Special repairs to roof of OPD and male ward of section hospital inside Kalina Military Camp under GE North Mumbai

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and as directed

Dismantling of framed timber scantlings 40 sqcm and over in section, in any position all as specified and as directed by Engineer-in-Charge.

Material and labour for rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantries, rails, and fastenings and heavy bracket framing, (beam, tee, angle, channels or flat sections) including notching, drilling, fitting, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts) conforming to Fe 410 W Gde E- 250, Quality B complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets

Supply and fix Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge. Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets

Material and labour for preparing new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red zinc chrome primer complete all as specified and as directed by Engineer-in-Charge. Make : Asian paints/ Nerolac paints/Berger paints/ Shalimar paints/ Dulux

Material and labour for plain cement concrete 1:3:6, type C1 using 20mm graded stone aggregate as in fixing hold fasts, bed blocks, coping, filling inside of pressed steel frame etc complete all as specified and as directed by Engineer-in-Charge.

Dismantling of false ceiling / wall cladding sheets of any description including cover fillets etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 5 mm (+/- 0.25 mm) thick solid PVC insulation panels of density 600kg per Cbm (water proof) suitably placed in flase ceiling grid made of Aluminium/ G.I./M/S as per specification and drawing fixing in 600mm x 600mm of anodised aluminium snap grid frame work for false ceiling (Aluminium grid to be measured seperatly)

Material and labour for anodised aluminium snap grid frame work for false ceiling conforming to IS 733, IS 737 and IS 1285 with necessary main tee 35.00 x 23.50 x 1.50mm, cross tee and wall angle of size 23.50 x 23.50 x 1.5 mm with 605 x 605 mm grid system, framwork to be supported by hangers 6mm dia GI wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI glat 40 x 3mm size 60mm long and expansion hold fastners12.5mm dia , 40mm long etc complete all as specified and as directed by Engineer-in-Charge. Make Aluminium section shall be of Jindal / Hindalco / Indalco

Material and labour for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 mtr mean radius with old size bricks and built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge

Material and labour for 10mm thick rendering with cement mortar 1:6 on fair faces of brick or concrete surfaces and finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge

Material and labour for 15mm thick rendering with cement mortar 1:4 mixed with water proofing compound (WPC) all as per manufacturers instructions brick or concrete surfaces and finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge Note: WPC will be measured and paid separately.

Material and labour for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer over a coat of 1.5mm thick wall care putty etc complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints

M&L for preparing newly plastered walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) all as specified and directed by Engineer in Charge.

Supply only integral water proofing compound ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Pidilite Industries Ltd, Taloja /Super Aquacem (India) Ltd /FOSROC/Siko/Dr Fixit

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials out side MD land in case of Credit and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Material and labour for Point wiring for complete with PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 1.5sqmm (nominal area) drawn through and including non metallic PVC casing / capping (ISI marked, not lessthan 25mm wide) and accessories on surface of wall/roof with sunken type pressed steel/welded terminal boxes made out of 1.6mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor 1.5sqmm as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed by Engineer-in-Charge for the following. Note: Serviceable switch / socket outlet shall be reused. Make of Cable-Plaza, Finolex, Havells, Polycab Make of PVC Casing Capping-Anchor, Modi, Pressfit, Precision, Astral, Panasonic Anchor, Polycab, Presto Plast, Supreme

One light / Fan / Exhaust fan / bell point controlled by one, one way switch

One 3 pin 5/6 Amps switch socket outlet combination point on independent board.

One 3 pin 5/6 Amps switch socket combination point on the same board with other switches controlled by one switch.

All as per item No 19 described here-in-before but for point wiring with 2.5 sqmm single core standard copper conductor and one run of 2.5 sqmm copper conductor, standard for earth wire for one switch socket outlet point 15/16 amps on the independent board.

Taking down tube light fittings any capacity in serviceable condition and refixing the same after completing the civil works all as specified and as directed by Engineer-in-Charge.

Taking down electric bell (Ding -dong type) in serviceable condition and refixing the same after completing the civil works all as specified and as directed by Engineer-in-Charge.

Supply and fix Switch Piano, flush type, single pole, one way, 5/6 Amps, 240 volts, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T / Havells

Supply and fix Ceiling rose, surface type Bakelite, three terminal 65x32mm, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix switch socket outlet, combination 5 Pin 5Amps / 3 Pin 6Amps, flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix switch socket outlet, combination 5 in 1, 3 Pin, 5/15Amps, flush type 240 volts, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Material and labour for Submain wiring complete with and including 2 runs of 6.0sqmm, single core FRLS, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including PVC conduit, medium grade of size 25mm including accessories such as Tees, Elbows, junction box, reducers etc as required and fixed on walls and one run of 6.0sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Note :- (i) Two runs of 6.0 sqmm PVC insulated cable and one run of 6.0 sqmm cable and one run of PVC conduit shall be measured as one unit length. Make:Plaza/Finolex/Anchor/Havells/Nicco/Polycab/RPG

Material and labour for Submain wiring complete with and including 2 runs of 4.0sqmm, single core FRLS, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including PVC conduit, medium grade of size 25mm including accessories such as Tees, Elbows, junction box, reducers etc as required and fixed on walls and one run of 4.0sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Note :- (i) Two runs of 4.0 sqmm PVC insulated cable and one run of 4.0 sqmm cable and one run of PVC conduit shall be measured as one unit length. Make:Plaza/Finolex/Anchor/Havells/Nicco/Polycab/RPG

Taking down Ceiling Fan of any Sweep and Make by disconnecting Electric Connection, dismantling Blades, Down Rod and removing Ceilling Fan to MES STORE YARD OF AGE E/M (N) for Checking complete all as specified and as directed.

Hanging only Ceiling Fan of any Sweep and make and connecting up electric connection from Ceiling Rose/Connector to Fan, complete all as specified and as directed. Note Flexible wire is provided under respective item.

Dismantling of disturbed portion of Point wiring (Existing conduit/casing, capping and cables for wiring only) and keep in safe aside and reflxing the same after necessary Ceiling/ roof work in its position with provisionof necessary new casing caping/PVC conduit and screws as required and making good disturbed surfaces all as directed by Engr in Charge

Supply and fix LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size including taking down existing light fittings etc complete all as specified and as directed by Engineer-in-Charge. Make : Phillips Cat No RC380B LED36S -6500 G4 L60 W60 PSU OD or equivalent of Havells / Crompton Greaves.

Note: Deduct Credit for demolished / dismantled material of Rs. (-) 62,473.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'

S.N Enterprises

Vishal Builders

joshua construction

PANKAJ AND BROTHERS