour for applying average one or more coat of wall care putty on existing walls to make surface even and smooth includiing removal of existing putty surface etc complete all as specified and directed.

Material and Labour for preparation of decorated plastered surfaces of walls including cleaning with wire brush with water, scrapping down smoke soot, pencil/ pen markes, remove oil cut grease spots Washing, rubbing down and stopping of exsting surface of OBD etc and applying one coats of interior emulsion/ distemper oil emulsion on walls etc complete all as specified and directed.

All as per ser item No 73 above but two coat of interior emulsion/ distemper oil emulsion on old decorative surfaces of walls complete all as specified and directed

Material and Labour for Preparation old plastered surfaces of walls including cleaning with wire brush with water, scrapping down smoke soot, pencil/ pen markes, tradig oil cut grease spots etc and applying two coat of white wash complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of wall and applying antifungal treatement as required and applying one coats of 100% acrylic emulsion paint and filling crack with crack seal or white cement and including necessary scaffoldings etc complete all as specified

M & L for Preparation of old steel painted surfaces of any description over 10 cm width or girth not otherwise described and applying one coats of sysnthetic enamel paint complete all as specified and as directed.

M & L for Preparation of old wooden painted surfaces of any description over 10 cm width or girth not otherwise described and applying one coats of sysnthetic enamel paint of wood and wood based materials complete all as specified and as directed.

Supply and fix velcro type neylon wire mesh including velcrow tape manual roller up,hydro fabrication system including male and female attachment stiched to mesh and /fixed to wooden frame and including removal of existing of any type mesh complete all as specified and as directed.

Supply and Fix for 20 mm outer dia 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and composite pressure pipes including all Crimp type internal sealing Planstic metal Composite fittings (such as elbows, tees, reducers, couplers, short pieces, connectors, etc.) and hooks (in case of concealed pipe work)/ clamps (in case of exposed pipe work) etc complete all as specified. having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors and including taking down old existing Pipe (any type ) necessary scaffoldings upto G+8 etc complete all as specified.

Material and Labour for Cleaning and removal of all scale, dirt,mud and any foreign material and removing accumulated silt etc from RCC/PVC tank and from mouth for circulating pipes of any dia etc. repairs to minor cracks stopping leaking of inlet/outlet pipe by tightening of joints and alike and making joints leak proof of capacity of tank exceeding 250 Litres and not exceeding 1000 Litres all as specified including marking with white paints up to height of G+8 stories and directed by Engineer in charge. Note: Marking of Date of cleaning and Due Date with stencil with white paint

Supply and Fix in repair for 20mm bore Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified.

-do- all as per tem No 45 above but 25mm dia.complete all as specified and directed.

S&F in repairs EWC Vitreous China wash down water closet pan (pedestal pattern), white/ coloured (excluding fixing bolts, flushing cistern and flush pipe) but incl heavy duty seat cover complete set complete all as specified.

Supply and Fix in repair for low level flushing cystern 10 ltrs capacity body moulded from virgin quality high impact poly propoliyone and functional parts moulded from engneelicy grade ABS nylon and nylon glan of white / coloured complete incl brackets and 15mm bore 450mm long PVC connection all as directed.

Supply and fix in repair vitreous china wash hand basin (flat back or angle back type) of size 630x450mm including cutting for and pinning in ends of MS brackets of 30 cm length or erecting stand including 15mm dia CP Pillar cock, 32mm dia 1mtr PVC pipe and chromium plated waste coupling with check nuts complete all as specified and as directed.

S&F PVC connections 15 mm size with PTMT nuts of length 600mm all as specified and as directed. .

Supply and Fix in repair for Fancy type CP stop/angular cock 15mm dia cast copper alloy, chromium plated fency type screwed down high pressure with half turn of capstan heads, screwed both end for iron pipe or for unions and fixed. complete all as specified and directed .

Supply and Fix in repair for Fancy type CP bib taps 15 mm dia ,chromium plated cast copper alloy with half turn type capstan heads, long/ short bodys screwed down screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed

Supply and Fix for in repair pillar taps, 15mm fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe of bore of pipe fixed all as specified and as directed.

Supply and Fix in repair for 125 mm dia Fancy type brass CP shawer rose all as specified and as directed by Engineer-in-Charge. complete all as specified and directed .

Supply and Fix in repair for tubular towel rail, brass CP 20mm dia, 'D' type, 60cm long between flanges made of brass chromium plated complete all as specified and as directed.

Supply and Fix in repair for PVC health faucet (ABS) with rubit cleaning system 1.25 m long, PVC flexible tube and ABS wall hook complete all as specified and directed.

Supply and fix stainless steel sink with drainage board kitchen bowl size 410 mm x 330 mm x 160 mm and overall size of 915 mm x 460 mm with drain board etc made out of 1 mm thick steel with plug and washers and waste pipe including bedding in cement mortar on to dwarf wall including fixing cantilever cast iron brackets and connecting union to 1mtr long waste pipe and 40mm waste coupling etc., all as per manufacturer's instructions including taking down old drain board of any size and taken as credit complete all as specified and as directed.

S&F plastic water closet seat cover, white/ coloured closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device as in repairs complete all as specified and directed

S&F in repairs for 15mm dia Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed

Supply and fix in repair for aluminium powder coated tubular fancy type curtain rail/ drapery rod with and including two nos of bracket/holders suitable for drapery 28mm dia rods of one window / door openings etc complete all as specified and as directed.

Supply and fix stainless steel plate rack kitchen 1 mm thick of size 75 cm x 95 cm with racks and shelfs including complete fixing arrangements as per manufacturers instructions and taking down the old stainless steel plate rack and taken as credit complete all as specified and as directed.

Supply and fix cabinet mirror of size 335x140x430mm with approved colour complete including necessary fixing arrangements and taking down the old mirror and taken as credit complete all as specified and as directed. Make -Water Tech

Supply and fix in repairs grating/ round 140 mm dia of Make PTMT (minimum wieght 50 gms) complete all as specified and as directed.

S&F in repairs 150mm long Floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed

GK ENTERPRISES (BID ID -3378790)