Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹21.1 LAccepted-AOC 9 NAROTTAM KUNJ MADHU NAGAR AGRA CANTT 282001 | AGRA | UTTAR PRADESH | 282001 | 1 | Accepted-AOC Being lowest | |
| 2 | 2₹23.3 L+₹2.2 L (10.4%)Rejected-Finance | 2 | Rejected-Finance Not being lowest | |
| 3 | Rejected-Technical 91 DEFENCE ESTATE PHASE II NEAR AMBEDKAR PARK DEORI ROAD AGRA UP | AGRA | UTTAR PRADESH | 282001 | - | Rejected-Technical Being not enlisted in appropriate category ie. b(iii) |
Tender Value
₹19.2 L
EMD Value
₹38,380
Closing Date
20 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE Agra
112, Taj Road, Agra Cantt
SPL REPAIR TO HT 33 KV METERING CUBICLE BY ADDN / ALTN AT MES 33 KV GWALIOR RD AGRA UNDER GE (EAST) AGRA
2023_MES_602736_1
84273/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Agra
MES contractors enlisted in Class E category b(iii) for unenlisted contractors meeting the enlistment criteria corresponding to value class and category of work
8 documents required · 8 mandatory
₹500
GE East Agra
₹38,380
Yes
5 Sept 2023
12 Jun 2023
28 Jul 2023
12 Jun 2023
20 Jul 2023
26 Jun 2023
12 Jun 2023 - 19 Jun 2023
Amount
Supply, installation, testing and commissioning of ABT meter & metering infrastructure suitable for metering on 01 No of 33 KV feeder, 50 Hz and suitable space for installation of CT/PT of specification mentioned below (Cost of CT/PT is not included in this) System as per relevent specification of the state DICOM/TRANCO/SLDC, as directed approval Meter for 33.KV CT Ratio -/1A Accuracy:0.25, complete with Software, MRI instrument and all accessories required for and installation of meter and to start of Open Access complete. The meter should be relevant IS marked and open access standards complete all as specified and directed
S& F Metering Panel Board 33 KV for installation of ABT meters, 03 Nos CTs and 03 Nos PTs of suitable size made out of 3.15 mm thick powder coated CRCA sheet, IP-54, Indoor type and dust proof suitable to accommodate ABT meter and accessaries as per UPPCL guide line including and mounted on floor/grouted in floor of PCC (1:2:4) type B 1 (using 20 mm graded stone aggregate) and making good existing surface complete all as specified and directed.
Supply, fix, installation & testing of 33 KV indoor type 03 sets of CTs of 0/0.25 & PTs of 0.25 accuracy class having burden of 5 & 10 VA respect, in confirmation to DISCOM/UPPTCL / SLDC specification with cubical (CT-PT ratio depends on the existing meter available at consumer site) of relevant IS standard and as per open access requirement including electric connections for meters, CTs / PT using control cable of size 4 sqmm, 4 core etc complete all as specified and directed.
Open access approvals, installation and commissioning of the meterin infrastructures including inspection, testing and commissioning of ABT meter (intem 1 above) and liasioning with TRANSCO / DISCOM / SLDC / NABL for the following :- (a) Project management and coordination with for timely execution and installation of metering infrastructure. (b) Liaison for getting approval of open access for initiation of the subsequent activities. (c) Labour changes towards cabling Electrical & general hardware, in stallation of CT - PT arrangement for mounting of meter cubicle, welding etc at metering point. (d) Final NOC for power commencement & scheduling for making final delivery of power as perapplication duration & load requirement of open assess transaction. (e) Testing fee of NABL for performing metering testing in the presence of UPPCL. (f) Electrical inspection of metering infrastructure by an authorized indepdendent Electrical inspector. Electrical safety NOC at consumer premises. (g) Submission of compliance reports & arranging final. (h) NOC / Concurrence for short term open access (STOA) for trading in open access for implementing purchase of power through open access. (j) Monthly liasoning & consultancy for arranging NOC / Open Access approval from SLDC & Discom upto one year. (k) Billing settlement on monthly basis with distribution license upto one year.
NOTE;- The complete job includes arrange the standing clearance / no objection certificate (NOC) / concurrance from the nodel agency (SLDC) / UPPCL / DISCOM for short term open access (STOA for a period of one year) to the MES facility 33 KV incoming power (incoming from UPPCL) and implementing open access by accomplishing procurement of power for MES through Power Exhange / Bilateral mechanism. All charges involved in the above mentioned work till completion will be payable by the Bidder. No extra payment will be made by the Deptt. All other charges to be paid by the contractor except the following (paid by the deptt) :- (a) Safety NOC of SS and payment of sttutory fee for drawing scrutiny and inspection. (b) Drawing Approval & payment of scrutiny fee (Bay, TL & SS) (c) Payment of inspection fee and safety NOC (Bay, TL & SS) (d) Application fees, processing charges, evacuation feasibility study charges, refundable deposits etc to Nodal agency / DISCOM & TRANSCO. (e) Registration charges payment for generator and off taker to UPSLDC.
Excavation in trenches, in any type of soil n.exc 1.5 M wide and exceeding 1.5 M in depth and getting out including forming bottom surfaces to required level or slope including removing of cable cover bricks for relaying complete all as specified and directed.
Returning, filling in, excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.
Removing of surplus soil to a distance not exceeding 50 M and depositing where directed at a level not exceeding 1.5M above the starting point complete all as specified and directed.
S & F GI tubing 100 mm dia " light grade" for cable protection including suitable size MS clamp complete all as required and directed.
S & F GI tubing 40 mm dia " light grade" for cable protection including suitable size MS clamp complete all as required and directed.
Supply, laying, jointing testing and commissioning of HT UG cable in loops/ducts/trenches/ under floors/poles/in pipe, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) aluminium conductor, 33000 volts grade, earthen, cross sectional area 240 sqmm, 3 core complete confirming to IS 7098 (part-II) 1985 complete all as specified and directed.
Supply , jointing and testing cable jointing kit of 33 KV (Earthed) grade cable for indoor termination, heat shrinkable type complete with all jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of 240 sqmm size complete all as specified and directed.
All as per item No.11 above but for cable joint out door type of size 240 sq mm.
M&L for earthing complete with galvanized earth plate electrode of size 600 x 600 x6mm thick burned directly in ground ( earth pit not less than 2.5 M below normal ground level ) with top edge of the plate not less than 1.75 M below normal ground level connected to and including galvanized steel Strip of size 32 x 6 mm as earth lead Earth plate to bldg test point including 40mm GI light grade pipe for earth protection from earth point to earth plate surrounded by 150mm thick alternate layers of charcoal dust mix all with 35% common salt, 20mm bore medium grade GI Pipe for watering PCC pit type 1:3:6 type C-1 (using 20mm graded stone aggregate), with 50mm thick cover in PCC 1:2:4 TYPE B-1 (using 20mm graded stone aggregate) reinforced with 8mm dia CTD bars @8mm e/c both way. GI check nut, funnel with wire mesh necessary excavation and earth work in any type of soil all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 Note :Result of earhiing shall not be more than 1 ohms, all earthing work will be rework if result not achieved
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for 20-25 mm thick machine cut kota stone slab flooring over 20mm thick cement screed bed in CM 1:6 , laid and jointed with grey cement slurry mixed with pigment to match the shade of stone slab including cutting, grinding, rubbing and mirror polishing complete all as specified and directed.
All as per Item No.15 above but in vertical surface like skirting etc over 10mm thick rendring in CM 1:4 .
Demolition of brick work built in cement or cement lime mortar incl all quoins, arches, pillars etc, complete all as specified & directed
M&L for brick work with sub class ‘B’ brick, straight curved on plan exc 6m mean radius built in CM (1:6) with using old size bricks complete all as specified and directed.
M&L Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding with CM 1:4 into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed.
M&L for demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.
M&L for providing pre-cast RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in Lintle bend including necessary form work set in CM 1:4 , complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately)
S&F MS TMT bars 10 mm dia and above cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
S&F mild steel bars 5 mm dia and over up to 10 mm dia in stirrups space and binders. (TMT) cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel complete all as specified and directed.
Material and labour plain cement concrete 1:2:4 type B-0, 1:2:4 (using 12.50mm graded stone aggregate) 25mm thick as in sub floor, sub base, padding etc including chicken wire mesh sandwich with two layer complete all as specified and directed.
M&L for 15mm thick plastering in CM 1:6 on brick surfaces of walls & finishing the surface even & smooth complete all as specified and directed.
M&L for 15mm thick plastering in CM 1:4 on brick surfaces of walls & finishing the surface even & smooth complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed
S&F MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, gusset plates/duct cover 10 mm thick, riveting, etc., n exc 10 kg each brackets, conforming to Fe 290 Gd 165 complete all as specified and directed
M&L MS Framed work as in doors with chowkhats or with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (incl of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed
M&L for providing, PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) for embedding hold fasts including necessary form work etc complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surface over 10 cm width or girth including preparation of new or previously untreated steel surfaces complete all as specified and directed.
virendera singh
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .