Loading…
Loading…
Tender Value
₹1 L
Closing Date
28 Sept 2026, 6:00 pm
GE Chandigarh
HQ N Area, GE Chandigarh office
Repair/Servicing of Vehicle BA No 21B-136564X MARUTI EECO, Veh BA No- 14B-113630M MARUTI GYPSY, BA No- 16B-121723H MARUTI OMNI
2026_MES_789980_1
GE/CHD/JOB ORDER-07/2026-27
Limited
Mechanical Maintenance Services
Lump-sum
30 days
Chandigarh
As per Tender Documents
3 documents required · 3 mandatory
₹0
Exempted
18 Sept 2026
18 Sept 2026
30 Sept 2026
18 Sept 2026
28 Sept 2026
18 Sept 2026
18 Sept 2026 - 28 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | MARUTI EECO 21B-136564X
(a) M&L for Perodical servicing of veh Maruti Ecco, including cleaning & complete washing and as specifed and directed by Engr-in- Charge. 01 Job
(b) Air filter 01 Nos
(c) Oil filter 01 Nos
(d) Fuel filter 01 Nos
(e) Engine oil 4.2 Ltr
(f) Gear oil 03 Ltr
(g) Brake oil 0.5 Ltr
(h) Coolant 2.5 Ltr
(j) Wheel Alignment & wheel balancing 01 Nos
(k) M&L AC servicing, evaporator cooling coil cleaning/replacement, expansion valve, and fresh refrigerant gas refill. 01 Job
(l) M&L for computerised calibration of electric wiring including rectification of defects 01 Job
(m) Set of 4 molded rubber mud flaps for front and rear wheels. 01 Set
(n) Replace outer and inner rubber weatherstrip door gaskets for noise insulation and leak protection. 01 Set
(o) De-carbonize catalytic converter, replace exhaust manifold gasket`01 Job
(p) Replacement of spark plugs 04 Nos
Disconnecting and removing from existing foundation of squirrel cage induction motor 100 HP,2800 RPM,3 phase,50 Hz incl pump set at stage-II,opening the motor,cutting and removing the burnt winding and cleaning of slots and rewinding with super enamelled copper wire as per existing Nos of turns with suitable size incl replacement of terminal plates connecting,rotating starter winding,steel lamination bearing shaft etc. as per existing of this one and refixing at existing foundation all as directed.
Note: Loading/unloading incl transportation for carrying of this item from installation to workshop and back is included in this quoted rate.
MOTOR REWINDING SM No. 429/1483/EM/24. Stage II | 1 | EACH JOB | 75 | ₹75 |
| 2 | MARUTI GYPSY 14B-113630M
(a) M&L for Perodical servicing of veh Maruti Gypsy, including cleaning & complete washing and as specifed and directed by Engr-in- Charge. 01 Job
(b) Air filter 01 Nos
(c) Oil filter 01 Nos
(d) Fuel filter 01 Nos
(e) Engine oil 4.2 Ltr
(f) Gear oil 01 Ltr
(g) Brake oil 01 Ltr
(h) M&L Radiator flushing and filling fresh long-life coolant. 01 Job
(j) Set of 4 molded rubber mud flaps for front and rear wheels. 01 Set
(k) M&L for Wiper motor arm set 01 Set
(l) M&L for Wiper Blades 01 Set
(m) Wheel Alignment & wheel balancing including weight addition and tyre rotation 01 Nos
(n) M&L for Replacement of universal (U) Joints, center rubber support bearing, and balance the main propeller shaft. 01 Job
(o)M&L for replacement of fuse box assembly 01 Set | 1 | EACH JOB | 75 | ₹75 |
| 3 | Maruti Omni Veh BA No- 16B-121723H
(a) M&L for Perodical servicing of veh Maruti Omni, including cleaning & complete washing and as specifed and directed by Engr-in- Charge which include the Activity complete all as specified in item as above. 01 Job
(b) Air filter 01 Nos
(c) Oil filter 01 Nos
(d) Fuel filter 01 Nos
(e) Engine oil 2.5 Ltr
(f) Brake oil 0.5 Ltr
(g) Coolant 2.5Ltr
(h)M&L for synchronizer rings check, replacement of oil seals, gear oil flush and fill fresh gear oil 01 Job
(k) M& L for replacement of Timing belt kit, alternator belt, water pump belt 01 Job
(l) M&L for front lower arms, tie-rod ends, kingpin kit 01 Job
(m) M&L for Steering box overhaul, rack boots, column adjustment
01 Job
(n) M&L for servicing/repair of ignition system replacement of spark plugs, cleaning of ignition coils, HT leads, distributor check
01 Job
(o) M&L for Servicing of carbon brush, armature repair 01 Job
(p) Wheel Alignment & wheel balancing 01 Job
Disconnecting and removing from existing foundation of squirrel cage induction motor 100 HP,2800 RPM,3 phase,50 Hz incl pump set at stage-II,opening the motor,cutting and removing the burnt winding and cleaning of slots and rewinding with super enamelled copper wire as per existing Nos of turns with suitable size incl replacement of terminal plates connecting,rotating starter winding,steel lamination bearing shaft etc. as per existing of this one and refixing at existing foundation all as directed.
Note: Loading/unloading incl transportation for carrying of this item from installation to workshop and back is included in this quoted rate.
MOTOR REWINDING SM No. 429/1483/EM/24. Stage II | 1 | EACH JOB | 75 | ₹75 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.10 MB
TC.pdf
Tender Documents • 0.07 MB
BOQ_885569.xls
BOQ • 0.60 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .