Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹13.4 LAccepted-AOC PART III GANESH MURTHI NAGAR CAPT PRAKASH PETHE MARG CUFF PARADE ROAD COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | 1 | Accepted-AOC The lowest tenderer | |
| 2 | 2₹18.3 L+₹4.9 L (37.0%)Rejected-Finance 46 HUSENI LAKDA BAZAAR 242 BELLASIS ROAD MUMBAI 400008 | MUMBAI | MAHARASHTRA | 400008 | 2 | Rejected-Finance Not the lowest tenderer | |
| 3 | 3₹19.4 L+₹6.1 L (45.3%)Rejected-Finance | 3 | Rejected-Finance Not the lowest tenderer | |
| 4 | 4₹21.5 L+₹8.1 L (61.0%)Rejected-Finance NOT AVAILABLE | FARIDABAD | HARYANA | 121004 | 4 | Rejected-Finance Not the lowest tenderer | |
| 5 | 5₹21.7 L+₹8.3 L (62.4%)Rejected-Finance | 5 | Rejected-Finance Not the lowest tenderer |
Tender Value
Refer Docs
EMD Value
₹70,000
Closing Date
21 Dec 2020, 3:00 pmClosed
GE (NW) Navy Nagar
GE NW NAVY NAGAR COLABA MUMBAI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI
REPAIR TO FLOORING RAILING STAIRCASE OF COMMON AREA JOINERY PLASTER PLUMBING AND SANITARY WORKS AT NEW NAVY NAGAR UNDER AGE BRI OF GE NW NAVY NAGAR COLABA MUMBAI
2020_MES_397650_1
8425/E8
Open Tender
Civil Works
Item Rate
270 days
GE (NW) Navy Nagar, Colaba
Class D and category a(i)
7 documents required · 7 mandatory
₹500
GE (NW) Navy nagar
₹70,000
2 Jan 2021
24 Nov 2020
22 Dec 2020
24 Nov 2020
21 Dec 2020
8 Dec 2020
24 Nov 2020 - 14 Dec 2020
Amount
Taking down cement plaster of any description including racking out joints hacking for key scrubbing down with water & remove debrises out MD land.
M & L Applying one coat of Rust remover and rust passivator on exposed reinforcement surfaces at any height all as specified and dirceted. Make :- Pidiite fosroc or equivalent
M&L rendering 15mm thick in CM (1:6) on wall finished even and fair without using extra cement as in patches all as specified and directed by Engr -in- Charge.
All as per item No 3.00 above but 10mm thick in CM (1:3) in ceiling
M&L for preparing newly plastered surfaces of wall and applying three coats of white wash
All as per item No 5.00 above but on ceiling.
M&L for preparing newly plastered surfaces of wall and applying two coats of oil bound emulsion distemper over a coat of primer all as specified and as directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
S & F Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding layer in CM 1:6 complete all as specified
S&F Glazed colour ceramic tiles in vertical surfaces 300 x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering as backing layer in CM 1:4 complete
Taking down chowkhats or frames but with shutters (without taking off shutters from the frames ) n.exc 1.5 sqm each
S & F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing
Cutting holes in brick walls but in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement lime mortar in cm 1:2;4 type B-1 not exceeding half brick as required depth of embedded portion of holdfasts
M & L MS works in holdfast made of Fe -290 of length
S & F Aluminium, anodised, barrel tower bolts of extruded section and fixed 150 mm length.
S & F Aluminium handles, cast type, anodised of length 150 mm
S&F 100mm size stainless steel medium weight butt hinges all as specified.
Demolition of Plain cement Concrete of any description and in any position not otherwise specifically provided for including china mosaic & wc
M&L for roughening the surfaces of old cement concrete floor by picking, cleaning and washing down with water to remove dust etc. rendering 15 mm thick in CM 1:3 mixed with water proofing compound and applying two coats of hot bitumen 85/25 grade @ 1.70 Kg/Sqm over vertical sides of sunken floors. (Note : WPC shall be measured and paid seperately)
M&L cement concrete 1:7:12 with with 40mm graded stone coarse aggregate in sunken floor all as specified and directed.
Supply only water proofing compound.
S & F in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe ) including trap set in and including concrete including provision of lime concrete bedding
S &F in repairs Cast iron nahani trap 100 mm dia with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4)
Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15cm thickness below or above ground level.
M & L Cement concrete type B-1, 1:2:4 (20mm graded aggregate) 40 mm thk in flooring, all as specified and directed
Demolition brick work built cement mortar in any description any position complete.
M&L brick work with sub class `B' bricks straight or curved on plan to n exc 6 mtr mean radius built in CM 1:6.
S & F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples to wooden/aluminium frames complete all as directed and as specified
Hacking out broken glass panes of any description from wooden frames fixed with beads.
S&F 4mm thick pin headed type ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame.
S&F in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm excluding taps, wastes, chain and plug and porcelain but including brackets
S & F in repairs 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.
S & F in repairs 15 mm bore Bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.
S & F 15 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., laid in floors, walls etc. Including taking down old pipe etc
S & F in repairs 10 litres PVC Syphonic action type, Flushing cistern low level, white with inlet ball valve float and handle inclbrackets complete.
M & L 32 mm dia waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms)
S & F in repair PVC connectors of 15 mm size with PTMT nuts of length 600 mm length
S & F PVC waste pipe of 32 mm dia 800 mm length
S & F in repairs Pillar taps of 15 mm dia , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed
Unitech Enterprises
Diamond Construction
ASHOK CONSTRUCTION
RAJU AND CO
I.J Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .