Reconstruction Of Storm Water Drain and Providing Fencing To The Gandhi Nagar Toilet in Ward No.53 in East Zone

Cleaning the existing toilet septic tank using sullage lorry as per direction of departmental officers etc.complete

Dismantling the old Damaged Cement Concrete as per the instruction of Dept officers

Dismantling the old Damaged Brick Work as per the instruction of Dept officers

Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.

Cement concrete 1 : 4: 8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed.

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3.60m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification (Sl.No.134)

Supplying and Fixing of barbed wire fencing using stone size of 0.15x0.15 to an of 2.10m below 0.60m and above 1.80 with necessary support and barbed wire - 10 gauge 2 ply 4 pronged (Galvinised) of 5 row horizontally and 6 nos vertically to ht. of 1.85m to 0.40, 2.4m C/c for 10 Rmtr including earth work, PCC 1:2:4 mix tying the wire with 7 nos size 0.15x0.15x2.10

Supplying and fixing PVC door frames using section 405 (4.5X4cm) including inserting 20X20mm country wood all-round, fixing in masonry with necessary wooden plugs and fixing the frame using stainless steel screws in wooden plug, complete – Matt finish

Supply and fixing and position of MS doors with single leave. The door outer frame will be 40x40x6mm MS angle, the shutter frame will be 35x35x6 mm, MS angle intermediate stiffner will be 35x35x6 mm with cross stiffner 25x 25x5 mm flats covered with 18 gauge M.S. sheet with necessary hinges, tower bolts, aldrop length 30mm and hold fast etc., complete with one coat red oxideprimer.