SPL REPAIR TO BLDG NO P-11 AT 1 DET HQ INT AND FS GROUP AT DID LINE, PROVN OF CERTAIN B/R AND E/M WORKS FOR HQ DELHI AREA OFFRS MESS AT NO 01 MALL ROAD, PROVN OF ROOF TREATMENT AT HOUSE NO P-15 BAIRD PLACE AND STORAGE ACCN AT 10 PARA, PROVN OF ALUMIN

M & L for Dismantling of brick / cement tiles (laid flat or on edge) on roof surface laid bedded and pointed in any mortar.

M & L for Demolition of mud in roof, any thickness, including plastering and leaping upto six storey bldg incl necessary scaffolding arrangement complete all as specified and directed (whether full thickness removed or only a part there of) and removing from cantonment area or as directed complete all as directed by Engr in charge and specified.

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of reinforcement to facilitate demolition (Parapet wall,fins,fascias,chajjas, overhanging slab, beam, shelves,cooking platform etc) complete all as specified and directed.

M&L for reinforced cement concrete (Design mix) M-25 (20 mm graded stone aggregate) as in fins, slab ,facias, louvres, parapets, and railings, newels, balustrade, and the like complete.

M & L for RCC M-25 design mix as in slabs supported on walls, over hanging slabs , beams and columns in floors , roofs, landings , balconies, canopies, deck slabs, chajjas and shelves, cooking platform etc complete all as specified and directed by Engr-in-Charge.

S&F TMT bars 10 mm dia & over as in reinforcement of columns, beams, RCC, slabs, chajjas, lintels etc cut to length bent to shape required including cranking, bending, spirally hoping for columns, hooking ends and welding the new reinforcement with old steel bars complete.

S&F 8mm dia TMT bars, cut to length bent to shape required including cranking bending spirally for hoping for columns, chajjas to parapets etc hooking ends and binding with mild steel wire not less than 0.90mm dia complete.

M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pilasters, buttresses, etc.; vertical or to better, fair finishes. Complete

M&L Formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement or cement lime morta including all quoins, arches,pillars, etc complete all as specified and as directed.

M&L Brick work with sub class "B" bricks , straight or curved on plan exc 6 m mean radius built in cement mortar (1:6),(up to six story Bldg) complete all as specified.

M&L Brick work with sub class "B" bricks , straight or curved on in half brick thick wall built in cement mortar (1:4),(up to six story bldgs.) complete all as specified.

M&L for APP based modified pre-fabricated, minimum 3 mm thick and weighing not less than 3.00 Kg per Sqm water proofing membrane reinforced with polyester non woven fabric (wt not less than 150gms/sqm) land on primed surface by forced application conforming to IS -3488 @ 0.4 LT/Sqm, membrane laid by torch application side over lap of 75 mm and end overlap of 100 mm wide, joint/overlap sealed with torch applications for parapet etc the membrane taken up to 30 cm and then inserted inside the parapet after making necessary groove in brick or RCC parapet wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 as required after necessary preparation of the surface and applying one coat of aluminum painting complete as per manufacturer’s instructions INCL applying evenly a tack coat of industrial bitumen 85/[email protected]/Sqm complete all as specified and directed.

S & F for Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid over and incl 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface up to 3 cuts complete, including providing skirting up to 150 mm height along the parapet walls in the same manner.

M & L for plain cement concrete 1:2:4 (type B-1 using 20 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges etc complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness on steps, jambs, pillars, walls, cooking platform, floors, aprons, skirting etc laid bedded and pointed in any mortar complete all as specified and directed

M & L for Granite (of any type) work, 18-20 mm thick slab(table rubbed and polished) in cooking platforms,jambs, windows cills lift wall, skirtings, dado etc where ever required and likes, over and incl cement mortar bedding of 20 mm thick in CM 1:6, including pointing in white cement using marble dust with admixture of pigment to match including rounded edges with shade of granite complete all as specified and directed.

M & L for Granite (of any type) work, Granite (of any type) tiles 18- 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete on cement mortar bedding of 20mm thick in CM 1:6 including pointing in white cement using marble dust with admixture of pigment to match including rounded edges with shade of granite complete all as specified and directed.

M&L for drilling holes for pipes etc not exc 25mm dia in granite all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for vitrified Ceramic tiles, double charged, light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm of size (600mm X 1200mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete, over and including 15mm thick rendering in cement mortar (1:6) complete all as specified and as directed.

M&L for vitrified ceramic tiles double charged (light shade) 10 mm thick (Square/ rectangular) area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm of size as in skirting, laid over and incl 10mm thick cement plaster in CM (1:4) , set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade of tiles.

M & L Glazed ceramic tiles of approved colour and design in vertical surfaces 600mmx300mm or 300mmx450mmx7mm thick including provision of high lighter tiles/boarder and jointed in neat cement slurry and pointed in white or coloured cement to match, over and incl 10mm thick rendering in cement mortar 1:4 all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) any type and size not exc. 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) any type and size exc. 1.5 Sqm but not exc. 4.00 Sqm each complete all as specified and directed.

S & F Mild Steel framed work such as in door frame, door shutters / gate of angel or other section with gusset plates, rails, braces, etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including hings hold fast of Fe 410-W (Gde E-250 quality) etc complete all as specified.

S&F 4.00 mm thick sheet glass ordinary quality and glazing with oil putty / rubber beading as in uPVC window / steel window shutter etc in square not exc 0.5 Sqm in each pane.

S&F 4.00 mm thick sheet glass ordinary quality and glazing with oil putty / rubber beading as in uPVC window / steel window shutter etc in square exc 0.5 Sqm in each pane.

S&F stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed tinned tacks or galvanised wire staples .

S&F in repair 25 mm dia SS curtain rod stainless steel AISI 304 , with fixing of brackets, side knobs of good quality as approved complete all as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete.

M&L for 75 mm thick in Plain cement concrete type C2 (1:3:6) (using 40 mm graded aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

M & L for 75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing completed all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls and concrete surface of ceiling etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. Note :- This Item will be also executed in highrise bldgs and necessary provision for T&P, scaffoling and safety measures etc shall deemed to be included in unit rate quoted by the tenderer for the same.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and fair complete all as specified and directed .

M&L for rendering 10+5 mm thick (in layers) on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and fair complete all as specified and directed by Engr-in-Charge.

M & L Rendering 10 mm thick on fair faces of concrete or concrete surface in ceiling in CM 1:3, finished even and fair complete all as specified and directed by Engr -in Charge.

M&L for preparation of the newly plastered surfaces of walls applying wall care putty of 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth to receive primer and applying one coat primer & two coats Distempering with, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

M&L for preparation of the newly plastered surfaces of ceiling applying wall care putty of 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth to receive primer and applying one coat primer & two coats of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

M&L for preparation of newly plastered surfaces of walls and providing and applying putty of 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified as directed by Engr-in-charge.

M & L for complete removal of existing treatment including preparing of plastered or unplastered surfaces / concrete surface of wall etc including cracks/holes in surface filling with white putty and applying two coat of OBD over a coat of chalk whiting etc complete all as specified and directed.

M&L two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

M&L one coat of synthetic enamel paint (finishing coat) over one coat of primer to old steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S & F mild steel Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165

Providing and fixing stainless steel (Grade 304) railing, guard bars, grills etc made of hollow tubes, channels, plates , bars , flats etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing, guard bars, grills with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement all as specified and directed

S&F solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame, complete all as specified and directed.

M&L for Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 ®

S&F Mild Steel screw bolts 5 to 10 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5 cm long, complete all as specified and as directed.

S&F Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 MPA as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.

Excavation in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 cum getting out, returning, filling in ramming earth or broken rubble in layers not exceeding 25 cm, watering and removing of surplus soil to a distance not exc 50m and making good surfaces, complete all as specified and as directed.

S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut, Nipple complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S&F steel water tubing galvanised 20 mm bore medium grade fixed to walls, under floors and on ceiling surfaces and including taking up or down old steel tubing 20 mm bore and connecetions in any postion etc complete all as specified and directed.(Note : Pipe work executed in saft area and roof top upto the 10 story building also )

S & F in repair 20 mm bore Gun metal, globe or gate valves, with iron wheel head / leaver arm, screwed both ends for iron pipe and fixed

S & F for 2 mm thick fibre glass reinforced translucent corrugated sheeting with additional reinforcement of chicken mess with two corrugation side lap fixed with 'L' or 'J' type or crancked hook bolts including dismantling of of existing sheeting of any type, complete all as specified and directed.

Dismantling wall ceiling board (ibre, insulation etc) or insulation boards slabs, blankets any thick ness including cover fillet complete all as psd and directed.

M & L of false ceiling with GRG (Glass fibre reinforced Gypsum) tile with semi perforated 12 mm thcik micro reguler edge of size595x595mm of approved textures design and patterns having moisture conteint less than 2% humidity resistance of 99 % ,NRCO 50 to 0.75 as per IS 8225 :1987. Non combustible as per BS 476 (pART-IV) 1970 and light reflactance of 85% (Minimum) to be laid in the horizontal level suspended and interlocking metal T-Grid or hot dipped galvanized iron secton of 0.33 mm thick (galvanized @ 120 gms per sqm including both sides) comprising of main T runner of size 15x32 mm of length 3000mm, crosss T of size 15x32mm of length 1200mm and secondary intermidiate cross T of size15x32mm of length 600mm to from grid module of size 600x600 mm, suspended from ceiling using galvanised miled steel items i.e 50mm long, 8mm outer diameter M-6 dash fasteners 6 mm dia fully threaded hanger rode up to 1000mm length and L- shaped level adjuster of size 85x25x2mm Galvanized iron parimeter wall angle of size 24x24x0.40mm of length3000mm to be fixed on periphery wall/partition with the held of plastic raw plugat 450mmc/c and 40mm long dry wall wood scress, complete all as approved by Engr in charge.

M & L for OUT DOOR coloured ceramic heavy duty tiles 10 to 15 mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified.

M&L for preparation Internal wall and ceiling surface old/new by complete removal of existing treatment of walls for upto 4 storey buildings by mechanised sander of Berger Paints or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools as required and applying a layer of 1mm thick wall care putty, again sand papering thus making surface smooth and applying one coat of primer and applying two coats of premium qualiy exterior acrylic emulsion paint (weather coat) on surfaces complete all as specified and directed by Engr-in-charge. Note : (i) Final finishes to be applied with roller.

Aluminium alloy powder coated (50micron) anodised aluminium door frame section 100mm x 44mm x 2mm thickness, shutters of aluminium section of size 85mm x 44mm x 2mm thick Top rail and both styled of size 100 mm x 44mm x 2mm thick lock rail and bottom rail of xize 115mm x 44mm x 2mm thick incl aluminium anodised snap beading and rubber packing & 5.50 mm thick frosted designer glass/ particle board (as approved by GE) incl 100 mm long alm butt hinges 04 Nos each leaf 200mm long tower bolt, 200 mm long fancy ryper alm handle - 02 Nos on each leaf, 4 leaver brass 100mm long mortick lock, floor spring for each leaf complete all as specified and as directed.

S&F Aluminium anodized grills with 6mmx5mm aluminium section having square gap of 100mm thick with fixing arrrangment complete all as specified and as directed.

Aluminum powder coated partition with frame of standard powder coated aluminum sections of size 101.60mm x 44.45mm x 2mm in vertical and horizontal members and glazed with 5mm thick tinted glass and 12mm thick prelaminatde particle board interior grade with laminations on both faces as directed by Engr-in-Charge according to site requirement including jointing cleats, glazing pins, rubber packing and fixing accessories as per site requirement complete all as specified and directed.

S&F anodized aluminium frames for windows/ ventilators with one or more rebates incl cleats for fixing etc. complete all as specified and as directed.

S&F powder coated aluminium window and ventilator shutters, side hung type with out sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such hings type B-21 100 mm long (3no.), aluminium tower bolt 100 mm long (2no) suitable handle (2No) complete all as specified and as directed.

M&L for 1st/Premium quality glazed ceramic digital coloured tiles with highlighter concept in matching pattern of size 1200 x 600 x 7 to 8 mm thick as in vertical surfaces such as skirtings, dados etc set & jointed in neat cement slurry & pointed with white or coloured cement to match the shade of tiles, over and incl 15 mm thick backing coat in CM (1:4) complete all as specified and directed.

M&L for Non skid joint free coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:6), over and incl 25mm thick PCC (1:2:4) type B-0 as in levelling course, complete all as specified

Description all as per item no 72 above but size of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, complete all as specified and as directed.

M&L for Vitrified ceramic tiles ultra charged (dark shade) 10mm thick (square/rectangular) area of each tile exc 0.42 sqm but not exceeding 1.00 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) complete all as specified

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

S&F in repair Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) (Make: Jaquar cat part No CON-281KN or Kohler cat part No K-98755IN-4-CP or Hindware cat part No F730022)

S&F in repair Hand Shower 140mm Round Shape Multi Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System (Make: Jaquar cat part No HSH-1729 or Kohler cat part No K-99063IN-CP or Hindware cat part No F500007)

ࠀ
♓⁆湩爠灥慬散敭瑮䌠湥牴污䠠汯⁥慂楳楍數⁲楷桴畯⁴潐異⁰慗瑳⁥祓瑳浥眠瑩⁨㔴洰潌杮䈠慲摩摥䠠獯獥ਠ䴨歡㩥䨠煡慵⁲慣⁴慰瑲丠佃ⵎ㘱䬹䉎漠⁲楈摮慷敲挠瑡瀠牡⁴潎䘠㌷〰㤰昩଀舀ࠀ♓⁆湩爠灥慬散敭瑮䄠杮汵牡匠潴⁰潃正ⴠ㈠圠祡眠瑩⁨慷汬映慬杮੥䴨歡㩥䴠剁⁃慣⁴慰瑲渠䩍

汬戠⁥污潳映獵潩敷摬摥椠据畬楤杮搠楲汬湩⁧景栠汯獥映牯映硩湩⁧慨摲慷敲猧愠摮搠慲湩条⁥景眠瑡牥攠捴‮晁整⁲楦楸杮映慲敭琠敨朠灡戠瑥敷湥映慲敭愠摮愠橤捡湥⁴楦楮桳摥眠污桳污敢映汩敬⁤楷桴眠慥桴牥瀠潲景猠汩捩湯猠慥敬瑮漠敶⁲慢正牥爠摯漠⁦敲畱物摥猠穩⁥湡⁤景愠灰潲敶⁤畱污瑩⁹潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥戠⁹湅楧敮牥椭⵮桃牡敧ਮ丨瑯㩥吠敨甠楮⁴慲整焠潵整⁤祢挠湯牴捡潴⁲湩汣摵⁥愠汬漠桴牥挠湯敮瑣摥愠捣獥潳楲獥‮敎⁴灏湥湩⁧楷汬戠⁥敭獡牵摥氠牯瀠祡敭瑮瀠牵潰敳⤮ՍҁĈ䴀䰦映牯瀠潲楶楤杮倠䵍⠠潐祬敭⁲潭楤楦摥挠浥湥楴楴畯⁳潭瑲牡 ⴺ⠊⥩䐠祲猠扵猠牴瑡⁥畳晲捡⁥湡⁤牦敥漠⁦敤牢獩☠搠獵ੴ椨⥩䄠灰祬湩⁧灅硯⁹潢摮挠慯⁴湯琠敨猠畯摮猠扵瑳慲整甠楳杮愠灰潲敶⁤灳慲⁹慭档湩⁥牯猠極慴汢⁥牢獵敨⁳…湥畳楲杮琠慨⁴潮瀠湩栠汯獥愠敲瘠獩扩敬⠮湉挠獡⁥楰潨敬⁳牡⁥瑳汩楶楳汢⁥晡整⁲⁡潣瑡‬⁡敳潣摮挠慯⁴桳污敢愠灰楬摥琠湥畳敲愠獢湥散漠⁦楰潨敬⥳ਮ椨楩 浉敭楤瑡汥⁹晡整⁲灡汰捩瑡潩景攠潰祸戠湯⁤潣瑡愠⁳扡癯⁥灡汰⁹䵐⁍倨汯浹牥洠摯晩敩⁤散敭瑮瑩潩獵洠牯慴⥲漠⁦瑡敬獡⁴瑳敲杮桴攠畱癩污湥⁴景䴠㐭‰潣据敲整漠⁦癡牥条⁥㔲洠桴捩湫獥⹳上瑯⁥›䄠灰楬慣楴湯漠⁦䵐⁍桳污敢瀠敲敦慲汢⁹敢椠潣瑡⁳景愠灰⁸〱浭琠楨正敮獳‮䵐⁍潷歲猠慨汬戠⁥硥捥瑵摥椠慦物汥⁹慲楰⁤畳捣獥楳湯⁳潳愠⁳湥楴敲眠牯獩挠浯汰瑥摥眠瑩⁨湩㌠‰業獮⸩倠䵍猠慨汬戠⁥牰⁥慰正摥爠慥祤琠獵⹥⠊癩 䵐⁍畳晲捡⁥潴戠⁥潭獩⁴畣敲⁤潦⁲桴敲⁥慤獹映汯潬敷⁤祢愠物挠牵湩⁧湩琠浥数慲畴敲愠⁳敲潣浭湥敤⁤祢洠湡晵捡畴牥挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤上瑯⁥ⴺ吠楨⁳†瑉浥眠汩敢愠獬硥捥瑵摥椠楨桧楲敳戠摬獧愠摮渠捥獥慳祲瀠潲楶楳湯映牯吠倦‬捳晡潦楬杮愠摮猠晡瑥⁹敭獡牵獥攠捴猠慨汬搠敥敭⁤潴戠⁥湩汣摵摥椠湵瑩爠瑡⁥畱瑯摥戠⁹桴⁥整摮牥牥映牯琠敨猠浡⹥δºȈ䐀獥牣灩楴湯愠汬愠⁳数⁲牳瑩浥渠⹯ㄠㄶ〮‰敨敲椭⵮敢潦敲戠瑵眠瑩⁨⸱‵煳洠䘠䱒⁓潣灰牥眠物⁥楷桴ㄠ㔮匠浱剆卌挠灯数⁲慥瑲⁨楷敲映牯†湯⁥潳正瑥漠瑵瑥瀠楯瑮㔠愠灭⁳湯琠敨猠浡⁥潢牡⹤긠଀렀ࠀ鈀ࠀ
⁓…⁆䴠摯汵牡猠楷捴⁨‶流Ɒㄠ眠祡‬‱洠摯汵⁥楳敺挠浯汰瑥⁥污獡搠物捥整⹤ਠ慍敫㨠䰠来慲摮䄠瑲潥⽲䠠癡汥獬䴠牵湡⽯删潥 偈⁌浓牡⁴牯攠畱癩污湥⹴N ł匀☠䘠猠牵慦散愠摮眠污潭湵整⁤䕌⁄畴敢氠杩瑨映瑩楴杮眠瑩⁨汁浵湩畩潨獵湩⁧畬敭晥捩敩据⁹業㈱‰浬眯瑡⁴…湩整慲整⁤汥捥牴湯捩搠楲敶⁲楷桴琠扵⁥潲⁤景㈠‰慗瑴‮汳浩攠敬慧瑮搠獥杩湡⁤湩汣摵湩⁧潣湮捥整⁤楷桴㌠挠牯⁥㌲〯〮㜰‶湩畳慬整⁤潣灰牥眠物⁥牦浯挠汥湩⁧潲敳琠楦瑴楴杮挠湯敮瑣牯愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥踮畓灰祬愠摮映硩湩⁧漠⁦慗汬䴠畯瑮摥䈠䑌⁃慆〴‰浭猠敷灥瀠慬瑳捩戠摯⁹祴数椠据畬楤杮洠歡湩⁧污汥捥牴捩挠湯敮瑣潩獮挠浯汰瑥⁥污獡搠物捥整⹤ȈĈ匀䘦䈠䑌⁃䈨畲桳敬獳䐠物捥⁴畃牲湥⥴䌠楥楬杮䘠湡⠠攠敮杲⁹晥楦楣湥⥴‬㐱〰洠楷桴䤠⁒敒潭整挠湯牴汯敬⁤㔳ⱗ猠牥楶散瘠污敵㜾ㄮ‬灯牥慴湩⁧潶瑬条⁥㈲嘰‬業楮畭楡⁲敤楬敶祲㈠㔶挠浭挠慬獳漠⁦湩畳慬楴湯✠❆栠癡湩⁧畦汬挠灯数⁲潭潴⁲楷摮湩⁧…楲扢摥㌠丠獯䄠䴯戠慬敤⁳慭楫杮渠捥獥慳祲攠敬瑣楲⁣潣湮捥楴湯漠⁦畳瑩扡敬倠䍖挠灯数⁲楷敲映潲散汩湩⁧潲敳琠散汩湩⁧慦潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥吮敨映湡猠慨汬栠癡⁥䕂⁅‵瑳牡爠瑡湩⁧愠摮猠牥楶散瘠污敵洠牯⁥桴湡㜠ㄮ‮䴠歡ⵥ慈敶汬⁳ 瑁浯敢杲 牃浯瑰湯愠摮䜠汯浤摥污ଁ切ࠀ
畓灰祬愠摮映硩䄠瑵浯瑡捩䠠湡⁤牤敩⁲潨⁴楡⁲楤灳湥敳⁲楷桴椠普慲敲⁤敳獮牯洠瑥污戠摯⁹楷桴愠汬愠捣獥潳楲獥椠据畬楤杮愠汬攠敬瑣楲慣潣湮捥楴湯挠浯汰瑥⁥污獡猠数楣楦摥愠摮愠⁳楤敲瑣摥ਮ慍敫‭慊畧牡䈠汯⁴潔捵⁨牆敥椠瑮慲敲⁤牯攠畱癩污湥⁴湩攠牵湯捩⹳º

S&F in repair PVC (SWR) floor trap, plain with grating (waste hole/plain type) including jointing with solvent cement, 75 to 100 mm mm diameter of outlet, all as specified.

Demolition and breaking up drain pipes (SGSW, AC, PVC or reinforced cement) set in cement mortor internal dia of pipe 75 to100 mm complete all as specified and directed.

S&F of 110 mm bore SWR pipes single socketed in any length with rubber ring joints fixed to walls ,floors, trenches etccomplete all specified and directed.

Descritpion all as per item No 101.00 above but 75 mm dia PVC SWR pipe.

S&F 110 mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed.

Descritpion all as per item No 103.00 above but 75 mm dia PVC SWR bends.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connection incl cleaning for refixing or removal to store.

S&F for GI tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 15 mm dia bore.

Taking up or down 20mm dia steel tubing and connection incl cleaning for refixing or removal to store.

Taking up or down 25mm dia steel tubing and connection incl cleaning for refixing or removal to store.

S&F for GI tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 25 mm dia bore.

S&F in repair Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed , bore of pipe 25mm.

Dismantling/ taking out of existing roof tretment with APP membrane of any thickness including taking out existing sreed bed / rendering of any thickness with all necessary arrangements complete all as specified and as directed.

M & L for providing and applying smart care Dampproof, with fibre reinforced elastometric liquid water proofing membrane formulated with reinforced acrylic fibres having Sun Reflective Index (SRI) of 105 on horizontal/ vertical surfaces of roof/ wall/ chajjas in multiple costs @2.0 litre/ sqm. Primary coat is self-priming coat of elastomericwaterproofing liquid (Dilition with water in the ratio of 3:1, damp proof : Water) and other coat to be applied undiluted. The coating needs to be reinforced with 40GSM Geotextile, to sandwiched between 2nd &3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Cgarge. Make : SmartCare Damp Proof of Asian or equivelent in Berger/ Nerolac/ STP only. Notes: (1) The work shall be executed through authorised appplicatot of manufacturer only. (2) Authorised Applicator shall be approved by GE befor starting the work. (3) All materials shall be produced directly from manufacturer. The purchase voucher shall be produced to the Engineer-in-Cgarge for his verification of material. (4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water Proofing treatment for a period of Eight years. A sum equivelent to 2.5% ( Two point five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor's duues as security deposite. The contractor may, however, furnish a fixed deposite receipt in lieu from a Schedule bank pledged in fevour of Garrison Engineer.

M&L for PCC 1:2:4 type B -1 (using 20mm graded crushed stone agregate) as in roof slop and required, brushing neat cement slurry with 3.0kg of cement per sq. metre including necessary form work and scaffolding upto 2nd floor here required to match the existing surfaces rounded orchamfered on edges complete all as specified and directed.

Disconnecting existing tanks exc 250 ltr not exc 500 ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.

Disconnecting existing tanks exc 500 ltr not exc 1000 ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.

Taking down cement plaster /duster bed PCC of Column, chajja, Parpapets of roof, facia, drops etc and making good with cemnet plaster 10mm thick in CM 1:3 with PCC 1:2:4 type B1 (average thickness of PCC 25mm) as required, brushing with neat cement slurry @ 3.0 Kg of cement per Sqm including necessary form work and scaffolding upto 2nd floor including fixing of wire netting where required to match the existing surface complete all as specified and directed

M&L for Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation etc or for shafts, wells, cesspits incl laying of LT Cable etc not exc 10 sqm on plan and not exc 1.5 mtr in depth and getting out in soft/ loose soil complete all as specified and directed.

M&L for Excavating over areas, not exc 1.5 m deep and getting out in soft/ loose soil complete all as specified and directed.

M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

M&L for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for RCC Design Mix M-25 (using 20 mm graded aggregate) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for RCC Design Mix M-25 (20 mm graded aggregate) for Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC Design Mix M-25 (20 mm graded aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for Form work to flat sided of pillars, post,struts columns,square,rectangle or polygonal etc. rough finished surfaces complete all as specified and directed.

M&L for Use and waste of form work to sides and soffits of floor or roof beams, beam haunching, girders, bressumers, lintel beams/lintel band , cantilever and similar work rough finished surface of concrete complete all as specified and directed.

M&L for RCC Design Mix M-25 (using 20 mm graded aggregate) for Chajjas complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide complete all as specified and directed.

M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in CM 1:4 complete all as specified and directed.

M&L for prepration of new plastered surfaces of wall/ceiling and applying of Birla/JK white wall putty approx 2 mm thick as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/ Old surfaces. complete all as specified and directed.

M&L for preparing new plasteres surfaces and applying of Birla/JK white wall care putty approx 2 mm thick as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying two coats of Plastic emulsion paint over a coat of primer of walls/ceiling Surfaces of any description over 10cm girth or width, not otherwise described complete all as specified and directed.

Moorum/red bajri filling in floors or pavings, laid in layers not exc 15 cm thick, spread, levelled and rammed incl watering.

M&L for Vitrified Ceramic light shed Coloured tiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles, over and including 15 mm thick screed bed in CM 1:6, complete all as specified.

Descritpion all as per item No 145.00 above but on vertical surfaces such as skirting / dados with over and including 10 mm thick CM 1:4 as in backing coat / rendering, complete all as specified.

S&F for steel windows / Ventilators fabricated from roll formed sections made of galvanized steel colour coated powder coated (Base steel as per IS-513 D quality galvanized as IS 277 with zinc coating of 120 GSM with total coated thickness of 0.60mm. The coated section shall be with primer coated of primer of -7 microns thick, finish painted with a polyster paint of 12.16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure plyster powder upto 50-60microns thick with the following specifications (a) Main frame 72mm x 55mmx0.58mm (b) Mullion 72mmx50mm x0.58mm(c) Glazed /guazed shutter frame 47mmx20.20mmx0.58mm (d) Glass beads size 12mmx12mmx0.58mm Accessories. Each shutter shall be provided the following fittins (a) Stainless steel pipe of hinges 01 set (b) Alumminium powder coated handle-04 Nos . Glass panes Glazed shutter and fixed glass provided with glass of 5.00mm thick float glass . WIRE MESH –Stainless steel wire mesh of 0.3 mm nominal dia of wire and average width of aperature 1.40mm. Grills window shall be provided with grill made of 10mm square MS bars welded to 12mmx6mm thick MS plate . Distance between bars should not be more than 12cm c/c. Total grill unit shall be enamel painted and fixed to window frame with screw . Note: The glazed/Guaged shutter includingguard bars shall be measure once i.e. as per area of opening. No separate payment of separate shutter i.e. glazed and fly proof and guard bars shall be made. Area of shutter shall be the area of opening. The rate quoted by the contractor is deemed to inclusive of all aspects as specified in Drg No CEDZ/TD/289 sheet 1 R/2 and 2R/2.

S&F for Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, incl filling of chowkhat with PCC 1:3:6 type C-1, complete all as specified and directed.

S&F 30mm thick flush shutter, solid core construction, with block board core and plywood face panel commercial type on both sides complete all as specified and directed.

Material and labour for second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass gauge etc ,devided in to squares, with plain chamfered or rounded mitred and rebated sash bars any numbers. edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.

M&L for butt hinges Medium weight cold rolled mild steel 100mm long complete all as specified and directed.

M&L Aluminium alloy anodised sliding door bolt with hasp, stape (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 250mm long complete all as specified and directed.

S&F Extruded Aluminium alloy handle fabricated type, anodised of size 150mm complete all as specified and directed.

M&L for 150mm length of Aluminium anodised barrel tower boltes of extruded section complete all as specified and directed.

S&F mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M&L for Preparing new surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for 10 mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding) with WPC (WPC shall be measured and paid separately)

Supply only of liquid water proofing compound complete all as specified and directed.

Taking down old unserviceable point wiring from existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket, light fittings etc and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc complete all as directed.

Material and labour of point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated un-sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm min dia and PVC conduit fittings such as tees, bends, elbow, reducers including cutting & chasing and FRLS PVC insulated unsheathed 1.5 Sqmm copper conductor mulistranded earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size with modular sheet for fixing modular switches/sockets etc for one light point / fans point controlled by one 1-way switch complete all as directed.

Per Point

Description all as per srl item no. 161.00 here-in-before but with 1.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for one socket outet point 5 amps on the independent board..

Description all as per srl item no. 161.00 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire independent board complete all as directed.

Description all as per srl item no. 156.00 here-in-before but with 4.0 sq mm FRLS copper wire with 4.0 Sqmm FRLS copper earth wire independent board complete all as directed.

S & F modular socket two-in-one, 6 Amp universal type, 02 module size complete all as directed.

S & F modular Socket, 16 Amp, multipurpose shutter type, 02 module size complete all as directed.

S & F Modular switch 16 Amp, 1 way, 1 module size complete all as directed.

Supply and fixing Ceiling rose, insulated body, 3 terminal, 240 volts, complete all as directed.

Material and labour for replacement of submain wiring complete with 2 x 4.0 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 4 sqmm( same specification ) as earth wire in and including PVC conduit of 25 mm dia min , medium grade complete all as directed.

Description all as per srl item no. 171.00 here-in-before but Material and labour submain wiring complete with 2 x 16 sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 16 sqmm as earth wire in and including PVC conduit of size 25 mm dia, medium grade and conduit fitting such as tees, bends, elbow, reducers etc complete all as directed.

S&F of Recess/Surface mounting 2x2 (Feet) square flat panel ultra slim scoop LED light 36 W warm/cool white with driver/transformer etc suitable for Grid ceiling/Gypsum board/POP ceiling incl making electric connection complete as as directed.

S & F of LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 10 Watts, cool/warm white as per site requirement complete all as specified and directed.

Supply and fixing of MCB 'C' Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.

S&F isolator SPN 40/63amp complete all as directed.

S&F XLPE insulated armoured heavy duty U/G aluminium conductor cable served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and overall PVC sheathed of size 25 Sqmm 4 core.

Description all as per srl item no. 181.00 here-in-before but size of cable 10 Sqmm 2 core, complete all as directed.

S & F of energy efficient LED fittings 45W LED suitable for building security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed.

Supply and fixing of street light fitting bracket, 1.0 mtr long made out of galvanized iron pipe of 25 mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.

Earthing complete with galvanised steel earth plate electrode 600mmx600mmx6.3 mm thick burried in ground vertically to a depth not less than 2.25 meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below the ground level, earth plate surrounded 15 cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron earth lead of size 4 mm by means of galvnised nuts, bolts and washers. GI wire of 4 mm dia laid in 15 mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor).

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm and depositing the old U/s item to MES store yard.

S&F of MCB SPN B Curve type, 10 KA, 63 Amp, with over load and short circuit protection complete all as directed.

M&L for sand cushioning to under ground cable provided with layers of snad(8 cms deep before laying the cable and 15 cms deep after laying) complete allas specified and directed at site by Engineer-in-Charge.

Supply and laying burnt bricks class - B for protection of cable complete all asspecified and directed at site.

S&F of instant heating Geyser 03 liter capacity vertical type with steel tank and glass inner linen complete including fasteners (02 No) for hanging and CP and PVC connection for inlet and outlet upto stop cock complete all as specified and as directed.

S&F of LED bulk head fitting 10W with inbuilt driver complete all as specified and directed.

Supply and fixing lamp holder PVC/ polycarbonate type suitable for batten fittings, connections incl lamp complete all as directed.

Supply and fixing LED light fitting 1X20 W,220V AC decorative with driver,holder including LED tubelight connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose complete

S & F of Modular Fan regulator step type, 120 watts,complete all as directed.

Please Enable Macros to View BoQ information