Repairing and Painting of Project Hospital and fire Control Room at Khairi, CPS-1

Dismantling tiled floors laid in mortar upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres lead wooden/concrete joists to be measured and paid for separately): For thickness of tiles upto 25mm

Repairs to plaster in patches of 2.50 Sq.M. and under and 10 to 15mm thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within a Lead of 20 : Cement Mortar 1:4 (1 Cement : 4 Sand)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600 X 600 mm

Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.

Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.

Wall painting(one coat)with plastic emulsion paint of approved brand and manufacture on decorated wall surface to give an even shade including thoroughly brushing the surface clean of all dirt grease,loose pieces of scale

Extra over item No 17181000 and 17182000 ( Item No.8) for every sub sequent coat of wall painting with plastic emulsion paint of approved brand and manufacture.

Extra over item for painting with plastic emulsion paint of approved brand and manufacture on ceiling and/or sloping roof

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete.

Painting one coat (excluding priming coat) on previously painted steel and othermetal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt,dust and other foreign matter :- With Enamel paint other than white (Asian/ Berger/ Nerolac)

Extra over item No.12 for every subsequent coat of paint.With Enamel paint other than white.

Finishing wall with water proofing cement paint (one coat) of appoved brand and manufacture.

Brick work using common burnt clay building bricks in foundation and plinth in :- Cement Mortar 1:4 (1 Cement : 4 Sand) Second Class Bricks

Extra for brick work in: Super-structure above plinth level upto floor two level (Second Class Bricks).

15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:4 (1Cement:4 Sand).

ROSHAN LAL THAKUR

manohar kumar sharma

M/S aastha constraction company

SHAM LAL SHARMA