ACR at Boys Higher Secondary School Zadibal

Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width as well as 10 Sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed by Engineer-in-Charge. All kinds of soils

Providing and laying of dry stone soling duly hand packed including all carriages loading unloading complete job before laying of mud mate in trenches incl. all carriages of material involved & head load.

Filing ovaltabile excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m

Providing and laying in position cement concrete of specified grade excl, the cost of centering and shuttering: 1:4:8 (1 cement 4: coarse sand 8 graded stone crushed agg.40mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering. shuttering, finishing and reinforcement. All works upto plinth level, 1:1%:3 (1 cement: 1% coarse sand: 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. AB work upto plinth level with: 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 150, landings, balconies, shelnes, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases upto floor V level excluding cost of centering, shuttering, finishing and reinforcement with (M-20 Mix) 1:1.5:3 (1 Cement: 1.5 Coarse Sand: 3 graded stone aggregate 20mm nominal size-crushed

Centring and shuttering including strutting proping and removal of form work for foundations, footings, bases of columns etc for mass concrete.Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbis and steps etc.

Suspended floors, roofs, landings, balconies and access platforms.

Lintel, beams, plinth beams, girders, bressumers and cantilevers

Reinforcement for RCC works including straightening cutting bending placing in position and binding all complete (Thermomechanically Trested Bars) Inci, carraige and head load.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 (1 cement: 6 coarse sand)

Providing and fixing of colour profite high rib G.S Sheet roofing incl vertical curved surface fixed with polymer coated Jor L hooks, bolts and nuts 8mm dia with bitumen Gl limpet washers with Gl limpet washers filled with white lead and incl cost of approved steel primer and two coats of paint on overlapping of sheets complete 50 mm thick zinc coated not less

Structural steel welded in built up sections, trusses applying a priming coal of approved steel primer a and frame work, soffits eaves thick etc including all job complete

12mm thick ck cement plaster ter oat the rough ugh side of single or half brick walls of mix 1:6 (1 cement:6 coarse sand).

Providing ng and applying ng white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @3.84 kg/10sqm)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 15:15622 of approved make, in all colours and shades, laid on 20mm thick cament mortar 1:4 (1 cement:4 coarse sand) including grouting the joints with white cement and matching pigmentsetc. complete(Size of tile 600x600 mm).

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including. rubbing, curing and polishing etc, all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.

Providing & fixing 35mm thk 151 marked Flush door shutters non decorative type solid core of block board construction with frame of first class hard wood all around, 20mm thick & well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces including bright finished ISI marked butt hinges with necessary screws.

Providing and fixing wire gauze shutters using galvanized M.S. wie gauze of average width for aperture 1,4 min in both directions with wire of dia. 0,63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge:

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clersstory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured),Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 4 mm thick glass pane (weighing not less than 10 kg/sqm)

Applying priming coat on new wood and wood based surface with ready mixed wood primer

Painting with synthetic enamel paint of approved brand and manufacture of required shade and colour to give smooth finish with two or more coats on new wood and based surfaces

Providing /fixing 25 mm dia contute pipes for electric fittingsincludng embedding all

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding grinding, buffing. polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Carraige of Materials (Avg. Lead of 15 Kms) Sand

Carraige of Materials (Avg. Lead of 15 Kms) Aggregate

Carraige of Materials (Avg. Lead of 15 Kms) Bricks