Estimate for providing and laying pipeline ahead at different outlets of Chheharta Section

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. Depth upto 1.5 mtr.

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.

First class brick masonary laid in cement sand mortar 1.5 in foundation and plinth including supply recarriage of bricks cement

10mm thick cement plaster 1.3 on sides walls

10mm thick cement plaster 1:3 on bed and top.

Reinforced cement concrete 1:2:4 hand mixed excluding steel reinforcement

Cement Conc.1:2:4 including supply, carriage & with stone ballast or shingle

Cement concrete 1:4:8 with brick ballast 40mm gauge mechanical means

Wrought Iron and mild steel ladders, framed grills, grating etc. complete fixed in position in D-tank

Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturer‘s permanent identification mark to be visible even after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggragate) complete as per design

Providing and fixing of Alfa Alfa Valve fitted on riser pipe to act as Nakka (D regulators) (450 mm)

Providing and fixing of Alfa Alfa Valve fitted on riser pipe to act as Nakka (D regulators) (400 mm)

Providing and fixing of Alfa Alfa Valve fitted on riser pipe to act as Nakka (D regulators) (350 mm)

Providing and fixing of Alfa Alfa Valve fitted on riser pipe to act as Nakka (D regulators) (300 mm)

Supply of Precast Concrete NP-2 Plain End Pipes with collar with reinforcement duly ISI marked as per IS 458:2003 (i) 150 mm Dia

Supply of Precast Concrete NP-2 Plain End Pipes with collar with reinforcement duly ISI marked as per IS 458:2003 (iv) 300 mm Dia

Supply of Precast Concrete NP-2 Plain End Pipes with collar with reinforcement duly ISI marked as per IS 458:2003 (v) 350 mm Dia

Supply of Precast Concrete NP-2 Plain End Pipes with collar with reinforcement duly ISI marked as per IS 458:2003 (vi) 400 mm Dia

Supply of Precast Concrete NP-2 Plain End Pipes with collar with reinforcement duly ISI marked as per IS 458:2003 (vii) 450 mm Dia

Laying R.C.C. pipes for outlets ND CULVERTS INCLUDING JOINING ENDS AND FIXING COLLAR WITH CEMENT MORTAR 1:2 Complete in all respect : (taking 2.5 mtr length of pipe) a Upto 150 mm inside diameter

Laying R.C.C. pipes for outlets ND CULVERTS INCLUDING JOINING ENDS AND FIXING COLLAR WITH CEMENT MORTAR 1:2 Complete in all respect : (taking 2.5 mtr length of pipe) d 300 mm diameter

Laying R.C.C. pipes for outlets AND CULVERTS INCLUDING JOINING ENDS AND FIXING COLLAR WITH CEMENT MORTAR 1:2 Complete in all respect : (taking 2.5 mtr length of pipe) e 350 mm diameter.

Laying R.C.C. pipes for outlets ND CULVERTS INCLUDING JOINING ENDS AND FIXING COLLAR WITH CEMENT MORTAR 1:2 Complete in all respect : (taking 2.5 mtr length of pipe) f 400 mm diameter

Laying R.C.C. pipes for outlets ND CULVERTS INCLUDING JOINING ENDS AND FIXING COLLAR WITH CEMENT MORTAR 1:2 Complete in all respect : (taking 2.5 mtr length of pipe) g 450 mm diameter

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Any other Item

A TO Z CONSTRUCTION CO