Construction of two nos. of residential quarters (Twin type model) for Navigational Assistant grade II at Rameswaram DGPS station

Amount

Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 60 cm girth upto and including 120 cm girth.

Earth work excavation in trenches for foundation not exceeding 1.5M width and for shaft wall cross splits and not exceeding 10 sq.m on plan including dressing of sides and ramming of bottoms lift upto 1.5m including getting out the excavated earth soil and disposal of surplus excavated earth soil as directed within a lead of 50M including dewatering if necessary and supply of all labours, tools and plants and all other charges etc. complete.

Open timbering in case of shafts, well, foundation, cesspits manholes and the like including strutting and shoring complete (measurements to be taken of the face area timbred) Depth exceeding 1.5m but not exceeding 3.00m inclusive cost of supply of all materials, labours, tools and all other charges etc complete.

Providing and laying of plain cement concrete 1:3:6 (one cement 3 Coarse river sand/M-sand and 6 graded granite stone aggregate 20 mm nominal size of approved first quality) including mixing, laying, curing, consolidation excluding side shuttering etc., complete, supply of all materials, labours, tools & plants and all other charges etc., complete.

Laying P.C.C 1:3:6 for Foundation and Basement.

Filling, excavated earth to the sides of Foundation work etc.including watering, ramming, consolidating and dressing etc, including cost of supply of all labours, materials, tools & plants,diesel and all other charges etc.,complete.

Earth Filling Foundation and Basement with available excavated earth.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources).

Reinforced cement concrete work in beams, suspended floors, roofs having slope, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Foundation & Plinth / Footing column up to plinth level

Above plinth level/ For column, Beam

Roof Slab

Lintel, Sunshade

Centering and shuttering including strutting, propping etc. and removal of form work.

Plinth Beam,Lintel

Sunshade

Roof Slab

Supplying, cutting, bending, binding, placing in position Fe 500 grade steel reinforcement of HYSD tor steel/TMT bars of make SAIL/VIZAG Steel/RINL/TATA-TISCON/ JINDAL for R.C.C work at all heights as per drawing and as directed including supply of binding wire of approved first quality & thickness, cost of all materials, labour, tools and plants and all other charges etc. complete for all works.

Brick work with burnt clay wire cut bricks of approved first quality, size and of minimum class designation 7.5 as per I.S. 1977 in cement mortar 1:4(1 cement 4 coarse river sand/ M-sand of approved first quality) simultaneously pointing wherever required as directed including providing through bond between existing wall including cost of all materials, labour, tools, scaffolding, curing,and all other charges for foundation & plinth / in Superstructure.

Foundation & Plinth

Superstructure

Half Brick work with CM 1:3

Providing and fixing approved second class teak wood wrought frames for doors, windows & ventilators with horns and holdfast fixing in cement concrete 1:3:6 (1 cement 3 course river sand 6 stone aggregate 20mm down gauge) as per standard drawings including supply of all materials, labour, tools & plantsand all other charges etc., complete.

Providing second class teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length

Providing & fixing 16mm dia MS round bar as window guard bars

Providing and fixing approved second class teak wood , panelled/Glazed shutters of 35mm / 25mm for Doors & Windows with 12mm thick teak wood panels of approved quality as per standard drawing and as directed of including all required anodised Aluminium fittings/fixtures, brass Screws, of ISI quality supply of all materials,labours,tools & plants and all other charges etc., Complete.

35mm thick fully panelled shutter with 12mm thick second class teak wood panels

35mm thick fully panelled shutter with 12mm thick second class teak wood panels and fixed with GI sheet of 22 gauge for bathrooms

25 mm thick fully glazed/ Partially glazed shutter with 4mm(weight not less than 10kg/sqm). Thick pin head glass for windows & Ventilator with fixed glass/Glass Louvers, beeding (without frame).

25mm thick fly proof shutters country wood with teak wood beading (15mm X 15mm )with netlon mesh of approved quality.

Plastering the exposed surface of concrete faces and brick wall masonry at all heights with cement mortar 1:3 (1 cement 3 fine river sand/M-sand of approved first quality) to the required thickness of 15 mm thick in one layer including scafolding, curing, making rough the smooth surface, supply of all materials, labour, tools and plants,and all other charges etc. complete.

Inner plastering

Outer Plastering

Plastering 15mm thick with C.M 1:3 and neat cement finish with water proofing with water proofing compound for septic tank and soak pit

Syn. Enamel Paint for doors & windows, wood surface -2 coats over a coat of wood primer, after applying a coat of wooden putty.

Synthetic enamel Painting on steel surfaces, gates, guard bars etc.,- two coats over one coat of red oxide/ zinc chromate metal primer.

Applying priming coats with water thinnable cement primer on wall surface having VOC content less than 50 grams/litre of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content including supply of all labours, tools, materials and finishing etc. complete as directed by the engineer in charge

Applying two coats of wall putty with 1mm thick to make the wall smooth.(Asian/Birla/JK putty)

Painting two coats interior plastic emulsion paint with first quality of aproved manufactures on undecorated wall surface, Ceiling surface to give an even shade after thoroughly brooming the surface to remove all dirt, dust mortar, draps and other foreign matter etc., applying one coat of cement primer etc. including the cost of supply of all labours, materials, tools & plants,scaffolding and ladder,brushes, and all other charges etc., complete. Brand Asian/Berger

Painting two coats or more coat Exterior wheather paint (APEX ULTIMA) over a coat of cement primer with First quality of approved manufactures on undecorated wall surface, Ceiling surface to give an even shade including thoroughly brooming the surface to remove all dirt, dust, mortar draps and other foreign matter etc., applying one coat of cement primer including the cost of supply of all labours, materials, tools & plants,scaffolding and ladder,brushes, puttywhere ever required and all other charges etc., complete . Brand Asian/Berger

Supplying and fixing of Vitrified/Ceramic tiles flooring, Glazed tiles for walls Dadoing)(NITCO,Orient, Somany, Bell )/Cuddappa Stone fixing at Kit.Oven platform etc., of approved premium quality at all heights after spreading and levelling with cement mortar 1:4(1 cement 4 coarse sand/M-sand) and pointing with white cement of approved quality admixtured with colour pigments etc., as directed including supply of all materials, labour,tools & plants curing and all other charges etc. complete.(thickness as per manufacture's specification)

virtified Tiles Flooring 600 x 600 mm size (C:M-1:4)

Ceramic tiles flooring with 300mm x 300mm tiles

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying bricks tilesof size 230 x 230 mm at all heights of approved quality & size over sloped roof slab as water proofing course provided with cement mortar 1:3 (1 cement 3 coarse sand of approved first quality) of 12mm thick including laying, pointing with Cement mortar 1:3 (1 cement 2 coarse sand)in joints with neat finishing as directed cost including mixed with water proof compound in mortar & pointing, curing, supply of all materials, labours, tools & plants and all other charges etc, complete.

Roof Slab

Providing and fixing water closet squatting pan (Indian type W.C. pan) first quality brand (PARRYWARE/JAGUAR/ CERA/NEYCER) manufacturer, colour with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing wash basin of approved first quality brand (PARRYWARE/ JAGUAR/CERA/ NEYCER) manufacturer,colour size 550 x 400mm of size with single hole for pillar tap and fixing waste pipe with C.P. Brass coupling of size 40mm , Including of all materials, labours, tools & plants and all other charges, etc complete.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required of size of 610 x 510mm bowl depth 200 mm all nessassary fitting as directed

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes with fittings and without the base support for tank.etc complete

Providing and fixing bath room fittings of approved first quality brand/manufacturer,colour/size like Mirror,Towel rail, Soap dish tray with all necessary fixtures including supply of all materials, labours,Screws, tools and all other charges etc., complete.

Providing and fixing PTMT 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing water supply fittings( JAGUAR/CERA) with all necessary fixtures and specials of approved first quality brand/ manufacturer,colour (ISI make) as per the following items including all materials, labours, tools & plants and all other charges etc complete.

Providing and fixing C.P. brass long body bib cock 15 mm nominal bore of approved quality conforming to IS standards and weighing not less than 690 gms.

Providing and fixing C.P. brass 15 mm bib cock of approved quality conforming to IS:8931.

P/F CP Brass 15 mm dia Stopcock

P/F. C.P brass 15 mm dia Pillar cock

P/F. C.P brass 15 mm dia Angle cock

P/F C.P brass 15 mm dia 230 mm shower arm

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm dia

P/F 20mm CPVC Ball valve (Make : Ashirvad/Astral/ Supreme)

P/F 25mm CPVC Ball valve (Make : Ashirvad/Astral/ Supreme)

P/F 32mm CPVC Ball valve (Make : Ashirvad/Astral/ Supreme)

Providing and fixing water supply line in CPVC pipes including all G.I fittings like Elbow, Tee etc., fixing in walls, ceiling with necessary G.I Clamps, Screws and laying of pipes in trenches of dia varying from 20 mm to 40 mm dia as and directed. Supply of all materials, labours, tools and plants etc., Complete.

20 mm dia CPVC pipe

25mm dia CPVC Pipe

32mm dia CPVC Pipe

Providing and fixing PVC fittings of heavy duty, approved first quality and brand (FINOLEX/ PRINCE/ ASHIRVAD/ORIPLAST/SUPREME) accessories like elbow, Tee, Bend, Reducers etc., Including Supply of all materials, labours, tools and plants and all other charges etc., complete.

Providing & laying 110mm dia PVC pipes of heavy type 6 Kgf/Sq.cm of approved brand and manufactures for rain water/SWR pipe line including fixing necessary clamps, screws and fittings, included jointing of pipes & fittings with PVC solvent etc. including walling, making good the wall, ceiling and floor including cost of all materials, Tools & Plants, labour charges etc. complete as directed by the engineer in charge.

P/F.110 mm dia PVC Elbow

P/F.110mm dia PVC TEE

P/F.110 mm dia PVC Bend / offset

P/F 110 mm dia PVC Floor Trap with screen

P/F 110 mm dia PVC Slotted vent cowl

P/F. PVC 110 mm dia door bend

P/F. PVC Door bend 63 mm dia

P/F. PVC 63 mm dia plain bend

P&F C.P grating 110 mm dia

Providing and laying Polished Granite stone slabs of approved quality and colour of Black, Cherry/Ruby Red or equivalent in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing, nosing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

M Rajagopal

M.GANESAN