Renovation of 10 nos park f Sector-9A and Chath Pooja Ghat of Ward No. 14 Zone I MCG

Amount

HSR Good Earth for filling un-even land [HSR 3.1.2 plus 17.8.2 plus 17.8.3] (228.00) SDS.

-Pull Chair and Push Chair ( Two in one ) 1. Dimensions (LxWxH) 1800 x 700 x 1800mm. 2. Fabricated with main post of NB 100mm (G.I) `C` Class pipe of approved make. 3. Seat main frame of NB 50 mm (G.I.) `C` Class pipe, Pipe connecting main post with handle frame of NB 65mm (G.I.) `C` Class pipe. 4. Handle frame of pipe NB 32mm and NB 25mm (G.I.) `C` Class. (NB stands for nominal bore i.e. internal diameter of pipe in millimeters. 5. All pipes are powder coated with 80-120 micron thick akzo Nobel or equivalent paints. 6. All joint of pipe are robotic welded with joints scalloped as necessary and dressed of removing sharp edges and burrs. 7. Zinc primer paints is applied at all the welding points prior to finishing. 8. Handle bars are provided with high end quality rubber grips. 9. Base plate cover made of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness UV resistant and colored. 10. Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00mm thickness, coloured, UV resistant and environment friendly. 11. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the Each NSADRate 5.00 32,400.00 162,000.00 Work Name Work Code Sub Division Estimate Amount Lumpsum Amount Total Amount Renovation and Beautification of 10 Nos Parks of Sector-9A and Chath Pooja Ghat of Ward no. 14 Zone 1 MCG GUR01220210412230 155 Gurgaon 17414401.22 0.00 17414401.22 equipment manufactured. 12. The equipment are fitted with inbuilt limiters to prevent unwanted movements. 13. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. 14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. 15. High tensile steel with galvanized nut bolts are used for assembly. 16. Equipment made to GS mark, EN16630, DIN 79000 and ISO 14001 international standard for outdoor fitness equipment. 17. Self-explanatory stainless steel label fixed on equipment for ease of use. The rates are inclusive of all taxes like GST, transportation

Air Walker: Providing designing and fixing of Air Walker of size 1100 x 550 x 1480mm fabricated with main post of 114mm dia and 2.5mm thick and rest of pipes or 40mm dia 2.5 mm thick made up of hot rolled tubular steel and hot dipped gaivahized and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints or pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps base plate cover shall be made or virgin LLDPE plastic by rotational moulding with minimum 3mm thickness UV resistant and colour as approved by Engineer in charge. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments maufactured by reputed company duly oil sealed and self lubricated to be approved by Engineer in charge. The equipment shall be fitted with in built limiters. The equipments shall be fixed on ground with concrete or minimum strength M-25 and J shaped welded bolts and when concrete is set fixing the equipment on to it and cover nuts and bolts with base plate cover all complete as per directions and approval of Engineer in charge regarding material shape of equipment colour all complete as per directions and approval of Engineer in charge regarding material shape of equipment colour (of metal seat and pedal) and fixing of equipments etc (the cement concrete and excavation work shall be paid for separately).

Dips/ Chin Up/ Push Ups ( 3 in One Machine ) :- 1. Dimensions (LxWxH) 1400 x 1200 x 2100mm. 2. Fabricated with main post of NB 50mm (G.I) `C` Class pipe of approved make. 3. Main frame of NB 50mm (G.I) `C` Class Pipe. 4. Leg support of NB 32mm (G.I) `C` Class Pipe and other support of NB 25mm (G.I) `C` Class Pipe. (NB stands for nominal bore i.e. internal diameter of pipe in millimeters). 5. All pipes are powder coated using akzo Nobel or equivalent paints of 80-120 micron thick . 6. All joint of pipe are robotic welded with joints scalloped as necessary and dressed of removing sharp edges and burrs. 7. Zinc primer paints is applied at all the welding points prior to finishing. 8. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. 9. Once the concrete is set, the equipment is fixed on to it . 10. High tensile steel with galvanized nut bolts are used for assembly. 11. Equipment made to GS mark, EN16630, DIN 79000 and ISO 14001 international standard for outdoor fitness equipment. 12. Self-explanatory stainless stell lable fixed on equipment for ease of use. The rates are inclusive of all taxes like GST, Transportation, Installation at site complete in all respect to full satisfaction of engineer in charge complete in all respect.

Horse Rider and Air Swing1. Dimensions (LxWxH) 1500 x 900 x 1100mm. 2. Fabricated with main post of NB 100mm (G.I) `C` Class pipe of approved make. 3. Horse Rider main frame of NB 65mm (G.I) `C` Class pipe Handle support frame of NB 50mm and other pipes of NB 32mm and NB 25mm (G.I) `C` Class pipe. 4. Air Swing leg support frame of NB 50mm (G.I) `C` Class pipe, Handle support frame of NB 32mm and NB 25mm (G.I) `C` Class pipe (NB stands for nominal bore i.e. internal diameter of pipe in millimeters). 5. All pipes are powder coated with 80-120 micron thick akzo Nobel or equivalent paints. 6. All joint of pipe are robotic welded with joints scalloped as necessary and dressed of removing sharp edges and burrs. 7. Zinc primer paints is applied at all the welding points prior to finishing. 8. Base plate cover made of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness UV resistant and colored. 9. Foothold for Horse Rider made of NB 32mm (G.I) `C` Class Pipe 10. Foothold for air swing made of MS Sheet Metal with rounded edge to percent impact and injury. Each NSADRate 5.00 32,400.00 162,000.00 11. Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00mm thickness, coloured, UV resistant and environment friendly. 11. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 12. The equipment shall be fitted with inbuilt limiters to prevent unwanted movements. 13. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts made of 18mm thickness. 14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. 15. High tensile steel with galvanized nut bolts are used for assembly. 16. Equipment made to GS mark, EN16630, DIN 79000 and ISO 14001 international standard for outdoor fitness equipment. 17. Self-explanatory stainless steel label fixed on equipment for ease of use. The rates are including of all taxes like GST. transportation and installation at site of work to full satisfaction of Engineer in charge.

Providing and fixing of designer Victorian steel sitting Bench covering area approx. 5’L frame to frame side frame in of heavy duty cast iron which is circular shape at front sitting corner. Seat and Back rest 59” long total 12 Nos, is of MS rectangular pipe 65*25mm*14 Gauge complete with Epoxy Primer (INTERSEAL 670 HS) and PU finish (INTERTHANE 990) paints and INTERTHANE 1027 clear coat make Akzo Nobel India Ltd. (Protective coating Division) approx. weight of each Bench is 83 KG. The bench should have designer shade of different picture or design as approved by engineer in charge The rates are inclusive of all taxes like GST, transportation and Installation complete in all respect to full satisfaction of engineer-in-charge.

NS Item = Supply of RH Pipe 1` dia.

Elliptica exerciser: Providing designing and fixing elliptical exercise of size 1200 x 540 x 1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior

Providing and fixing of Gate valve for hydrant connection

Bridge Ladder: 10’L x 2’W x 6’H. Horizontal ladder is of m.s pipe 2” and ¾” and vertical ladder is of same material of 12 gauge ISI mark with suitable PU Primer and PU Paints. Complete item with GST, Transportation, Installation with C.C and labor at site.

Double Cross Walker/ Cross trainer double:- Providing, and fixing Double Cross Walker of size 1600 X600 X 1600 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer -in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength N425 and J shaped welded bolts and once the concrete is set

merry go round 4 seater 5dia main frame is m s sq pipe round pipe centrel pipe which further pipe supports with pipe ball bearing assembly chair made of molded frp plastic pu primer and pu paints

Providing and fixing 3/4`dia Hydrant connection

Providing and fixing Chain Swing - 2 seater ( Swing). Specifications Attached.

Rowing machine: Providing designing and fixing rowing machine of size 1280x800x1150 mm fabricated with main past of 114 mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber Foothold shall be made up of nylon alloy with rounded edges to prevent any impact or injury and base cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm colourful and UV resistant and environmental friendly. Bearing used shall be maintenance free duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipments to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover with the base plate A.I complete as per direction and approval of engineer in charge regarding material shape of equipment colour on metal seat and base pedal and fixing of equipments etc (the cement concrete and excavation work shall be paid for separately).

sea saw 4 seater 8 lx5 5 Hw X 15 high frame of ms pipe 2 x 12 guage sittibg planks is of pipes and handle seats 4 nos. molded frp material

Seated chest press: Providing designing and fixing of seated chest press in a pair of size 1800 x 700 x2000 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick.

Twister:- Providing, and fixing Twister of size 1700 X 1300 X 1300 mmb make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary

Wave Slide: 9’.5 L x 5’H. Wave slide is of molded Fiberglass Reinforced Plastic (FRP) of 6mm thick and climbing ladder is of m.s pipe 1” x 12 gauge and m.s rectangular pipe

NEW HSR 2021(21.24):- Brick ballast, well or over burnt broken and screened through a 32mm x 32mm square mesh screen laid consolidated and rammed to a finished thickness of 75mm as above

Bidder Name

Amount

M/s Sami Greenmax Landscape Pvt. Ltd.(GSTN-06AAPCS4484A1Z9)

M/s Lakshay and Co.(GSTN-06CDBPS7952K1Z0)

Big Brother Traders(GSTN-NA)

Big Brother Traders

M/s Lakshay and Co.

M/s Lakshay and Co.

Big Brother Traders