Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹13.7 LAccepted-AOC | 1 | Accepted-AOC L1 |
Tender Value
₹14.0 L
EMD Value
₹28,100
Closing Date
27 May 2021, 5:00 pmClosed
EXECUTIVE ENGINEER
WSS DIVISION BARNALA
Providing laying , Stringing , Jointing, cutting and testing of PVC Pipes, excavation for pipe line and all other works as per DNIT
2021_WB_65464_1
WSSD/Barnala/2021-22/13
Open Tender
Civil Works - Water Works
Item Rate
90 days
Wazid Ke Khurd
Please Refer Tender Documents
5 documents required · 5 mandatory
₹1
₹28,100
13 Jul 2021
17 May 2021
28 May 2021
17 May 2021
27 May 2021
17 May 2021
Amount
Providing, Stringing out PVC pipes ISI Marked as per ISI-4985 (ISI marked with the prior approval Engineer-in-charge) casting along the Trenches and laying the same in Trenches To correct alignment and gradients, cutting. Jointing and testing including excavation & back filling complete as per specifications for more than 3 mtr street width
(CSR item 28.13 (B)
PVC pipe 63mm o/d 6kg/sqcm
PVC pipe 90 mm o/d 6kg/sqcm
PVC pipe 110 mm o/d 6kg/sqcm
Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting.
Dismantling of flexible pavements thickness above 50mm by mechanical means and disposal of dismantled materials up to a lead of 1000 meters, stacking serviceable and unserviceable materials separately as per technical clause 202 of MORT&H specifications
PVC pipe 90 mm o/d
Hand boring Horizontly for crossing of pipe under road or any other obstacle by using Auger/Bocki method including excavation , stringing and jointing of pipe up to 160 mm complete
as per CSR item 28.71
Connection with existing PVC/AC pipe (All Dia of Pipe) with PVC Pipe including cost of PVC tee /PVC saddle piece/D Joints and earth work in excavation & back filling complete in all respect as per analysis A-20
Providing water connection to house hold up to wall with providing, laying jointing, testing GI pipe lines 15mm i/d=2.50 mtr B- Class as per CSR 28.36 (A),( Above GL), Prov. & fixing MDPE pipe 20 mm i/d with specials 2.00 Mtr (Below GL) including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with c.i bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete connection as per site condition.
Repair of water connection to house hold upto wall with providing, laying jointing, testing GI pipe lines 15mm i/d=2.50 mtr B- Class as per CSR 28.36 (A),( Above GL), Prov. & fixing MDPE pipe 20 mm i/d with specials 2.00 Mtr (Below GL) including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with c.i bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete connection as per site condition.
Providing & Installing Testing & Commissioning of One No. Electrically driven Submersible Pumping set of reputed Make capable of delivering 495 LPM against a head of 81.00 mtr (15.00 BHP) along with electric panel board consisting of electric appliances such as automatic Star Delta Push Button or oil immersed Starter, Main Switch, VM, Ampere Meter, ELCB, Shunt Capacitor, Single Phase preventer, Indicating Lamps, Kit-Kat etc. including M.S. Column Pipe of suitable size 80 mm =50 mtr (in 3 mtr lengths each with flanges , screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable 4.00 mm2 =100 mtr (reputed make) complete in all respects as per standard Specifications. (Note:Old machinery Including Submerisble cable accerories, fitting and control panel to deposited in custidy of department and material shall be taken in MAS with proper record)
Providing, installing, testing & commissioning one no. Electrically actuated, diaphragm operated, Metering system, chemical dosing Chlorinator, suitable for delivering 0.5 to 0.6 litres of bleching powder solution/ sodium hypo solution per hour under maximum delivering pressure upto 7 kg cm^2 and suction lift not less than 1.5m as per DWSS standard Specification.
O & M for 3 Month
Provision of Bleaching Powder Solution/Sodium Hypo Solution complete in all Respects
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .