Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹6.5 L
EMD Value
₹12,920
Closing Date
6 Sept 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Aircraft Overhaul Division, Nasik
Aircraft Overhaul Division, Nasik
Filling of balance 04 Nos turn table in 065 shop in factory area in HAL Nasik.
9196
NK/FW/C-1590/2024-25
Works
Mig Complex - Aircraft Overhaul Divn - Nasik - Works - Contracts
₹0
₹12,920
6 Sept 2024
9 Aug 2024
9 Aug 2024
6 Sept 2024
HINDUSTAN AERONAUTICS LIMITED AIRCRAFT OVERHAUL DIVISION, NASIK WORKS AND SERVICES DEPARTMENT
Name of work : Filling of balance 04 Nos turn table in 065 shop in factory area.
Tender No.:NK/FW/C-1590/2024-25
NIT NO. : NK/FW/526/2024-25
Estimate Value : Rs. 6.46 Lakhs
PRICE BID/ COMMERCIAL BID PART-B
Name of the Tenderer:
Sl. No Specification Quantity Unit Rate in Figs [Excluding GST] Rate in words Amount
Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The tenderer shall abide by prevailing GST act. (2) This BOQ specifications have to be read in conjunction with detailed technical specification and tender drawings if any. (3) The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered. (4) The quoted percentage for the works mentioned below, shall be taken into consideration for evaluation of the tender. The lowest offer (L-1) will be determined considering the total amount including GST based on the quoted percentage.
1 Demolishing cement concrete/ Nominal concrete 1:3:6 /richer mix (i/c equivalent design mix) manually/ by mechanical means including of any description and in any position not otherwise specifically provided for, including trimming the sides and taking out the debris and stacking for further disposal of unserviceable material, debris and rubbish including loading, transporting, unloading to approved dumping ground beyond 50 m initial lead, for all leads including all lifts involved etc as per direction of EIC. 1.00 Cum 2263.74 Rupees Two Thousand Two Hundred Sixty Three and Seventy Four Paise Only 2263.74
2 Demolishing RCC work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material of any description and in any position not otherwise specifically provided for, including trimming the sides and taking out the debris and stacking for further disposal of unserviceable material, debris and rubbish including loading, transporting, unloading to approved dumping ground beyond 50 m initial lead, for all leads including all lifts involved etc as per direction of Engineer - in - charge. (EIC) 1.00 Cum 3200.89 Rupees Three Thousand Two Hundred and Eighty Eight Paise Only 3200.89
3 Dismantling carefully the existing MS steel work in built up sections consisting of angles, tees, flats, channels , plain/chequered plates, etc including all gusset plates, bolts, nuts, cutting rivets, welding etc. at any position and stacking the serviceable materials within 50m and disposal of unserviceable material, debris and rubbish to a distance not exc. 50m all complete as directed by EIC. 20000.00 Kg 4.74 Rupees Four and Seventy Four Paise Only 94805.08
4 Excavating, supplying, stacking and filling of local earth (HAL moorum free of cost) by mechanical transport up to a lead of 5 km, foundation trenches, plinth, sides of foundations, floor etc. including spreading and levelling, rolling/ramming and watering of the earth in layers not exceeding 20 cm etc., complete for all lift as specified and directed by EIC. 37.00 Cum 587.71 Rupees Five Hundred Eighty Seven and Seventy Paise Only 21745.18
5 Supplying, laying, spreading and compacting 90 mm to 45 mm size stone aggregate with in uniform thickness, hand picking, compacting in layers not exceeding 20 cm in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to required density by machine ramming in level complete as specified and as directed by EIC. 47.00 Cum 2634.49 Rupees Two Thousand Six Hundred Thirty Four and Forty Nine Paise Only 123821.06
6 Providing and laying in position cement concrete 1:2:4 (20 mm graded aggregate) including mixing, laying in bays compacting, curing, finished to true level and line etc.complete all as specified and as directed by EIC. 12.00 Cum 6609.93 Rupees Six Thousand Six Hundred Nine and Ninety Two Paise Only 79319.14
7 Providing and laying in position READY MIXED DESIGN MIX CEMENT CONCRETE (RMC) for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, compacting, curing, finishing the surface of concrete smooth/ hacked as required, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the EIC; for Concrete of M25 grade with minimum cement content of 330 kg /cum. 23.00 Cum 7974.32 Rupees Seven Thousand Nine Hundred Seventy Four and Thirty Two Paise Only 183409.46
8 Providing and laying in position TMT deformed MS reinforcement of grade Fe-500D, for R.C.C. work including straightening, cutting to required length, bending, hooking, cranking, placing in position and binding with MS wire (annealed) not less than 0.9 mm Dia. or securing with clips including necessary lapping, spacers/cover blocks complete all as specified and as directed by EIC. 400.00 Kgs 90.48 Rupees Ninety and Forty Eight Paise Only 36193.73
9 Removing and disposing dismantled steel material to a distance upto 2 km and depositing where directed from starting point including loading, unloading and stacking at the destination complete as specified and as directed by EIC. 20.00 Tonne 146.66 Rupees One Hundred Forty Six and Sixty Six Paise Only 2933.25
Sub-Total (Excluding GST) Rupees Five Lakh Forty Seven Thousand Six Hundred Ninety One and Fifty Three Paise Only 547691.53
The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Basic Amount Put to Tender Select Above or Below Percentage in Figures [Excluding GST] Amount
Tenderer's Quote (Excluding GST) 547691.53 BELOW % 547691.53
Add 18% GST Rupees Ninety Eight Thousand Five Hundred Eighty Four and Forty Seven Paise Only 98584.48
Grand Total (Including GST) Rupees Six Lakh Forty Six Thousand Two Hundred Seventy Six Only 646276.01
Note: (i) The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered. (ii) The quoted rates in the bill of quantities are inclusive of all types of taxes, duties levies, fees and charges etc., imposed by Central/ State Govt. and local bodies Compensation Cess, Labour Cess (if any), Custom Duty, royalties and other levies. It shall also include all other costs including loading, un-loading, insurance, transportation, testing and Certification expenses except GST . GST at the prevailing percentage is added in the BOQ at the end.
WARNING: PLEASE ENTER PERCENTAGE QUOTE
HINDUSTAN AERONAUTICS LIMITED
AIRCRAFT DIVISION, NASHIK
Pre-Qualification Profile
Tender Ref No. or Contract No.: NK/FW/C-1590/2024-25
Name of Work: Filling of balance 04 Nos turn table in 065 shop in factory area.
Estimated Amount in Rs: Rs. 6.46 Lakhs
Tender Notice no NK/FW/526/2024-25
Sl.No Description Details Remarks
1 Name of the Individual / Firm / Company: * Mandatory
2 Type of ownership
If Other, please specify
3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc. Related Document to be Uploaded to e-procurement portal.
4 Address for Correspondence:
5 PAN No.: Related Document to be Uploaded to e-procurement portal.
6 Contact details
Contact person name
Ph. No. with STD code
FAX No. with STD code
7 I.T Returns for past 03 years (Assesment Year)
2021-22 Related Document to be Uploaded to e-procurement portal.
8 Annual financial turn over during the last 3 years (Financial Year), ending 31st March 2023 [Annual financial turn over during the last 3 years should not be less than 30% of the estimated amount put to tender.] I. Attested complete set of financial documents for last three (3) years Viz. balance sheet, P & L account, Supporting schedules and notes to account certified by CA with UDIN II. Turnover certificate from Charted Accountant (CA) with UDIN. Related Document to be Uploaded to e-procurement portal.
YEAR Turn Over (Rupees in Lakhs)
9 ESI, GST & PF Nos. with proof
ESIC Registration No. with proof Related Document to be Uploaded to e-procurement portal.
PF Registration No. with proof
GSTIN Registration No. with proof
10 Bank(s) details: [Annexure E-5 to be uploaded in original]
Bank Account No. Related Document to be Uploaded to E- Procurement Portal. (Note:Original ECS dully sealed and signed by Bank along with cancelled cheque to be uploaded)
Name of the Bank
Type of Account
11 Latest Bankers Solvency Certificate from Nationalized or Scheduled Bank issued within a period of 12 months from the final date of Submission of Tender. (Should not be less than 40% of the Approx. estimated amount put to tender.)
Name of Bank & Branch Related Document to be Uploaded to e-procurement portal.
Date of Issue [DD-MM-YYYY]:
Value in Rs. Lakhs
12 Experience of having successfully completed similar works "(As per "Work Details" table of Etender notice) ." during last 7 years ending on previous day of last day of submission of tender should be either of the following. [Latest work experience (completion) certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost of Amount put to the tender OR (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost of Amount put to the tender OR (iii) ONE similar completed work each costing not less than the amount equal to 80% of the estimated cost of Amount put to the tender
Completed similar works during last 7 years
Work NoI Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to e-procurement portal.
Brief Description of Work:
Completed value of Work in Lakhs:
Date of Commencement of Work [DD/MM/YYYY]:
Date of Actual Completion of Work[DD/MM/YYYY]:
Work No II Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to e-procurement portal.
Brief Description of Work:
Completed value of Work in Lakhs:
Date of Commencement of Work [DD/MM/YYYY]:
Date of Actual Completion of Work[DD/MM/YYYY]:
Work No III Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to e-procurement portal.
Brief Description of Work:
Completed value of Work in Lakhs:
Date of Commencement of Work [DD/MM/YYYY]:
Date of Actual Completion of Work[DD/MM/YYYY]:
13 License for execution of Electrical works and other specialized works from the concerned authorities /organizations/bodies (applicable for Electrical works combined with Civil works) NOT APPLICABLE Related Document to be Uploaded to e-procurement portal. i.e License or udertaking
14 Details of person holding the power of Attorney (If different from contact person)
Name Related Document to be Uploaded to e-procurement portal.
Ph. No. with STD code
15 Acceptance by party for Scope of work as per BOQ and Tender terms & conditions Please write "Accepted/ Not-accepted"
The document being viewed / downloaded from the E-proc portal website and having read & understood all the contents of the tender document mentioned under terms and conditions (Page 1 to146) including price bid do hereby accept all the terms and conditions laid down. Please write "Accepted/ Not-accepted"
I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I/We aware that document sought only be uploaded for evaluation of offer. Please write "Accepted/ Not-accepted"
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
Etender_notice...pdf
TENDER_DOCUMENT • 0.47 MB
Tender_Document1590..pdf
TENDER_DOCUMENT • 1.63 MB
ECSDetailsForm.PDF
TENDER_DOCUMENT • 0.16 MB
PriceBid_turn.xlsm
TENDER_DOCUMENT • 0.07 MB
Prequalification_profileTU.xlsm
TENDER_DOCUMENT • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .