Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.6 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹46.9 L+₹4.9 L (11.8%)Rejected-Finance 1 206 SHOP NO 71 MANDIR MARKET SADAR BAZAR DELHI CANTT 110010 | DELHI CANTT | NEW DELHI | DELHI | 110010 | L2 | Rejected-Finance BEING OTHER THAN LOWEST |
Tender Value
₹50.0 L
EMD Value
₹99,900
Closing Date
3 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
CERTAIN B/R MAINTENANCE AND PERIODICAL WORKS OF MD/OTM ACCN AND TO CENTRAL AMENITIES AT MALL ROAD, POLO ROAD, PARADE ROAD, URBAN VILLAGE AND CERTAIN UNITS IN THE AOR OF AGE B/R-III UNDER GE (EAST) DELHI CANTT-10
2023_MES_573566_1
GE/DE-76/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (EAST) DELHI CANTT-10
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹99,900
Yes
13 Mar 2023
6 Jan 2023
6 Feb 2023
6 Jan 2023
3 Feb 2023
20 Jan 2023
Amount
M & L for brick work in CM 1:6 using Sub class "B" bricks straight or curved on plan exc. 6m mean radius including demolition of existing brick/block masonry built in cement mortar complete all as directed.
Taking down cement or cement lime plaster , any description on brick or stone walls or from ceilings etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed.
Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.
Rendering 10mm thick on ceilings or other concrete surfaces in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.
M & L for preparation of new plaster internal wall and ceiling surfaces of upto 4 storey buildings and applying a layer of 1mm thick wall care putty, again sand papering thus making surface smooth and applying Two coats of interior acrylic emulsion paint premium quality over a coat of enterior primer complete all as specified and directed.
M & L for preparation of new plaster external wall and ceiling surfaces of upto 4 storey buildings, boundary walls and applying a layer of 1mm thick wall care putty, again sand papering thus making surface smooth and applying Two coats of weather proofing exterior acrylic emulsion paint premium quality over a coat of exterior primer complete all as specified and directed.
M & L for preparation of Old plaster/unplastered surfaces of wall and ceiling surfaces of upto 4 storey buildings and applying a layer of 1mm thick wall care putty, again sand papering thus making surface smooth and applying Two coats of interior acrylic emulsion paint premium quality complete all as specified and directed.
M & L for preparation of Old plaster/unplastered surfaces of wall and ceiling surfaces of upto 4 storey buildings and applying a layer of 1mm thick wall care putty, again sand papering thus making surface smooth and applying Two coats of Oil Bound Distemper complete all as specified and directed.
M & L for preparation of Old external wall and ceiling surface including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying and applying One coats of weather proofing exterior acrylic emulsion paint premium quality complete all as specified and directed.
M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying Texture Painting on Wall/Ceiling of various pattern/design over 2-3mm thick wall care putty as directed by Engr-in-Charge and at site complete all as specified and directed.
M & L for preparation of any type of surfaces old/new or in any position and applying two coats of indigo floor paint as directed by Engr-in-Charge and at site complete (Make : Asian/Berger/Indigo)
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each complete all as specified and as directed.
Taking down shutters of any description area not exceeding 2.00 Sqm each complete all specified and as directed.
S & F for flush shutters 40 mm thick solid core constructions with block boardcore , ply wood face panels commercial type on both side complete all as specified and as directed.
S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S & F for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail, lock on either side and gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointing together with solvent cement, supplying & fixing of frame at site, complete all as specified and as directed.
S & F for Factory made solid panel PVC Moulded door shutter 28-30mm thick (style) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm thick Plain coloured PVC back face including supplying and fixing in the frame at site, complete all as specified and as directed.
S & F 100mm size medium weight cold rolled mild steel butt hinges complete all as specified and as directed.
S & F 100mm size stainless steel butt hinges complete all as specified and as directed.
S & F Aluminum Anodised 150mm size barrel tower bolt complete all as specified and as directed.
S & F 150mm size aluminum adodised handles complete all as specified and as directed.
S & F 250 mm long aluminium alloy anodised sliding door bolt with haps, stapple ( bolt type ) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extraded sections or cast aluminium alloy complete all as specified and directed.
M & L for preparation of new wooden surfaces & applying 2 coats of synthetic enemel paint over a coat of wood primer complete all as specified.
M & L for Two coats of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise described over 10 cm width or grith complete all as specified.
M & L two coat of synthetic enamel paint over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.
M & L for Two coats of synthetic enamel paint on Old steel surfaces including preparation of surfaces of any description not otherwise described over 10 cm width or grith complete all as specified and directed.
M & L for polishing to Old wooden surfaces such as door, windows and other wooden surfaces including preparation of old wooden surfaces of any description not otherwise described over 10 cm width or grith complete all as specified.
S & F Aluminium ( Die cast ) body door closer hydraclically regulated designation No. 3 universal type suitable for door shutters of 701 to 850mm in width and of weight between 61 to 80 kg, fixed in repairs, complete all as specified and as directed.
S & F floor mounter aluminum body door closer hydraclically regulated designation No. 3 universal type suitable for revolving type door of 701 to 1200mm in width and of weight between 61 to 80 kg, fixed in repairs, complete all as specified and as directed.
Aluminium alloy powder coated windows including aluminum powder coated frames sliding track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 Kg/RM double revated and 0.55Kg/RM for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete all as specified and as directed.
Aluminum alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mm x 2.1mm, shutter top section 47.62mm x 44.45mm x 1.95mm thick, shutter bottom section 114.30mm x 44.45mm x 2.15mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 2.40mm thick & glazing clips weighing not less than 0.097 Kg/RM) including shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, floor spring heavy duty “SAMRAT” , locking arrangement “GODREJ”, rubber gasket and door stopper complete all as specified and as directed.
S&F aluminium alloy powder coated glazed or skelton shutter including frame channel of section ( door frame single groove 85mmx45 mm x 1.25mm thick, shutter top section, bottom section, middle section and vertical section 65 mm x 45 mm x 1.25 mm thick and glazing clips weighing not less than 0.097 Kg/RM ) including shutter fixed to openable frame and channel as directed and as per IS specifications including S & F stainless steel wire cloth as required handles, tower bolt, door closer, locking arrangement Godrej, rubber gasket and door stopper complete.
Factory made UPVC (white/Off white colour sliding window three track made out of extruded profiles with wall thickness of members as 2.3mm (1-0.2mm). Window profile with hollow section with multi chamber frame (60mm x 62mm) sash bars (42mm x 67mm). Sliding inter lock (one vertical length in each shutter 45.5mm x 28mm). Glazing head (24.5mm x 16mm) members will be mitred, cut and fusion welded in all corners including drilling of holes for fixing hardware and drainage of water. Making arrangement for fixing of hardware, EPDM gaskets 1.2, 1-0.2mm thick galvanised steel frame (30mm x 21.50mm). Sash bars (30mm x 18mm) profile to be inserted in required profile frame and will be fixed to the wall with 8mm x 100mm long fastners. Hardware : Touch lock to be of Zinc alloy (white powder coated), Steel roller system including 5mm thick glazing with selelcted quality glass, Aluminium track on bottom rail to be of hree track sliding frame, wool pine for sliding sash and interlock, complete all as specified and as directed. complete all as specifed and as directed. (Note:The unit rate quoted by contractor includes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)
S & F sliding/openable glass door 12mm thick (Toughened glass) of approved quality including powder coated sliding rail guide clips , 250mm long stainless steel handles on both side (02 Nos for each door) , stainless steel locking arrangement complete all as specified and as directed.
S & F 12mm thick (Toughened glass) of approved quality fixed in position with necessary SS clip and fixing lugs complete all as specified.
S&F in replacement Fabrication & fixing of Modular kitchen cabinet & wardrobe/ cupboard made out of 18-20 mm thick WPC boards with 2.00mm thick fabric colour laminate sheet of approved quality and texture on all exposed sides with edge band including providing cabinet for keeping baskets/ cutlery basket etc. complete all as specified and as directed. (Design and pattern as approved by GE). (Make : Rajshree or equivalent) Note:- Kitchen accessories ie baskets, cutlery baskets, fittings and fixture will be measured and paid separately).
S & F in replacement for 18-20mm thick WPC boards with laminated fabric colour on both sides, fixing in partitions of Modular kitchen cabinet & wardrobe/ cupboard complete all as specified and as dirfected. (Make : Rajshree or equivalent)
Supply only Stainless steel basket (plain) of size 500mm x 370mm x 100mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved by Engr-in-Charge.
Supply only Stainless steel thali basket (11-13 division) of size 500mm x 370mm x 200mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS/SS galvanised over rollers as approved by Engr-in-Charge.
Supply only Stainless steel Plate basket (11-13 division) of size 500mm x 370mm x160mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS/SS galvanised over rollers as approved by Engr-in-Charge.
Supply only Stainless steel Cutlary basket of size 500mm x 370mm x 100mm made of 4mm th S.S.wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved by Engr-in-Charge.
Supply only Stainless steel bottle full out of size 500mm x 400mm x 160mm in two tier made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved by Engr-in-Charge.
S&F Continuous piano type hinges, mild steel bright finish or electro-galvanised with width of flaps 30mm, complete all as specified and as directed.
S & F for Hettich soft closure hinges of premium quality, fixed in door/cup board shutters complete all as specified and as directed
S&F Fancy type Stainless steel bright polished handles oval type of size 150mm size, complete all as specified and as directed.
S&F 50mm size cup board locks of brass, 2 levers including keys set, complete all as specified and as directed.
S & F in repairs Stainless steel Curtain Rod 20mm dia complete all as specified and as directed.
S & F in repairs Stainless Steel fancy type bracket with new screws for curtain rod complete all as specified and directed.
S&F in repair Aluminum alloy powder coated Curtain Rod 20mm dia complete all as directed.
S&F in repair Aluminum alloy powder coated fancy type bracket with new screws for curtain rod complete all as directed.
S & F designer/fancy type Stainless Steel curtain rod holder, type and pattern as approved by Engr-in-Charge or GE fixed to curtain rods complete all as specified and directed.
S & F designer/fancy type aluminium powder coated curtain rod holder, type and pattern as approved by Engr-in-Charge or GE fixed to curtain rods complete all as specified and directed.
S & F in repair 15mm bore, fancy type CP bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. (MAKE : JAQUAR/MARC/KOHLER).
S&F in repairs Pillar taps cast copper alloy fancy type chromium plated with capstan heads screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe of 15 mm bore all as specified and directed. (MAKE : JAQUAR/MARC/KOHLER).
S & F for Wall mixer 3- in - 1 system (L-bend) with provision for overhead shower complete with 115mm long bend pipe connecting legs and over head shower with all fittings and fixtures, fixed in repairs, complete all as specified and as directed. (MAKE : JAQUAR/MARC/KOHLER).
S & F for 15mm bore brass chromium plated basin mixer of mixing 'Hot' and 'Cold' water with long shank, screwed down for iron pipe, fixed in repairs, complete all as specified and as directed. (MAKE : JAQUAR/MARC/KOHLER).
S & F for Fancy type sink mixer for mixing hot and cold water with swinging port, screwed for iron pipe,15mm bore, fixed in repairs, complete all as specified and as directed. (MAKE : JAQUAR/MARC/KOHLER).
S & F in repairs 150mm x 150mm brass chromium plated shower rose with 600mm long shower arm fancy type suitable for 15mm bore GI pipe all as specified and directed. (MAKE : JAQUAR/MARC/KOHLER).
S & F in repairs 32 mm bore PVC waste pipe with fittings of approved make suitable for WHB, Urinals and Sink etc all as specified and directed.
S & F in repairs Stainless Steel grating plate with central hole 125mm dia suitable for Nahani trap or in any place complete all as specified and as directed.
S & F in repairs brass Chromium Plated bottle traps 32mm bore for wash basin with inlet & outlet, screwed for pipe or connetions including necessary packing, union & cap all as specified and directed.
S & F in repairs coloured vitrous China wash down water closet wall hung of CASCADE type wall/floor mounted closet including flushing cistern top pull slite and matching cover including fixing of bolts and flush pipe etc complete all as specified and directed.
S & F full pedestal pattern wash hand basin, size of basin 630x510 mm and pedestal of 900mm long ivory colour as approved by GE including fixing waste pipe and chromium plated brass waste fitting taking down existing wash hand basin of any type and size complete all as specified and as directed.
S & F in repairs wall mounter multiple function Shower panel including all fittings and fixtures as per product code make Jaquar/Hindware description below :- (a) Item Product code 511686 (Size-1650mmx150mmx550mm) - Make-Hindware. (b) Item Product code JPL-SSF-ST88148B. (Size-1600mmx 200mm)- Make-Jaquar. (c) Item Product Code JPL-WHT-TMCURVENEO. (Size-1500mmx230mm)-Make-Jaquar
S & F for Ready made floor/wall mounted Vanity box made of HDHMR board, both side laminated, fixed in repairs, complete all as specified and as directed. consisting of the following combination :- (a) Wash Hand Basin 810mm x 500mm. (b) Base Cabinet 780mm x 485mm x 460mm. (c) Side Cabinet 300mm x 250mm x 1800mm. (d) Mirror cabinet size 780mm x 160mm x 800mm. Make : Hindware - Cat Part No. 70089 or 70084/ Kohler : Cat Part No. K-31602IN-E63
S & F in repair vitreous china pedastal pattern water closet including flush pipe & seat cover 'P' or 'S' trap complete all as specified and directed.
S & F in repairs Sinks with drainage board made of stainsless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor on to dwarf walls or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx 160mm all as specified and directed.
S & F In repair cast copper alloy CP Health faucet with connecting pipe 1.0m long complete all as specified. (MAKE : JAQUAR/MARC/KOHLER).
S & F in repair CP Jet Spray to EWC with connecting pipe 1.00m long complete all as specified. (MAKE : JAQUAR/MARC/KOHLER).
S & F in repair Toilet paper holder chromium plated with flap all as specified and directed. (MAKE : JAQUAR/MARC/KOHLER).
S & F in repairs Chromium plated towel ring all as specified and directed. (MAKE : JAQUAR/MARC/KOHLER).
S & F in repairs Soap Dish of chromium plated all as specified and directed (MAKE : JAQUAR/MARC/KOHLER).
S & F in repairs Towel rack of size 600mm x 350mm cast copper alloy chromium plated all as specified and directed. (MAKE : JAQUAR/MARC/KOHLER).
S & F in repairs cast copper alloy Chromium plated Angle valve 15mm bore complete. (MAKE : JAQUAR/MARC/KOHLER).
S & F in repairs 2 in 1 cast copper alloy Chromium plated Angle valve 15mm bore complete. (MAKE : JAQUAR/MARC/KOHLER).
S & F in repairs glass corner shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing complete all as specified and as directed.
S & F GI tubing 15mm bore medium grade, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing and connections complete all as specified and directed.
S & F GI tubing 20mm bore medium grade, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing and connections complete all as specified and directed.
M & L 20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching and moulding including 15mm thick rendering / screed in CM 1:4 after demolition of existing granite complete all as specified and as directed .
M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6, dismantling of existing floor tiles, stone slab of any description complete all as specified and as directed.
M & L Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including cement screed 15mm thick in CM (1:6) including dismantling of existing floor tiles, stone slab of any description complete all as specified and as directed.
M & L Vitrified coloured ceramic tiles dark shade 10mm thick (square/rectangular) polished, area of tiles exc 0.42 sqm but n exc 1.00 sqm each in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 including dismantling of old tiles with backing, complete all as specified and as directed.
M & L for glazed ceramic tiles in vertical surface 300x450x8-10 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering bed in CM 1:4 including dismantling of existing floor wall , stone slab of any description complete all as specified and as directed.
M & L for glazed ceramic tiles in vertical surface 300x600x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering bed in CM 1:4 including dismantling of existing floor wall , stone slab of any description complete all as specified and as directed.
S & F for wooden coloured interlocking tiles (Wooden Flooring) 1215x168x8mm thick rectangular fixed in floor/ dado laid over existing floor with foam sheet of approved best quality including joint/ end covering strip including dismantling of old wooden flooring of any type and size all other fixing materials complete.
S & F E-board 'Everest' make 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction including taking down the existing false ceiling of any type with frame work complete all as specified and directed.
S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified.
Dismantling mild steel work of any description not otherwise provided for.
S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering complete all as specified and as directed.
S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering complete all as specified and as directed.
S & F 2-3mm thick fibre glass reinforced translucent Plain/corrugated sheeting with additional reinforcement of chicken mess with two corrugation side lap fixed with 'L' or 'J' type or crancked hook bolts including dismantling of of existing sheeting of any type complete all as specified and directed.
S & F for Solid PVC wall panelling consisting of 8-10mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site including dismantling of old wall panelling of any description, complete all as specified and as directed.
S & F in replacement 110mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls or laid in floors as sanitary fittings, rain water pipes etc in any position including taking down sanitary pipes, eaves gutters and rainwater pipes (any size or pattern), in any type and position including all fittings,heads,shoes, bends, swan-necks, branch pieces, couplers, reducers, vent cowl, stack clamps etc. complete all as specified and directed.
Taking down rolling shutters of any size gear operated type with gear box and crank handle/gear operated type with chain wheel and hand chain incl taking down complete accessories like shaft, top cover, guide channel,gear box etc complete all specified and directed.
Taking down collapsible steel gates alongwith all fittings and fixtures complete all specified and directed.
Taking down rolling shutters of any size pull push type or manual type incl taking down complete accessories like shaft, top cover, guide channel etc complete all as directed.
S & F steel rolling shutters (Push pull or manual type) 1.25 mm thickness of laths, with required ball bearing for rolling shutter including shaft, top cover, guide channel (width 75 mm deep, 50mm wide and 3.15 mm thick) anchoring rod, hasp and staple, locking arragement erected in position as indicated complete all as specified and directed.
S & F Steel rolling shutters (Gear operated)1.25mm thick with required Ball bearing for rolling shutters, including shaft, top cover, guide channel (width 75 mm deep, 50mm wide and 3.15mm thick), anchoring rod, hasp and staple erected in position as directed complete including required bevel gear box and crank handle Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.
S & F Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified.
M&L for preparation of New plastered or unplastered surfaces of walls and applying wall paper on wall/ceiling of various pattern/design as approved by GE over a coat of wall primer and 2mm thick wall care putty JK or Birla complete all as specified and as directed
M&L ATT of soil under existing floors using emulsion @ One litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floor, complete all as specified and as directed.
M&L ATT of voids in masonry using chemical emulsion @ One litre per hole, at 300mm intervals including drilling holes at 45 degree and re-plugging them with cement mortar 1:2 (1 cement : 2 Coarse sand) to match the existing floors, complete all as specified and as directed.
A R construction
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .