Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.4 LAccepted-AOC AZAD NAGAR RANJHI JABALPUR MP 482010 INDEX NO E 106 JBP | JABALPUR | MADHYA PRADESH | 482010 | L1 | Accepted-AOC Lowest amount quoted | |
| 2 | L2₹45.6 L+₹4.1 L (9.82%)Rejected-Finance | L2 | Rejected-Finance Second lowest amount quoted | |
| 3 | L3₹48.9 L+₹7.4 L (17.9%)Rejected-Finance 403 NARSINGH NAGAR RANJHI JABALPUR MP PIN 482005 | JABALPUR | JABALPUR | MP | 482005 | L3 | Rejected-Finance Third lowest amount quoted | |
| 4 | L4₹50.1 L+₹8.6 L (20.8%)Rejected-Finance B 72 RAJUL TOWNSHIP TILHARI MANDLA ROAD JABALPUR MP PIN 482021 | JABALPUR | MADHYA PRADESH | 482021 | L4 | Rejected-Finance Highest amount quoted |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
16 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Justin O A, AE (Civ)
Garrison Engineer (East), Near COD Estate, Ranjhi, Jabalpur (MP)-482011
WELCOME MAINTENANCE OF JCOS AND OR MD ACCN OF COD AND 506 ABW UNDER AGE B/R-II OF GE(EAST) JABALPUR
2023_MES_621546_1
8588/E8
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer (East) Jabalpur
D a (i)
8 documents required · 8 mandatory
₹500
Garrison Engineer (East) Jabalpur
₹1 L
Yes
18 Apr 2024
13 Oct 2023
18 Nov 2023
13 Oct 2023
16 Nov 2023
28 Oct 2023
13 Oct 2023 - 20 Oct 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.
Demolition of cement concrete un reinforced in ground floor and paving n.exc 15 cm thick (below or above ground level) complete all as specified and directed.
Removing rubbish to a distance exc 1.5 Km but n.exc 5.0 Km out side MD land complete all as specified and directed.
M&L for Non Skid Coloured Ceramic Tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of CM 1:6 for laying floor finishes complete all as specified and directed. Note - The size of tiles (except thickness) may be varied during execution without any price adjustment.
M&L for Non Skid Coloured Ceramic Tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of CM 1:6 for laying floor finishes complete all as specified and directed. Note - The size of tiles (except thickness) may be varied during execution without any price adjustment.
M&L for Non Skid Coloured Ceramic Tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of CM 1:6 for laying floor finishes. Complete all as specified and directed. Note - The size of tiles (except thickness) may be varied during execution without any price adjustment.
M&L for Glazed Coloured Ceramic Tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick in vertical surface such as dado/skirting/risers to steps etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including rendering 10 mm thick in CM 1:4 complete all as specified and directed. Note - The size of tiles (except thickness) may be varied during execution without any price adjustment.
M&L for 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M&L for machine cut kota stone slab flooring 18 to 20 mm thick in riser of steps skirting dado in pillar with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing & 20 mm thick CM 1:6 screed bed complete all as specified and directed.
M&L for machine cut Kota stone slab 20 to 25 mm thick in riser of steps, skirting, dado & pillar over & including rendering 15 mm thick in CM 1:4, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.
M&L for machine cut Kota stone slab flooring 20 to 25 mm thick over & including 20 mm thick screed bed or bedding layer of CM 1:6 for laying floor finishes, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.
M&L for machine cut kota stone slab flooring 18 to 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description & in any position not otherwise specifically provided for complete all as specified and directed.
M&L for cement concrete 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in sub base flooring average 25 mm thick surface finished even and rough (as in levelling course) to receive the topping layer complete all as specified and directed.
M&L for cement concrete 1:3:6, 75 mm thick type C-2 using 40 mm graded crushed stone aggregate as in plinth protection etc & finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
M&L for cement concrete 1:3:6, 75 mm thick type C-1 using 40 mm graded crushed stone aggregate as in floor finishes and finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
M&L for cement concrete1:3:6, 100 mm thick type C-2 using 40 mm graded crushed stone aggregate as in floor finishes and finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
M&L for cement concrete 1:4:8, 75 mm thick type D-2 using 40 mm graded crushed stone aggregate as in floor as sub base finishes and finishing cement concrete surface even and smooth using extra cement complete all as specified and directed.
M&L for cement concrete 1:4:8, 75 mm thick type D-2 using 40 mm graded crushed stone aggregate as in floor as sub base in patches complete all as specified and directed.
Machine cut cudapph stone slab on cooking platform/shelf 20 to 25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for rounding to edges of granite stone slabs one edge, such as in cooking platform, and other similar situations complete all as specified and directed.
M&L for Hardcore of broken stone or boulders of gauge n.exc 63 mm, deposited, spread & levelled in layers n.exc 15 cm thick, watered & rammed to a true surface complete all as specified and directed.
M&L for providing Glass dividing strips, 3 mm thick and 38 mm width of strip in plinth protection for making panels complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed.
M&L for brick work with old size flyash bricks, straight or curved on plan exceeding 6m mean radius, built in CM 1:6 complete all as specified and directed.
M&L for brick work with old size flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:6 complete all as specified and directed.
M&L FLY ASH brick work using old bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:6 and to be finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:4 and to be finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for rendering 10 mm thick on RCC ceiling surface in CM 1:3 and finished even and smooth (without using extra cement) complete all as specified and directed.
M&L 10 mm thick plaster in CM 1:3 finished even & smooth without using extra cement in patches complete all as specified and directed.
M&L for rendering 5 mm thick on RCC ceiling surface in CM 1:3 and finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying three coat of white wash on wall and prepared brick work or concrete surfaces complete all as specified and directed.
M&L for preparation of new decorated surfaces of walls and applying tow coat of disstempering with acrylic washable distemper oil emulsion white or tinted complete all as specified and directed.
M&L for preparation of new plastered or unplastered surface of walls and applying two coat of cement base paint on walls complete all as specified and directed.
M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying two coat of cement based paint over & including one coat of alkali resistant priming paint on wall and prepared brick work or concrete surfaces complete all as specified and directed.
M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying two coats of oil bound distemper over & including one coat of alkali resistant priming paint on wall and prepared brick work or concrete surfaces complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of ceiling and apply three coat of white wash on prepared ceiling surface complete all as specified and directed.
M&L for preparation of old decorated surfaces of ceiling and apply three coat of white wash on prepared ceiling surface complete all as specified and directed.
M&L for preparation of old decorated surfaces of ceiling and apply one coat of plastic emulsion paint on prepared ceiling surface complete all as specified and directed.
M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying 2 mm thick Wall Care Putty on newly plastered or unplastered brick work or concrete surfaces complete all as specified and directed.
M&L for preparation of old decorated surfaces of wall by complete removal of existing treatment and applying two coat of oil bound distemper over a coat of birla wall care putty complete all as specified and directed.
M&L for preparation of new decorated surfaces of walls and applying two coat of oil bound distemper over a coat of birla wall care putty complete all as specified and directed.
M&L for applying two coat of oil bound distemper on brick work or concrete surfaces over & including one coat of alkali resistant priming paint on wall and prepared brick work or concrete surfaces complete all as specified and directed.
M&L for complete removal of existing treatment on brick work or concrete surfaces & applying 2 mm thick Wall Care Putty on brick work or concrete surfaces complete all as specified and directed.
M&L for applying two coat of oil bound distemper on brick work or concrete surfaces over & including one coat of alkali resistant priming paint on prepared brick work or concrete surfaces complete all as specified and directed.
M&L for applying two coat of plastic emulsion paint on brick work or concrete surfaces over & including one coat of alkali resistant priming paint on prepared brick work or concrete surfaces complete all as specified and directed.
M&L for complete removal of existing treatment on ceiling surfaces & aplying 2 mm thick Wall Care Putty on ceiling surfaces complete all as specified and directed.
M&L for applying two coat of plastic emulsion paint on ceiling surfaces over & including one coat of alkali resistant priming paint on prepared ceiling surfaces complete all as specified and directed.
M&L for preparation of old painted brick work or concrete surfaces & applying one coat of plastic emulsion paint on brick work or concrete surfaces complete all as specified and directed.
M&L for preparation of old painted ceiling surfaces & applying one coat of plastic emulsion paint on ceiling surfaces complete all as specified and directed.
M&L for preparation of old painted brick work or concrete surfaces & applying one coat of white wash on brick work or concrete surfaces complete all as specified and directed.
M&L for preparation of old painted brick work or concrete surfaces & applying one coat of cement based paint on brick work or concrete surfaces complete all as specified and directed.
M&L for preparation of old painted brick work or concrete surfaces & applying one coat of oil bound distemper on brick work or concrete surfaces complete all as specified and directed.
M&L for preparation of old painted ceiling surfaces & applying one coat of white wash on ceiling surfaces complete all as specified and directed.
M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for painting to new steel surfaces of any description, over 10cm width or girth with two coats with synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.
M&L for preparation of old painted Steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of Synthetic enamel paint (ordinary tint) complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) n.exc 250 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old unserviceabale water storage tank and removing to store complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) exc 250 litre but n.exc 500 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old unserviceable water storage tank and removing to store complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) exc 500 litre but n.exc 1000 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old unserviceable water storage tank and removing to store complete all as specified and directed.
S&F in repair PVC Tank cover for Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 or 1000 litre capacity fixed in position with nuts and bolt complete all as specified and directed.
Petty repairs to leaking water in bib taps, pillar taps stop cock, angle valve, PVC connection waste pipes, float valves, concealed stop cock, GI pipe joints bottle traps etc of any description by changing the washers etc or any other minor accessories to make the system functional complete all as specified and directed.
S&F in repair 15mm bore bib tap chorime plate alloy with crutch or butterfly handels screwed down for iron pipes or for brass ferrule complete all as specified and directed.
S&F ball valves for 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (minimum weight 210 gms) complete all as specified and directed.
S&F ball valves for 25 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (minimum weight 455 gms) complete all as specified and directed.
S&F in repair ball valves for 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (minimum weight 210 gms) complete all as specified and directed.
S&F in repair ball valves for 25 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (minimum weight 455 gms) complete all as specified and directed.
S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 15 mm bore dia of pipe complete all as specified and directed.
S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 20 mm bore dia of pipe complete all as specified and directed.
S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 25 mm bore dia of pipe complete all as specified and directed.
S&F in repair gun metal half turn flush cock for 32 mm bore pipe with iron wheel head, screwed both ends for iron pipes complete all as specified and directed.
S&F in repair 15 mm bore concussive push button type self closing tap of cast copper alloy chromium plated screwed iron pipes complete all as specified and directed.
S&F in repair self closing tap 15 mm bore lift type of cast iron or malleable cast iron chromium plated screwed for pipes complete all as specified and directed.
Taking up or down 15 mm bore of pipe steel tubing and connections, including cleaning for refixing complete all as specified and directed.
Taking up or down 20 mm bore of pipe steel tubing and connections, including cleaning for refixing complete all as specified and directed.
S&F 15 mm bore GI tubes, 'medium grade' galvanised, with all fittings fixed complete to walls & ceilings or laid in floors complete all as specified and directed.
S&F 20 mm bore GI tubes, 'medium grade' galvanised, with all fittings fixed complete to walls & ceilings or laid in floors complete all as specified and directed.
Refixing 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed.
Refixing 20 mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed.
Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) of 15 mm bore of pipe complete all as specified and directed.
Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) of 20 mm bore of pipe complete all as specified and directed.
Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.
S&F, PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.
S&F, PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.
S&F, PVC (SWR) pipes 40 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.
S&F 100mm dia Stack clampsout of 50 mm by 5 mm flat iron and 16 mm dia around iron stays including bolts and nuts and securing ends of stays to wall or roof making good all respect complete all as specified and directed.
S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.
S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.
S&F PVC (SWR) bends ISI marked any radius of 40 mm bore with access door complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or unequal of 110 mm bore of pipe complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or unequal of 75 mm bore of pipe complete all as specified and directed.
S&F PVC (SWR) branch pices (single Y) equal of 110 mm bore of pipe complete all as specified and directed.
S&F PVC (SWR) branch pices (single Y) equal or unequal of 75 mm bore of pipe complete all as specified and directed.
S&F PVC (SWR) junction single, (double T) equal or unequal of 110 mm bore of pipe complete all as specified and directed.
S&F PVC (SWR) junction single, (double T) equal or unequal of 40 mm bore of pipe complete all as specified and directed.
M&L for cleaning and removing all scale and dirt, etc from RCC/PVC tanks exc 250 ltr & n.exc 500 ltr capacity & from mouths of circulating pipes, etc including washing of water tank with the use of Tank cleaning motor jet pressure machine and using bleaching powder & writing date of cleaning with any type of paint including disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.
M&L for cleaning and removing all scale and dirt, etc from RCC/PVC tanks exc 500 ltr & n.exc 1000 ltr capacity & from mouths of circulating pipes, etc including washing of water tank with the use of Tank cleaning motor jet pressure machine and using bleaching powder & writing date of cleaning with any type of paint including disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.
M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement : 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed. Note - Payment for providing grooves shall be made separately.
M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engr-in-Charge.
S&F in repair 15 mm bore, fancy type, chromoium plated Bib taps, cast aopper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair 15mm bore PVC bib taps complete all as specified and directed.
Taking down bib tap/wash basin tap/pillar tap/stop cock/mixture tap and refixing the same after repair and replacement of washer only for 15 mm bore size without replacing spindles complete all as specified and directed.
Taking down bib tap/wash basin tap/pillar tap/stop cock/mixture tap and refixing the same after repair and replacement of spindles for 15 mm bore size complete all as specified and directed.
S&F in repair, brass chromium plated Wall Mixer with provision for overhead shower with 115 mm long bend pipe on upper side, connecting legs & wall flanges for 15 mm bore of pipe complete all as specified and directed.
S&F in repair, brass chromium plated Wash Basin Mixer with raised 'J' shaped swinging spout (Table Mounted Model) with 450 mm long braided hoses for 15 mm bore of pipe complete all as specified and directed.
S&F in repair, Brass chromium plated Sink Mixer with raised 'J' shaped swinging spout (Wall Mounted Model) with connecting legs & Wall flanges for 15 mm bore of pipe complete all as specified and directed.
S&F vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but incl brackets complete all as specified and directed.
S&F in repair, chromium plated Angular Stop Cock with wall flange for 15 mm bore of pipe complete all as specified and directed.
S&F in repair, chromium plated Two-way Bib Cock for 15 mm bore of pipe complete all as specified and directed.
S&F in repair 15mm bore Swan Tap Type Pillar Cock Single Tappillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, att complete all as specified and directed.
S&F in repair, 15 mm dia of bore, fancy type, chromium plated stop valves, cast copper alloy, with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repair, 15 mm dia of bore, fancy type, chromium plated stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repair, 15 mm dia of bore, fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed.
S&F in repair chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed.
S&F in repair brass CP bath Mixer (2/3 hole) for mixing Hot & Cold water arrangement, long shank suitable 15mm bore of pipe of approved quality screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repair 20 mm bore stop valves chorime plate alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union complete all as specified and directed.
S&F in repair 15mm bore PVC stop valves complete all as specified and directed.
S&F in repair, 32 mm bore, brass chromium plated bottle traps for Wash basins with inlet & outlet screwed for pipe or connections including necessary packing, union & cap & fixed complete all as specified and directed.
S&F in repair, 32 mm bore, PVC waste pipe for Wash Basin/Kitchen Sink etc complete all as specified and directed.
S&F in repair, 32 mm bore dia of discharge pipe, waste coupling of PTMT (half or full threaded) (minimum weight 32 mm-45 gms) etc complete all as specified and directed.
S&F in repair, 32 mm dia of bore, Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F in repair, 40 mm dia of bore, Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F in repair waste fitting suitable for stainless steel kitchen sink complete all as specified and directed.
S&F in repair 125mm/ 150mm dia mild steel chromium plated grating fixed on floor trap/nahni trap in CM 1:6 complete all as specified and directed.
S&F in repair, chromium Plated Grating, 100 mm dia with waste hole fixed on floor trap, nahani trap etc complete all as specified and directed.
S&F in repair, Toilet Seat/Commode Jet Spray (Regular Type) (1.50 meter) Stainless Steel Grade 304 (Built-in Installation Type) for 15 mm dia of bore of pipe complete all as specified and directed.
S&F in repair, Health Faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube & ABS wall hook including making connections & fixed in position complete in all respect as specified and directed.
Petty reapirs to high/low level flusing cistern by adjusting the float valve, leakage PVC connection PVC/GI bend including replacing of rubber washer cheek nuts plunges etc for any type of flush complete all as specified and directed.
S&F in repair, Vitreous china wash basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain & plug & porcelain stopper but including bracket & including supply & fixing of 32 mm dia of bore, brass chromium plated waste coupling complete all as specified and directed.
S&F in repair, Vitreous china wash down water closet pan (pedestal pattern), white, with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed.
S&F in repair, plastic water closet seat cover, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F in repair, Vitreous China squatting pan, ‘Orissa’ Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) with cast iron trap portion to match with the existing surface of floor complete all as specified and directed.
S&F in repair, Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
S&F in repair, sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
S&F in repair staniless steel sink 1 mm thick without drainage board for kitchen with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union to waste pipe etc, overall size 495 x 420mm with bowl size 410 x 330 x 160mm complete all as specified and directed.
S&F stainless steel plate rack, 0.56 mm thick of standard pattern, 31” x 36” size including fixing to wall with 4 Nos 50 mm long screws & PVC rawl plugs complete all as specified and directed.
S&F in repair, 1 mm thick, Stainless Steel Plate Rack of overall size 24 inch x 36 inch x 10 inch including fixing with rawal plug and screws complete all as specified and directed.
S&F in repair, 10 ltrs capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S&F in repair internal fitting for 10 ltrs capacity PVC valveless, syphonic action type flushing cistern complete all as specified and directed.
S&F in repair flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern complete all as specified and directed.
S&F in repair, 125 mm size, Brass chromium plated shower rose with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.
S&F in repair 125 mm dia Brass chromium plated shower rose fancy type fixed to 15mm bore pipe complete all as specified and directed.
S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.
S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.
S&F in repair Brass Chromium Plated, tubular towel rail, 20 mm dia, D type, 60 cm long between flanges etc complete all as specified and directed.
S&F in repair 75 mm diameter of outlet, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
M&L PVC (SWR) mulit trap 75 mm, setting and jointing with solvent cement complete all as specified and directed.
M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
S&F in repair Soap Dish Holder any type fixed to plug with chromoium plated brass screw complete all as specified and directed.
S&F in repair chromium plated glass shelf of size 22" complete all as specified and directed.
S&F in repair, Corner Glass Shelf with brackets complete all as specified and directed.
S&F in repair Stainless Steel Double Coat Hook complete all as specified and directed.
S&F in repair Sheet Glass Shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.
S&F in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed.
S&F in repair Door Seal with aluminium beading and 50 mm wide rubber seal, fixed to Aluminium/Wooden doors complete all as specified and directed.
S&F Door Seal rubber etc complete all as specified and directed.
Taking down shutters of any description n.exc 1 sqm each leaf and refixing in same opening after easing and adjusting & also refixing builders hardware as required including renewal of unserviceable screws, etc complete all as specified and directed.
Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each leaf and refixing in same opening after easing and adjusting & also refixing builders hardware as required including renewal of unserviceable screws, etc complete all as specified and directed.
S&F in repair 100 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F in repair 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F in repair butt hinges 100mm size by welding to angle iron chowkhat complete all as specified and directed.
S&F in repair Aluminium anodised Butt hinges medium weight minium 100mm long complete all as specified and directed.
S&F in repair Aluminium anodised Butt hinges medium weight minium 75mm long complete all as specified and directed.
S&F in repair Aluminium handles cast type anodised of 150mm complete all as specified and directed.
S&F in repair Aluminium handles cast type anodised of 100mm complete all as specified and directed.
S&F in repair Brass handles cast type anodised of 150mm complete all as specified and directed.
S&Fin reapir Brass handles cast type anodised of 100mm complete all as specified and directed.
S&F in repair mild steel pressed handles cast type anodised of 150mm complete all as specified and directed.
S&F in repair mild steel pressed handles cast type anodised of 100mm complete all as specified and directed.
S&F in repair Mortice lock, vertical type size 100 mm 4 lever complete all as specified and directed.
S&F in repair, 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.
S&F in repair, 75 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.
S&F in repair, 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy & fixed complete all as specified and directed.
S&F in repair, 300 mm, mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads and supply and fix sheet glass ordinary quality 4.8 mm thick in square exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads and supply and fix figured glass ordinary quality 4mm thick in square n.exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified and directed.
S&F Sheet glass 5.5 mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.
S&F in repair sheet glass 6.3 mm thick quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.
S&F Sheet glass 10 mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.
S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.
S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and directed.
S&F in repair, aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.
S&F in repair, 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.
S&F in repair, 75 mm size, hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate & fixed with screws complete all as specified and directed.
S&F in repair, Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.
S&F in repair, floor door stopper of aluminium alloy body and tongue, anodised, over all length of cover plate 140 mm, with hard drawn steel spring, fixed in door complete all as specified and directed.
S&F in repair, Single Door PVC Cabinet Mirror of size 350 mm x 450 mm with internal shelves complete all as specified and directed.
S&F in repair, Stainless Steel Towel Ring Round complete all as specified and directed.
S&F in repair, Stainless Steel Towel Rack 600 mm long with lower hangers complete all as specified and directed.
S&F in repair, Europian WC, Single Piece, Vitreous China with UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories, Size: 360 mm x 655 mm x 765 mm, P Trap-180 mm complete all as specified and directed.
Taking down Chowkhats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed.
Taking down Chowkhats or frames exc 1.50 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed.
Taking down Shutters of any description area exc 1 sqm & n.exc 2 sqm each and removing to store complete all as specified and directed.
S&F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specification & drawing complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and drawing complete all as specified and directed.
S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S&F 125 mm x 60 mm size pressed Steel Frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering. Doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, conforming to Fe-290 (Gde-E-165) complete all as specified and directed.
S&F 35 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
M&L for 35mm thick second class hard wood flush shutters solid core construction with block board core and plywood face panels commerical type on both side rebated & prepared to receive glass all as specified in SSR Part-I section 8, clause 8.20 (b) complete all as specified and directed.
S&F 35 mm thick, second class hardwood factory made, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
Solid PVC Door Frame (Single rebated) of size 60mmx 30 mm made out of soild PVC Foam with homogenous fine celluar structure having smooth outer integral skin with 100 x 8 sheet metal CSK SCREWS complete all as specified and as shown on drawing. Note : Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strenght to fixed hings and hld door properly for long life.
M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm in width or girth, not otherwise described & applying two coat of synthetic enamel paint (ordinary tint) over & including one coat of red oxide, zinc chrome primer complete all as specified and directed.
S&F aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth & apply two coat of synthetic enamel paint (ordinary tint) over & including a coat of pink primer complete all as specified and directed.
S&F mild steel flat iron as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; will ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and directed.
M&L for cutting holes in brick walls exc half brick but n.exc one brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.
S&F 100 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.
S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy & fixed complete all as specified and directed.
S&F in repair, 18/19 mm thick, high density PVC/WPC solid fibre board with prelaminated PVC sheet as kitchen cupboard and frame including taking down the old cupboard shutters and removing to store complete all as specified and directed.
S&F in repair 18/19 mm thick water proof block board of commercial quality Gde-I fixed with screws as kitchen, cup board box and shutters & shelves etc complete all as specified and directed.
S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 40 mm complete all as specified and directed.
S&F magnetic catcher with nut and screw of mild steel bright finish complete all as specified and directed.
S&F 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.
S&F 5 mm thick Figured glass, pin head type for uPVC white colour fixed or lovoured window/ventilator in squares n.exc 0.5 sqm in each pane complete all as specified and directed.
Supply only Integral waterproofing compound (ISI Mark) complete all as specified and directed.
S&F, in repair, HDPE water storage tank lid black (with arrangement for locking) for 500 litres capacity tank complete all as specified and directed.
S&F, in repair, HDPE water storage tank lid black (with arrangement for locking) for 1000 litres capacity tank complete all as specified and directed.
S&F, in repair, PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size complete all as specified and directed.
Brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and directed.
S&F in 100 mm repair steel window handles with nuts & bolts or with screws complete all as specified and directed.
S&F in repair steel window peg stay complete all as specified and directed.
S&F solar control film 25 micron reflective type (gareware sun control or equivalent) complete all as specified and directed.
M&Lfor 12 mm thick in repair plywood grade BWR, type BB, fixed with screws ro timber frame work, shelves etc complete all as specified and directed.
S&F 0.90 mm thick decorative laminated type-I of surface finish colour and patten as approved, fixed with approved adhesiva as manufacture complete all as specified and directed.
S&F, factory made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
S&F factory made plain framed, 40 mm Panelled shutter (two Panel) with lock rail of 9 mm B.W.P. commercial ply or 12 mm veneered patticle boar with commercial veneering on both face , the size of rail and stile as per IS: 1003 (Part 1) kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples beads or in steel window complete all as specified and directed.
S&F steel window with side hung shutters including box type hinges with steel handle, steel peg stay, complete with glazing bars, dovetailed and welded or ventilators, fixed type, with glazing bar complete all as specified and directed.
S&F steel window with side hung shutters including box type hinges with steel handle, steel peg stay, complete without glazing bars cooler type window, dovetailed and welded or ventilators, fixed type, with glazing bar complete all as specified and directed.
S&F 'in repair' 18 mm thick, PVC sheet one side prelaminated of approved texture ("Celuca ply of Rajshree make or equivalent in "Sintex" as approved by GE ) as in Kitchen cabinet and cupboard (withshelves and partitions) including necessary fitting & fixture as per manuacturer's instructions complete all as specified and directed.
S&F in repair brass sliding door bolt with brass hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or brass of bolt 250mm complete all as specified and directed.
M&L 75 mm Z-Section Window hingsmedium weight cold rolled mild steel complete all as specified and directed.
Welding in repairs n.exc 2.5 cm in length (one welder with helper as per requirment base must be depolyed within 12 hours, other wise penlty for Rupees 500.00/Per Day shall be imposed).
Welding in repairs exc 2.5 cm but n.exc 5 cm in length (one welder with helper as per requirment base must be depolyed within 12 hours, other wise penlty for Rupees 500.00/Per Day shall be imposed).
S&F curtain dropary 25 mm dia and 1.5 mm thick mild steel rod of fancy type with PVC coating excluding brass and brackets with curtain rings of approved quality etc complete all as specified and directed.
S&F mild steel Nobs and bracket complete all as specified and directed.
M&L for floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed to aluminium door etc complete all as specified and directed.
S&F in repair door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding suitable for door shutters of 701-805 mm in width & weight between 36-60 kg complete all as specified and directed.
S&F frame work for railing fixed to wall/ floor made with 50 mm/40mm/30mm stainless steel (202) pipe including cutting & necessary welding as per drawing complete all as specified and directed.
S&F, Aluminium anodised sections for doors/windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engr-in-Charge including handles, tower bolts, grills, etc complete all as specified and directed. Note :- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately.
Taking down aluminium door shutter including floor door closer, removing galss with beading before taking down and refixing of glass, beading and floor door closer after replacing broken parts of aluminium shutter including easing of shutter complete all as specified and directed.
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
M&L brick work using old bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
M&L brick work using old bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.
M&L for colour rubber moulded chequered cement concrete tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with white cement and pigments complete all as specified and directed.
M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
Moorum/red bajri, filling in floors or pavings, laid inlayers n exc any thickness spread, levelled and rammed including watering.
M&L for machine pressed precast cement concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.
M&L for Machine pressed precast cement concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in floor finishes 25 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in floor finishes 40 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed. Note- Glass dividing strips shall be measured & paid separately as supply only.
M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in floor finishes 50 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed. Note - Glass dividing strips shall be measured & paid separately as supply only.
M&L for ENDURA out door tiles 30 cm x 30 cm x 10 mm thick rubberised mould set, jointed and pointed in neat cement slurry as in floors etc . (Make-H & R Johnson, Brand-Endura designer digital series) & Screed bed or bedding layer of CM 1:6, 15 mm thick for laying ceramic tiles/granite floor finishes complete all as specified and directed.
M&L for ENDURA out door tiles 60 cm x 60 cm x 10 mm thick rubberised mould set, jointed and pointed in neat cement slurry as in floors etc. (Make-H & R Johnson, Brand-Endura designer digital series) & Screed bed or bedding layer of CM 1:6, 15 mm thick for laying ceramic tiles/granite floor finishes complete all as specified and directed.
M&L for Granite (Black/Ruby Red ) work (table rubbed and polished) 20 mm thick in cooking platforms bedded and jointed with grey cement slurry and pointed to match the shade of granite stone including grinding and polishing types including screed bed 15 mm thick in CM 1:6 complete all as specified and directed.
Schedule of credit amount of Rs. 1,09,291.00 to be deducted during AOC.
ISHWAR CONSTRUCTION COMPANY
LAL SINGH & SONS
GHANI CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .