Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹86.4 L
EMD Value
₹90,000
Closing Date
2 Sept 2020, 3:00 pmClosed
The Project Director
DRDA Thirupathur The Project Director
Thirupathur District, Jal Jeevan Mission 20-21 Providing Founctional Household Tap Connection in Nimmiyampatti Panchayat at Alangayam Block Package No.07
2020_RDTN_176499_1
A3/1498/2019
Open Tender
Civil Works - Water Works
Item Rate
180 days
DRDA Thirupathur
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹90,000
7 Sept 2020
21 Aug 2020
2 Sept 2020
21 Aug 2020
2 Sept 2020
21 Aug 2020
Amount
Providing FHTC,Extension Pipe line and Deepening of existing borewell at Melnimmiyampattu in Nimmiyampattu panchayat.
Providing Extention of Delivery Pipe Line
75 mm PVC64KSC
75 mm bend
75 mmTee
75mm Elbow
Dismantling the existing Cement concrete pavement including all Labour charges etc ( Page 25, SL no:-34, Schedule item No:-37)
Earth work excavation and depositing on bank with initial lead and lift in all soil (30m x0.60m x1.05m)
Laying and jointing the PVC pipes & specials into trench
Refilling the trench with excavated after laying the pipe
Cement Concrete 1:4;8 mix using 40mm metal including cost and conveyance all materials to work site and all labour chargesetc.
Cement Concrete 1:2;4 mix using 20mm metal including cost and conveyance all materials to work site and all labour chargesetc.
Deepening of existing borewell and replacement of 7.50 HP new motor and Accesseries.
Three phase submersible Pumpset having duty 50LPM x 250m head 7.5HP
Three Phase Panel board 7.5HP
4.00 Sq.mm Cable
50mm GI Pipe without coupling
50mm GI Coupling
50mm GM Gate Valve
50mm GI elbow
GI Clamp Set
Bore cover plate
flange set
25mm GI pipe for EB servicing
7/20 PVC copper wire for EB servicing
7/20 GI Wire
63 A Fuse Unit
Labour Component
Flushing of borewell of 6" dia requiring less than 4 hours operation using drill roads / hose with required size of pipes for Vatious capacity compressor including transportation, labour and fuel charges for compressors etc ( 125 cfm - 100 PSI )
Drilling of 150 dia vertical bore well in hard rock rig including cost and drilling etc.,
Labour charges for motor errection
Construction of MS Kiosk
Providing New bore well and 7.50HP motor Melnimmiyampattu
Three phase submersible Pumpset having duty 50LPM x 275m head 7.5 HP
Three Phase Panel board 7.5HP
4.00 Sq.mm Cable
50mm GI Pipe without coupling
50mm GI Coupling
50mm GM Gate Valve
50mm GI Elbow
50mm Flange set
GI Clamp Set
Bore cover plate
25mm GI Pipe for EB Servicing
7/20 PVC Copper Wire for EB Servicing
7/20 GI Wire
63 Amps Fuse unit
90mm PVC pipe 6 ksc
Construction of Masonry pedestal for Kiosk including cost MS Kiosk and fitting as per type design
Labour Component
Drilling of 150 dia vertical bore well in hard rock rig including cost and drilling etc.,
Drilling of 150 dia vertical bore well in hard rock rig including cost and drilling etc.,
Labour charges for errection of Three phase pumpset with GI pipe & cable connection complete.
Earth work Excavation including lead and fit
Labour charge for laying of PVC pipe & specials connection
Refilling the excavated earth into the trench
Providing FHTCs (8m length per FHTC)
HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm
Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm
Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)
Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm
Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm
Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm
MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm
Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)
Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber
Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection
Supply & Jointing 20 mm SS/brass tap (Local rate)
U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm
BT ROAD / WBM ROAD CUTTING CHARGES
Labour charges for Drilling,Cutting and fixing ferrules in distribution line
Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc
cutting MDPE Pipes and specials true axis and finishing the end complete
Supply and laying of Pumping main line
Supply 90mm PVC Pipe (6KSC) line from Borewell to OHT
Earthwork excavation and depositing on bank with initial lead and lift in all soil
Laying and jointing the PVC Pipes & specials into trench
Supply 90mm PVC Tee
Supply 90mm PVC Elbow
Supply 90mm PVC Bend
Supply 80mm GM Gate Valve
Refilling the trenches with available excavated soil(other than sand) in layers of notmore than 15cm thick watering ,consolidating,complying with standard specification and as directed by TWAD Board Officers.etc., complete
Water meter Pumping main line
Provision for water meter 50 mm , page 81 of SOR TWAD
Dirt box
Fitting Charges of Meter in OHT Column
Water meter Distribution of Main line
Provision for 50 mm Water meter - TWAD SOR PAGE 81 , 16 clause
Water meter Dirt BOX
Water meter erection charges
Provision for pit for Water meter 90X75cm
Electro Chloranation Disinfection - common salt as per TWAD SOR - page no -57 clause 21.2/ for OHT
Providing FHTCs and Extension Pipe line at Beligan Vattam in Nimmiyampattu panchayat.
Providing Extention of Delivery Pipe Line.
75 mm PVC 4KSC
75 mm bend
75 mmTee
75mm Elbow
Dismantling the existing Cement concrete pavement including all Labour charges etc ( Page 25, SL no:-34, Schedule item No:-37)
Earth work excavation and depositing on bank with initial lead and lift in all soil (30m x0.60m x1.05m)
Laying and jointing the PVC pipes & specials into trench
Refilling the trench with excavated after laying the pipe
Cement Concrete 1:4;8 mix using 40mm metal including cost and conveyance all materials to work site and all labour chargesetc.
Cement Concrete 1:2;4 mix using 20mm metal including cost and conveyance all materials to work site and all labour chargesetc.
Providing FHTCs (8m length per FHTC)
HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm
Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm
Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)
Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm
Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm
Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm
MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm
Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)
Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber
Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection
Supply & Jointing 20 mm SS/brass tap (Local rate)
U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm
BT ROAD / WBM ROAD CUTTING CHARGES
Labour charges for Drilling,Cutting and fixing ferrules in distribution line
Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc
cutting MDPE Pipes and specials true axis and finishing the end complete
Supply and laying of Pumping main line
Supply 90mm PVC Pipe (6KSC) line from Borewell to OHT
Earthwork excavation and depositing on bank with initial lead and lift in all soil
Laying and jointing the PVC Pipes & specials into trench
Supply 80mm GM Gate Valve
Supply 90mm PVC Tee
Supply 90mm PVC Elbow
Supply 90mm PVC Bend
Refilling the trenches with available excavated soil(other than sand) in layers of notmore than 15cm thick watering ,consolidating,complying with standard specification and as directed by TWAD Board Officers.etc., complete
Water meter Pumping main line
Provision for water meter 50 mm , page 81 of SOR TWAD
Dirt box
Fitting Charges of Meter in OHT Column
Water meter Distribution of Main line
Provision for 50 mm Water meter - TWAD SOR PAGE 81 , 16 clause
Water meter Dirt BOX
Water meter erection charges
Provision for pit for Water meter 90X75cm
Electro Chloranation Disinfection - common salt as per TWAD SOR - page no -57 clause 21.2/ for OHT
Providing FHTCs , Extension Pipe line, New Borewell, New Reservoirs - 30000 Litres capacity and Deepening of existing borewell at Pananthoppu in Nimmiyampattu panchayat.
Construction of New Reservoirs - 30000 Litres
Earth work excavation below G.L. and depositing on bank within an initial lead of 10.00 m and an initial lift of 2.00 for the following classification of soil Second depth of 2.00 m
Second depth of 2.00m to 3.00m
Sand filling for foundation with clear river sand including cost of sand,watering,ramming and consolidation etc complete as directed by TWAD Bord officers
PCC 1:4:8 using 40mm HBG metal including mixing curing etc.,below 1.50 m from GL.
RCC in M 30 mix using10mm& 20mm size HBG metal excluding cost of reinforcement and centering but including cost of mixing, laying, curing, finishing etc.complete
Below 1.5m from GL Column footing
0m to 1.50m below GL
0m to 1.00m above GL
1.00m to 4.50m above GL
4.50 m to7.32 m above GL
7.32 m to10.98 m above GL
10.98 m to14.64 m above GL
Steel Centering, soffits of RCC works including strutting and shuttertting Charges etc. complete for the following Plain Surface
Below GL
Square Column Below GL and upto 3.30m
5.31m to 6.30m ht
8.31m to 9.30m ht
11.31m to 12.30m ht
Square column
Square Column Below GL and upto 3.30m above GL
3.31m to 4.30m ht
4.31m to 5.30m ht
5.31m to 6.30m ht
6.30m to 7.30m ht
7.30m to8.30m ht
8.30m to 9.30m ht
9.31m to 10.30m ht
10.31m to 11.30m ht
11.31m to 12.30m ht
curved surface up to 3.30m ht
11.30m to 12.30m ht
12.31m to 13.30m ht
13.31m to 14.30m ht
14.31m to 15.30m ht
Supply, fabrication, placing in position of steel rods cutting tying etc. complete including cost of reinforcement RTS rods.
Painting two coatsto the exposed surface of SR using cement paint
Providing M.S Ladder of 45cm wide made out of 50x50x6mm MS angle for sides and steps in 16mm MS plain rods fixed at 30 cm centre to centre etc as per approved design
Providing and fixing of RCC inner access ladder in RCC 1:1.5:3 (One cement, one and half sand and three aggregates) using 20mm HBG stone for OHT including cost of reinforcement, placing grill in position, centering shuttering charges, mixing concrete curi
Providing and fixing of PVC Ventilating Arrangement mosquito proof nylon net with 110 mm PVC Cowl
Providing cut stone slab in CM 1:3 of size 0.3 m x 0.3 m x 0.15 m and as directed by officers
Providing manhole cover of size 0.60 x 0.60M in RCC 1:1.5:3 with suitable reinforcement and 50x50x6mm MS angle fixed along edges and as directed by officers
Painting TWAD Board emblem on the SR with enamel paint as per Board's specification and as directed by TWAD Board officers
Construction of Community Soakpit Arrengements
Earthork excavation and depositing on bank with an initial lead and lift etc
Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete for 10 cum
Brick work in cm 1:5,mix using country briks etc
supply and filling of 20mm metal from approed quarry including cost and conveyance etc
225mm metal
65mm/63mm metal
20mm metal
supply of 0.60m dia cment rings with cover including cost and conveyance etc
cover slab
Plastering with cm 1:5mix using 12mm thick etc
supply of 90mm dia PVC Pipe including necessary joint inspection chamber etc
Providing Anticorrosive painting
Provision for levelling the site
Provision for pipe connection arrangements for inlet, outlet scour and overflow etc. including cost of pipes, specials, valve, labour charge for lifting, aligning, cutting, threading, fixing and painting of GI pipes with two coats of approved quality enam
65mm GI pipes for inlet connection
65mm GI pipes for over flow & rain water harvesting pipe
50mm GI pipes for scour pipe
65mm GI pipe for delivery pipe
90mm PVC Threaded coupler
63mm PVC Threaded coupler
65mm dia GI Tee
65mm dia GI bend 90
65mm dia GI bend (short)
65mm GI coupler
65mm GI union
65mm GI Elbow
50mm GI union
50mm GI Elbow
65mm GI Tee
65x50mm GI reducer
75mmx63mm PVC reducer
65mm GM gate valve
50mm GM gate valve
63 mm PVC 4Ksc Pipe
Refilling the foundation with excavated earth including consolidation as directed by the officers
Labour charges for GI pipe connection to the OHT, for inlet, outlet, overflow and scour arrangements including cutting and threading, earth work excavation & refilling.
Providing Hand rails over the Roof slab by using 32 mm GI Pipe with 40mm x 6mm MS Flat and fixied with 12mm dia Fastner Bolt 75mm long and as directed by TWAD Bd officers
Providing Extention of Delivery Pipe Line
75 mm PVC 4KSC
75 mm bend
75 mmTee
75mm Elbow
Dismantling the existing Cement concrete pavement including all Labour charges etc ( Page 25, SL no:-34, Schedule item No:-37)
Earth work excavation and depositing on bank with initial lead and lift in all soil (30m x0.60m x1.05m)
Laying and jointing the PVC pipes & specials into trench
Refilling the trench with excavated after laying the pipe
Cement Concrete 1:4;8 mix using 40mm metal including cost and conveyance all materials to work site and all labour chargesetc.
Cement Concrete 1:2;4 mix using 20mm metal including cost and conveyance all materials to work site and all labour chargesetc.
Providing New bore well and new motor and GI pipes and Extention of pipe line
Supply and fixing of 180 mm dia Pvc casing pipe
Three phase submersible Pumpset having duty 50LPM x 275m head 7.5 HP
Three Phase Panel board 7.5HP
4.00 Sq.mm Cable
50mm GI Pipe without coupling
50mm GI Coupling
50mm GM Gate Valve
50mm GI Elbow
50mm Flange set
GI Clamp Set
Bore cover plate
25mm GI Pipe for EB Servicing
7/20 PVC Copper Wire for EB Servicing
7/20 GI Wire
63 Amps Fuse unit
75mm PVC pipe 6 ksc
Construction of Masonry pedestal for Kiosk including cost MS Kiosk and fitting as per type design
Labour Component
Drilling of 150 dia vertical bore well in hard rock rig including cost and drilling etc.,
Drilling of 150 dia vertical bore well in hard rock rig including cost and drilling etc.,
Labour charges for errection of Three phase pumpset with GI pipe & cable connection complete.
Earth work Excavation including lead and fit
Labour charge for laying of PVC pipe & specials connection
Refilling the excavated earth into the trench
Deepening of existing borewell and replacement of 7.50 HP new motor and Accesseries.
Three phase submersible Pumpset having duty 50LPM x 250m head 7.5HP
Three Phase Panel board 7.5HP
4.00 Sq.mm Cable
50mm GI Pipe without coupling
50mm GI Coupling
50mm GM Gate Valve
50mm GI elbow
GI Clamp Set
Bore cover plate
25mm GI pipe for EB servicing
7/20 PVC copper wire for EB servicing
7/20 GI Wire
63 A Fuse Unit
Labour Component
Flushing of borewell of 6" dia requiring less than 4 hours operation using drill roads / hose with required size of pipes for Vatious capacity compressor including transportation, labour and fuel charges for compressors etc ( 125 cfm - 100 PSI )
Drilling of 150 dia vertical bore well in hard rock rig including cost and drilling etc.,
Construction of MS Kiosk
Labour charges for motor errection
Providing FHTCs (8m length per FHTC)
HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm
Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm
Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)
Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm
Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm
Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm
MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm
Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)
Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber
Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection
Supply & Jointing 20 mm SS/brass tap (Local rate)
U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm
BT ROAD / WBM ROAD CUTTING CHARGES
Labour charges for Drilling,Cutting and fixing ferrules in distribution line
Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc
cutting MDPE Pipes and specials true axis and finishing the end complete
Supply and laying of Pumping main line
Supply 90mm PVC Pipe (6KSC) line from Borewell to OHT .
Earthwork excavation and depositing on bank with initial lead and lift in all soil
Laying and jointing the PVC Pipes & specials into trench
90mm PVC Tee
90mm PVC Elbow
90mm PVC Bend
Supply 80mm GM Gate Valve
Refilling the trenches with available excavated soil(other than sand) in layers of notmore than 15cm thick watering ,consolidating,complying with standard specification and as directed by TWAD Board Officers.etc., complete
Water meter Pumping main line
Provision for water meter 50 mm , page 81 of SOR TWAD
Dirt box
Fitting Charges of Meter in OHT Column
Water meter Distribution of Main line
Provision for 50 mm Water meter - TWAD SOR PAGE 81 , 16 clause
Water meter Dirt BOX
Water meter erection charges
Provision for pit for Water meter 90X75cm
Electro Chloranation Disinfection - common salt as per TWAD SOR - page no -57 clause 21.2/ for OHT
GST Amount for providing service to Government contract works for the above construction works. { GST amount is the Total GST amount for total overall quoted amount above this row in column "BB" for all works in this package}
GSK CONSTRUCTIONS
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .