Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.8 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹36.7 L+₹1.9 L (5.57%)Rejected-Finance FLAT NO 4 VIRGINIA CO OP HOUSING SOCIETY AIR PORT ROAD CHICALIM VASCO DA GAMA GOA 403 711 | SOUTH GOA | GOA | 403711 | L2 | Rejected-Finance Rejected being other than L1 | |
| 3 | L3₹36.8 L+₹2.0 L (5.84%)Rejected-Finance GARDEN AVENUE PLOT NO 242 243 244 RH 4 SECTOR 21 NERUL NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L3 | Rejected-Finance Rejected being other than L1 | |
| 4 | L4₹38.0 L+₹3.3 L (9.42%)Rejected-Finance | L4 | Rejected-Finance Rejected being other than L1 | |
| 5 | L5₹38.5 L+₹3.8 L (10.9%)Rejected-Finance | L5 | Rejected-Finance Rejected being other than L1 |
Tender Value
₹37 L
EMD Value
₹74,000
Closing Date
16 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) (CG) RATNAGIRI
Military Engineer Services Garrison Engineer I CG Ratnagiri MIDC Mirjole Ratnagiri 415 639
PROVISION OF CERTAIN MINOR WORKS AT ICGS AND ICGAS RATNAGIRI UNDER GE I CG RATNAGIRI
2023_MES_576034_1
8165/E8
Open Tender
Civil Works
Item Rate
120 days
RATNAGIRI
Please refer tender documents
8 documents required · 8 mandatory
₹500
GE (I) (CG) RATNAGIRI
₹74,000
Yes
24 Feb 2023
19 Jan 2023
17 Feb 2023
19 Jan 2023
16 Feb 2023
2 Feb 2023
Amount
M & L for taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.
M & L for surface excavation n.exc (not exceeding) 30 cm deep and averaging 30 cm deep and getting out in hard/dense soil complete all as specified and as directed.
M & L for surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and as directed.
M & L for excavating in post holes in hard/dense soil (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.
Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, toe walls, kerb stones etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out hard/dense soil complete all as specified and as directed.
M & L for removing excavated material exc. 250 m but n exc. 500 m and depositing where directed where directed at a level not exceeding 1.50m above the starting point complete all as specified and as directed.
M & L for removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and as directed.
M & L for forming embankments from the excavated soil including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc n exc. 1.5m high from base complete all as specified and as directed.
M & L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and as directed.
M & L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate Cement concrete as in foundations, filling and mass-concrete all as specified and as directed.
M & L for cement concrete Type B1 1:2:4 using 20mm graded aggregates as in kerbs, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
M & L for Rendring 15mm thickin CM 1:4 on fair faces of laterite walls or concrete surfaces finished fair and even complete all as specified and as directed.
M & L for machine cut laterite stone masonry wall exc 10cm in width of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and as directed.
M/L for rendering 10 mm thick with cement mortar (1:4) for laying in dado/ wall cladding etc compelete all as specified.
M & L for rendering 15 mm thick with cement mortar (1:4) for laying in dado/ wall cladding etc compelete all as specified.
M & L for 18-20mm thick Granite (of any type) tiles machine cut as in wall cladding laid over cement screed and jointed with grey cement slurry including mixing of Aralite adhesive or equivalent for proper bonding of stone slabs on walls, pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, colour and shades of granite as approved by Eng-in-charge compelete all as specified.
M & L for rounding to edges of granite and marble stone slabs one edge, such as in copings, steps, cooking platform, and other similar situations complete all as specified and as directed.
M&L for broken stone or boulders Hardcore of gauge n exc.63 mm, deposited, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
M&L for 100mm thick PCC 1:2:4 type B1 using 20mm aggregate as in wearing course complete all as specified and as directed.
M&L for 100mm thick PCC 1:4:8 type D2 using 40mm aggregate as in base complete all as specified and as directed..
M&L for pressed precast concrete interlocking paver block any shape and size conforming to IS 155658 - 2006 of 80 mm thickness M-40 grade with grey cement and pigment and including required sand cushing, sealing the edges complete all as specified and directed.
M & L for Chequered cement concrete tiles 30 cm X 30 cmx 25 mm thick, with mixture of white, grey cement in equal proportions set, jointed and pointed in neat cemnt slurry in floors over 20 mm thick screed bed in CM (1:6) with texture, colour and design patterns as approved by Engineer in charge. complete all as specified and as directed
M&L Non - skid Ceramic tiles 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in walls as in dado or cladding etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the existing colour, texture, design/pattern and as approved by Eng-in-Charge including making a joint free finishing, groove joint at corners & edges of walls and forming good finishes to the existing surfaces complete all as specified and as directed.
M& L for forming construction joints of 30mm deepx 10mm wide filled with sealing compound grade B complete all as specified and as directed.
M & L for Forming 12mm thick Expansion joints, filled with pre-formed bituminous filler, top 30mm primed and sealed with sealing compound, Grade-A on concrete slab having 100 mm thickness complete all as specified and as directed.
M&L for Sand filling under floors, gardens and play area including watering and forming a uniform thickness of loose sand layer complete all as specified and as directed.
S & F of Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per directions of Engineer-in-Charge. Note: It should be made at site and fixed as per directions of Engr-in-Charge.
S & F of Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per directions of Engineer-in-charge. Note: It should be made at site and fixed as per directions of Engr-in-Charge.
S&F of Aluminium handles, cast type, anodised of size 150 mm long etc complete all as specified and as directed.
S&F of Aluminium anodised,barrel tower bolts of extruded section of size 300 mm long etc complete all as specified and as directed.
S&F Butt hinges of 100 mm, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and as directed.
S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type)of size 300mm and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed.
S & F mortice locks vertical type size 100mm ( 02 lever made of brass) complete all as specified and as directed.
S & F Door closer hydralically regulated made of Aluminium body (extruded section) designation No. 2, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and as directed.
S & F sliding wheel track having length 1 m and above for hanging, opening & closing of the aluminum doors suitable for weight 30kg and above including guiding track, wheels complete set and necessary fittings for ease of movement of doors etc. complete all as specified and as directed.
M&L for MS Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges, large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
M & L for Mild steel Fe 410 Gd E250 quality A in flat, round or square bars, in available lengths for wind ties securing to frames complete all as specified and as directed.
M&L for MS plates Fe 410 Gd E250 quality A in roof trusses (framed)trussed, etc connecting with bolts/welding as baseplates/connecting plates etc complete all as specified and as directed
M&L for MS plain, black sheet of 1mm thickness as in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.
S&Fof Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed.
S&F Pre painted galuvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of an colur having tensle strength of 550Mpa as in roof covering/cladding to wall with self tapping screws complete all as specified and as directed.
S&F Pre painted galuvalume aluminium zinc coating GI based corrugated sheet 0.5mm thick of an colur having tensile strength of 550Mpa as in roof covering/cladding to wall with self tapping screws complete all as specified and as directed.
M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of redoxide zinc crome primer on Surfaces of any description,over 10cm in width or girth, not otherwise described complete all as specified and as directed.
M & L for 09mm thick Plywood, grade BWR type BB having minimum 5 Nos of ply, fixed with screws to timber frame work etc. complete all as specified and as directed. Note: It should be made at site and fixed as per directions of Engr-in-Charge.
M & L for 12mm thick Plywood, grade BWR type BB having minimum 7 Nos of ply fixed with screws to timber frame work etc. complete all as specified and as directed. Note: It should be made at site and fixed as per directions of Engr-in-Charge.
M & L for 18mm thick Plywood, grade BWR type BB having minimum 7 Nos of ply, fixed with screws to timber frame work etc. complete all as specified and as directed. Note: It should be made at site and fixed as per directions of Engr-in-Charge.
M&L for 0.9 mm thick Decorative laminated sheet type 1 of surface finish coloured and pattern as approved and fixed over plywood with approved adhesive complete all as specified and as directed.
S & F of sheet glass 5.5mm thick and glazing with provided with aluminium cleats for securing in squares exc 0.5 sq. m in each pane complete all as specified and as directed.
S & F 9mm thick Prelaminated particleboard, interior grade, prelaminated both sides with decorative choice lamination fixed with screws to timber/Aluminium frame work as in partition etc. complete all as specified and as directed.
M&L for 15mm thick Toughned glass as in hinged working cabinets for office, doors, partitions, automatic doors and similar work including cutting to shape, drilling holes and securing glass with SS clamps and screws to the wooden frames/plywoods including making smooth finishes to the edges exposed etc as required complete all as specified and as directed.
M&L Plain fillets of 2nd class hard wood area not exc 3 Sq cm for cubboard, wardrobe & door, including clean, sawn, res-ecured with nails or- brads complete all as specified and as directed.
M&L Plain fillets of 2nd class hard wood area exc 3 sq cm but not exc 6 Sq cm for cubboard, wardrobe & door, including clean, sawn, res-ecured with nails or- brads complete all as specified and as directed.
M & L varnishing of plain fillets, not exc 10 cm in width or girth when unconnected with other work or painted in different tint with one coat of wood file with two coats of synthetic varnish complete all as specified and as directed.
M &L for magnets os size 50x30x13mm for closing of wooden shutter as in wooden cupboard and modern wardrobes complete all as specified and as directed.
M &L for brass type D hinges of 75mm as in wooden cupboards and modern wardrobes complete all as specified and as directed.
S & F SS auto closing concealed hinges for snap on attachment 9.5mm and above crank for half overlay door/shutters suitable to modular cupboards with 95 degree opening angles, 14-32mm zinc coated complete all as specified and as directed.
S&F Brass Locks cupboard grade I, size 50 mm brass 02 levers complete all as specified and as directed.
M & L for Brass handles, cast type, polished bright 150 mm long complete all as specified and as directed.
S & F telescopic hinges 450mm for computer keyboard shelves and drawers for opening/closing as in wooden study table/workspace including fixing to frames with screws etc. complete all as specified and as directed.
S & F Modular lock grade-I 50mm 02 lever as in modular wooden cupboard and modern wardrobes complete all as specified and as directed.
M & L for SS round pipes of grade 304 of dia upto 150mm for road furnitures including cutting to size, erecting in position, welding and brazing complete all as specified and as directed
S & F of Aluminium composite panel (ACP) AL 33D sheet 3mm panel with 0.3mm aluminium coil thickness aluminium alloy AA3105 for exterior applications sign board fixed on MS frame work by riveting of bolts and nuts at 300mm c/c all along the periphery complete all as specified and as directed.
M & L for printing with 3M radium reflective film and UV eco print by pressure sensitive adhesive backing on aluminium composite panel as in sign board for printing approved images complete all as specified and as directed.
S & F of SS 304 glossy finish door numbering plates of size 110mmx110mm with fonts made with PVC water proofblack stickers including fixing with studs/catch nuts at four corners for aesthetic look etc. complete all as specified and as directed
M & L for SS-304 fonts for the nonmenclature "INDIAN COAST GUARD AIR STATION RATNAGIRI" having min height of 600mm incluidng light strips on the periphery of fonts, necessary scafoldinig for placing the plates, fixing with SS screws and all fitting and fixtures complete all as specified and as directed.
Supply of Stainless steel 304 SS of superior finish visitors bench for 03 seater modern and contemporary, perforated stainless steel sheets of min thickness 1.4mm, central beam made of solid beam to sustain weight up to 500 Kg with overall dimension of 170x75x75mm and above having min net weight of 20kg and above which is suitable for direct exposure of sunlight when placed in outdoor areas complete all as specified and as directed.
M & L for SS-304 silver/brass glossy finish engraving fonts for the logo of "INDIAN COAST GUARD RATNAGIRI" having min height of 900mm and min width 750mm with 25mm projection (depth) from claddings, embedded on 5mm thick milky white PU acrylic sheet on the rear side for illumination of LEDs, each letters with min 15-20 Nos of LEDs encased to get complete water resistance, LEDs of make samsung, philips or its equivalent having min warranty of 05 years from the date of installation incluidng fixing with SS screws to the walls/granite claddings and all electrical fitting and fixtures complete all as specified and as directed.
M & L for Fabrication and installation of pylon boards of size 2.50x0.75m with main frames made of GI tubular of size 30x30x3mm including cross stiffners and supporting post made of GI tubular of size 50x50x3mm with appropriate solid bearing plates for foundation including powder coating of min 50micron to the GI supports for superior finish, digging, concreting to foundation and leveling up the surfaces. Pylon boards made up of ACP sheet of 4mm thickness, approved colour and matt finished, bent to shape at its edges for fixing to the GI post. The engraving the logo of Indian coast guard (English and Hindi) and nonmenclatures of fonts of sizes 200mm and above for "INDIAN COAST GUARD " and "भारतीय तटरक्षक दल" (English and Hindi) over ACP sheet engraved through laser for exact cutting and providing with 3mm milky white acrylic sheet to iluminate with LEDs each letters with min 15-20 Nos of LEDs encased to get complete water resistance, LEDs of make samsung, philips or its equivalent having min warranty of 05 years from the date of installation incluidng all electrical fitting and fixtures complete all as specified and as directed.
M & L for SS-304 silver/brass glossy finish engraving fonts for the nonmenclature "INDIAN COAST GUARD OFFICERS RESIDENTIAL AREA" having min font height of 200mm and min 25mm projection (depth) from claddings, embedded on 5mm thick milky white PU acrylic sheet on the rear side for illumination of LEDs, each letters with min 15-20 Nos of LEDs encased to get complete water resistance, LEDs of make samsung, philips or its equivalent having min warranty of 05 years from the date of installation incluidng fixing with SS screws to the walls/granite claddings and all electrical fitting and fixtures complete all as specified and as directed.
S & F of Anodised aluminium snap grid frame work for false ceiling Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs or walls by means of ceilling cleats made out of G.I flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.
S & F of Gypsum Board 12mm thick of sizes 600x600mm (laminated) in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed.
S& F XLPE insulated armoured and pvc sheated heavy duty electric cable 4 core 10 sqmm with aluminium conductor 1100 volt grade laid in tranches passing through pipes /ducts including testing complete of following cross sectional area and size note- rate is inclusive of cable gland & cable lugs complete all as specified and as directed.
Supply & Fix car washing Pump set Heavy Duty Tripple piston , with 3 HP single phase motor including 20 mter PVC armoured Hose pipe , Nozzel , DOL Starter as per manufacturer recommendation complete as directed
S & F for Sheet metal Enclosure suitable for TPN MCB up to 32 Amps complete all as specified and as directed.
Supply and fixing MCB TPN , 10 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.
Supplying and laying 25 mm outer dia of CPVC SDR Schedule 11 pipes & CPVC Schedule SDR 11 Brass treaded fittings in trenches complete all as specified.
Supply and fix PPR gate valves, with iron wheel head, screwed both ends for iron pipe and fixe, 25 mm dia complete all as specified and as directed.
Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed.
PVC Water Tank tripple layer 2000 Lit Capacity complete all as specified and as directed.
M & l for cutting existing steel tubing up to 50 mm dia pipe for alterations or additions (Each cut measured) complete all as specified and as directed.
Point wiring with PVC insulated unsheathed FRLS stranded copper conductor cable of size 1.5 Sq mm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm stranded for earth continuity wire, to be drawn in and including, PVC medium grade conduit not less then 25 mm dia.concealed in walls/roof/floors with MS sheet metal sunken modular switch/Terminal box 1.2 mm thick and Modular plate and brass screws with cup washers all as directed and specified Note : (1) Rate is inclusive of Cutting/chases of wall/floor/ceiling (a)One light point / fan point controlled by one, one way switch complete all as specified and as directed.
S &F modular Switch piano flush type single pole one way 5 amps complete all as specified and as directed.
S&F modular white cover plate with frame 6 module Make Legrand, Schneider, hager or equivalent makes complete all as specified and as directed.
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complet with all assoceries intenallt prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size complete all as specified and as directed.
M/S jvsr constructions
M/s S.D Construction Co
M/S K.D.MATE
GULMOHAR CONSTRUCTION
M/S SUGAM CONSTRUCTION
A S ENTERPRISES
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .