PROVISION OF HARDSTAND WITH PARKING SHED NEAR BLDG NO P-12 AT NSRY, HARDSTANDING AT KOSWARI PARK AT KADAMBA VANAM AND SPECIAL REPAIRS TO QUARTER DECK BLDG NO P-19 AT INS KADAMBA AT NAVAL BASE KARWAR

Amount

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sqm on plan and getting out in hard/dense soil complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth; for laying/ taking out cable and getting out in soft/ loose soil complete all as specified and directed.

M & L for surface excavation hard and dense soil not exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

M & L for plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation & filling in mass concrete complete all as specified and directed.

Removing excavated material exc 250 m but not exc 500 m and deposited where directed at a level not exc 1.5 m above the base as in soil complete all as specified and directed.

Removing excavated material not exc 50 m and deposited where directed at a level not exc 1.5 m above the base as in soil complete all as specified and directed.

Returning, filling in soil including spreading, levelling, watering and well ramming in layers not exc. 25 cm all as specified & directed.

M & L for moorum/red bajri filling in floors or pavings, laid in layers not exc.15 cm thick spread, levelled and rammed including watering complete all as specified and directed.

M & L for hardcore of gauge not exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for providing 100 mm thick, plain cement concrete type D-2, (1:4:8) using 40 mm graded aggregate as in sub base of floors all as specified and directed.

M & L for providing 50 mm thick, plain cement concrete type B-1, (1:2:4) using 20 mm graded aggregate laid in alternate panel in floorings including finishing the surface even and smooth without using extra cement all as specified and directed.

Supply only glass dividing strips 3 mm thick and 38 mm wide inserted in position conforming to design complete all as specified and directed.

M & L for 50 mm thick sand cushioning for laying interlocking tiles complete all as specified and directed.

M & L for machine pressed precast concrete interlocking paver blocks lacquor finish any shape and size conforming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment all as specified and directed

M & L for machine pressed precast concrete interlocking paver blocks lacquor finish any shape and size conforming to IS 15658-2006 of 80 mm thickness M-35 grade with grey cement and pigment complete all as specified and directed.

M & L for providing cement concrete type C-1 1:3:6 (20 mm graded agg) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M & L for providing precast cement concrete solid building blocks masonry exc 10 cm width, type C5,1:3:6 (20 mm graded aggregate) set in cement mortar 1:6 complete all as specified and directed.

M & L for rendering 15 mm thick plaster in CM 1:4 in two coats (10 mm thick backing coat + 5 mm thick finishing coat) on concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 20 mm thick (externally) in CM 1:4 in two layers (12 mm + 8 mm thick) on brick or concrete surfaces finished even and fair using 3% WPC by weight of cement complete all as specified and directed. NOTE: Water proofing compound shall be measured and paid under respective item.

Supply only integral water proofing compound all as specified and directed.

M & L for preparation of new plastered surfaces of walls of any description including and applying two coats of weather proof exterior emulsion paint and over a coat of primer complete all as specified and directed.

S & F framed work using Fe-410 W Gde E-250 quality B as in doors or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeeting or other covering. Doors etc to be prepared for hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M & L for steel work in tubular trusses, purlins, rafter etc. including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed.

M & L for 20 mm thick 2nd class hard wood planed one side and edges tongued and grooved or rebated (with side of floor or the curb) complete all as specified and directed.

M & L for preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for reinforced concrete pipes 450 mm dia, class NP2 laid and jointed with collars complete all as specified and directed.

M & L for pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of new steel surfaces of any description exc 10 cm in width or girth complete all as specified and directed.

Demolition of concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing all the rubbish as directed by Engineer-in-charge complete all as specified and directed.

M & L for glazed coloured ceramic tiles 300 x 200 x 7 mm thick on vertical surfaces such as skirting dados and risers to steps etc and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat in cement mortar (1:4) and taking down old tiles complete all as specified and directed.

M & L for non skid ceramic coloured joint free tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles including screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes and taking down old tiles complete all as specified and directed.

M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including over 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M & L for point wiring 1100 Volts grade 1.5 Sqmm PVC (FRLS) insulated unsheathed cable with multistranded copper conductor FR grade conforming to IS-694-1990 with ISI marking through rigid non metallic PVC conduit with all accessories in wall/ ceiling/ floor/roof etc, including suitable size sunk pressed steel or cast iron terminal box with 3 mm thick plastic laminated sheet top cover including providing 1.5 Sqmm PVC insulated FRLS unsheathed 1100 Volts multistranded copper conductor cable as continuous earth wire connected to common earth dolly complete all as specified and directed for fan/ light point controlled by one way switch.

Description all as per item No. 35.00 above but for one 3 pin socket outlet 5 Amp on independent board.

Description all as per item No. 35.00 above but with cable 2.5 sqmm for one 3 pin socket outlet 15 Amp on independent board and size of cable 2.5 sqmm.

S & F switch piano single pole one way flush button ISI marked, 5 Amps, 230 volts, complete all as specified and directed by Engr-in-Charge.

S & F switch socket combination 2 in 1, 5 Amps, flush type 240 volts with ISI marked all as specified and directed.

S & F switch socket combination 2 in 1 multipurpose 6 pin, 5/16 Amps, flush type 240 volts with ISI marked all as specified and directed.

S & F integral sleek extruded polycarbonate batten for LED tubelight with white acrylic cover suitable for upto 1 x 22 W LED tubelight compete all as specified and directed. MAKE: Havells Cat No. REGALBATTEN8UPTO1X22WDSBSWH or equivalent in Bajaj/Philips/CG

S & F LED tube rod 20 W 6500 K, 1200 mm long compete all as specified and directed. MAKE: Havells Cat No. CRYSTAL1213T8DSTL20WLED865SGLASS or equivalent in Bajaj/Philips/CG

S & F wiring for circuit/ submain wiring alongwith earth wire with 4 x 2.5 sqmm + 2 x 1.5 sqmm earth wire of FR PVC insulated copper conductor, single core cable in surface/ recessed as required in PVC casing caping compete all as specified and directed.

Supply, laying, jointing and testing of LT uderground XLPE insulated screened PVC bedded, armoured heavy duty electric cable with stranded aluminium conductor, 1100 Volts grade of cross sectional area 16 sqmm 4 core, conforming to IS-7098 (Part-I) 1988 laid in trenches/ wall/ floor/ ducts etc fixed with saddle and clamps or passing through pipes complete with cable and connection with proper thimbles, nuts, bolts and washers all as specified ad directed. (Excavation and earth work, sand cushioning and PCC cover for cable protection will be measured and paid seperately.)

Supply and laying un-reinforced pre cast concrete cable cover, class LV, type 1, flat, size 250 x 150 x 40 mm all as specified and directed.

Supply and spread dry river sand in trenches for cable cushioning complete all as specified in Clause 19.75 of SSR Part-I and directed. NOTE: Punned thickness of sand only will be measured and paid.

S & F MCB TPN, 35 to 63 Amps, 415 Volts, 3 phase, 10 KA Capacity all as specified and directed.

S & F MCB SPN, 6 to 32 Amps, 230 Volts, Single phase, 10 KA Capacity all as specified and directed.

S & F MCB SP, 6 to 35 Amps, 230 Volts, Single phase, 10 KA Capacity all as specified and directed.

S & F MCB DB TPN 4 ways double door, IP-42 protection with 200 Amp rated bus bar, 415 Volts complete all as specified and directed. MAKE: HAVELLS/INDOASIAN/L&T/LEGRAND

S & F MCB DB SPN 4 ways double door, IP-42 protection with 200 Amp rated bus bar, 415 Volts complete all as specified and directed. MAKE: HAVELLS/INDOASIAN/L&T/LEGRAND

M & L for earthing complete with galvanized steel earth plate 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check-nuts, and washers of galvanized iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe light grade 15 mm bore for protection of GI wire from earth electrode to and including the earth test point of galvanized Iron/steel of size 75 x 75 x 25 mm, supplying and laying charcoal dust, common salt, PCC 1:2:4 type B-1 chamber and MS angle iron frame 40 x 40 x 3 mm and RCC cover 40 mm thick (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia, GI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate No. 3 of SSR Part I of 2009 and connected to earth test point including testing complete all as specified & directed. NOTE: Cost of earthing lead upto 7.50 m shall be included in cose of above item.

Ms V. S. NAYAK

S M Shetty

M/S KAMALKANTH NAIK

LEKSHMI ENGINEERS

M/S G.N.POWAR

Bidder Name

M/S G.N.POWAR

ABDUL RAHIM

LEKSHMI ENGINEERS

M/S KAMALKANTH NAIK

Ms V. S. NAYAK

S M Shetty