PROVN OF OVERHEAD SHED FOR EXPENDIENTS AND DRAIN AND HARD STANDING OF BLDG NO SM- 152/A AT DENNIS ROAD AT MCTE UNDER GE (MCTE) MHOW

Amount

Item No.1 M&L for excavating in trenches, not exc1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out,in any type of soil,complete all as specified & directed.

Item No.2 M&L for Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm depth in make any type of soil, complete all as specified and as directed .

Item No.3. M&L for removal of excavated material (soil) to a distance not exc. 50m & depositing where direceted at a level not exc. 1.50m above the starting point, complete all as specified & directed .

Item No.4 Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft /loose soil, including watering, and removing surplus soil to a distance n exc 50m and making good surface, complete all as specified & directed .

Item No.5 M&L for PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete etc, complete all as specified & directed.

Item No.6 M&L for Plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in floors, foundations, filling & mass concrete, complete all as specified and directed.

Item No.7 M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering ,complete all as specified and directed .

Item No.8 M&L for brickwork in CM 1:6 with subclass 'B' bricks (old size) of class designation 75, straight or curved on plan exc. 6m mean radius, complete all as specified and directed.

Item No.9 . M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:6 ) and finishing the surfaces even & smooth without using extra cement, complete all as specified .

Item No.10 M&L for preparation of new plastered surfaces of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces ,complete all as specified and directed.

Item No.11 S&F, Precast PCC kerb stone of size 300 x 300 x 150mm of M-20 grade; size, shape, pattern & finishing as approved by the Engr-in-Charge, including rounding,chamfered or half round; and laid to perfectly levelled surface jointed and pointed in CM 1:4 such that not more than half of the depth is burried in ground, (the width of kerb stone shall be 150mm) including all necessary excavation, earthwork & removal of spoil, and including providing two coats of road marking paint on the kerb stones, complete all as specified & directed.

Item No.12 M&L for 75mm thick cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate), in sub base of floors, complete all as specified & directed.

Item No.13 M&L for 50 mm thick Cement concrete type B2, 1:2:4 (using 40mm graded stone aggregate) in sub base of flooring/ hard standing, including finishing surface even and smooth without using extra cement, complete all as specified and directed .

Item No.14 S&F, 80 mm thick M-40 grade machine pressed precast concrete interlocking paver blocks of any shape & size conforming to IS 15658-2006, jointing with grey cement & pigment, ( design, pattern & colour as approved by Engr-In-Charge), laid over 50mm thick sand cushioning, complete all as specified & directed. (Notes : Sand cushioning shall be measured and paid for separately only )

Item No.15 M&L for Sand cushioning under interlocking paver blocks including levelling and consolidation complete all as specified and directed .

Item No.16 M&L for Providing cement concrete, 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in coping or mud stops,gola, rounded or chamfered on edges including necessary from work all as specified and directed.

Item No.17 M&L for Machine cut mirror polished kota stone slab of size 600 x 600 flooring 20-25mm thick laid over and including 15mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

Item No.18 M&L for Machine cut mirror polished kota stone slab 20-25mm thick thick, on vertical surfaces as in riser of steps, skirting, dado and pillar laid over and including 15mm thick rendering in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

Item No.19 M&L for RCC 1:1.5:3 type B-1 using 20mm graded aggregate as in foundation, including rafts, footings, foundation and beams, plinth beams, bases for columns, etc; basement slabs, under reamed piles and mass concrete all as specified and directed.

Item No.20 M&L for RCC type B-1, 1:1.5:3 using 20mm graded agg as in beams, cantilevers, lintels, over 1.5 m span. all as specified and directed

Item No.21 M&L for RCC type B-1, 1:1.5:3 using 20mm graded agg as in columns, pillars, piers, posts and struts. all as specified and directed.

Item No.22 M&L for formwork to sides and soffits of lintels, lintel band, beams etc finished rough surfaces of concrete complete all as specified.

Item No.23 M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or batter, finished rough surfaces of concrete, complete all as specified and directed.

Item No.24. M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular finishes rough surfaces of concrete.etc finished rough surfaces of concrete, complete all as specified and directed.

Item No.25. M&L for mild steel TMT reinforcement bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Item No.26. M&L for Mild steel TMT bars of dia upto 10 mm, in stirrups, spacers and binders, cut to length, bent to shape required, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as specified and as directed.

Item No.27. S&F mild steel rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates using Fe-290 (Gde E-165), complete all as specified & directed .

Item No.28. M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:4 ) and finishing the surfaces even & smooth without using extra cement, complete all as specified .

Item No.29. S&F rolled mild steel Plates (chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, conforming to Fe-290 (Gde E-165), complete all as specified .

Item No.30. S&F, Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.50mm thick, of any colour (as approved by the Engr-in-Charge), having tensile strength of 550 MPa, as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified & directed

Item No. 31. S&F, Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified & directed

Item No.32. M&L for Preparation of new iron and steel surfaces of any description over 10cm in width or girth, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed .

Item No.33. Excavating over areas, not exceeding 1.5 m deep and getting out in any type of soil, complete all as specified & directed .

Item No.34. M&L for pre polished cement concrete Chequered tiles 30cm x 30 cm x 25 mm thick, machine pressed, and cut, jointed and pointed in neat slurry, in floors, laid over and including 20 mm thick screed bed in cement mortar 1:6, complete all as specified.

Item No.35. M&L for excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in hard /dense soil , complete all as specified & directed.

Item No.36. M&L for Providing Cement Concrete 1:2:4 type B2 (using 20 mm graded stone aggregate) as in surface channelss drains and benching, including finshing fair and smooth using extra cement, complete all as specified and directed by Engineer-in-Charge. ( Note : forming fair finished channel shall be measured and paid separately.)

Item No.37. Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete,using extra cement,including form, moulds, mitred/ stopped ends etc complete all as specified & directed.

Item No.38. M&L for cement concrete cast-in-situ 1:3:6 type C-1, (using 20mm graded stone aggregate) as in coping, bed plates, including necessary form work and finishing the exposed surface of concrete, weathering, slightly rounded or chamferred angles and throating, complete all as specified and directed.

E&M ( INTERNAL WIRING )

Item No.39. Point wiring with 1.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cable in and including rigid non- metallic PVC concealed/surface conduit of suitable size medium grade ISI marked complete , including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FR LSH copper conductor connected to all fittings, common earth and connected to earth dolly including modular metal/PVC flush box of suitable size , modular cover plate and modular cover frame of suitable size all fittings and accessories and making good disturbed surface of walls and floors etc. complete all as specified and directed for the following:- Make of cable - Havells / Finolex / RR Kabel Ltd. / L&T Make of PVC Conduit( FRLS) - Presto Plast / Finolex / Jindal / Asian / AKG

Item No.39 (a) One light/fan point controlled by one switch

Item No.39. (b) One socket outlet 2/3 pin 5 amp, multipurpose on SAME BOARD with other switches

Item No.39. (C) One switch/socket outlet point 2/3 pin 5 amp multipurpose on independent board

Item No.40 All as per Item No 39 above, but with FRLSH cable 2.5 sqmm stranded copper conductor for switch/ socket outlet 5 Pin,15 Amps multipurpose controlled with 2.5 sqmm copper conductor FRLSH cable as continuous earth wire of green colour on independent board. Make of cable - Havells/ Finolex/ RR Kabel Ltd./ L&T Make of PVC Conduit (FRLS) - Presto Plast/ Finolex/ Jindal/ Asian/ AKG

Item No.41 Supply and fix switch piano flush type, 5 amps, 230V AC, single pole, one way, complete all as specified & directed.

Item No.42 Supply and fix, switch piano flush type 15 amps, 230V AC single pole one way, complete all as specified & directed.

Item No.43 Supply and fix, socket out let multipurpose suitable for 2/3 pin 5 Amp flush type, complete all as specified & directed.

Item No.44 Supply and fix, socket out let 2 in 1, multipurpose suitable for 3 pin 5/15 Amp flush type, complete all as specified & directed.

ItemNo.45 Supply and fix, ceiling rose, 3 phase, polycorbonate isolated body for surface type, three terminals, complete all as specified & directed

ItemNo.46 Supply and fixing 20W LED 6500K lights fitting Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories all as specified and directed. Make : Havells LHEXACP7UN1W020 or equivalent make of Bajaj/ Philips/ syska/ Crompton.

Item No.47 Supply and fix, double door SPN DBs 8 ways of powder coated DB's suitable for MCB's fitted with bus bar, Neutral link, Earth bar and Din ral complete. Indo-Asian cat part No 811806 or equivalent Make in Bajaj, Philips/ Crompton.

Item No.48 Supply and fix MCB SPN 6 to 32 amps 10 KA, 'C' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed by Engr-in-Charge. Make : Indoasian or equivalent in Crompton/ L&T/ ABB/ Scheider

Item No.49 Supply and fix MCB SP 6 to 32 amps 10 KA, 'B' series including connection with suitable size aluminium /copper lugs complete all as specified and directed by Engr-in-Charge. Make : Indoasian or equivalent in Crompton/ L&T/ ABB/ Scheider

Item No.50 M&L for Sub main wiring in repairs with two runs of single core FR PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including concealed/ surface non metallic rigid PVC conduit of not less than 25mm dia including one run of PVC insulated unsheathed 4 sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed/surface wiring system by cutting of wall and making good disturbed surface of wall all as specified and directed. Note:- Two runs of 4.00 sqmm cable, one run of 4.00 sqmm cable and one run of PVC conduit will be measured as

Item No.51 Sppply & Laying XLPE insulated, armoured, electric cable of size 10 sqmm 2 core with aluminium conductor, 1100 volts grade, laid in trenches, fixed on poles/ walls or passing through pipes including provision of necessary lugs and glands & making necessary connection including taking down old unservicable cable of any core complete all as specified and directed, for the following :- Make : Havells/ polycab/ Finolex/ RR Kabel Ltd.

Item No.52 Supply laying and jointing GI pipe 'light grade' 40mm bore in trenches/ under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings complete all as specified and directed.

Item No.53 M & L for clean and dry sand (un washed) in trenches incl spreading and levelling for cushioning of UG cable complete all specified and directed. (Note:- Thickness shall be measured after punning)

Item No.54 M & L for brick size sub class ‘B’ (modular size), laid flat in trenches for protection of cable complete all as specified and directed.

Jamna Constructions

M/S Ashish Construction

sunway associates