GE 874/EWS-17/2023-24

Amount

EM Portion

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

M&L for point wiring for One light /one fan/one bell point controlled by one switch with PVC insulated unsheathed single core multistranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLS, drawn through PVC casing caping including accessories and provinsing of PVC boxes for mounting switches, switch socket, fan regulator, provn of modular terressa plate Irene stripes, No of modules as required on site or as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) earth wire and connected to earth dolly. Make of wire :-Havells/ Finolex/L&T. Make of casing caping- Poly plast/ pressfit/ Presto plast.

All as per item above but for One socket outlet 5 pins 5 amps controlled by one switch on same board .

All as per item above but for One socket outlet 5 pins 5 amps controlled by one switch on independent board.

All as per item above but wiring with 2.5 sqmm copper wire ( FRLS) and 1.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.

M & L for Modular point wiring for one light/one fan controlled by one switch with 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with and including PVC casing capping ISI maked heavy duty for one light fan/bell point controlled by one switch including Modular cover plate and modular metallic flush boxes of suitable way modular boxes and cover plates including PVC green insulated unsheathed 1.5 sqmm multistrand copper conductor FRLS cable as continous earthwire and connecting to earth duly, complete all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green)

All as per srl item above but MODULAR call Bell point complete all as specified and directed.

All as per item above but MODULAR 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.

All as per item above but MODULAR 3 pin 5 amps socket outlet on independent Board complete all as specified and directed.

All as per item above but MODULAR 15/16 Amps socket outlet on inependent board with 2.5 sqmm copper conducter FRLS cale and 2.5 sqmm PVC insulated unsheathed coper onductor cable FRLS (Green Colour) as earth lead complete all as specified and directed.

S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed. Make - Anchor/SSK/Cona Havells .

S&F socket outlet multi 5 pins 5 amp, complete all as specified and directed. Make - Anchor/SSK/Cona Havells

S&F switch socket combination 2 in 1, 5A flush type.Make - Anchor/SSK/Cona Havells

S&F switch piano flush button single pole, one way 15amps complete all as specified and directed. Make - Anchor/Plaza/Cona.

S&F socket outlet 2 in 1, 6 pins 15 amp, complete all as specified and directed. Make - Anchor/SSK/Cona Havells

S & F switch socket combination 3 pin 16A, flush type .Make - Anchor/SSK/Cona Havells

S&F ceiling rose, PVC/poly carbonate, isolated body three terminal complete all as specified and directed. Make - Anchor/SSK/Cona Havells

S&F Lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed. Make - Anchor/SSK/Cona Havells

Supply and Fix stepped type electronic fan regulator 1 module in white colopur. Make : Anchor/Cona/SSK.

S&F Modular switch 1 way 6 A, 1 module complete all as specified and directed.

S & F Modular switch 1 way 16A, 1 module complete all as specified and directed.

S & F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S & F of Modular Bell push 6A 1 module , complete all as specified and directed.

S & F of Modular Fan regulator 6A 1 module , complete all as specified and directed.

S & F in replacement LED light fitting 1x9W/1X10Wbulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.Make:-Havells/Syska/Wipro

Supply and fixing in replacement LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.Make:-Havells/Syska/Wipro.

Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. complete all as specified and directed.Make:-Havells/Syska/Wipro

Supply and fixing in replacement round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.all as specified and directed.Make:-Havells/Syska/Wipro

Supply and fixing in replacement LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.Make:-Havells/Syska/Wipro

S&F Bed side designer lamp, 5 watts, with LED lamp, including all wiring and switches required, with terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed by Engr-in-charge . Make Havells, Philips ,C&S

Supply and fix in replacement Decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED 20W B22 basewitth 1x20 watt LED lamp complete all as specified and directed by Engr-in-charge . Make Havells, Philips ,C&S

Supply and fixing Decorative wall light, stainless steel, rust free fixture with white glass diffuser suitable for 7.5 W LED filament lamp complete with drivers, holders, x 7.5 W LED filament lamp LHFOAJD1TZ1I060 9405 including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fix in replacement unique LED flood/ focus light 70 W LED 6500 K with IP 65 protection complete all as specified and directed by Engr-in-charge Make Havells, Philips ,C&S

M & L for sub main wiring with two single core 6 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLS ISI marked drawn into & including medium grade PVC conduit/ casing caping 25 mm dia with all fittings and accessories and one continuous run of 4 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed conealed/ surface including taking down old unserviceable submain wiring and making good disturbe surface complete all as specified and directed.Make of cable- Havells ,Plaza, Policab.Make of Casing Caping - Poly plast/ pressfit/ Presto plast.

M & L for sub main wiring with two single core 4 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor (FRLS) ISI marked drawn into & including medium gradePVC conduit/ casing caping 25 mm dia with all fittings and accessories and one continuous run of 2.5 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed conealed/ surface including taking down old unserviceable submain wiring and making good disturbe surface complete all as specified and directed.Make of cable- Havells ,Plaza, Policab.Make of Casing Caping - Poly plast/ pressfit/ Presto plast.

S&F sheet metal enclosure for DBs (single door type) when MCBs to be used single pole and neutral 4 way incl blanking plate as reqd with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. Make : Legrand, Havells/HPL.

S&F sheet metal enclosure for DBs (single door type) when MCBs to be used single pole and neutral 8 way incl blanking plate as reqd with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. Make : Legrand, Havells/HPL.

S&F sheet metal enclosure for DBs (single door type) when MCBs to be used single pole and neutral 12 way incl blanking plate as reqd with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. Make : Legrand, Havells/HPL.

S & F in replacement of old unsv sheet metal enclosures distribution boards, double door three phase 415 volts 6 ways vertical TPN DB for comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a)MCCB FOUR POLE 100 AMPS AC 415 VOLTS 25 KA=01 NO as incoming and 12 nos. MCB SP 40 Amps, C series as outgoing (Note :- (i)The DB shall be VTPN series of Schenieder Cat Part No:- A9HVD04L or equivalent in any of the make mentioned in list of product . (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped.(1v) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly (vi)MCCB's and MCB's should have a same make as of DB.

S&F single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 amp complete all as specified and directed. Make : Legrand, Havells/HPL.

MCB single pole & neutral 40 to 63 Amps 230 Volts'C' series, 10 KA complete all as specified and directed.Make: Havels /Legrand L&T,

S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series, all as specified and as directed by Engr -in-Charge. Make : Leggrand/Havells/HPL.

Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, all as specified and directed.

S & F in replacement bldg secuirty light fitting energy saving high efficiency LED street light fitting 25 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 32 mm dia bent to shape having length on less than 1.5 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage. Make: CROMPTON CAT REF. LSTS-25-CDL or technocommercially equivalent to Philips/ Wipro.

Supply & Fixing in replacement of Socket outlet 2 in 1, 3 pin, 5A complete in existing circuit complete as directed buy Engr-in-charge.

Supply & Fixing in replacement switch piano flush button single pole one way 5 Amp 230 volts in existing circuit as directed buy Engr-in-charge.

Supply and Fixing in replacement of socket outlet 2 in 1, 3 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.

Supply and Fixing in replacement of switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed.

Supplying & Fixing in replacement of Switch Bell push, flush type, 5 amp one way complete all as specified and directed by Engr-in-charge.

S&F in replacement of Buzzer Ding Dong, AC 230 Volts single Phase complete all as specified and directed by Engr-in-charge.

S & F in replacement lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings in existing circuit complete all as specified and directed.

Supply and Fixing in replacement Gang Box 15 Amp Switch socket combined complete all as specified and directed by Engr-in-charge.

Supply and Fixing in replacement Gang Box 5 Amp Switch socket combined complete all as specified and directed by Engr-in-charge.

S&F in replacement Hylum sheet 4x4 to 4x6 inches for fixing of switchs sockets including cutting for switch socket and fixing to existing sunken box with brass screw complete all as specified and directed by EIC

S & F in Repl of MCB SP 240 volts any rating from 6 to 40 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed.

S & F in Repl of MCB SPN 240 volts any rating from 6 to 40 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed.

S&F in replacement Hylum sheet 6x10 to 8x10 inches for fixing of switchs sockets including cutting for switch socket and fixing to existing sunken box with brass screw complete all as specified and directed by EIC

S & F in replacement of Modular Metal flush box 3 module, complete all as specified and directed.

S & F in replacement of Modular Metal flush box 4 module, complete all as specified and directed.

S & F in replacement of Modular Metal flush box 6 module, complete all as specified and directed.

S & F in replacement of Modular Metal flush box 8 module, complete all as specified and directed.

S & F in replacement of Modular Metal flush box 12 module, complete all as specified and directed.

S & F in replacement of Modular White cover plate with frame, 3 module, complete all as specified and directed.

S & F in Replacement of Modular White cover plate with frame, 4 module, complete all as specified and directed.

S & F in replacement of Modular White cover plate with frame, 6 module, complete all as specified and directed.

S & F in replacement of Modular White cover plate with frame, 8 module, complete all as specified and directed.

S & F in replacement of Modular White cover plate with frame, 12 module, complete all as specified and directed.

M&L rewinding of ceiling fan with super copper enamelled wire with suitable gauge, varnishing, oiling and greasing of any make of size 1200 /1400 mm sweep by dismantling its parts, capacitor by replacing petty items such as split pins,clamps, nuts & bolts, bearing & washer both end of down rod, cleaning of fan body and its blade by cleaning agent, assembling and connecting testing all as specified and as directed by Engr-in-Charge.

Painting of ceiling/ exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.

M&L rewinding of exhaust fan with super copper enamelled wire with suitable gauge, varnishing, oiling and greasing of any make of size 450 mm sweep by dismantling its parts, capacitor 4 Mfd by replacing petty items such as nuts & bolts,bearing & washers, cleaning of exhaust fan body and its blade by cleaning agent, assembling, and connecting and testing Complete.

Supply and fixing ball bearing suitable for Ceiling and exhaust fan of any sweep and make complete. Make : TATA/NBC/SKF.

Supply and fixing gun metal bush suitable for any sweep fan of any make.

Supply and fixing of Capaciter Capaciter 2.5/3/4 mfd. Make- USHA/ASIAN/EPCOS.

Supply and Replacement of unsv heating helemant with new one capacity of 1500 Watts (triangle type) for 25 Ltr geysers.

Supply and Replacement of unsv heating elemant with new one capacity of 2000 Watts for 25 Ltr geyser(triangle type).

Supply only of unsv heating helemant with new one capacity of 3000 Watts for 225 Ltr geyser.

Repair/Replacement of Thermostat 7''/9" suitable for 25/50 ltrs capacity water geyser with automatic thermal cutout fixed in repair and including testing, complete alla specified.

Repair/Replacement of copper Geyser Assembly with rubber paking for 25/50 ltrs capacity water geyser with automatic thermal cutout fixed in repair and including testing, complete alla specified.

S & F and testing of compressor for split type air conditioner of capcity 1.5/2 ton and taking down of UNSV compressor, all as specified and directed by Engr-in-charge Make of AC - LG, Samsung.

S & F and testing of thermistor (temprature Sensor) for split type air conditioner of capcity 1.5/2 ton and taking down UNSV Blower, all as specified and directed by Engr-in-charge make of AC - LG, Samsung.

S & F and testing of PCB for split type air conditioner of capcity 1.5/ 2 ton and taking down UNSV PCB, all as specified and directed by Engr-in-charge make of AC - LG, Samsung.

S & F and testing of Blower for split type air conditioner of capcity 1.5/2 ton and taking down UNSV Blower, all as specified and directed by Engr-in-charge make of AC - LG, Samsung.

S & F and testing of transformer for split type air conditioner of capcity 1.5/2 ton and taking down UNSV Blower, all as specified and directed by Engr-in-charge make of AC - LG, Samsung.

S & F and testing of out door unit fan blade for split type air conditioner of capcity 2/ 1.5 ton and taking down UNSV Sensor, all as specified and directed by Engr-in-charge make of AC - LG, Semsung .LG.

S & F and testing of outer unit fan motor of split type air conditioner of capcity 1.5/2 ton and taking down of UNSV fan, all as specified and directed by Engr-in-charge make of AC - LG, Samsung .LG.

S & F and testing of 2 Way Valve Assembly of split type air conditioner of capcity 1.5/2 ton and taking down of UNSV fan, all as specified and directed by Engr-in-charge make of AC - LG, Samsung .LG.

Supply and fixing of Capaciter 50 MFD for 1.5 / 2 ton AC complete all as specifide and directed.

M&L for Repair and replacment unserviceable wornout/ Burnt parts of Voltage Stablizer upto 10 KVA of any make complete all as specified and directed by Engr-in-charge

Supply and refilling of gas R-22/ R-410/R32/ R134a for split/ window/ central package type Air conditioners and Refrigerators incl checking and fixing leakage complete all as specified and directed by Engrs-in-charge.

GH MOHD SHAH AND CO

M/S AB AHAD RATHER

M/S MOHD YOUSUF CONSTRUCTION CO

POPULARHARDWARESTORE

M/S MOHD MAQBOOL RATHER

Bidder Name

M/S S. D. BUILDERS

M/S AB AHAD RATHER

POPULARHARDWARESTORE

GH MOHD SHAH AND CO

M/S MOHD YOUSUF CONSTRUCTION CO

M/S MOHD MAQBOOL RATHER