Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.8 LAccepted-AOC WZ143 A 7 A S 4 43 GALI NO 2 OLD MAHABIR NAGAR NEW DELHI 110018 | NEW DELHI | NEW DELHI | DELHI | 110018 | L1 | Accepted-AOC DUE TO L1 | |
| 2 | L2₹22.0 L+₹76,250 (3.59%)Rejected-Finance A SECTOR BHAGWATI BHAVAN VIJAY NAGAR LAL GHATI BHOPAL M P 462030 | BHOPAL | BHOPAL | MADHYA PRADESH | 462030 | L2 | Rejected-Finance HIGHER RATE | |
| 3 | L3₹24.3 L+₹3.1 L (14.6%)Rejected-Finance 29 108 A STREET NO 10 VISHWAS NAGAR DELHI 110032 | DELHI | SHAHDARA | DELHI | 110032 | L3 | Rejected-Finance HIGHER RATE | |
| 4 | L4₹27.4 L+₹6.2 L (29.2%)Rejected-Finance | L4 | Rejected-Finance HIGHER RATE |
Tender Value
Refer Docs
EMD Value
₹56,000
Closing Date
2 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NEW DELHI
GE NEW DELHI, SP MARG NAR ABHM GATE NO 5
WELCOME MAINT INCLUDING CONNECTED WORKS IN MD OFFICERS ENCLAVE IN THE AOR OF AGE B/R SP MARG UNDER GE NEW DELHI
2024_MES_648347_1
NIT No GE/ND-93/2023-24
Open Tender
Civil Works
Item Rate
330 days
GE NEW DELHI
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE NEW DELHI
₹56,000
Yes
28 Jun 2024
29 Mar 2024
4 May 2024
29 Mar 2024
2 May 2024
20 Apr 2024
Amount
M&L for preparation of old decorated plastered or unplastered surfaces of walls including cornice, pillaster, etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds moss and efflorescent salt and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of wall complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of walls including complete removal of existing surfaces by using mechanical scrapers and filling holes with putty etc and applying two coats of white wash on old decorated surfaces of wall complete all as specified and directed.
All as per item No 1 herein before but as on ceiling complete all as specified and directed.
Complete removal of existing old treatment on surface from walls using mechanical scrapper only and filling holes of nails with putty etcand applying a coat of uniform ( average 1.50 mm thickness) of cement base wall cae putty of approved make (Birla/JK) to the entire surface of walls surfaces finished even and smooth and then applying a coat of alkali resistant primer over putty surface and finally applying two coats of oil bound distemper on wall surface to give an even and smooth surface complete all as specified and directed. Make :- Asian Paints(Royale), ICI Dulux/Nerolac paints/Berger (Bishon). Distempering shall be carried out by paint roller only.
M & L for applying one coat of distemper oil emulision (O.B.D) white or tinted (As approved) on walls/vertical surfaces including preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces complete all as specified and directed. Note: Distempering shall be carried out using paint roller only.
M & L for applying one coat of distemper oil emulision (O.B.D) white or tinted (As approved) on ceiling surfaces including preparation of old decorated surfaces of ceiling by washing, rubbing down and stopping of distempered and painted surfaces complete all as specified and directed.
M & L preparation of old painted surfaces of wood or wood based materials of any discription not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
All as per item No 07 above but two coat complete all as specified and directed.
M&L for Preparatiopn of old painted surfaces of steel and iron surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified and directed.
All as per item No 9 above but two coat complete all as specified and directed.
M&L for Preparing old painted surfaces of brick,stone,concrete, asbestos cement or plaster surfaces of any description over 10 cm girth or width, not otherwise described and painting with one coats of synthetic enamel paint complete all as specified and directed.
M&L for one or more coat of french polish on old surfaces of any description, width or girth incl cleaning and preparing old wooden surfaces complete all as specified and directed.
M&L for taking down cement or cement lime plaster any description incl racking out joints, hacking for key , scrubbing down with water etc including removal of debrish from the MOD land complete all as specified and directed.
M&L for 15mm thick ready mix plaster in patches of (Make Ultra tech) on any surfaces of brick/concrete includidng aapplication of bonding coat as per manufacturers instruction including finished even and smooth complete all as specified and directed.
M&L for 10 mm thick ready mix plaster in patches of (Make Ultra tech) on any surfaces of brick/concrete includidng aapplication of bonding coat as per manufacturers instruction including finished even and smooth as in ceiling/soffits complete all as specified and directed.
M&L for preparation of new plastered or unplastered surfaces of walls and applying three coat of white wash complete all as specified and directed.
M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.
M& L for applying two or more coats of oil bound distemper on newly plastered surfaces of walls including a coat of 1.50 mm thick (average) wall care JK putty to give an even and smooth surface including preparation of new surfaces all as specified and directed.(Note-Payment shall be made for two coats only ) complete all as specified and directed. Make Asian paints (Royale) ICI Dulux /Nerolac paints /Berger (Bishon). Distempering shall be carried by using paint roller through authrosed applicator only.
M&L for touch up of distemper applying ( two or more coat) on walls area of distemper not exceeding 4 sqm ,match to existing shade of wall including preparation existing surface complete all as specified and directed.
M&L for refixing of shutters of any description in same opening after taking down for resecuring ,easing, repairing etc exc 1.0 sqm but n exe 2.0 sqm complete all as specified and directed.
S&F in repair stainless steel drappery rods 25mm dia confirming to Gde 340 and having wall thickness 1.40 mm (minimum) with two number brackets and two numbers of knob for each curtain rod ( length varying from 1.1. to 2.50 RM) fixed to brick/concrete wall knobs on each end of curtain rod complete all as specified and directed.
Dismantling of Stone slabs and tiles of any description or thickness in floors, approns, vertical surface of walls etc complete all as specified and directed.
Dismantling timber scantling as in fillets , rails , post ,rafters, purlins, etc under 40 Sq. cm in section in unframed work complete all as specified and directed.
M&L for Cutting chases in Brick walls, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth complete all as specified and directed.
M&L for Marble work 18 to 20mm thick, Granite, (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade, bedding layer of cement mortar 15 mm thick in CM 1:6 complete all as specified and directed.
M&L for Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 3 Sq.cm and not exceeding 6 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails complete all as specified and directed.
M&L for Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 6 Sq.cm and not exceeding 13 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails complete all as specified and directed.
M&L for Beads of 2nd class hard wood, straight (any size) for glazed or gauged joinery, renewed, including mitres etc,. and removing old beads as in repairs complete all as specified and directed.
S&F in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised ,Width of flap (when open), 40 mm complete all as specified and directed.
S&F in repair 40 mm dia , cupboard knobs fixed with nut , screw and washer of stainless steel complete all as specified and directed.
S&F in repair Tubular towel rail 20mm dia 'D' type brass chromium plated 60 cm long between flanges complete all as specified and directed.
S&F in repair Ball catcher with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.
S&F in repair Double aluminium channel size 10x20x2mm, complete all as specified and directed.
S&F in repair MS roller with "C" shape stapple, chromium plated for 5.00 mm thick sheet glass, complete all as specified and directed.
S&F in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
S&F in repair 18/19 mm thick prelaminated particle board, interior grade,prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in CB shutter, showcase frame, shelves, with 6 mm thick teak wood liping alround incl polishing to lipping complete all as specified and directed.
M&L for Glazing with plain sheet glass, ordinary quality, 4 mm thick and glazing with oil putty or aluminium or PVC / wooden beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.
M&L for Glazing with 5.5mm thick sheet glass, ordinary quality, of any size as in aluminium window and including grinding of edges for showcase sliding shutter and shelves incl fixing brakets complete all as specified and directed.
M&L for Glazing with figured glass (Frosted), pin head type, 4 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, oncrete or brick surrounds, or aluminium glazed with putty or fixed with beads complete all as specified and directed.
Taking up or down steel tubing and connection incl cleaning for refixing or removal to store for 15 mm dia pipe complete all as specified and directed.
M&L for Mild steel galvanized steel tubing of 15 mm bore with screwed socket joints as in concealed /open pipe work , medium grade, together with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors complete all as specified and directed.
S&F in repair Bib taps, cast copper alloy, chromium plated, fancy type, long body with crutch or butterfly handle, screwed down screwed for iron pipe, 15 mm bore complete all as specified and directed.
S&F in repair Bib tap, 15 mm bore, standard of PTMT any colour high pressure screwed for iron pipe complete all as specified and directed.
S&F in repair Brass chromium plated toilet paper holder, fixed to wall with CP brass screws complete all as specified and directed.
S&F in repair Stop valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) of size 15mm bore, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete complete all as specified and directed.
S&F in repair Stop valves (angle valve type), cast copper alloy, fancy type chromium plated of size 15mm bore, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed.
S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.
S&F in repair Toughened glass, 5.5mm thick, bathroom corner shelf of size 300mm with stainless steel railing and stainless steel fasteners fixed on wall complete all as specified and directed.
S&F in repair Vitreous China wash down water closet pan (Pedestal Pattern) and trap (standard pattern) white including fixing bolt complete all as specified and directed.
S&F in repair Plastic water closet seat, white , closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointing complete all as specified and directed.
S&F PVC (Plastic polymer Cistern) valve less, Syphonic action type, flushing cistern of capacity 10 liters, low level, White with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete including taking down by dismantling the existing unserviceable cistern of any description complete all as specified and directed.
S&F in repair Health faucet Chromium plated brass with 1.50 m long flexible pipe for WC complete all as specified and directed.
S&F in repair Vitreous, China wash basin, white , flat back , size 550x 450mm excluding taps, waste chain and plug and porcelain stopper but including the brackets, 32mm dia brass chromium plated waste coupling and PVC waste pipe complete all as specified and directed.
S&F in repair Sink with drainage board made of stainless steel 1 mm thick kitchen sink with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall or including cantilever bracket and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm inculding taking down the old sink of any description complete all as specified and directed.
S&F in repair Brass CP mixer (Central hole basin mixer) , for mixing hot & cold water screwed down for iron pipe 15 mm bore complete all as specified and directed.
S&F in repair PVC mirror cabinet of size 330 mm x 430 mm with openable single looking mirror with PVC inner & outer shelves of any colour, complete all as specified and directed.
S&F in repair Brass chromium plated soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F in repair Glass self assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromoium plated bracket guard and railing 60 cm long complete all as specified and directed.
S&F in repair Brass chromium plated shower rose with swivel joints, 125 mm dia with CP neck including fixing to steel pipe or union 15 mm nominal bore complete all as specified and directed.
Demolition of cement concrete of any description and in any position, provided for and removing rubbish out of MoD land complete all as specified and directed.
Supply only water proofing compound (PIDIPROOF-LW PLUS) or equivelent as approved by GE complete all as specified and directed.
M & L for Plain cement concrete (1:5:10) type E-2 using 40mm brick course aggregate as in filling under floor as in sunken portion complete all as specifed and directed.
M&L for 40mm thick PCC 1:2:4 type B-0 (using 12.5mm graded aggregate) as in flooring, finished fair and even, mixed with water proofing compound Dr FIXIT PIDIPROOF-LW PLUS or equivalent (as per manufacturer's instruction) as approved by GE complete all as specified and directed. Note : WPC shall be measured and paid separately
M&L for 15mm thick cement plastering on brick or concrete surfaces in CM 1:3 finished even & smooth without using extra cement mixed with water proofing compound Dr FIXIT PIDIPROOF-LW PLUS or equivalent (as in sunken per manufacturer's instruction) as approved by GE complete all as specified and directed. Note : WPC shall be measured and paid separately
S & F spun cast iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint laid in trenches or floors, including taking down old unserviceable CI pipes complete all as specified and directed.
S & F spun cast iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint fixed to wall on any height of building incliding taking down old unserviceable CI pipes complete all as specified and directed.
S & F spun cast iron soil, waste and vent pipe, 100mm bore, in any length with or without ear with cement joint laid in trenches or floors, including tacking down old unserviceable CI pipes complete all as specified and directed.
S & F spun cast iron soil, waste and vent pipe, 100mm bore, in any length with or without ear with cement joint fixed to wall on any height of building incliding tacking down old unserviceable CI pipes complete all as specified and directed.
S&F in repair stack clamps size 50mm x 5mm, flat iron and 16mm dia round iron stays, including bolt and nut and securing ends of stay to wall or roof 75mm bore pipe complete all as specified and directed.
S&F in repair stack clamps size 50mm x 5mm, flat iron and 16mm dia round iron stays, including bolt and nut and securing ends of stay to wall or roof 100mm bore pipe complete all as specified and directed.
S & F in repair CI bends 75mm dia (any radius), diminishing pieces or tapers( larger bore measured), with oval access door complete all as specified and directed.
S&F 50mm wide and 5 to 6 mm thick rubber beading( door seal) fixed to door shutter with nails complete all as specified and directed.
S & F CI in repair bends 100mm dia (any radius), with duck's foot or heel rest complete all as specified and directed.
S&F in repair 100mm bore CI branch pieces,single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches,with oval access door complete all as specified and directed.
S&F in repair CI nahani trap with grating including jointing to waste pipe , dia of outlet 75mm fixed in PCC 1:2:4 type B1 all as specified and directed.
S&F in repair 50 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
M&L for Glazed ceramic walls tiles coloured (300 x 200 mm/ 350x250mm/ 450x300mm/ 300x450), 6/7mm thick, for works on vertical surfaces such as skirting/dados of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10mm thick on fair faces or other than fair faces of brick work in cement mortar 1:4, finished even and fair as in backing layer including dismantling existing broken/cracked tiles including removing rubbish off the premises complete all as specified and directed.
M&L for Non skid ceramic floor tiles 7 to 8 mm thick (square/rectangular) coloured, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match laid over screed bed or bedding layer in cement mortar 1:6, 15 mm thick for laying floor finishes including dismantling broken/cracked tiles and removing of rubbish off the premises complete all as specified and directed.
M&L for light shade Vitrified ceramic tiles 10 mm thick ( square / rectangular) polished , area of each tiles not exe 0.36 sqm , in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement incl incl screed bed or bedding 15 mm thick in CM 1:6 for laying floor finished including dismantling broken/cracked tiles and removing rubbish off the premises complete all as specified and directed.
All as all as per item No. 80 above but on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.
M&L for touch up of distemper (applying two or more coat ) on walls area of distemper exceeding 4 sqm not exceeding 12 sqm ,match to existing shade of wall including preparation existing surface complete all as specified and directed.
S&F in repairs stainless steel plate rack of size 900 X 775 X 250 mm, made out of 1.00 mm thick steel sheet fixed to walls incl rawl plugs, drilling etc complete incl taking down old wooden plate rack of make- Shakti model No KR-567 complete all as specified and directed..
M&L for treating at points of contact of wood work by chemical emulsion ( in oil or kerosene based solution) @ 0.50 Ltr/hole by drilling 6 mm dia holes at the down ward angle of 45 degree a 150 mm centre to centre and sealing the same to match the specification of existing finishes complete all as specified and directed.
M&L for taking down existing steel rolling shutter incl hood cover pull & push type not exc 12 Sqm area of clear opening and cleaning the sides of shutters suspensions shafts,anti-guide channels and greasing all the moving parts of rolling shutters and straightening rolling shafts and replacement of any necessary parts required to make the shutters moving smoothly and entire rolling shutters shall be made functional upto the entire satisfication of Engineer -in-Charge and refixing the same incl hood cover complete all as specified and directed.
S&F in repairs floor door stoppers of aluminium alloy body and tounge, anodised,with hard drawn steel spring over all length of cover plate is 140 mm complete all as specified and directed.
S&F in repair MS Night latch of 100mm size 4 lever complete all as specified and directed.
S&F mild steel framed work as in grills, gratings etc with end of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed ballustered, walk ways, railing and similar works confirming to Fe 290 Gde E-165 including necessary welding required at site to increase the existing railing height in balacony of Md Offrs Qtrs complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not other wise provided for as in covers of water tanks complete all as specified and directed.
M&L applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of new steel surfaces complete all as specified and directed.
S&F in repair wire netting of stainless steel wire 1.4 mm dia fixed with tinned tacks of stainless steel wire staple size of mesh 12mm complete all as specified and directed.
M&L Preparation of New wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each complete all as specified and directed.
Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) exe 1.5 Sqm but not exceeding 4.0 Sq.m each complete all as specified and directed.
Refixing of shutters in same opening of any descrption after easing and adjusting , n exc 1.00 Sqm complete all as specified and directed.
Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed.
M&L for Plain Solid, straight chowkats and frames of second class hard wood (suitable for joiner’s and carpenter’s work), wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S&F Stainless steel fastner of size 200 to 250mm for fixing wooden door frame and like in postion complete all as specified and directed.
S&F MS flat iron as in hold fast, bands,straps, supports or stays for rain water, ventilating pipes, including bolts, if required hook (stay), heavy, for large gates;hook and pintle hinges large hasps andstaples; chains, hand madesliding bolts; clamps; hold fasts; wall ties, hooks for hangingfans; plainangle cleats forsecsuring purlins to wood trusses orrafters; knee piece inserts; twoway and three way straps, plate washers and similar small articles conforming to Fe-290Gde-E-165 complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (20mm graded agg) as in anchorging hold fast etc bed plate etc complete all as specified and directed.
S&F second class hard wood 35mm thick glazed and skelton door shutters, open rebated and prepared to receive glass, gauge etc( without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, fixed to chowkats, sizes of members of shutters complete all as specified and directed.
S&F 35mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side with teak wood lipping on edges of shutter complete all as specified and directed.
S&F aluminium sheet, plain, 0.5 mm thick , including taking down old sheet from doors complete all as specified and directed.
S&F Solid PVC Door frame of size 50 mm x 95 mm made out of 5 mm single side prelam PVC sheet reinforced with M.S tube supplying and fixing in opening as per specification and drawing complete all as specified and directed.
S&F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet reinforced with M.S tube supplying and fixing in opening as per specification and drawing complete all as specified and directed.
S&F Factory made solid PVC moulded door shutters (with particle board core), 28 to 30mm thick (Stiles) with 2, 4, or 6 raised panel (as ordered) design with 2mm thick moulded prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face, supply and fixing in frame at site as per the specification and drawing complete all as specified and directed.
S&F Factory made solid PVC door shutter 30mm thick (stiles),wire gauzed i.e. panel will be of wire gauzed in lieu of PVC sheet panel both side prelam. The wire gauzed shall be wrapped an additional square 8mm mild steel solid tube & this tube shall be welded to mild steel tubes. The wire gauzed shall be steel wire cloth 0.40mm nominal dia of wire and average width of aperture 1.40mm fixed and strectched to tighten firmly and drawing on Sl Page 159 of SSR (Part - II) complete all as specified and directed.
S&F Factory made solid panel PVC window/ shutter 30 mm thick (style),but fully glazed i.e. glass pane used instead of 5 mm single side prelam PVC sheet panel. Shutter frame made out of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded single side prelam PVC 'C' channel having a PVC sheet strip of 20 mm widthstuck inside with solvent cement for stiles and single side prelame PVC sheet for top & bottom rail on either side & as gap insert for top rail & bottom rail.Glass pane to be fittedwith suitable PVC sheet beading and joined together with solvent cement complete all as per specification & drawing complete all as specified and directed.
S&F Factory made solid panel PVC window shutter 30 mm thick (style),but fully wire gauzed i.e. wire gaized used instead of 5 mm single side prelam PVC sheet panel. Shutter frame made out of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded single side prelam PVC 'C' channel having a PVC sheet strip of 20 mm widthstuck inside with solvent cement for stiles and single side prelame PVC sheet for top & bottom rail on either side & as gap insert for top rail & bottom rail.The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be streched to tighten firmly complete all as per specification & drawing complete all as specified and directed.
S&F Aluminium anodized barrel tower bolt of 200 mm length of extruded section complete all as specified and directed.
S&F Aluminium alloy anodised sliding door bolt, of size 300mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy, complete all as specified and directed.
S&F Stainless steel butt hinges of size 75mm fixed complete all as specified and directed.
S&F Stainless steel butt hinges of size 100mm fixed complete all as specified and directed.
S&F in repairs hellical door spring 150 mm long mild steel ordinary rat rail rod pattern door springs including roller and roller plate complete all as specified and directed..
S&F Aluminium handles,cast type, anodised 100 mm long, complete all as specified and directed.
S&F Aluminium handles,cast type, anodised 150 mm long, complete all as specified and directed.
S&F Stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed. Note :- The rates for item No 1 to 118 deemed to be included for cleaning of complete house such as floor (includes application of pouncha with wet cloths), removing of all spots on door, window and wall and floor tile in kitchen and bath room after distempering/painting, cleaning of glass paes for door & windows including garges shutters & its shutter proper and over cover the furniture properly during OBD & painting of tarpoline cover paints in different room and lay out of all furniture items proplerly after completion of entire process complete all as specified and directed by Engineer In Charge.
JYOTI ENTERPRISES
A N BUILDERS
B S R Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .