GE/BAS-11/2024-25 Repair to facia, chajjas, plaster work, glass panes and misc works in Md and OTM accn at Basoli mil Stn under GE Basoli

Amount

M & L Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 including at the edges of roof or any where at any height complete all as specified and directed

Ditto all as per item No 1 here-in-before but except bricks

Demolition of reinforced cement concrete as Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

M&L for RCC M-20(Nominal mix) using 20mm graded crushed stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including form work as requirement at site complete all as specified and directed.

Demolition of brick work, built in cement mortar including all quoins, pillars etc. complete all as specified and directed

M&L TMT Steel bars 8 to 10 mm dia cut to length, bent to shape required incl cranking bending spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips .complete all as specified and directed.

M&L For Rendering 15mm thick in cement and sand mortar 1:6 on fair faces of briick work or cement concrete surfaces including finishing the sufaces even and smooth without using extra cement including Preparation of newly plasterd surfaces of walls and applying two coats of oil bound distemper over one coat of primer and wall care putty including taking down old plaster complete all as specified and dirceted .

M&L For Rendering 15mm thick in cement and sand mortar 1:4 finished fair even and smooth without using extra cement including Preparation of newly plasterd surfaces of walls and applying two coat of cement base paint over a coat of primer including taking down old plaster complete all as specified and dirceted .

M&L Rendering 5mm thick in CM 1:3 on any sufaces of brickwork, finished even and smooth without using extra cement including Preparation of new plasterd or unplastered surfaces of celling and applying three coat white wash on ceiling including taking down old plaster complete all as specified and dirceted .

M & L for preparation of old decorated plastered or un plastered surface of walls and applying Two coat of oil bound distemper upto any height filling the gap or unequal surface with cement mortar /chalk whiting/Putty in any shade complete all as specified and directed.

M & L for preparation of old decoratede plastered or un plastered surface of wall and applying one coat of cement base paint including scaffolding and filling the gap or unequal surface with cement mortar /chalk whiting/Putty upto Third Floor of any tinnt to match existing shade complete all as specified and directed.

M&L For preparation of old decorated surfaces of wall and facia /chajjas and applying one coat weather proof apex paint upto third floor Complete all as specified and directed

M&L For making good the surfaces of chajjas, facia with cement mortar 1:3 or PCC 1:1.5:3 including steel bars 8mm/10mm/12mm/16mm/as per site requirement with stirrups Including taking down , dismantling of broken/loose portion of chajjas, facia of any dimention and making good the surfaces with cement mortar 1:3 or PCC 1:1.5:3 including steel bars 8mm/10mm/12mm/16mm/as per site requirement with stirrups , including welding work if required and necessary form works /scaffolding and matching with existing sufaces of facia,(including white wash /colour wash or cement base paint /apex paint as directed by Engg in-charge) including water curing complete all as specified and directed. Note: The work shall be carried out by necessary form work /scaffolding and removed after the completion of work and safaty norms will be maintained by contractor as per safety Manual.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and directed.

75mm thick PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protection laid in bays complete including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and directed .

Plain cement concrete padding 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) of uniform thickness 25mm, padding shall be furnished even and smooth w/o using extra cement,complete all as specified and directed .

M& L applying water proofing membrane APP (Atactic Polypropylene Polymer) modified membrane with non-woven polyster reinforcement/mat with thermal insulation of weight not less than 3.6 kg/sqm and thickness not less than 3 mm (reinforced) with polyester Non woven fabric weighing not less than 160 gms per sqm , laid by torch application method with overlap 100 mm on length side and 100 mm on the width side over a solvent based bitumen primer @ 0.3 Ltr Sqm by the same manufacturer conforming to IS:3384-1986 on prepared surfaces including 20 mm thick screed bed in cement mortar (1:4) even and fair & including taking out /demolition of old treatment complete and removal of debrises not exceeding 50 mtr and depositing where directed complete all as specified and directed.

S&F structural steel work as in frames of PPGI facia, roof trusses (framed), trussed purlins, crane gantries, rails and fastening and heavy brackets (Beam, tee, angle, channel or hollow steel section) including distance pieces, cleats etc confirming to Fe-410-W (Gde-E-250) quality B including welding work including dismantling wrought iron or mild steel work of any descrfiption not otherwise provided incuding two coat of synthetic enamel paint over a coat of red oxide complete all as specified.

S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strenth of 550 Mps as in roof covering /clading to wall fixed upto third floor with self taping screw Including 600mm moulding at the end of sheet where required including PCC (1:3:6) work at the edges of wall and PPGI sheet is to be fixed in wall min 2 inch by cutting the wall by cutter/any other instruments as directed by Engr-in-Charge including dismantling of AC/CGI/galvalume sheet corrugated or semicorrugated in roof covering including ridges,hips valleys flashing etc complete all as specified and directed.

Ditto all as per item No 19 here-in-before but plain sheets

Disconnecting existing tanks,setting side for repairing,cleaning and removing all scale dirt,etc and hoisting after cleaning and removing all as specified and directed etc from tanks of circulating pipes etc of capacity upto and including 500 ltrs and endrosed the word '' CLEANED ON WITH DATE''with white paint including replacement of broken/unservicable fittings such as Float Valve, Elbow.tee,socket,nipples of any size etc complete all as specified and directed.

Disconnecting existing tanks,setting side for repairing,cleaning and removing all scale dirt,etc and hoisting after cleaning and removing all as specified and directed etc from tanks of circulating pipes etc of capacity Exc 500 Ltrs and upto and including 1000 ltrs and endrosed the word '' CLEANED ON WITH DATE''with white paint including replacement of broken/unservicable fittings such as float valve ,Elbow.tee,socket,nipples of any size etc complete all as specified and directed.

S&F 15mm bore dia of tubing with screwed socket joints, medium grade galvanized steel with all necessary tube fittings and fixing complete with clips, wall hooks etc to wall and ceilings or laid in floor including necessary changing and cutting in brick/concrete surfaces and making good the disturbed surface including taking down old steel GI pipe complete all as specified and directed.

S&F 20mm bore dia of tubing with screwed socket joints, medium grade galvanized steel with all necessary tube fittings and fixing complete with clips, wall hooks etc to wall and ceilings or laid in floor including necessary changing and cutting in brick/concrete surfaces and making good the disturbed surface including taking down old steel GI pipe complete all as specified and directed.

40mm thick PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in flooring in duct Areas and any where including finishing the top surface even & smooth, without using extra cement complete all as specified and directed .

S& F in repair PVC float Balll valve ,high pressure aluminium rod & high density plasttiic ball screw for iron pipe 20mm dia (min weigt 210gms ) cement complete all as specified and directed.

S& F in repair PVC float Balll valve ,high pressure aluminium rod & high density plasttiic ball screw for iron pipe 25mm dia (min weigt 210gms ) cement complete all as specified and directed.

S & F in repair Gun metal,globe or gate valve screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore of pipe 15 mm, complete all as specified and directed.

S & F in repair Gun metal,globe or gate valve screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore of pipe 20 mm, complete all as specified and directed.

S & F , 110 mm bore, PVC (SWR) Pipes single socketed in any length with rubber ring joints , fixed to wall upto third floor complete all as specified and directed

S & F , 75 mm bore, PVC (SWR) Pipes single socketed in any length with rubber ring joints , fixed to wall upto third floor complete all as specified and directed

S & F PVC SWR Bends/Tee in any radius 110 mm bore with access door in repair complete all as specified and directed..

S & F PVC SWR Bends/Tee in any radius 75 mm bore with access door in repair all as specified and directed..

S&F PVC (SWR) vent cowl 110mm bore in repair complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm bore in repair complete all as specified and directed.

S&F 110mm dia PVC (SWR) plain bend in repair complete all as specified and directed.

S&F 75mm dia PVC (SWR) plain bend in repair complete all as specified and directed.

S&F 75mm dia PVC (SWR) junction single, (Single T) equal or unequal in repair.complete all as specified and directed.

S&F 110mm dia PVC (SWR) junction single, (Single T) equal or unequal in repair.complete all as specified and directed.

M&L for Welding in repairs exc 2.5cm but n. exc. 5 cm in length, thickness of metal to be welded exc,6mm but n.exc. 9mm, including all necessary arrangement for welding complete all as specified and directed.

M&L for Rotational moulded polyethylene water storage tank 3 layer white colour water tank, non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc including taking down existing tank complete all as specified and directed.

M&L for Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc including taking down existing tank complete all as specified and directed.

S&F Steel windows/ventilator (Box type) factory made glass/glazed shutter,and including shutter for wire mesh and Glass (glass panes and wire mesh shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills and two coat of synthetic enamel paint over a coat of red oxide primer including taking down of old windows complete all as specified and directed.

S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq m in each pane fixing upto Third Floor complete all as specified and directed .

S&F 3.00 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane fixing upto Third Floor complete all as specified and directed

S&F in Repair 5mm thick Glass Panes of any colour including with rubber gaskat and beading/Glazing clips size fixing upto Third Floor complete all as specified and directed

S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F Figured glass 3mm thick , pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F in repair, Stainless steel grade wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed.

S&F Stainless steel grade wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed.

M & L for Durastone / Endura heavy duty virtified tiles of size 300mmX300mmX 8 to 9mm thick set jointed and pointed in neat cement slurry in floors with grey cement over 15 mm thick screed bed of 1:4 cement mortar including dismantling old surface complete all as specified and directed.

S&F galvalume aluminum zinc and steel sheet mounted to frames as in chajjas/shed to wall with MS nut and bolt of 250 mm long, 12mm dia by drilling process/welding including scaffolding complete all as specified and directed.

M&L for plain cement concrete 1:3:6 Type C (40 mm gradeded stone aggregate) as mass concrete including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and as directed

M&L for rendering 15mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surface including finishing the surfaces even and smooth without using extra cement including preparation of newly plastered surface of walls and applying two coats of oil bund distemper over one coat of primer and wall care putty complete all as specified and as directed.

KHOSLA ENGINEERS BUILDERS (BID ID -3068443)

Ms Narinder Kumar Sehgal (BID ID -3068860)

M/S SWASTIKA BUILDERS (BID ID -3068515)

M/S VIJ CONSTRUCTION CO (BID ID -3068672)