Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance 0 0 465691 | RAJGARH | MADHYA PRADESH | 465691 | Admitted-Finance |
| 2 | Admitted-Finance AT PANKI ROAD REDMA SHREE RAM PATH P O G L A COLLEGE P S DALTONGANJ DIST PALAMU 822101 | DALTONGANJ | PALAMU | JHARKHAND | 822101 | Admitted-Finance |
Tender Value
₹72.8 L
EMD Value
₹1.5 L
Closing Date
26 Aug 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Chief Engineer, Director ESG
Director, ESG, BARC, Trombay, Mumbai
Annual Maintenance of Civil and PH works at CTCRS Building, Anushakti Nagar, Mumbai for the Year 2024-25.
2024_BARC_821226_1
BARC/CSS/ET/14/2024-2025 Dated 08.08.2024
Open Tender
Civil Works
Item Rate
365 days
CTCRS Building, Anushakti Nagar
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹1.5 L
17 Oct 2024
14 Aug 2024
27 Aug 2024
14 Aug 2024
26 Aug 2024
14 Aug 2024
Amount
DISMANTLING PLAIN CEMENT CONCRETE manually / by mechanical means carefully without damaging adjacent structures including disposal of debris within 200m lead as per direction of Engineer-in-charge.
DISMANTLING BRICK WORK in cement mortar carefully without damaging adjacent structures including stacking of materials and disposal of unserviceable materials within 100m lead as per direction of Engineer-in-charge.
DISMANTLING OF RCC WORKS carefully manually without damaging adjacent structures excluding cutting of reinforcement including stacking of steel reinforcement bars and disposal of unserviceable materials within 200m lead as per direction of Engineer-in-charge.
DISMANTLING BRICK BAT COBA CEMENT BASED WATER PROOFING over roof and chajjas carefully with out damaging adjacent structures including lowering and stacking of materials and dispoal of unserviceable materials within 200m lead as per direction of Engineer-in-charge.
DISMANTLING OLD PLASTER OR SKIRTING carefully, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100m lead.
DISMANTLING TILE WORK IN FLOORS AND ROOFS laid in cement mortar including stacking material within 100m lead for thickness of tile up to 25mm etc. complete as directed by Engineer in charge.
DISMANTLING TILE WORK IN FLOORS AND ROOFS laid in cement mortar including stacking material within 100m lead for thickness of tiles above 25mm and up to 40mm.
LEAD CHARGES FOR LEAD OF DEBRIS by mechanical transport including loading, unloading, stacking / levelling etc. Notes : 1. The rates are applicable for NET Quantities arrived after making deduction for voids @ 30% from corresponding TRUCK Measurement. 2. Finding authorised ground for disposing debries, transporting of debries at disposal ground, disposing, stacking, leveling & statutory charges if any will be responsibility of the Contractor and no extra charges shall be paid for the same. The debris from identified area shall be cleared every week after accumulation of minimum one Truck Load.
Debris Beyond 4 Km but up to and including 5 Km.
Debris Beyond 5 Km for every 1KM or part thereof
Providing and laying in position CEMENT CONCRETE OF 1:3:6 (1 cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20mm) / M-10 with Minimum Cement Content 220 Kg/m3 including consolidation, finishing, curing etc. complete as per specificationsand drawings but excluding the cost of Form work shuttering, centering Complete at all levels.
Providing, centering, shuttering FORM WORK USING PVC FILM FACED PLYWOOD to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings and specifications at all levels and as directed by the Engineer-in-charge.
Providing and laying in position CEMENT CONCRETE OF 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20mm) / M-15 with Minimum Cement Content 320 Kg/m3 including consolidation, finishing, curing etc. complete as per specification and drawings but excluding the cost of Formwork shuttering, centering and steel reinforcement at all Levels.
Providing and laying in position REINFORCED CEMENT CONCRETE (RCC) OF GRADE M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or superplasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc.complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level and as directed by the Engineer-in-charge.
Providing REINFORCEMENT FOR REINFORCED CEMENT CONCRETE at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with 1.6 mm dia soft drawn annealed binding wire all labour charges, cost of cover blocks in specified grade of concrete etc. complete including cost of binding wire as per specifications and drawings. Steel Supplied by the Contractor. Using TMT bars of specified grade all dia bars to be supplied by the contractor manufactured by approved brands of BARC only Confirming to IS:1786. All test reports to be provided along with supply of materials.
Providing STRUCTURAL STEEL WORK USING ANGLES, CHANNELS, JOISTS AND OTHER SECTIONS, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Project Engineer. Up to and including 300mm Joists, 350mm channels, and below sections Using materials manufactured by approved brands of BARC only Confirming to IS:2062. Notes: 1) Structural steel required for the work shall not be supplied by the Department and the contractor has to procure the same. 2) Welding weights, connections, bolts and nuts shall not be measured for payment, but the cost of which shall be deemed to have been included in the rate. 3) All holes will be made by drilling only. Gas cutting of holes will not be permitted. 4) All test reports to be provided along with supply of materials. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. ADOR, ESAB, Indian Oxygen and D&H SECHERON or equivalent make - Welding Electrodes.
Providing and FIXING ANCHOR FASTNER of approved make including drilling in concrete as per requirement for fixing EPs or other structures all as specified by the manufacturer complete all as per specifications and drawings or as directed by Engineer-in-charge.
16mm diameter & 200 mm Long
Providing, supplying, cutting, welding, fabricating, hoisting and fixing in position structural steel members like trusses, purlins, posts etc. using MS hollow / circular / square / rectangular tubular sections including appling a coat of Zinc chromate primer of approved make all as per specifications, drawings and as directed by the Engineer in charge.
Making the OPENING IN BRICK MASONRY FOR DOOR / WINDOW / CLEAR STORY OPENING including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface including disposal of mulba/ rubbish to the nearest dumping ground.
Providing and constructing BRICK WORK in cement mortar using Standard bricks of approved quality / class, make / brand in super structure above plinth up to Floor-II level in all shapes and sizes including curing, raking out joints complete as per specifications and as directed by the Engineer-in-charge. Brickwork in super structure with standard bricks in C.M 1:4 using crushed sand.
Providing 15mm THICK INTERNAL PLASTER as back coat in cement mortar 1:4 without cement punning (using Crushed Sand) finished smooth, including sieving of sand to required fineness, preparation of the surface, scaffolding, curing all as per specifications, drawings and as directed at site complete.
Providing 20mm THICK INTERNAL PLASTERING in C.M without cement punning 1:4 (using crushed sand) finished smooth, including sieving of sand to required fineness, preparation of the surface, scaffolding, curing all as per specifications, drawings and as directed at site complete.
Providing 20mm THICK EXTERNAL PLASTERING in two coats under layer 12mm thick with C.M 1:4 (using crushed sand) finished with a top layer 8mm thick in C. M 1:3 (using crushed sand) including approved water proofing compound @ 2% by weight of cement or as per manufacturer's specifications, sieving of sand to required fineness, scaffolding up to 10m height, finishing, curing etc. complete as per specifications. and as directed by the Engineer-in-charge.
Providing 20 mm thick plastering using Ready mix external plastering compound of approved make for external faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning scaffolding up to 10 metres height complete.all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge
Providing STRUCTURAL REPAIRS IN OLD DAMAGED CONCRETE STRUCTURES / SURFACES WITH APPROVED POLYMER with following operations:- 1) Removal of loose/Spalled or damaged concrete by chipping and cleaning the concrete surface and reinforcement steel with wire brush and with water 2) Cleaning the re bars with Acetone for complete rust removal and washing with water to make the surface clean. 3) Applying protective coat / bond coat using polymer and cement in the proportion of 1; 1.5 (1 part of polymer and 1.5 parts of cement in synthetic enamel paint like consistancy with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20mm with the proportion of Cement 50 Kg : washed and dried river sand 87.50 kg : silica sand 37.50 Kg. mixed with 10 litres of Polymer (or 1 Kg cement : 1.75 kg washed and dried river sand : 0.75 Kg silica sand : 200 ml polymer) 1.00 Lit 609.00 671.005) If thickness of repair exceeds 20mm , after every 20mm thick repair, bond coat as per 2 above to be applied and further thick of repair to be continued for each layer. This work is inclusive of all materials, labour, complete all as directed at site using approved polymer suitable for structural repair shall be used) Note: Scaffolding will be paid separately under relevant item.
Providing and fixing DOUBLE TUBULAR SCAFFOLDING SYSTEM using H- frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding.
Providing and fixing 1st quality CERAMIC GLAZED FLOOR TILES of minimum 300 - 600 mm long and 300 - 600 mm wide and thickness not less than 6 mm conforming to IS 15622 of approved make in all colours and shades as approved by Engineer-in-charge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge.
Providing and fixing 1st quality CERAMIC GLAZED WALL TILES conforming to IS 15622 of approved make. shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.
Providing and laying minimum 25mm THICK UNIFORM SHADE KOTAH STONE FLOORING over 20 mm thick (Avearge) base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing in minimum three levels to obtain mirror polish complete with base cement mortar 1:4 (using crushed sand) all as per specifications, patterns and drawings complete.
Providing and Laying Minimum 25 mm thick uniform shade Kotah stone treads and risers of steps, skirting, in single length up to 2.00 metres length slab dado and pillars laid on 12 mm thick (average) cement mortar 1:3 (using crushed sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing to obtain mirror finish complete as per specifications, drawings and as directed by the Engineer-in-charge
CUDDAPAH STONE SLAB OVER KITCHEN PLATFORM etc. using 25 mm to 30 mm thick machine cut double machine polished slabs in single piece upto a maximum length of 1.80 metres laid over 20 mm thick cement mortar bedding 1:4 finished to proper levels, cured etc. complete.
Providing and fixing Minimum 15-17 mm thick gang saw cut mirror polished (Premoulded and Prepolished) machine cut GRANITE of approved colour and shade as per requirement for, vanitiy counters, Wash basin Counters, Door Frames, window sills, facias and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete as directed by the Engineer-in-charge at all levels.
Extra for providing edge moulding to 15-17 mm thick marble stone / Granite Slab counters, Vanitis etc. including machine polishing to edge to give high gloss finish et. Complete as per design approved by Engineer-in-charge.
Granite Work
Removing the damaged PVC Flooring and Providing and Fixing HOMOGENEOUS 2.00mm THICK PVC SHEET /Tile in Flooring and skirting
REMOVING THE DAMAGED PVC FLOORING carefully including removing the resins sticking on the floor, cleaning the floor carefully stacking the serviceable materials at places shown and disposing the unserviceable materials within 50 m lead at places shown complete as directed by the Engineer-in-charge.
Providing and Fixing HOMOGENEOUS 2.00mm THICK PVC SHEET / TILE IN FLOORING AND SKIRTING of approved make in approved pattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer including, levelling small undulations with plasterof paris if required, rolling with light wooden roller weighing about 5 kg all complete as directed by Engineer-in-charge in approved colour and shade
Providing and fixing GLAZED VITRIFIED FLOOR TILES in floor and dado of approved make in different sizes conforming to IS 15622 in all colours and shades in Glossy or Matt or satin finish laid over a bed of minimum 20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints with white cement based Tile Grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge
Using Tiles of approved size 600mm x 600mm
Treatment to the cracks and joints if any as directed by the Engineer-in-charge.
Cutting V groove 10 mm wide 15mm deep along with the cracks.
Sealing the Cracks with Epoxy Primer and Epoxy Putty with adhesive & hardener as per manufacturer specifications. The Adhesive shall be a low-viscosity, crystallization-resistant epoxy resin based on bisphenol-A and modified with a reactive diluent and the Hardener shall be Polyamidoimidazoline (PAI)/ "Quartz sand Mix-10". The ratio of Adhesive: Hardener:"Quartz sand Mix-10" = 100:50:800 /900 pbw. Tech Specs:-The Adhesive shall have the following properties: (i) Medium epoxy equivalent (ISO 3001) - 187 [g/eq] (ii) Epoxy index (ISO 3001) - 5.2 to 5.5 [eq/kg] (iii) Viscosity at 25°C (Falling-ball, ISO 12058-1) - 500 to 650 [mPa s] (iv) Colour (Gardner, ISO 4630) - ≤ 2 (v) Vapour pressure at 20°C (balance) - ≤ 1 [Pa] (vi) Density at 25 °C (ISO 1675) - 1.15 [g/cm3] (vii) Flash point (Pensky Martens, ISO 2719) ~120 [°C]. The hardener shall have the following properties: (i) Colour (Gardner, ISO 4630) - ≤ 10 (ii) Amine number (ISO 9702) - 370 to 410 [mg KOH/g] (iii) Viscosity at 75°C (Rotary viscosity, ISO 3219) - 300 to 600 [mPa s] (iv) H+ active equivalent ~ 95 [g/eq] (v) Density at 20°C (ISO 1675) - 0.96 [g/cm3] (vi) Flash point (Pensky Martens, ISO 2719) - ≥ 200 [°C] Note: Tentative/ suggested make for guidance of bidders: For Adhesive-Araldite GY 257 & For Hardener-Aradur XY 54 of M/s Araldite or approved equivalent.
DISMANTLING DOORS, WINDOWS AND CLEAR STOREY OPENINGS (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100m lead (full windows) of area 3.00 Sq.M and below.
DISMANTLING DOORS, WINDOWS AND CLEAR STOREY OPENINGS (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100m lead (full windows) of area beyond 3.00 Sq.M.
DISMANTLING ALUMINIUM / GYPSUM PARTITIONS, DOORS, WINDOWS, fixed glazing and false ceiling including disposal of unserviceable surplaus material and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-charge.
LABOUR CHARGES ONLY FOR RETRIEVING WOODEN DOOR SHUTTERS FROM FRAMES (Chowkhat) of various sizes, modifying, taking out damaged ply from the doors, replacing/bonding 3mm thick marine ply with suitable synthetic resin, plywood, including cost of fevicol, synthetic resin, tools, tackles, nails, screws etc. all complete and refixing the same after complete repairs, re-sizing & refixing fittings, fixtures such as tower bolts, aldrop, door handle, baby latch, mortice locks, night latch, hinges etc. (shall be paid separately under relevant item of this tender schedule ) etc. all complete for shutters including minor repairs to chowkhats, architraves, etc. as per site conditions and as directed.
Door frames with shutter of sizes up to 3 Sqm.(Single shutter)
Door frames with shutter of sizes above 3 Sqm.(Double shutter)
Providing WOOD WORK IN FRAMES OF DOORS, WINDOWS, CLEAR STORY OPENINGS and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing,making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick, 200 mm long / with coach screws including protective painting to the suface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-charge. Using Second class teak wood only.
Providing and fixing 35mm THICK FLUSH DOOR SHUTTERS conforming to IS : 2202 non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with internal teak wood lipping 25mm wide and fixing with 4 Nos of 125 mm long Stainless steel Hinges with S.S. wood screws complete.
Providing LOUVERED OPENING IN DOOR SHUTTERS including making the opening, providing & fixing teak wood louver blades with necessary teak wood frame work & beading & applying one coat of approved wood primer etc. complete.
Providing VISION PANEL not exceeding 0.1 sqm in all type of flush door including fixing 4 mm Clear Glass with necessary teak wood Beadings complete all as per specifications and as per Drawings.
Providing and fixing Heavy Quality MECHANICALLY OPERATED GUIDED CHANNEL WITH FITTINGS COMPLETE FOR SLIDING DOOR including roller wheel, stoper, guiding-pin etc complete of approved make as per specifications and as directed by the Engineer-in-charge.
REPAIRING AND REFIXING IN POSITION THE EXISTING DAMAGED HYDRAULIC DOOR CLOSER (heavy duty No.3) involving following operations: i) Complete dismantling including removal of clamp bolt, main arm, top nut, ratchet, notch plate, removal of split oil, brass regulatory screws, spring etc. ii) Providing and fixing approved make (Confirming to I.S.35640) bottle type door closer spring for heavy duty door closer No. 3 brass regulatory spring No.1 Part No.1 machine oil (approx. 100 ml.) etc. Note.:- 1) The door closer repaired and spares replaced are to be handed over to Maintenance Unit for accounts. 2) The Agency may inspect the condition of door closers in premises prior to quoting. 3) The repairing and spares replacement shall stand for guarantee of six months trouble free operation with replacement of spares if any, defect occurs the same shall be attended by the Contractor.
Supplying, providing and fixing DOOR CLOSER of approved equivalent make with necessary screws, fixing to the aluminium/glass/wooden door complete as per specifications including all labour, transporting charges etc. & as directed by EIC. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. TS 71-of DORMA make or equivalent make
Providing and fixing ALUMINIUM HANDLES 175mm LONG INNER GRIP 125mm WITH 12mm DIA ROD PLATE TYPE BOW HANDLES ISI marked of approved make, anodised transparent or dyed to req. colour or shade with necessary screws etc. complete.
Providing and fixing STAINLESS STEEL TOWER BOLTS OF SIZE 250mm X 12mm of approved make with necessary screws etc.all as per specifications and as per drawings.
Providing and fixing STAINLESS STEEL ALDROPS OF SIZE 300mm X 14mm of approved make with necessary screws, bolting from rear side complete as per specifications complete.
ONLY REPAIRING OF LOCK of mortise / Knight / Neki or alumunim door lock, including removal & refixing of locks with proper as per existing.
Providing and fixing 4 LEVER MORTICE LOCK of approved make suitable for aluminium sections.
Providing and fixing 6 LEVERS MORTICE LATCH AND LOCK of approved make and a pair of handles Inside opening Left / Right with necessary screws etc complete suitable for fixing in wooden / steel/ FRP/ doors as per specifications.
Providing and fixing ANODISED ALUMINIUM BABY LATCH of size 75 X 12 mm ISI marked of approved make transparent or dyed to required colour or shade with necessary screws etc.
Providing and fixing ALUMINIUM HANGING HEAVY QUALITY FLOOR DOOR STOPPER ISI marked with twin rubber stoppers, anodised transparent or dyed to required. colour or shade with necessary screws etc. complete.
Providing and fixing IS:12817 marked stainless steel BUTT HINGES of size 125 x 64 x 2.5 mm (heavy weight) of approved make with suitable SS screws etc. complete as directed by Engineer in charge..
Supplying, providing and fixing STAINLESS STEEL-304 D-HANDLES (MATT FINISH) OF LENGTH - 300mm, DIAMETER-25mm, suitable S.S. flange , S.S. cap and thickness 16 Guage thickness to brick Walls, R.C.C. surface, Wooden doors etc. including drilling, S.S. Screws of 30mm long ( 6 Nos for each handle) ,cost of labour, tools, tackles ,wooden gutties, plants, transportaion, scaffolding etc. all complete as per site requirement and as directed by Engineer in charge.
Providing and fixing WATER PROOF MARINE PLY (Kit ply, Anchor ply or approved equivalent make) the rates are inclusive screws, washers etc complete providing and fixing hard wood leaping around board in walls etc.
By using 8 mm thick water proof marine ply.
By using 12 mm thick water proof marine ply.
By using 19 mm thick water proof marine ply.
Providing and fixing DECORATIVE HIGH PRESSURE 1.0mm THICK LAMINATED SHEET OF PLAIN / WOOD GRAIN in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S including cost of adhesive, labour etc. complete as directed
Supplying, Providing and fixing BEADING (ARCHITRAVE) of size 50mm wide and 12 mm thick using 2nd class teak wood/water proof marine ply around the door frames with necessary screws and fixing laminated sheet on top etc. complete as directed by the Project Engineer.
Drilling of holes of required size and Providing stainless steel screws for fixing of Wooden Cupboards, Display boards, etc. including rawl plugs with proper level and finishing all complete as directed by the Project Engineer.
Providing and fixing 25 mm thick Colour PVC Integral Foam Sheet door shutters flush door of approved colour, of approved make or equivalent, design, colour and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges, Fixing of Stoppers, tower bolts, baby latch, aldrop, handles etc.wherever required with S.S. screws (Stopper, Tower bolt, Baby latch, Aldrop, Handels etc Shall be supplied by department) etc. complete as per specifications and as directed by Engineer-in-charge. Note : The door should satisy the following technical parameters as under: 1. Density : 0.475 to 0.55 g/cc, 2. Hardness (Shore 'D'): min. 55, 3. Water absorption : max. 1 %, 4. Tensile strength : min. 13 MPa, 5. Elongation : min. 15 %, 6. Flextural Strength min. 30 MPa, 7. Compressive Strength at 10% Deformation : min. 3 MPa, 8. Vicat Softening Temperature: more than 75 Deg Celcius 9. Flammability: classification B : S3 : D0 (to be tested as per NF EN 13501-1 standard)
Providing, supplying and fixing VENITIAN VERTICAL BLINDS (approved) with all accessories and fabricating to required sizes etc as per approved design and approved Fabric complete all as directed by the Project Engineer.
Providing, supplying and fixing HOLLOW METAL FLUSH STEEL DOORS 40mm thick of approved make consisting of door frame and shutters and all hardware fittings, frame made out of 14g thick G.I sheets and shutters made of 16g thick sheets, hollow portion filled with puff, including necessary stiffners in shutters and frame, vision panel of specified size with 4 mm glass and clip on pressed steel frame for vision panels, fixing 4 nos heavy duty stainless steel 304 grade ball bearing hinges, mortise / dead lock of approved make, a pair of 200 mm long stainless steel handles, 250 mm long stailless steel tower bolt, etc. frame hollow portion filled with PCC 1:2:4, necessary hold fast embedded in concrete, fixing in concrete with anchor fastners. finished with Polyurethane painting of approved colour complete all as per drawings and specifications and as directed by the Engineer-in-charge.
RESIZING OF EXISTING ALUMINIUM DOOR SHUTTER 1. Existing aluminium framed swing doors shall make floor touch free (to increase bottom clearance) by resizing it. 2. The job is involved of dismantling existing shutter totally including accessories/fittings; cutting of aluminium section as required; reassembling. 3. Existing damaged/not reusable aluminium sections shall be replaced with new ones and the same will be measured under concerned items. 4. Providing and fixing of m.s. tie rods having suitable nutt/bolts system at both ends of shutter if need. 5. Reshaping and re-fixing of existing board panel/glass sheets as required; 6. Re-erecting and repositioning the shutter as earlier. 7. Re-fixing of all fittings such as pull/push handle; hydraulic door closer; hinges; locking arrangement; tower bolts; 8. Replacing the existing damaged rubber gasket lining and aluminium clips with new ones 9. The contractor shall be provided the sundry materials such as rubber gaskets; screws, ms tie rods, etc and no extra payment will be made for these. 10. If glass panels are broken during handling, the contractor shall replace the same at no extra cost. 11. Measurements: Each shutter a size of 900 mm x 2100 mm will be measured as one job.
Providing and fixing ANODIZED ALUMINIUM WORK FOR DOORS, WINDOWS, VENTILATORS and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately)
Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)
Extra for COLOUR ANODIZING / DYED ANODIZING
Providing and fixing GLAZING IN ALUMINIUM DOORS, WINDOW, VENTILATOR shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-Charge (Cost of snap beading shall be paid in basic item)
With Frosted Glass panes of 5.00 mm thickness
With Clear Float Glass panes of 5.00 mm thickness
With Tinted Colour Glass panes of 5.00 mm thickness
Providing and fixing Approved Quality STAIN LESS STEEL BODY ROLLER WHEELS of approved make for Sliding shutters
Providing and fixing Approved Quality and shape LOCKS cum Handle of approved equivalent make for Sliding shutters. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. Star Locks or equivalent make
Providing and fixing DOUBLE ACTION HYDRAULIC FLOOR SPRING of approved brand and manufacturer (conforming to relevant Indian Standard) for doors including cost of cutting floors as required, embedding in floors and cover plates with M.S pivot and single piece of M.S sheet outer box with slide plate etc. complete as per directions of Engineer-in-charge with brass cover plate
Providng and fixing aluminium grill in natural Silver anodising of min 15 Microns with a opening size of 60mm x 45mm and Minimum weight of 4.12 Kg/ Sq.M including providing and fixing Suitable 'F' / 'H' section outer frame and mullion fixing with screws complete all as per specifications and as directed at site by the Engineer-in-charge .Aluminium alloy shall be of 6063-T6 with yield strength of minimum 6.5 kg/ sq.mm. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. "DECO GRILLE" make Model No. DG- 202 or equivalent make
Aluminium Grill 8 mm thick
Aluminium Grill 10 mm thick
Extra for providing ALUMINIUM GRILL 10mm THICK WITH COLOUR ANODISED by the manufacturer (Champagne, black, Bronze, Gold colours) complete all as per specifications and as directed at site by the Engineer-in-charge
Aluminium Grill 8 mm thick
Aluminium Grill 10 mm thick
FILLING THE GAP WITH SILICON SEALANT between aluminium frame & adjacent RCC / Brick work / Stone work over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Up to 5 mm depth and 5 mm width
Providing and fixing in position SUSPENDED FALSE CEILING SYSTEM / PARTITION SYSTEM USING CALCIUM SILICATE BOARDS with 100% humidity resistance, incombustible as per BS476 part IV with thermal conductivity of 0.043 w/m KC placed in a suspended grid of size of 600x 600mm made of hot-dipped G.I steel sections wherein the ceiling sections of 0.55 mm thick shall be suspended at 1200 mm centres along the length of ceiling with 4mm dia G.I wires/ 1 mm thick strip hangers made of G.I sheet sections with necessary level adjusters and inter channels of 0.90mm thick with connecting clips and resting on the perifery walls on wall angles of 0.55 mm thickness including providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings and as per directions of Engineer-in-charge. The main tees to be suspended from the ceiling/ soffit with the help of metal dash fastners of 6mmx50mm, soffit clits of 25mmx35mmx1.60mm and 4mm dia G.I wire with galvanised spring steel levelling clips/ G.I strip Hangers at 600mm centers . the entire grid system shall be designed to bear a distributed load of minimum 25 kg/Sq.m (Only calcium silicate false ceiling area will be measured for the purpose of payment) Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. HILUX CEILING SYSTEMS or approved equivalent make
8mm THICK CALCIUM SILICATE BOARDS (HILUX CEILING SYSTEMS)
12mm THICK CALCIUM SILICATE BOARDS (HILUX CEILING SYSTEMS)
Providing and fixing lay in false ceiling 600 x 600 mm perforated corrosion resistant Aluminium magnesium alloy metal panel fixed in 24 mm 'T' frame work of module 600 x 600 mm. Panels shall be of size 575 mm x 575 mm with perforation of 1.50 mm dia in a 3 diagonal square pattern giving 22% perforated area of approved colour in 0.70 mm thick Aluminium alloy 3105 with square edges Tiles to be stove enamelled on a continuous application for pre-treatment. The coils to be go through 4 stages of pre treatment three times of oven baked through conversion coating, priming and finish coat ensuring superior adhesion, high corrosion resistance and good colour stability.The coils to be painted on both sides after degreasing. inside surface to have a primer of 5 microns and a coat of natural colour of 5 microns, exposed surface to have a primer of 5 microns, binder of 5 microns and a top coat of approved colour 15 microns. Grid system for fixing ceiling tiles shall comprise of tees. The 24mm main tee runers shall be suspended at an interval of 1200mm centre to centre. The 24nn cross tee runner shall be suspended at an interval of 600mm centre to centre and further supported with 24mm cross tee with inter locking arrangements to form a Grid of 600mm x 600m. The main tee shall be supported by means of 4mm G.I.rod from slab / roof. The suspension shall be provided at 1200 to 1500mm centre to centre.provision for lights, diffusers etc. to be made including extra supports wherever necessary. A non-woven felt made of glass reinforced fibre glued oner the perforation for sound absorbtion Measurements shall be as per actual area of false ceiling with out deductions for lights and diffusers. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. Hunders Douglas make - Model "LUXALON" or equivalent make
REMOVING FLAT BACK URINALS / EWC / OWC / AIWC carefully along with the cast iron / ceramic / plastic flushing cistern including all its accesseries, items including removing bracket screws & existing C.P. fittings & stacking the same as directed by Engineer-in-charge.
REMOVING HAND WASH BASIN carefully alongwith bottle trap, stop cock, pillar tap, brackets & PVC connections carefully & stacking the the same as directed in Civil Maintenance Stores at CT&CRS Building as directed by Engineer-in-charge.
DISMANTLING FLUSHING CISTERN of any size including all its accesseries, removing bracket screws including stacking of useful materials near the site and disposal of unserviceable materials within 100m lead as directed by Engineer-in-charge.
DISMANTLING C.I. PIPES INCLUDING ITS ACCESSORIES IN SHAFTS / OPEN PIPING for following Dia including taking out the pipes manually, breaking lead caulked joints, melting of lead, making into blocks including stacking of pipes within a lead of 200m as per direction of Engineer-in-Charge.
75mm dia CI pipe
100mm dia CI pipe
DISMANTLING G.I. PIPES OF ALL DIAMETER EXTERNAL WORK including excavation and refilling trenches after taking out pipes manually/ by mechanical means including stacking of pipes within 100m lead as per direction of Engineer-in-charge. Note: measurement shall be considered as centre line measurements of pipes of all dia. including fittings & fixtutes & no extra payment shall be made for the attached fittings & fixtures.
REPAIRING OF BIBS TAP / PILLAR TAP / STOP COCK etc. by changing with the spindle, new washers etc. as per site requirement & directed by Engineer-In-Charge.
Providing and fixing Heavy quality 32 mm dia FLEXIBLE PVC (semi rigid) WASTE PIPE of following dia. (semi rigid or flexible) of approved make for sink or wash basin including PVC waste fittings etc. complete all as per specifications and as directed by the Engineer-in-charge.
Providing and fixing required type FLUSH HANDLES for slimeline or champion make Flushing Cistern.
Providing and fixing WASHERS of Flushing Cistern of OWC / EWC / URINAL etc.
Providing and fixing required type SYPHON SET for slimeline or champion make Flushing Cistern.
Providing and fixing CP BRASS / COPPER INLET CONNECTION pipes heavy quality suitable for hot and cold including CP brass unions and nuts 15 mm dia 600 mm long.
Providing and fixing 15mm PVC INLET CONNECTION SUITABLE FOR HOT AND COLD WATER 600 mm long with nuts and washers complete for wash basins/ Urinals etc. with all necessary acessories complete as directed by the Engineer-in-charge.
Providing and fixing heavy quality STAINLESS STEEL / C.P. BRASS GRATING of approved equivalent make as specified for floor traps / nahani traps all as directed by the Engineer-in-charge. SS grating 125 mm dia
Providing and fixing C.P. BRASS TOWEL RAIL of 600 mm long complete fixed to walls with 30 mm CP brass screws with concealed fitting arrangement all as directed by the Engineer-in-charge. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. Jaquar make or equivalent make
Providing and fixing C.P. BRASS OPEN STOP COCK of Heavy Quality of specified / approved make as per specifications and as directed by the Engineer-in-charge
15 mm n.b CP Brass open stop cock of approved make and type
Providing and fixing C.P. BRASS BIB COCK of heavy quality of specified / approved make as per specifications and as directed by the Engineer-in-charge
15 mm dia Bib cock Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. Jaquar continental make or equivalent make
Providing and fixing 15mm C.P. BRASS 2 IN 1 BIB COCK AND ANGLE COCK combination of Heavy Quality of approved make as per specifications and as directed by the Engineer-in-charge
Providing and fixing LIQUID SOAP DISPENSER ES-05 or approved equivalent etc. complete in all respect as per specifications and as directed by the Engineer-in-charge. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. EURONICS make or equivalent make
Providing and fixing 15mm C.P. BRASS SWAN NECK PILLAR COCK of heavy Quality of approved make and specied type as per specifications and as directed by the Engineer-in-charge.
Supplying C.P. Brass Foot operated Valve along with Swan neck Pillar Tap and two Nos. PVC connectors of approx. 0.90 m length each, of approved make and approved sample with necessary approved stainless-steel screw complete as per specifications and as directed by the Project Engineer, including transportation charges and delivery at site work, all taxes as applicable
Providing and fixing Heavy Quality 15mm C.P. BRASS 3 WAY MULTI-OUTLET LABORATORY PILLAR COCK as per specifications and as directed by the Engineer-in-charge. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. Onida make or equivalent make
Providing and fixing heavy quality HEALTH FAUCET with 1.50 metres long flexible hose (Hand Shower / Hand Spray) of approved make with wall brackets and type as per specifications and as directed by the Engineer-in-charge
Providing and fixing stainless steel TOILET PAPER HOLDER recessed type of Jaquar make or approved equivalent and type with S.S screws as directed by the Engineer-in-charge complete.
Providing and fixing heavy quality CP BRASS BOTTLE TRAP 31 / 32 mm of approved make single piece moulded with height of 270mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal,of approved make for wash basins / urinal etc all as per specifications and directed by the Engineer in charge.
Providing and fixing heavy quality C.P. BRASS WASTE COUPLING of following dia for wash basin and sink, of approved make, size and quality all as directed complete C.P Brass Waste coupling 32 mm Dia of approved make Half threaded or Full threaded as per requirement.
Providing and fixing BRASS BALL COCK of heavy quality of following sizes with arm rod and Plastic Ball floats complete as per specifications and as directed by the Project Engineer. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. TECHNO make or equivalent make
20 mm dia.
25 mm dia
50 mm dia
Providing and fixing white VITREOUS CHINA LABORATORY SINK of size 600 x 450 x 200 mm with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass trap with C.P. brass unions complete including painting the fittings and brackets with 3 coats of white enamel paint over a coat of primer, cutting and making good the walls wherever required complete as per specifications and as directed by the Engineer-in-charge.
Providing and fixing VITERIOUS CHINA WASH BASIN of approved make and colour with C.I. brackets, 15mm C.P. brass pillar tap of approved make,15 mm x 600mm long PVC Inlet connection, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge. White vitreous China wash basin size 630 x 450 mm and equivalent sizes with single 15mm C.P. brass pillar tap
Providing and fixing satin finish STAINLESS STEEL AISI 304 (18/8) KITCHEN SINK of size 610 x 510 mm without drain board and bowl size 685 x 535 x 250 mm depth as per IS13983 of approved make, with C.I. brackets, fittings and stainless steel plug 40 mm including painting the fittings and brackets with 3 coats of white enamel paint over a coat of primer, cutting and making good the walls wherever requried complete as per specifications and as directed by the Engineer-in-charge.
Providing and fixing INDIAN WATER CLOSET (ORISSA PAN) of approved make with 100 mm China ware P or S trap, One no. 10 litre High level or low level white PVC flushing cistern with flush pipe & bend with manually controlled device (handle lever) conforming to IS:7231, PVC 15 mm Inlet connection with all fittings and fixtures complete including all connection, embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed by the Engineer-in-charge. White Vitreous china Orissa pattern W.C. pan of size 580x440 mm
Providing and fixing white VITREOUS CHINA EUROPEAN TYPE WATER CLOSET with 'P' or 'S' Trap with solid seat and lid of approved make, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231, flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge. E.W.C. pan in White colour with ISI marked white solid plastic seat and lid.
Providing and fixing white VITREOUS CHINA FLAT BACK HALF STALL URINAL size 580 x 380 x 350 mm / 610 mm with 15 mm C.P. Brass Auto Shut Urinal Flush Cock, with CP Brass flush pipe unions, Heavy Quality C.P. brass Spreaders, C.P waste coupling with dome grating, clamps complete all as per specifications drawings and as directed at site. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. Hindware make or equivalent make - Urinal, M/s. Jauqar make or equivalent make - CP fittings
Providing and fixing CHINAWARE HALF ROUND URINAL CHANNEL 100 / 150 mm dia with or without dead ends set in C.M 1:3 laid to proper slope & grade including finsihing the joints with polymer based tile grout mix as per drawing and as directed by the Engineer-in-charge
Providing and fixing Brass 15 mm C.P. BRASS AUTO SHUT URINAL FLUSH COCK as directed by the Engineer-in-charge Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. Jauqar make - (PRESSMATIC SERIES) or equivalent make
Providing and fixing 15mm C.P. BRASS URINAL SPREADER size with 1/2" BSP thread and shapes, weighing not less than 60 gm of approved make and type.
Providing and fixing PVC LOW LEVEL / HIGH LEVEL FLUSHING CISTERN 10 litre capacity of approved make in white colour with flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures etc. complete as per specifications and as directed by the Engineer-in-charge.
Providing and fixing cast iron NAHANI TRAP / FLOOR TRAP of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kg each), jointing with lead with the connection pipes, placing as per the drawings, embedding in cement concrete 1:2:4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kg / sq.cm pressure and fixing 1 No 125 mm dia C. P brass grating, complete all as specifications and drawings and as directed by the Engineer-in-charge.
Providing and fixing 6mm THICK MIRRORS of size 600mm X 450mm of approved make with bevelled edges complete with 6 mm thick asbestos sheet back ground fixed to walls with C.P. brass screws and concealed washers complete. all as per specifications and as directed by the Engineer-in-charge.
Extra for providing and fixing approved make STAINLESS STEEL 304 GRADE STUDS (with wall spacers) for mirrors etc. complete all as per specifications and as directed by the Enginner-in-charge
Providing and fixing SOLID PLASTIC SEAT of approved make and colour suitable to existing EWC with lid including CP brass / SS bolts, screws etc. for pedestal type W.C. pan complete as per specifications and as directed by the Engineer-in-charge.
Providing, Laying, jointing, fixing and testing Heavy quality (C-Class) GALVANISED IRON PIPES and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing Teflon tape, exposed / concealed by chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint for all concealed lines / two coats of synthetic enamel paint for all exposed lines all as directed by the Engineer-in-charge.
20 mm n.b. G.I pipe
25 mm n.b. G.I pipe
32 mm n.b. G.I pipe
40 mm n.b. G.I pipe
50 mm n.b. G.I pipe
Providing and fixing CHLORINATED PVC (CPVC) PIPES having thermal stability for hot & cold water supply (as ASTM Standard 2846 & SDR - 11 Grade) including all CPVC Plain & Brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with CPVC Solvent cement & testing the joints complete all as per specifications, drawings and as directed by the Project Engineer.
20 mm outer dia CPVC pipe (External) / open
25 mm outer dia CPVC pipe (External) / open
40 mm outer dia CPVC pipe (External) / open
50 mm outer dia CPVC pipe (External) / open
Providing & fixing in position heavy pattern screw down GUN METAL GATE VALVE with handles and wheels of approved make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge.
Providing, supplying, fixing in position, under floors or in walls CENTRIFUGALLY CAST IRON PIPES including required specials like bends, tees, 'Y' collars, cowl etc for soil, waste and ventilation pipes conforming to IS.3989 or Cast Iron hubless pipes confirming to IS 15905 of approved make including cost of jointing with spun yarn and molten lead of specified quantity, caulking the joints, including testing of pipes, painting with primer, fixing at walls with necessary approved type of clamps and brackets complete all as per drawings and specifications and as directed at site.
75 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 or Cast Iron hubless pipes confirming to IS 15905 using 0.90 kg lead / joint
100 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 or Cast Iron hubless pipes confirming to IS 15905 using 1.00 kg lead / joint
150 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 or Cast Iron hubless pipes confirming to IS 15905 using 1.20 kg lead / joint
Providing and fixing PVC RAIN WATER PIPES conforming to relevant IS type B and PVC SWR fittings & specials conforming to relevant IS including jointing with seal ring / With PVC solvent adhesive including fixing in walls using clamps etc complete all as per drawings, specifications and as directed by the Engineer-in-charge.
SWR PIPE 90 mm O/D
SWR PIPE 110 mm O/D
SWR PIPE 160 mm O/D
Supplying and fixing CAST IRON MAN HOLE COVERS and CAST IRON STEPS of approved make and weight as specified in the drawings or as directed by the Engineer in charge.
Providing WHITE WASHING with ready mix lime powder of approved make to give an even shade (Three coats), including scaffolding as per specifications and as directed by the Engineer-incharge.
Providing POLISHING ON WOOD WORK with ready made wax polish of approved brand and manufacturer all as per specifications to required finish and as directed by the Engineer -in-charge complete.
Providing and applying white cement based wall putty of approved make over concrete or Plastered surface up to 3 mm thick to get uniform surface free from undulation including cleaning complete all as directed by the Engineer-in-charge
Providing, applying wall painting two coats on old work with premium PLASTIC EMULSION PAINT of approved brand to give an even shade with cement primer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge
Providing and applying ONE COAT OF CEMENT PRIMER of approved brand on wall surface to receive specified paint including scaffolding complete all as per specifications and as directed by Engineer-in-charge
Providing and Painting two coats of SYNTHETIC ENAMEL PAINT on wood/ steel surfaces of approved brand and manufacture to give an even shade without primer coat including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge.
Providing and treating the OLD surface using ANTI-FUNGAL treatment in the following operations: (i) entire old paint to be scrapped out, (ii) The neeru / cement punning to be removed by chipping completely, (iii) one coat of Antifungal chemical having high degree of Santroprite (Sodium Chloro Penta Chlorophenate with diluant & additives) to be applied, (iv) entire surface to be finished with White cement based Wall putty of approved make to get uniform undulation free surface; complete as directed by the Engineer-in-charge. Note: 1. Old paint will be removed thoroughly either mechanically or by wire brush before application of primer and paint coats and cost of which shall be deemed to be included in the quoted rate. 2. Quoted rate for shall include for cost of covering existing material/furniture/equipments/devices with plastic sheet, removing the old paint by mechanical wall sander/scrubber machine, and cleaning the area as directed by the Engineer-in-Charge )
Providing and painting, finishing with antifungal paint of approved make with two coats over treated surface all as per manufacturer's specifications and as directed by the Engineer-in-charge Note: 1. Old paint will be removed thoroughly either mechanically or by wire brush before application of primer and paint coats and cost of which shall be deemed to be included in the quoted rate. 2. Quoted rate for shall include for cost of covering existing material/furniture/equipments/devices with plastic sheet, removing the old paint by mechanical wall sander/scrubber machine, and cleaning the area as directed by the Engineer-in-Charge )
CLEANING OF UNDERGROUND / OVERHEAD WATER TANK by high pressure cleaning system with hydrodynamic mechanism with nozzels, slurry pumps at 180 bar pressure with required quantity of water , disinfecting the tank with chemical etc. and with ultraviolet treatment etc. complete through M/s Tanclean or equivalent approved and as directed by EIC .
Opening of nahani trap and removing nahani trap jalli and CLEANING THE COMPLETE NAHANI TRAP / FLOOR TRAP and refixing the same with white cement etc. and as directed by Engineer in charge.
Opening of bottle trap from its joint and CLEANING THE COMPLETE BOTTLE TRAP and refitting, refixing same to sinks, wash basins etc. and as directed by Engineer in charge ( Note:- If bottle trap is found in unused condition it will be supplied by department at free of cost).
CLEANING AND REMOVAL OF CHOCKING OF SEWAGE WASTES, MUCK, FROZEN SEWAGE CAKES ETC. FROM EWC/IWC/AIWC MANUALLY, including cost of labour tools, trooly of sewage muck for disposal of designated place, all complete in all respect and as directed by Engineer in charge.
LABOUR CHARGES ONLY FOR THOROUGHLY CLEANING AND REMOVING DUST PARTICLES, OILING THE HINGED PORTION / PARTS FOR SERVICEABLE CONDITION OF ALUMINUM / M.S / WOODEN DOORS, WINDOWS, COLLAPSIBLE GATES, M.S HEAVY GATES including cleaning of glaas panels, removing the existing dust from tracks by blower, cleaning the fittings & fixtures before greasing, applying approved grease, oil etc. complete all as directed by Engineer-in-Charge. Note: Quantity of work considered for 1 Operation comprises of entire CTCRS building including the following: a) Aluminum glazed doors with floor spring or without floor spring b) Aluminum glazed sliding windows or side hung windows c) Aluminum glazed window panels of fixed / louvered / hinged type d) Collapsible grill gate e) Alluminium hollow metal gate / M.S. heavy gate f) M.S. or Wooden door shutters & frames g) M.S. or Wooden window shutters & frames.
Providing and fixing 304 GRADE STAINLESS STEEL WORK for Open drain/ Drain grating / Nahani trap/Jali/hand rail in pipe section/ of approved size and make and quality by welding, mirror / matt polishing , fixing at site etc. for kitchen floor drain/balcony railing & staircases railing including special sections as per drawings, specifications. complete. A sample to be fabricated and to be got approved by the Architect/ Project Engineer before starting of work at site . This work to be executed through approved specialized agency.
Providing and fixing 304 GRADE STAINLESS STEEL ROOM NO PLATE of size 100mm x 40mm of matt polishing, grooving the Room No and Border on Plate as approved by Engineer-in-Charge and fixing with SS Screw at site etc. This work to be executed through approved specialized agency.
Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc. with TOUGHENED FLOAT GLASS PANES with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)
With toughened float glass panes of 6.00mm thickness
Providing and Supplying SOLID PVC INTEGRAL SHEET Made out of J1054 Integral Foam Sheet of M/s Jain Irrigation System Ltd. Or approved equivalent make of white colour or as directed by Engineer-in-Charge.
8mm thick
10mm thick
12mm thick
18mm thick
25mm thick
Carrying out Civil Engineering works like surveying & leveling, checking of formwork fabrication, reinforcement fabrication as per drawings, witnessing sample retrieval & testing for various construction materials, ensuring concrete ingredient ratio at batching plant and pouring of appropriate grade of concrete in plain and reinforced concrete works, ensuring proper mixing of approved ingredients & waterproofing admixtures for mortars and brickwork, plaster, flooring & waterproofing works and other civil & PH works including supervision of construction safety as per BARC specifications & relevant documentation, compiling, binding and preparation of tender documents & Agreements overall as directed by Engineer-in-Charge. Note : (1) Each Job shall be carried out by one qualified Degree holder Civil Engineer with 2 (Two) years experience or Diploma holder with 5 (Five) years experience (Licentiate in Civil/Construction Engineering / Technology) conducted by Board of Technical Examinations / University / Autonomous Govt. / Govt. recognized recognized Polytechnic/ Institute. (2) Deployment: The contractor shall deploy one Engineer for each job for minimum 26 working days per month for minimum 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift including Saturdays, Sundays & holidays whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. In case of emergency works like continuous pouring of concrete or shutdown/maintainance work, the Engineer will have to stay longer occasionally as per the instruction of the Engineer in-charge. No additional payment will be made on this account. (3) Period of work: The contractor shall carry out number of Jobs per month as per requirement at site for the period mentioned in NIT. (4) Mode of measurement : Measurement will be per job basis. A single job shall be carried out by deploying one Engineer exclusively for the particular job. (5) Engineer should be engaged after scrutiny by EIC of CSS, ESG, BARC and approved by Competent authority and the deployed Engineer will report to BARC Engineer/ EIC. (6) The minimum notice period before change of engineer is 1 (one) month; failing which a compensation, for not providing technical support, of Rs. 1,915/- per day of shortfall in notice period will be levied on the contractor.
Carrying out Civil Engineering works like surveying & leveling, checking of form work fabrication, reinforcement fabrication as per drawings, witnessing sample retrieval & testing for various construction materials, ensuring concrete ingredient ratio at batching plant and pouring of appropriate grade of concrete in plain and reinforced concrete works, ensuring proper mixing of approved ingredients & waterproofing admixtures for mortars and brickwork, plaster, flooring & waterproofing works, and other civil & PH works including supervision of construction safety as per BARC specifications & relevant documentation, compiling, binding and preparation of tender documents & Agreements overall as directed by Engineer-in-Charge. Notes : (1) Each Job shall be carried out by one qualified Technician having minimum SSC with Trade certificate in Masonary/Plumber/Carpenter/Painter Trade of not less than one year duration from ITI/Government Recognised Vocational Training Institute or experienced Technician retired from Government service. (2) Deployment: The contractor shall deploy one Technician for each job as Single Day work for 6 working days per week for minimum 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift including Saturdays, Sundays & holidays whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. In case of emergency works like continuous pouring of concrete or shutdown/maintainance work, the Technician will have to stay longer occasionally as per the instruction of the Engineer in-charge. No additional payment will be made on this account. (3) Period of work: The contractor shall carry out number of Jobs per day as directed by Engineer-in-Charge. (4) Mode of measurement : Measurement will be per job basis per day. A single job shall be carried out by deploying one Technician exclusively for the particular job. (5) The Technician should be engaged after scrutiny by EIC of CSS, ESG, BARC and approved by Competent authority and the deployed Technician will report to BARC Engineer/ EIC. (6) The minimum notice period before change of technician is 1 (One) month; failing which a compensation, for not providing technical support, of Rs. 1,384/- per day of shortfall in notice period will be levied on the contractor.
CARRYING OUT MANUAL MISC. CARPENTRY / PLUMBING / CIVIL / JOBS like minor repairs, fixing fitting and fixtures etc. as and when required and as directed by the Engineer-in-charge Note: 1. Labours shall bring necessary carpentary / plumbing tools, minimum materials such as washer, taflon tape, rawl plug, screws, clips etc. 2) Payment shall be made as per the Log book duly approved by the Engineer in charge. 3) Contractor shall arrange necessary Police Verification Certificate for the workers engaged for this work.
SKILLED Mason / Painter JOB / WORKS with valid Police Verification Certificate for entire contract period as required.
SKILLED CARPENTERY JOB / WORKS with valid Police Verification Certificate for entire contract period.
SKILLED PLUMBING JOB / WORKS with valid Police Verification Certificate for entire contract period.
M/S. BALAJI CONSTRUCTION
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .