Loading
Loading…
Loading…
Tender Value
₹1.0 Cr
EMD Value
₹2.0 L
Closing Date
24 Aug 2026, 5:00 pmDue today
SM_TENDER CELL
GNIDA OFFICE
Internal Electrification of 6 Percent abadi in village Palla, Greater Noida.
2026_GNIDA_1176466_5
SM/(E-TENDER CELL)/2026/787 DATED-10.08.2026
Open Tender
Electrical Works
Percentage
365 days
GREATER NOIDA
REFER TENDER DOCUMENT
5 documents required · 5 mandatory
₹2,190
₹2.0 L
12 Aug 2026
12 Aug 2026
27 Aug 2026
12 Aug 2026
24 Aug 2026
12 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1BOQ | |||||
| 1.01 | Supply & erection Section Double pole structure on ST pole 410 SP-62 with 1/6 over length of poles grouted with cement concrete in 1:3:6 (one cement: 3 coarse sand :6 Stone ballast) including plingthing of pole 30 cm above grade level, plastering of plinth including excavation & back filling etc. The double pole structure consist of 100X50X6mm 2.50 mtr. & 75X40X6mm 2.50 mtr. M.S. channel and bracings with M.S. clamp packing piece Nuts Bolts etc. The rates includes all materials labour T&P etc. Required for proper completion of work as per direction of E/1. GNIDA-SOR-2024/28 | 11 | Nos. | 66,298 | ₹7,29,278 |
| 2 | Supply & erection of Four pole Structure on S.T. Pole 410 SP-62 with 1/6 over all length of poles grouted in cement concrete 1:3:6 (1 cement: 3 Coarse sand 6 stone ballast) concrete plinthing of pole 30 cm above ground level plastering of plinth, including excavation & back filing etc. The four pole structure consist of four nos. 100X50X6 mm size & four Nos. 75X40X6 mm size & 2.50mtr. long cross arms and 4 Nos. bracings complete with M.S. clamps backing pieces, Nut bolt etc. The rates includes all material labour T&P etc. Required for proper completion of work as per direction of E/I GNIDA-SOR-2024/29 | 2 | Nos. | 1,47,764 | ₹2,95,528 |
| 3Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc.The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc.The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only. UPPWD-2018/802 | |||||
| 3.01 | Incoming 200 Amp TPN 1 No. | - | - | - | - |
| 3.02 | Outgoing 100 Amp TPN 1 No. 63 Amp TPN 3 No. | 11 | Nos. | 80,900 | ₹8,89,900 |
| 4Supply & laying of Aluminium conductor, XLPE insulated, armoured served, sheathed cable 1100 V grade at a depth of 750mm below ground level over a cushion of 75mm. thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the E/I, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. UPPWD-2018/501 | |||||
| 4.01 | 4CX16 Sqmm. | 1,800 | Mtr. | 343 | ₹6,17,400 |
| 4.02 | 3.5CX50 Sqmm. | 410 | Mtr. | 492 | ₹2,01,720 |
| 4.03 | 3.5CX70 Sqmm | 520 | Mtr. | 613 | ₹3,18,760 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.75 MB
Tendernotice_2.pdf
PDF • 0.18 MB
PreQ_Inte_Elec_6_Abadi_Vill_Palla.pdf
Tender Documents • 1.53 MB
BOQ_2210908.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].