Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.5 LAccepted-AOC MAHALAKPUR NIZAMPUR AGHWANPUR ROAD AGHWANPUR MORADABAD UTTAR PRADESH 244001 | MORADABAD | UTTAR PRADESH | 244001 | L1 | Accepted-AOC AOC | |
| 2 | L2₹45.4 L+₹87,959.30 (1.98%)Rejected-Finance C O UTTAM BANIK HAIDERPARA OPPOSITE TO WEST BENGAL REPRESENTATIVE REST HOUSE P O HAIDERPARA SILIGURI 06 | JALPAIGURI | WEST BENGAL | 734006 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹46.3 L+₹1.8 L (4.13%)Rejected-Finance SHATYAM APPARTMENT 35 BALAI DAS CHATTERJEE ROAD HAKIMPARA SILIGURI 1 | JALPAIGURI | WEST BENGAL | 734001 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹46.6 L+₹2.1 L (4.75%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹46.8 L+₹2.4 L (5.30%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
13 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SEVOKE ROAD
GE Sevoke Road Post Salugara Dist Jalpaiguri PIN 734008
SPL REPAIR TO BLDG NO MA 166 AND MA 167 AND REVENUE WORK AND MINOR WORK AT BAGRAKOTE STN UNDER GE SEVOKE ROAD
2022_MES_544834_1
GE/SEV/26 of 2022-23
Open Tender
Civil Works
Item Rate
GE SEVOKE ROAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹84,000
Yes
28 Sept 2022
11 Aug 2022
15 Sept 2022
11 Aug 2022
13 Sept 2022
6 Sept 2022
12 Aug 2022 - 22 Aug 2022
Amount
Dismantling timber scantling 40 Sqcm and over in section in any position as in framed works complete all as specified and as directed.
Dismantling plain or corrugated steel sheeting any gauge or thickness as in roof covering complete all as specified and as directed.
S&F rolled mild steel Roof trusses (framed), trussed, purlins, crane, gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc( Fe 410-W Gde-E-250) quality A Including preparation of surface and one shop coat of zinc chromate primer at contractors workshop before fabrication complete all as specified and directed by Engineer-in-Charge..
S&F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe 410 W Gde-E 250) Quality A complete all as specified and as directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.
S&F mild steel screw bolt, 5 to 10mm dia machine made with hexagonal head at one end screwed the other or screwed both end, each screwed end to be fitted with washer and one hexagonal or square nut exceeding 05cm and not exceeding 10cm long complete all as specified and as directed.
S&F mild steel work (miscellaneous) as in wind ties for roof, flat iron fillets (for securing wire mesh etc) including drilling holes for securing bolts and fixed with bolts and nuts etc and similar work conforming to Fe-290.Gde-E-165, complete all as specified and as directed.
Taking down chowkats with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm each complete all as specified and as directed.
Taking down chowkats with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exceeding 4.00 Sqm each complete all as specified and as directed.
Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr deep in hard/dense type soil getting out and levelling of bottom suface to required level complete all as specified and directed.
S&F Steel ventilators with top hung shutter including hinges,steel peg stay, including one coat of red oxide primer complete all as specified.
S&F 3mm thick glass sheet ordinary quality & glazing with oil putty in square not exc 0.50 Sqm in each pane all as specified & directed.
S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane .
S&F solar control film 25 micro reflective type sticked to glass panes as per instuctions of manufactures
S&F pressed steel frames (Size-105X60mm) for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete all as specified .
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour prelam PVC sheet & edge will be painted to match with prelam sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing.
M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in block for hold fast, filling in frames, copings or similar work and finished the surface with existing including form work complete all as specified and as directed.
S&F factory made 2nd class hard wood rail and style 35mm thick plain framed, panelled shutter (two panel ) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F factory made 2nd class hard wood rail and style 35 mm thick Glazed and skeleton shutter open rebated and prepare to receive glass, gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauge etc size of members of shutters as specified in SSR part-I Section 8 and clause 8.24(a) all as specified and directed.
S&F Factory Made Solid Panel PVC single side PVC pre laminated coloured door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheets stile & rails having one side feathered edge and on other side 10mm 90 bent edge for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing.
S&F mild steel tower bolts stove enamelled black with bright bolt 200 mm long complete all as specified and as directed.
S&F 300 mm long mild steel sliding door bolts plate type stove enamelled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts nuts, four on bolts plate & two on staple plate complete all as specified and as directed.
S&F mild steel pressed handle oval type stove enamelled black 150 mm long complete all as specified and as directed.
S&F 300mm Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
S&F aluminium anodised barrel tower bolts of extruded section, 150mm long, complete all as specified and directed.
S&F 100mm Long Stainless Steel Butt Hinges, fixed to PVC door frame and shutter, complete all as specified and as directed
S&F 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
S&F galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.
Dismantling wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified
S&F 605X605mm anodised aluminium snap grid frame work for false ceiling including 2.5mm dia mild steel wire galvanized class 3, @ 60cm centre to entre and fixed to steel or wooden member including 4mm thick decorative type non asbestos fibre cement board fixed or laid/ inserted to aluminium frame work as in ceiling complete all as specified and directed. Note:- The size of aluminium main and croos tee shall be 40mm x25mm x2mm and size of angle shall be 25mm x 25mm x 2mm)
M&L Preparing of new non AC board surfaces and applying three coats of white wash on ceiling complete all as specified.
Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above GL) complete all as specified
M&L 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection & paving finished even & smooth without using extra cement complete all as specified and as directed.
S&F Mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to steel trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles Fe-290 Gde-E-165 complete all as specified and directed.
Demolition of brickwork built in cement mortar including disposal of debris, etc outside MD land, complete all as specified and directed.
M&L for Brickwork with subclass B brick straight and curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.
M&L for Brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all specified and directed.
Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified
M&L rendering 15mm thick in CM 1: 6 on fair faces of brick/concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.
M&L for rendering 20mm thick on fair faces of brick work or concrete surfaces in CM 1:4 including mixing WPC as per manufacturers instruction, finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured seperately.
Supply only Liquid water proofing compound complete all as specified and as directed.
M&L for Complete removal of existing treatment on wall surfaces and applying two coats of exterior emulsion paint over a coat of alkali resistant primer complete all as specified and as directed
M&L for preparation of new or untreated surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whiting on walls complete all as specified and as directed
M&L for Complete removal of existing treatment of wall surfaces and applying two coats of distemper oil emulsion over a coat of chalk whiting on walls complete all as specified and as directed .
M&L for preparation of new or untreated surfaces of walls and applying two coats of exterior emulsion paint over a coat of alkali resistant primer complete all as specified and as directed
M&L for 3mm thick wall care putty on wall complete all as specified and as directed.
M&L for preparation of new untreated wood and wood base material of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L for preparation of new primed steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.
M&L for preparing new steel and iron surfaces of any description n.exc 10 cm in width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
M&L RCC 1:2:4 , type B1, 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span and lintel band, roof band and other similar items including form work complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire annealed, not less than 0.9mm dia or securing with clips complete all as specified.
All as per item No.53 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as directed.
Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for rendering in CM (1:4), 10mm thick on fair faces of brick work or concrete surfaces for fixing of wall tiles complete all as specified and as directed.
M&L for screed bed or bedding layer of cement mortar 1:6, 20mm thick for laying floor finishes complete all as specified and as directed.
M&L for glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.
M&L for virified ceramic coloured tiles (light shade) 10mm thick (square/rectangular) polished area of each tile not exceeding 0.36sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.
M&L for virified ceramic coloured tiles (light shade) 10mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.
Taking down 15 mm bore GI pipe line including fittings and removal to store or cleaning for re-fixing complete all as specified and as directed.
Taking down 20 mm bore GI pipe line including fittings and removal to store or cleaning for re-fixing complete all as specified and as directed.
S&F 15 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all specified and directed.
S&F 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all specified and directed.
S&F in repair 15mm bore stop valves, fancy type cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repair 15mm bore Brass CP 3-in-1 wall mixer for mixing hot & cold water hand shower screwed down for iron pipe and fixed complete all as specified and as directed
S&F PVC connection 15mm dia with PTMT nuts of length 450mm. Complete all as specified and as directed.
S&F in repairs (EWC) Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) incl all fittings complete and fixing to flush pipe and outlet pipe complete all as specified and as directed
S&F PVC valveless, syphonic action type flushing cistern low level, 10 litre capacity with it's complete accessories, including connection to water pipe and PVC 32 mm dia flush pipe etc complete all as specified and as directed.
S&F Vitreous China wash basins, white, flat back, size 550x400mm excluding taps, waste but including brackets complete all as specified and directed.
S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.
S&F in repair 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and as directed.
Supply only 32 mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement & other end fixed complete all as specified and as directed.
S&F low density 32mm bore polythene waste pipe (LDPE) complete all as specified and as directed.
S&F in repairs two way bib cock with wall flange chromium plated with crutch or butterfly handle screwed down screwed for iron pipe 15 mm bore and fixed complete all as specified and as directed.
S&F in repairs 15mm bore CP Toilet Hand Pressed Nozzle (Heath faucet) with 1.25 meter long tube with CP wall bracket complete all as specified and as directed.
S&F Bib taps, cast copper alloy fancy type with crutch or butterfly handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and as directed.
S&F Brass chromium plated shower rose 125mm size complete all as specified and as directed
Dismantling of 100 mm bore cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed
S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed
S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
S & F 110 mm bore PVC (SWR) branch piece single (Single `T') equal or unequal with access door complete all as specified & directed.
S & F 75mm bore PVC (SWR) branch piece single (Single `T') equal or unequal with access door complete all as specified & directed.
Excavation in trenches n.exc 1.5 m wide and n.exc 1.5m in depth for foundation, shafts, wells, cesspits, manholes, pier holes and cables, pipes etc n.exc 10 sqm on plan and n exc 1.5 in depth and getting out in soft / loose soil complete all as specified and as directed.
All as per item No 89 above but depth exc 1.5m n exc 3.0m complete all as specified and as directed.
M&L for PCC 1:3:6 Concrete bed to drain pipes 100 mm bore including packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
S&F sinks with drainage board made of stainless steel 1.0 mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified.
S&F PVC (SWR) floor trap dia of outlet 75mm, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F PVC (SWR) gully trap dia of outlet 125/110mm, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F 15 mm bore Gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
S&F 20 mm bore Gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks 1000 Litre capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including provision of necessay fittings for connection the overflow, drain out, inlet and outlet pipes, complete all as specified and as directed.
S&F Ball brass valves of size 25 mm bore high pressure, with polythene float and fly nut, screwed for iron pipe etc, complete al as specified and directed.
Dismantling water tanks exc 500 & n exc 1000 ltrs capacity and removing from site complete all as specified and directed
M&L 20mm thick granite slabs of any type (table rubbed and polished) on cooking platforms set and jointed in net cement slurry and pointing in white cement (1:4) using marble dust with admixture of pigment to match shade of granite including necessary moulding at edges laid over and including 20mm thick cement mortor screed bed in cement mortor (1:4) complete all as specified and directed.
Excavation over areas not exceeding 1.5m deep and getting out in hard/dense soil complete all as specified and as directed
All as per item No 103 above but exceeding 1.5m deep and not exc 3.0m in depth getting out in hard/dense soil complete all as specified and directed.
M&L PCC1:3:6, type C-2 (using 40 mm graded crushed stone agg) as in foundation, filling and mass concrete complete all as specified.
M&L for Sand filling under floors including watering and consolidation as in sand cushioning for interlocking paver blocks complete all as specified and directed.
S&F Modular Septic Tank of Capacity 3000 Ltrs (12-15 Users) (plastic septic tank) vertical design tank type includng all accessoried and lowering into position and fixed to inlet and outlet pipes complete all as per manufacturer instructions and directed by Engineer-in-Charge. Make:- Supreme/ Sintex Plastics/ Aqua tech.
M&L for brick work with sub class 'B' bricks in one & half brick thick honey comb walling built in cm 1:4 complete all as specified and directed.
M&L for loose filling with broken brick bats of guage 80 to 150 mm in soakge pit/soakge well complete all as specified and as diected.
M&L for cement concrete 1:4:8 (type D-2) as in bed for drain pipes 150 mm bore including packing under and hauncing against the sides of pipes after they are laid and tested complete all as specified and directed.
S&F 150mm Internal Dia DWCPE pipes (SN-8) pipe ISI Marked laid in trenches and jointed complete all as specified and as directed.
M&L providing precast cement concrete 1:2:4 type B-1 (20mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain fair faces, including chamfers weatherings throating etc and Set in CM 1: 4 complete all as specified and as directed
M&L for cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete etc complete all as specified and as directed.
M&L 150mm thick cement concrete 1:4:8, type D2 (using 40mm graded crushed stone aggregated) as in sub base of floors complete all as specified.
S&F mild steel TMT bars 6mm to 8 mm dia cut to length,bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M&L for RCC 1:1:5:3 type B1 (using 20 mm graded crushed stone aggregate) nominal mix as in slabs supported on walls complete all as specified and directed. (Note : Re-inforcement shall be measured and paid separately)
M&L for formwork to soffits of floor slab or roof beam walls, lintel etc, flat rough finished complete all as specified and as directed.
Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping for flat surface) complete all as specified and directed.
S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified.
M&L for brick work with fly ash bricks straight or curved on plan exc. 6mtr mean radius, built in cement mortar 1:6, complete all as specified and directed.
M&L for Brick work with fly ash bricks as in half brick thick wall built in CM (1:4), complete all as specified and directed.
Surface excavation n exc 30cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed.
M&L hardcore of broken stone or boulders of gauge not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.
S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars,aluminium sections weighting 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing anodised aluninium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 no) hinges type B-21100mm long (2 no) suitable handle (1 no) complete all as specified.
Preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and as directed
Cutting existing 15 mm steel tubing for alternations or additions (each cut measured) complete all as specified and directed.
Cutting existing 20 mm steel tubing for alternations or additions (each cut measured) complete all as specified and directed.
Anodised aluminium grill (anodised tansparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screw @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement and direction of Engineer-in-Charge.
M&L 75mm thick PCC 1:4:8, type D2 (using 40mm graded crushed stone aggregated) as in sub base complete all as specified.
M&L PCC 1:2:4, type B0 (using 12.5mm graded crushed stone aggregate) as in copings, kerbs and the like incl weathering, slightly rounded or chamfered angles and throating, as directed incl necessary form work as reqd complete all as specified and as directed
M&L 60mm thick Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658- 2006 M-35 grade, laid as directed to any shape. Complete all as specified and as directed
Excavating in post holes (or similar holes) each n exc 0.50 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm, watering and removing surplus soil to a distance not exc 50 m and making good surfaces in soft/loose soil complete all as specified and as directed.
M&L 75mm thick cement concrete 1:2:4, type B1 (using 40mm graded crushed stone aggregated) as in sub bases flooring etc without using extracement lain in alternate bays complete all as specified.
M&L for moorum/red bajri filling in floor or paving laid in layers n exc 15 cm thcik spread levelled and blinded with earth and rammed including watering complete all as specified and as directed.
M&L 50mm thick PCC 1:2:4, type B1 (using 20mm graded crushed stone aggregated) as in sub base complete all as specified.
M&L for 40mm thick PCC (1:2:4) type B0(using 12.50mm graded crushed stone aggregate) as in DPC to horizontal or verticle surfaces including necessary formwork complete all as specified and directed.
M&L for mild steel round bars, 6 mm dia, as in reinforcement to half brick wall (two Nos in every fourth course of half brick wall) complete all as specified and as directed.
Supply and fixing CP soap dish fixed to wall with screws complete all as specified.
S&F 25 mm bore Gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
S & F 75 mm bore PVC (SWR) Vent cowl complete all as specified & directed
S & F 110 mm bore PVC (SWR) bends, diminshing pieces or tapers complete all as specified & directed
S&F Modular Septic Tank of Capacity 2000 Ltrs (9-10 Users) (plastic septic tank) vertical design tank type includng all accessoried and lowering into position and fixed to inlet and outlet pipes complete all as per manufacturer instructions and directed by Engineer-in-Charge. Make:- Supreme/ Sintex Plastics/ Aqua tech.
M&L for RCC M25 (Design mix) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
S&F CI manhole cover 600 mm dia medium grade all as specified and as directed.
M&L 150mm internal dia of salt glazed stone ware drain pipes grade A laid in trenches and jointed complete all as specified and as directed.
Taking down carefully copper/Aluminum point wiring light fan, socket or power complete (fittings such as switches ceiling roses pendants, regulators, sockets, sketch light fittings, tube light fittings etc. to be measured separately if found serviceable) and removing unserviceable materials from site of work and segregating serviceable materials for safe custody and making good to disturbed surfaces of walls, floors, etc. including disconnecting of ceiling fan/exhaust fan complete all as directed
Taking down old unserviceable Main switch DB's consisting of MCB's wooden/GI/MS sheet board, energy meter etc for kept in store and for later use complete all as specified and as directed.
M&L for concealed point wiring with two single core PVC insulated, unsheathed, multistranded copper conductor FRLS of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC rigid conduit (medium grade) with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.
All as per Item Sl No -148 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A switch-socket point on independent board complete.
All as per Item Sl No - 148 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 2.50 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 2.5 sqmm green in colour as earth lead for 15/16 A switch-socket point on independent board complete.
S&F Switch Socket combination, 2-in-1, 3 pin, 5/6 Amps flush type complete all as specified and as directed.
S&F Switch Socket combination, 5-in-1, 5/16 Amps flush type complete all as specified and as directed.
S&F Switch piano flush type, single pole, one way, 5/6Amp complete all as specified and as directed.
S&F ceiling rose ,surface bakelite 65mm x 50mm size with three terminals all specified and as directed.
Taking down existing u/s FTL light fitting and S&F in repair decorative box type LED fitting 20 watt 4 feet with aluminium extruded batten luminaire for 230 volt AC complete all as directed.
S&F new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium building security light with high power LED as light source lamp type 25 w with SPD , IP-66 protection with toughened glass including fixing pipe/saddle complete all as specified and as directed.
Supply and fixing DB with sheet metal enclouser 240 volts, 12 way with rated bus bar single pole & neutral double door for MCB, including cutting chases for DB of required size and making good disturbed surface area and putting blanking plate if required including taking down old unserviceable one complete all as specified and as directed.
S&F MCB, SP, 10 KA, 230 V. "C" curve, 06-32 A , ISI marked complete all as specified and directed
S&F MCB, DP, 10 KA, 230 V. "C" curve, 06-32 A , ISI marked complete all as specified and directed
S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep 120 watt complete all as specified and as directed.
S&F in repair PVC ventilation fan AC, single phase, 230/240 V, of size 250 mm sweep including making holes on wall & making good the disturbed surfaces with all connecting arrangements complete all as specified and as directed.
Taking down old serviceable/underviceable ceiling/exhuast fan, connecting wire etc and keeping at site for reuse at site after carrying out repairs works to building/rewiring complete all as specified and as directed by the Enge-in-Charge.
M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (in vertical position ) earth pit not less than 2.25 mtrs below normal ground level with the top edgeof the earth plate not less than 1.5 mtr (B.G.L.) & connected to galvanised iron wire 4 mm dia by means of bolts,nuts,checknuts & washer of galvanised iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made of 6 mm round bar, including necessary excavation & earth work in any type of soil , 20 mm dia med grade galavinised steel tube for watering with one end fixed with cast iron funnel & wire mesh, 15 mm bore light grade galvanised steel tubing up to 7.5 mtr length for drawing earth lead including common salt , charcoal in alternate layers etc. complete all as shown in EP no 3 of SSR Part 1 & testing on complection incl taking down old unsv earthing complete.
S&F decorative box type LED fitting 20 watt 4 feet with Al extruded batten luminaire for 230 volt AC all as directed by EIC.
S&F decorative box type LED fitting 09 watt 2 feet with Al extruded batten luminaire for 230 volt AC all as directed by EIC.
Supply and fixing DB with sheet metal enclouser 240 volts, 04 way with rated bus bar single pole & neutral double door for MCB, including cutting chases for DB of required size and making good disturbed surface area and putting blanking plate if required including taking down old unserviceable one complete all as specified and as directed.
S&F MCB, DP, 10 KA, 415 V. "C" curve, 06-32 A , ISI marked complete all as specified and directed
Supply and laying in trenches/wall LT UG XLPE insulated,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 16 sqmm 2 core including making necessary connections all as specified and directed.
Supply and laying in trenches/wall LT UG XLPE insulated,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 6 sqmm 2 core including making necessary connections all as specified and directed.
Supply & laying in trenches clear sand for cushioning under cable 8 cm below and 15 cm above complete in level all as specified and directed by Engr-in-Charge. Note:- Punned thickness shall be measured.
Supply and laying burnt clay sub class B brick as cable protection all as specified and directed.
Supply and fixing GI pipe 40mm bore medium grade for cable protection complete all as specified and as directed.
Cutting & screwing existing water pipe line mains 15/20 mm bore and connection with new pipe line laid including necessary fitting required at site complete all as specified and as directed.
Supply & laying in trenches GI pipe 20mm bore medium grade including fittings complete all as specified.
Supply & laying in trenches GI pipe 25mm bore medium grade including fittings complete all as specified.
Supply & fixing GI pipe 25mm light grade for cable protection complete all as specified and directed.
Supply & fixing gun metal gate valve iron wheel head screwed both ends for iron pipes of size 20mm all as specified.
M/s. STRUCTURES INDIA
M/S SUBRATA JOARDAR
M/S Bikash Saha
SRI SURAJIT SENGUPTA
SHRI JIBANDHAN PAUL
M S ALOK SAHA
TAPASH SAHA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .