REPAIR TO ROOF TREATMENT, FLOORING, JOINERY AND OTHER MISC WORK INCLUDING INTERNAL ELECTRIFICATION TO OTM AND MD ACCN IN ZONE A2 AREA UNDER GE (WEST) MATHURA

Amount

Taking down chowkhats with shutter (without taking off shutters from the frame) area n.exc. 1.50 Sqm each complete all as specified and directed.

Taking down chowkhats with shutter (without taking off shutters from the frame) area exc. 1.50 Sqm but n.exc 4 sqm each complete all as specified and directed.

Taking down shutter only of any description exc 1 sqm but n. exc 2 sqm each complete all as specified and directed.

S&F Pressed steel frame made out of MS Sheet 1.25mm thick for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. Note:- During fixing of chowkhat, surface shall be make good in plumb with existing finishies like cement plaster simlar wall tiles, floor tiles etc as per site requirement.

S&F Pressed steel frame made out of MS Sheet 1.25mm thick for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. Note:- During fixing of chowkhat, surface shall be make good in plumb with existing finishies like cement plaster simlar wall tiles, floor tiles etc as per site requirement.

M&L for PCC (1:3:6) type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and as directed.

S&F 35mm thick plain framed panelled door shutter, factory made (any number of panels) of 2nd class hard wood with lock rail and panels of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces including 2nd class hard wood kail beading 20mm wide tapering from 10mm to 5 mm on one side of shutter & fitted to chowkhats. The size of rail and style shall be as per IS –1003 (Part-I) (wood shall be kiln seasoned and chemically pressure treated) complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutters 35 mm thick (stile:), with particle board core and 2,4 or 6 raised panel design with 5mm thick Moulded colour PVC Sheet on the front Face & 5mm Plain colour PVC sheet on back face, fixing in frame at site complete specification & drawing as per SSR complete all as specified and directed.

S&F 35mm thick factory made glazed and skeleton shutters of 2nd class HW with partially panel shutter open rebated and prepared to receive glass / gauze etc edges or framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc as specified in SSR pt-1 section 8.24 (a) complete all as specified and directed.

S&F 35mm thick factory made glazed and skeleton shutters of 2nd class HW with partially panel shutter open rebated and prepared to receive glass / gauze etc edges or framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc as specified in SSR Pt-1 section 8.24 (a) complete all as specified and directed.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fixed in opening as per specification and drg in SSR Part II 2020 complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with particle board core and 2,4 or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, fixing in frame at site complete specification & drawing as per SSR complete all as specified and directed.

S&F 300mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L Preparing new wooden surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 100mm long stainless steel Butt hinges fixed complete all as specified and directed.

S&F 150mm stainless steel barrel tower bolts with bright bolt and fixed complete all as specified and directed.

S&F 150mm long stainless steel handles, oval type complete all as specified and directed.

S&F in repair 300mm stainless steel sliding door bolts, bolt type with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 100mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F Factory made steel windows with side hung shutters including box type hinges with steel handle & steel peg stay complete without glazing bars, dovetailed or welded and also including painting the exposed steel surfaces with one shop coat of Zinc-Chromate primer complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F framed work such as grill gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters walk ways railing frame work of ceiling etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for preparation of new steel surface of any description not otherwise described exc 10cm width or girth and applying two coats of synthetic enamels paints over a coat of red oxide primer complete all as specified & directed.

S&F MS Angle, flat iron ,round bars such as in door frame, ladders work to fix in PCC grouting, welding etc confirming to Fe-290 Gde E-165 complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50 sq.m. in each pane complete all as specified and directed.

Demolition of brick work or stone/boulders masonary, built in cement mortor including all quoins, arches pillars, etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' old size brick straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM in (1:4) finished fair and even complete all as specified and directed.

M&L for Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished surface fair and even complete all as specified and as directed

M&L for preparation of new plastered surfaces and applying two coats of cement based paint over one coat of cement primer on walls complete all as specified and directed.

M&L preparation of new plastered surfaces and applying two coats of OBD over one coat of primer on walls complete all as specified and directed.

S&F powder coated aluminium anodised door frame and shutter of section as under and providing 5.50mm thick tinted gass with and including each shutter to be provided with aluminium fittings such as aluminum butt hinges 100mm- 03 Nos, Aluminum handles 150mm- 02 Nos, Aluminium tower bolts 150mm- 02 Nos, rubber neopran beadding, glazing clips and one lock four lever with duplicate keys in each opening and 01 No hydraluic door spring etc including taking down old aluminium shutter with chowkhat complete all as specified and directed. (a) Outer Frame - 100x50x1.20mm (b) Shutter - 90x50x1.20mm (c) Top, middle & Bottom rail 90x50x1.20mm etc

M&L for in repair to aluminium door/window of any size/any description , taking off from present position and refixing in the same position after tightening , easing/change the section as required , including fitting the rubber packing aluminium snap beading resetting floor/hydraulic door closer/spring etc complete all as specified and directed.

S&F in repair 18mm thick Alstone hybrid water proofing board in cupboard shutter with decorative on both side design fixed by drilling screws complete all as specified and as directed.

S&F continous piano hinges mild steel bright finish or electrogalvanised of 30mm width complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 15mm thick screed bed in cement mortar (1:6) for laying floor finishes. complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surface 450x300x7-8mm thick set and jointed in neat cement slurry and pointed in coloured cement to match fixed over and including 15mm thick rendering on brick work/concrete surfaces in cement mortar (1:4) for skirting /dado finishes complete all as specified and as directed.

M&L for coloured Non-skid Ceramic tiles of size 8 mm thick (square/rectangular) area of each tile exceed 0.18 sqm but n.exc 0.38 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in cement mortar (1:6) for laying floor finsihes complete all as specified and directed.

All as per item No 41.00 (here-in-before) abvoe but as in skirting over 10mm thick backing coat in CM (1:3) complete all as specified and directed.

S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repair 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F PVC (SWR) bend of any radius 110mm bore complete all as specified and directed.

S&F PVC (SWR) junction single, ( Single T) equal or unequal 110 mm bore complete all as specified and directed.

S&F in repair PVC (SWR) junction double, ( double T) equal or unequal 110 mm bore complete all as specified and directed.

M&L stack clamps made out of 50mm by 5mm flat iron including bolts and nuts and securing ends of stays to wall or roof for 100mm bore pipe complete all as specified & directed.

M&L stack clamps made out of 50mm by 5mm flat iron including bolts and nuts and securing ends of stays to wall or roof for 75mm bore pipe complete all as specified & directed.

Taking up or down steel tubing and connection of 15mm bore pipe complete all as specified and directed.

Taking up or down steel tubing and connection of 20mm bore pipe complete all as specified and directed.

S&F GI tubes medium grade, with all fittings and fixed complete to wall and ceiling/floor 15mm bore complete all as specified and directed.

S&F GI tubes medium grade, with all fittings and fixed complete to wall and ceiling/floor 20mm bore complete all as specified and directed.

Dismantling of ceiling boards of any type and any thickness including cover fillets and timber frame work complete all as specified and directed.

S&F 605X605 mm size of grid GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended form soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section ( not exc 1.2 m length ) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre incl providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturer's instructions.

M&L for rendering dubbing coat over irregular surfaces of chajjas roof projections /ceiling /facia etc average 15mm thick in CM (1:4) over cement slurry coat @ 3Kg/Sqm making the surface even followed by 5mm thick rendering in CM (1:3) furnished even & smooth including making of drip course as required complete including roughening surface of old concrete by picking sweeping clean and washing with water complete all as specified and directed.

Wornout existing treatment from sunken portion of WC /Bath/Kitchen/Passage area n exc 2.5 Sqm each including taking down floor tiles, plaster, lime/cement concrete, WC trap complete empty of existing sunk complete all as specified and directed. (Taking down of plumbing & sanitary fixing & fixture shall be measured under relevant items).

M&L for Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sunken part of slab complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces finished fair and even in CM (1:4) mixed with liquid water proofing compound complete all as specified and directed. Note : Liquid WPC shall be measured and paid sapertaly.

Supply only liquid water proofing compound complete all as specified and as directed.

S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC flush pipe complete including jointing to socket of flushing rim, complete all as specified and directed.

M&L for applying a coat of two component elastomeric acrylic polymer modified cementitious water proofing coating, having properties of 80 % elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and sprinkle sand at 10-15 gram per sqft for better grip with plaster complete all as specified and directed.

S&F GI tubes light grade, laid on sunken floor as on spout pipe 50mm bore complete all as specified and directed.

B.M Enterprises

SHRI RADHAYSHYAM JHA

M/s Hoti Lal Contractor

CHOPRA ENTERPRISES

Deepak Saxena