12/SE/2022-23

Amount

Scraping old painted surface including disposal of all scraped material to a distance of 30 m asdirected by Engineer- in- charge. i/c all cost of labour and T&P etc.

Earth work in cutting for sub grade in all type of soil with all lift and lead up to 30 M including ramming , dressing and manual compection with all cost of material, labour and T&P etc.

Providing & Laying RBM/GSB 200 mm thick well compacted thick i/c all cost of material, labour and T&P etc. complete .

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405..

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.

Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 1.20 kg/sqm using mechanical means as per Technical Specification Clause 502.

Providing and applying tack coat with Bitumen (RS1) using emulsion pressure distributor at the rate of 0.40 kg per sqm on the dry hungry/prepared granular surfaces treated with primer & cleaned with Hydraulic broom as perTechnical Specification Clause 503

20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/ modified bitumen S-65) Binder Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either usingpenetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished torequired level and grades to be followed by seal coat of Type B as per Technical Specification Clause 508..

Providing and laying seal coat sealing the voids in a bituminous (S-65) surface laid to the specified levels, grade and cross fall using Type B, as per Technical Specification Clause 510.

Providing and Laying First class Brick brick lining on both sides of the road of 7 cm wide , 11 cm deep , laid with mud mortar in proper alignment and also dressing and ramming the excavated earth i/c all cost of material , labour and T&P etc..

M-150 Brick on edge pavement on patries with laid dry filling joints with local sand i/c prepration of base to proper slope and its ramming spreadinglayer of 1 cm depth of local sand over the surface and including all cost of material, labour and T&P etc. complete .

Providing and Laying of hot applied thermoplastic compound 2.5 mm thick i/c reflectorising glass bead @ 250 gms per sqm thickness of 2.5 mm is exclusive of surface applied glass as per IRC;35 The finished surface to be level, uniform and free streaks and holes Rates are inclusive of all taxes royality etc. all T&P / machine Material and labour required for proper completion of work.

Earth work in filling in all type of soil by Power transported earth all lift and lead up to 1.00 Km including ramming , dressing and manual compection with all cost of labour and T&P etc