Special Repair work of inspection building of PWD located in Aligarh district

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge : All kinds of soil. As per DSR-2023 (CH-2, Sl. 2.8.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). As per DSR-2023 (CH-4, Sl. 4.1.8) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. As per DSR-2023 (CH-13, Sl. 13.88) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. As per DSR-2023 (CH-15, Sl. 15.56) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). As per DSR-2023 (CH-4, Sl. 4.1.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand). As per DSR-2023 (CH-6, Sl. 6.4.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand). As per DSR-2023 (CH-13, Sl. 13.1.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. As per DSR-2023 (CH-13, Sl. 13.26) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm. As per DSR-2023 (CH-11, Sl. 11.41.6) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and fixing 15 mm thick false ceiling tiles at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level on the existing frame work consisting of T-sections and Lsections suitably fixed according to tile size as per direction of Engineer-in-charge. As per DSR-2023 (CH-26, Sl. 26.25) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and fixing in position factory made non asbestos fibre reinforced aerated cement sandwich wallfrofloor light weight solid core panels made of light weight cement concrete core composed of OPC cement, pulverized flyash, quick lime, cotton pulp & Gypsum in mortar state mixed with aeration agent in a preset mould. The outer face on both sides of the panels will be non asbestos fibre cement board confirming to 1S :14862:2000. These solid wall panels are installed using Galvanized iron steel tracks/C channel of 1 mm thick of required sizes as recommended by manufacturer's and fixed to floor and RCC soffit in plumb to each other with steel screw/ fasteners. The panel shall be fixed vertically with tongue & groove joint with cement based polymer modified jointing compound. The exposed surface finished with fibre mesh/glass fibre tape with polymer based jointing compound having superior flexibility. Panels should be used as floor & roofing with additional structural support, steel or RCC depending upon the design. All the operation shall be completed in all respect as per drawings, Manufacturers specifications and under the overall direction of Engineer-in-Charge (Cost of all the material is included except “tracks/C channel” which will be paid separately). Non load bearing panels 50 mm thick of required size (minimum 4 mm thick fibre cement board Type B, Category Ill as per 1S: 14862:2000 on both faces). As per DSR-2023 (CH-26, Sl. 26.50.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and fixing plain jaffri door and window shutters including bright or/and black enamelled M.S. butt hinges with necessary screws 35x10 mm laths placed 35 mm apart (frames to be paid separately), including fixing 50x12 mm beading complete with : 14.27.1 Second class teak wood DSR-2023 (Ch-14 Sl No. 14.27.1). As per DSR-2023 (CH-26, Sl. 26.25) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams! Litre. As per DSR-2023 (CH-13, Sl. 13.85.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 Itr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sgm. As per DSR-2023 (CH-13, Sl. 13.45.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 Itr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm). As per DSR-2023 (CH-13, Sl. 13.46.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqgm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D- 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick. As per DSR-2023 (CH-14, Sl. 14.90.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. As per DSR-2023 (CH-14, Sl. 14.92) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. As per DSR-2023 (CH-11, Sl.-11.3.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall. 32 mm dia nominal bore. As per DSR-2023 (CH-18, Sl.-18.10.4) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to 1S:8931. 15 mm nominal bore. As per DSR-2023 (CH-18, Sl.-18.52.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to |S standards and weighing not less than 810 gms. 15 mm nominal bore. As per DSR-2023 (CH-18, Sl.- 18.50.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per 18:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board. 510x1040 mm bowl depth 250 mm. As per DSR-2023 (CH-17, Sl.- 17.10.1.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length. 15 mm nominal bore. As per DSR-2023 (CH-18, Sl.- 18.21.2.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. As per DSR-2023 (CH-17, Sl.- 17.7.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. As per DSR-2023 (CH-17, Sl.- 17.31) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall. 15 mm dia nominal bore. As per DSR-2023 (CH-18, Sl.- 18.10.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 10 litre (full flush) capacity-white. As per DSR-2023 (CH-17, Sl.- 17.19.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work. 25 mm dia nominal bore. As per DSR-2023 (CH-18, Sl- 18.12.3) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “8S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material including malba, all complete as per the direction of Engineer-in charge. Long pattern W.C Pan of size 580x440 mm. As per DSR-2023 (CH-14, Sl- 14.80.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “8S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material including malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm. As per DSR-2023 (CH-14, Sl- 14.80.2) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. As per DSR-2023 (CH-17, Sl- 17.73.2) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal dia. As per DSR-2023 (CH-17, Sl- 17.22B (a)) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms. As per DSR-2023 (CH-18, Sl- 18.65) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-lll) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-lll) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. As per DSR-2023 (CH-19, Sl- 19.7.1.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). As per DSR-2023 (CH-14, Sl- 14.5.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and 1S: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion. A. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). As per DSR-2023 (CH-21, Sl- 21.1.1.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and 1S: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion.B. Powder coated aluminium (minimum thickness of powder coating 50 micron) . As per DSR-2023 (CH-21, Sl- 21.1.1.2) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sgm). As per DSR-2023 (CH-21, Sl- 21.3.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Please Enable Macros to View BoQ information