Major repairs to 50,000 GPH x 122 mtrs. Head x 225 HP HC pump set along with allied works at CPS Paloura Stage II

Amount

Major repairs to 50,000 GPH x 122 Mtrs. Head x 225 HP HC pump set along with allied works at CPS Paloura Stage-II. The job includes decoupling of pump and motor by unfastening of coupling bolts. Dismantling of pump from base frame and shifting to workshop using crane, manual labour, other tool and tackles. Dismantling of pump and repair to the pump shaft by welding, turning and machining to bearing size, Providing and fitting of impeller in place of damaged impeller along with impeller guide rings. Fabrication / providing and fitting of shaft protection sleeves and body bushes, Neck rings 02 no’s , bearing bushes 02 no’s , New bearings at NDE & DE. chuck nut 01 no’s. Assembling of the pump. Repair to the pump body, providing and fitting of bolts, nuts, packing material and grease etc. Fabrication / providing and fitting of CI coupling pulley as per sample along with coupling bolts and rubber bushes. Shifting back to site. Job also includes repair to the Sluice valves on delivery line by way of dismantling it from delivery line of the HC pump and then shifting to the workshop and replacement of damaged rod and flap from the sluice valves (01 No,s) then providing and fitting of new threaded rod and chuck nut and new flap .then re-fitting of sluice valve on delivery line. The job also includes providing and fitting of new sluice valve 200 mm dia – 01 No. for suction line and shifting back to site. Assembling the motor and shifting back to site. Fitting of pump and motor on base frame and fastening the coupling bolts after proper alignment, greasing and providing packing material. Making necessary electrical connections and testing the pump set on full load conditions. Complete job including cost and carriage of materials, labor charges etc.

TRIKUTA ELECTRICAL AND MECHANICAL WORKS

BEE AAR ENTERPRISES