GeM

AOC

Goods

Medical Centrifuge

PRODUCT

Medical Centrifuge

Office Of Dg (ls)

Central Delhi, Delhi

Amount: Refer DocsCloses: 19 Sept 2019Closed

Timeline

Published9 Sept 2019
Closed19 Sept 2019
Awarded19 Sept 2019

Bids

8 Bids19 Sept 2019

#	Company	Offered Item	Amount	Rank	Status
1	SCIENTIFIC SYSTEMS L1₹86,200Qualified Make: REMI Model: REMI R-8M PLUS WITH S 24-15 125 SAVOY ESTATE STAFF ROAD SAVOY ESTATE AMBALA HARYANA 133001 \| AMBALA \| HARYANA \| 133001	Make: REMI Model: REMI R-8M PLUS WITH S 24-15	₹86,200	L1	Qualified
2	JAYANTI SCIENTIFIC INSTRUMENTS L2₹92,822+₹6,622 (7.68%)Qualified Make: REMI Model: REMI R-8M PLUS WITH S 24-15 7 U A M S JAYANTI SCIENTIFIC INSTRUMENTS JAWAHAR NAGAR PISTA NIWAS BUILDING NEW DELHI DELHI 110007 \| NORTH DELHI \| DELHI \| 110007	Make: REMI Model: REMI R-8M PLUS WITH S 24-15	₹92,822+₹6,622 (7.68%)	L2	Qualified MSE, Category: General
3	REMI SALES AND ENGINEERING LIMITED L3₹97,600+₹11,400 (13.2%)Qualified Make: REMI Model: REMI R-8M PLUS WITH S 24-15 11 CAMA INDUSTRIAL ESTATE GOREGAON EAST MUMBAI MAHARASHTRA 400063 \| MUMBAI SUBURBAN \| MAHARASHTRA \| 400063	Make: REMI Model: REMI R-8M PLUS WITH S 24-15	₹97,600+₹11,400 (13.2%)	L3	Qualified
4	BIOMOLE INDIA Disqualified Make: REMI Model: REMI R-8M PLUS WITH S 24-15 15 NEAR SEC SCHOOL S 13 BEHIND PANCHAYAT SAMITI TUNGA BASSI JAIPUR RAJASTHAN 303302 \| DAUSA \| RAJASTHAN \| 303302	Make: REMI Model: REMI R-8M PLUS WITH S 24-15	-	-	Disqualified
5	DILIGENT TRADING CORPORATION Disqualified Make: REMI Model: REMI R-8M PLUS WITH S 24-15 1624 HANUMANTAL HANUMANTAL POST OFFICE JABALPUR JABALPUR MADHYA PRADESH 482002 \| JABALPUR \| MADHYA PRADESH \| 482002	Make: REMI Model: REMI R-8M PLUS WITH S 24-15	-	-	Disqualified

Tender Value

Refer Docs

EMD Value

Exempted

Closing Date

19 Sept 2019, 1:00 pmClosed

Work Description

Medical Centrifuge

Tender Information

Tender ID

1384373

Reference Number

GEM/2019/B/347232

Product Category

Medical Centrifuge

Period of Work

30 days

Location

Delhi; Central Delhi

Bid Type

PRODUCT

Source Website

Subscribe to view

Documents Required

16 documents required · 16 mandatory

RequiredExperience with Government

RequiredOEM Authorization Certificate Bid to RA enabled No Medical Centrifuge ( 2 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Standards Conformity to standards CE CE Certificate number and date - * Performance Parameters Purpose Separating Serum from blood or for urine sedimentation * Centrifuge Design Bench Top * 1/5 Weight including Default Rotor in kg 10 * Auto cut off Yes * Timer provided Yes * Maximum RPM 2800 * Number of steps for RPM variation 7 * Incremental Steps of Variable RPM 400 * Type of Motor Brushless (without carbons) * Maximum Noise level whemn working at 1 meter distance in db 70 * Ambient operating Temperature range in Degree centigrade Celsius and humidity range 0 to 50 degree centigrade and Relative humidity 15 to 90% * Rotor imbalance diagnostics and automatic stop if required Yes * Facility to ensure that In case Machine is runing and lid is opened with manual lock by user

Requiredmachine shall stop Yes * Maximum Timer Set range 60 minutes * Timer settings Provided interval of 10 secondsup to 1 minute and over 1 minute up to 60 minutes in interval of 1 minute * Display LCD * Speed Controller Microprocessor controlled pre programmed speed controller * Speed Control Accuracy in case of set speed (Plus minus RPM ) 50 * Rotor configuration Swing Out Rotor Swing Out Rotor Rotor Feature with reference to Autoclavability Autoclavable Rotor @ 121 Degree Celsus

Required16x15ml

RequiredPower supply Single phase

Required230 V 50 HZ AC Source * Power concumption in watts 300 * Length of the Medical Centrifuge in mm 190 * Width of the Medical Centrifuge in mm 300 * Height of of the Medical Centrifuge in mm 250 * Length of Power cord in meters 2 * The Equipment shall be installed and demonstrated before Acceptance installation and demonstration No(No installation and demonstration required and consignee can install) * Accessories Spanner to tight or loose Nut of Rotor on Motor shaft head puller

Requiredspare rotor nuts

Requiredfuse-2

RequiredInstruction Manual Book

Requiredinstallation CD * Warranty in Years 1 1 Material Parameters Assembly Material for manufacture of Medical Centrifuge Consists of Die cast Aluminum

RequiredAluminum sheet

RequiredStainless Steel

RequiredCRC Steel

RequiredPlastic and Rubber * Lid Material of Medical Centrifuge C.R.C Steel Finish with Powder Coating or stove painting/ABS Plastic of injection moulding * Body Material of Medical Centrifuge C.R.C Steel Finish with Powder Coating or stove painting/ABS PLASTIC OF injection moulding * Centrifuge Bowl material of Medical Centrifuge 304 Quality Stainless Steel Moulded * Material of Rotor Aluminium

Requiredif no certificate provided put NA - * Copies of all certifications and reports to be provided to buyer on demand at time of supplies Yes * * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters

Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.

Purchase Preferences

MSE EMD ExemptionStartup Exemption

Items & Quantities

Item	Delivery Location	Qty	Delivery
Medical Centrifuge	-	2	-

Total: 2

Fee & Financial Details

EMD Fee Amount

Exempted

Important Dates

Last Activity

19 Sept 2019

Published

9 Sept 2019

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Documents

bid_1384373.pdf

GEM_BID

Work Item Documents

termsCondition.pdf

OTHER

2657c7ca70287299b5181580fdb5a7ab.pdf

OTHER

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…